In order to eventually have each trace_array instance have its own unique
set of function probes (triggers), the trace array needs to hold the ops and
the filters for the probes.

This is the first step to accomplish this. Instead of having the private
data of the probe ops point to the trace_array, create a separate list that
the trace_array holds. There's only one private_data for a probe, we need
one per trace_array. The probe ftrace_ops will be dynamically created for
each instance, instead of being static.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Pass the trace_array associated to a ftrace_probe_ops into the probe_ops
func(), init() and free() functions. The trace_array is the descriptor that
describes a tracing instance. This will help create the infrastructure that
will allow having function probes unique to tracing instances.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Add a link list to the trace_array to hold func probes that are registered.
Currently, all function probes are the same for all instances as it was
before, that is, only the top level trace_array holds the function probes.
But this lays the ground work to have function probes be attached to
individual instances, and having the event trigger only affect events in the
given instance. But that work is still to be done.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

If the ftrace_hash_move_and_update_ops() fails, and an ops->free() function
exists, then it needs to be called on all the ops that were added by this
registration.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Now that the function probes have their own ftrace_ops, there's no reason to
continue using the ftrace_func_hash to find which probe to call in the
function callback. The ops that is passed in to the function callback is
part of the probe_ops to call.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Have the function probes have their own ftrace_ops, and remove the
trace_probe_ops. This simplifies some of the ftrace infrastructure code.

Individual entries for each function is still allocated for the use of the
output for set_ftrace_filter, but they will be removed soon too.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Currently unregister_ftrace_function_probe_func() is a void function. It
does not give any feedback if an error occurred or no item was found to
remove and nothing was done.

Change it to return status and success if it removed something. Also update
the callers to return that feedback to the user.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The processes of updating a ops filter_hash is a bit complex, and requires
setting up an old hash to perform the update. This is done exactly the same
in two locations for the same reasons. Create a helper function that does it
in one place.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

No users of the function probes uses the data field anymore. Remove it, and
change the init function to take a void *data parameter instead of a
void **data, because the init will just get the data that the registering
function was received, and there's no state after it is called.

The other functions for ftrace_probe_ops still take the data parameter, but
it will currently only be passed NULL. It will stay as a parameter for
future data to be passed to these functions.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

None of the probe users uses the data field anymore of the entry. They all
have their own print() function. Remove showing the data field in the
generic function as the data field will be going away.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

There are no users of unregister_ftrace_function_probe_all(). The only probe
function that is used is unregister_ftrace_function_probe_func(). Rename the
internal static function __unregister_ftrace_function_probe() to
unregister_ftrace_function_probe_func() and make it global.

Also remove the PROBE_TEST_FUNC as it would be always set.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Nothing calls unregister_ftrace_function_probe(). Remove it as well as the
flag PROBE_TEST_DATA, as this function was the only one to set it.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the rest of the function
trigger counters over to the new ftrace_func_mapper helper functions.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As the data pointer for individual ips will soon be removed and no longer
passed to the callback function probe handlers, convert the snapshot
trigger counter over to the new ftrace_func_mapper helper functions.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to move the ops to the function probes directly, they need a way to
map function ips to their own data without depending on the infrastructure
of the function probes, as the data field will be going away.

New helper functions are added that are based on the ftrace_hash code.
ftrace_func_mapper functions are there to let the probes map ips to their
data. These can be allocated by the probe ops, and referenced in the
function callbacks.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In preparation to cleaning up the probe function registration code, the
"data" parameter will eventually be removed from the probe->func() call.
Instead it will receive its own "ops" function, in which it can set up its
own data that it needs to map.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Nothing uses "flags" in the ftrace_func_probe descriptor. Remove it.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As nothing outside the tracing directory uses the function command mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the command functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

As nothing outside the tracing directory uses the function probes mechanism,
I'm moving the prototypes out of the include/linux/ftrace.h and into the
local kernel/trace/trace.h header. I plan on making them hook to the
trace_array structure which is local to kernel/trace, and I do not want to
expose it to the rest of the kernel. This requires that the probe functions
must also be local to tracing. But luckily nothing else uses them.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The set_ftrace_file lists both functions that are filtered, as well as
function probes (triggers) that are attached to a function, like traceon or
stacktrace, etc. The reading of this file is not as trivial as most pseudo
files are, and there's been various bugs that have appeared in the past
when there's a mix of probes and functions listed. There's also a difference
when reading the file using dd with a block size of 1.

This test performs the following:

 o Resets set_ftrace_filter

 o Makes sure only "#### all functions enabled ####" is listed

    (All checks uses cat, and dd with bs=1 and bs=100)

 o Adds a traceon trigger to schedule

 o Checks if only "#### all function enabled ####" and the trigger is there.

 o Adds tracing of schedule

 o Checks if only schedule and the trigger is there

 o Adds tracing of do_IRQ as well

 o Checks if only schedule, do_IRQ and the trigger is there

 o Adds a traceon trigger to do_IRQ

 o Checks if only schedule, do_IRQ and both triggers are there

 o Removes tracing of do_IRQ

 o Checks if only schedule and both triggers are there

 o Removes tracing of schedule

 o Checks if only  "#### all functions enabled ####" and both triggers are there

 o Removes the triggers

 o Checks if only "#### all functions enabled ####" is there

 o Adds tracing of schedule

 o Checks if only schedule is there

 o Adds tracing of do_IRQ

 o Checks if only schedule and do_IRQ are there
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

This adds a test to test the function tiggers traceon and traceoff to make
sure that it starts and stops tracing when a function is hit.

The test performs the following:

 o Enables all events

 o Writes schedule:traceoff into set_ftrace_filter

 o Makes sure the tigger exists in the file

 o Makes sure the trace file no longer grows

 o Makes sure that tracing_on is now zero

 o Clears the trace file

 o Makes sure it's still empty

 o Removes the trigger

 o Makes sure tracing is still off (tracing_on is zero)

 o Writes schedule:traceon into set_ftrace_filter

 o Makes sure the trace file is no longer empty

 o Makes sure that tracing_on file is set to one

 o Removes the trigger

 o Makes sure the trigger is no longer there

 o Writes schedule:traceoff:3 into set_ftrace_filter

 o Makes sure that tracing_on turns off

   . Writes 1 into tracing_on

   . Makes sure that it turns off 2 more times

 o Writes 1 into tracing_on

 o Makes sure that tracing_on is still a one
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

This adds a test to enable and disable trace events via the function
triggers. It tests enabling and disabling the sched:sched_switch event via
the the event_enable and event_disable function triggers attached to the
schedule() kernel function.

The test does the following:

 o disable all events

 o disables or enables the sched_switch event

 o writes schedule:event_enable/disable:sched:sched_switch into set_ftrace_filter

 o 5 times it checks to make sure:

    . Writes 0/1 into the sched_switch/enable

    . Checks that the sched_switch/enable goes back to 1/0

 o Resets the events

 o writes schedule:event_enable/disable:sched:sched_switch:3 into set_ftrace_filter

 o Does a loop of 3 to see that sched_switch/enable file gets updated

 o Makes sure the sched_switch/enable stops getting updated
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Just writing into the set_ftrace_filter file does not reset triggers, even
though it can reset the function list. Triggers require writing the trigger
name with a "!" prepended. It's worse that it requires the number if the
trigger has a count associated to it.

Add a reset_ftrace_filter function to the ftrace self tests to allow for the
tests to have a generic way to clear them. It also resets any functions that
are listed in that file as well.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In my virtual machine setup, running ftracetest failed on creating
LOG_DIR on a read-only filesystem.  It'd be convenient to provide an
option to specify a different directory as log directory.

Link: http://lkml.kernel.org/r/20170417024430.21194-4-namhyung@kernel.org

Cc: Ingo Molnar <mingo@kernel.org>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The function-fork option is same as event-fork that it tracks task
fork/exit and set the pid filter properly.  This can be useful if user
wants to trace selected tasks including their children only.

Link: http://lkml.kernel.org/r/20170417024430.21194-3-namhyung@kernel.orgSigned-off-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The trace_event benchmark thread runs in kernel space in an infinite loop
while also calling cond_resched() in case anything else wants to schedule
in. Unfortunately, on a PREEMPT kernel, that makes it a nop, in which case,
this will never voluntarily schedule. That will cause synchronize_rcu_tasks()
to forever block on this thread, while it is running.

This is exactly what cond_resched_rcu_qs() is for. Use that instead.
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

t_hash_start() does not increment *pos, where as t_next() must. But when
t_next() does increment *pos, it must still pass in the original *pos to
t_hash_start() otherwise it will skip the first instance:

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo call_rcu > set_ftrace_filter
 # cat set_ftrace_filter
call_rcu
schedule:traceoff:unlimited
do_IRQ:traceoff:unlimited

The above called t_hash_start() from t_start() as there was only one
function (call_rcu), but if we add another function:

 # echo xfrm_policy_destroy_rcu >> set_ftrace_filter
 # cat set_ftrace_filter
call_rcu
xfrm_policy_destroy_rcu
do_IRQ:traceoff:unlimited

The "schedule:traceoff" disappears.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.

This is easily reproducable by adding two probes, removing one, and then
adding it back again.

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter

Causes:
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
 Modules linked in: [...]
 CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 Call Trace:
  dump_stack+0x68/0x9f
  __warn+0x111/0x130
  ? trace_irq_work_interrupt+0xa0/0xa0
  warn_slowpath_null+0x1d/0x20
  ftrace_get_addr_curr+0x143/0x220
  ? __fentry__+0x10/0x10
  ftrace_replace_code+0xe3/0x4f0
  ? ftrace_int3_handler+0x90/0x90
  ? printk+0x99/0xb5
  ? 0xffffffff81000000
  ftrace_modify_all_code+0x97/0x110
  arch_ftrace_update_code+0x10/0x20
  ftrace_run_update_code+0x1c/0x60
  ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
  register_ftrace_function_probe+0x4b6/0x590
  ? ftrace_startup+0x310/0x310
  ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
  ? update_stack_state+0x88/0x110
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? preempt_count_sub+0x18/0xd0
  ? mutex_lock_nested+0x104/0x800
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? __unwind_start+0x1c0/0x1c0
  ? _mutex_lock_nest_lock+0x800/0x800
  ftrace_trace_probe_callback.isra.3+0xc0/0x130
  ? func_set_flag+0xe0/0xe0
  ? __lock_acquire+0x642/0x1790
  ? __might_fault+0x1e/0x20
  ? trace_get_user+0x398/0x470
  ? strcmp+0x35/0x60
  ftrace_trace_onoff_callback+0x48/0x70
  ftrace_regex_write.isra.43.part.44+0x251/0x320
  ? match_records+0x420/0x420
  ftrace_filter_write+0x2b/0x30
  __vfs_write+0xd7/0x330
  ? do_loop_readv_writev+0x120/0x120
  ? locks_remove_posix+0x90/0x2f0
  ? do_lock_file_wait+0x160/0x160
  ? __lock_is_held+0x93/0x100
  ? rcu_read_lock_sched_held+0x5c/0xb0
  ? preempt_count_sub+0x18/0xd0
  ? __sb_start_write+0x10a/0x230
  ? vfs_write+0x222/0x240
  vfs_write+0xef/0x240
  SyS_write+0xab/0x130
  ? SyS_read+0x130/0x130
  ? trace_hardirqs_on_caller+0x182/0x280
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL_64_fastpath+0x18/0xad
 RIP: 0033:0x7fe61c157c30
 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
  ? trace_hardirqs_off_caller+0xc0/0x110
 ---[ end trace 99fa09b3d9869c2c ]---
 Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)

Cc: stable@vger.kernel.org
Fixes: 59df055f ("ftrace: trace different functions with a different tracer")
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Stack tracing discovered that there's a small location inside the RCU
infrastructure where calling rcu_irq_enter() does not work. As trace events
use rcu_irq_enter() it must make sure that it is functionable. A check
against rcu_irq_enter_disabled() is added with a WARN_ON_ONCE() as no trace
event should ever be used in that part of RCU. If the warning is triggered,
then the trace event is ignored.

Restructure the __DO_TRACE() a bit to get rid of the prercu and postrcu,
and just have an rcucheck that does the work from within the _DO_TRACE()
macro. gcc optimization will compile out the rcucheck=0 case.

Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.homeAcked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Tracing uses rcu_irq_enter() as a way to make sure that RCU is watching when
it needs to use rcu_read_lock() and friends. This is because tracing can
happen as RCU is about to enter user space, or about to go idle, and RCU
does not watch for RCU read side critical sections as it makes the
transition.

There is a small location within the RCU infrastructure that rcu_irq_enter()
itself will not work. If tracing were to occur in that section it will break
if it tries to use rcu_irq_enter().

Originally, this happens with the stack_tracer, because it will call
save_stack_trace when it encounters stack usage that is greater than any
stack usage it had encountered previously. There was a case where that
happened in the RCU section where rcu_irq_enter() did not work, and lockdep
complained loudly about it. To fix it, stack tracing added a call to be
disabled and RCU would disable stack tracing during the critical section
that rcu_irq_enter() was inoperable. This solution worked, but there are
other cases that use rcu_irq_enter() and it would be a good idea to let RCU
give a way to let others know that rcu_irq_enter() will not work. For
example, in trace events.

Another helpful aspect of this change is that it also moves the per cpu
variable called in the RCU critical section into a cache locale along with
other RCU per cpu variables used in that same location.

I'm keeping the stack_trace_disable() code, as that still could be used in
the future by places that really need to disable it. And since it's only a
static inline, it wont take up any kernel text if it is not used.

Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.homeAcked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The tracing subsystem started using rcu_irq_entry() and rcu_irq_exit()
(with my blessing) to allow the current _rcuidle alternative tracepoint
name to be dispensed with while still maintaining good performance.
Unfortunately, this causes RCU's dyntick-idle entry code's tracing to
appear to RCU like an interrupt that occurs where RCU is not designed
to handle interrupts.

This commit fixes this problem by moving the zeroing of ->dynticks_nesting
after the offending trace_rcu_dyntick() statement, which narrows the
window of vulnerability to a pair of adjacent statements that are now
marked with comments to that effect.

Link: http://lkml.kernel.org/r/20170405093207.404f8deb@gandalf.local.home
Link: http://lkml.kernel.org/r/20170405193928.GM1600@linux.vnet.ibm.comReported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

In order to eliminate a function call, make "trace_active" into
"disable_stack_tracer" and convert stack_tracer_disable() and friends into
static inline functions.
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

There are certain parts of the kernel that cannot let stack tracing
proceed (namely in RCU), because the stack tracer uses RCU, and parts of RCU
internals cannot handle having RCU read side locks taken.

Add stack_tracer_disable() and stack_tracer_enable() functions to let RCU
stop stack tracing on the current CPU when it is in those critical sections.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The updates to the trace_active per cpu variable can be updated with the
__this_cpu_*() functions as it only gets updated on the CPU that the variable
is on.

Thanks to Paul McKenney for suggesting __this_cpu_* instead of this_cpu_*.
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The function tracer needs to be more careful than other subsystems when it
comes to freeing data. Especially if that data is actually executable code.
When a single function is traced, a trampoline can be dynamically allocated
which is called to jump to the function trace callback. When the callback is
no longer needed, the dynamic allocated trampoline needs to be freed. This
is where the issues arise. The dynamically allocated trampoline must not be
used again. As function tracing can trace all subsystems, including
subsystems that are used to serialize aspects of freeing (namely RCU), it
must take extra care when doing the freeing.

Before synchronize_rcu_tasks() was around, there was no way for the function
tracer to know that nothing was using the dynamically allocated trampoline
when CONFIG_PREEMPT was enabled. That's because a task could be indefinitely
preempted while sitting on the trampoline. Now with synchronize_rcu_tasks(),
it will wait till all tasks have either voluntarily scheduled (not on the
trampoline) or goes into userspace (not on the trampoline). Then it is safe
to free the trampoline even with CONFIG_PREEMPT set.
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).

But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events

The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.

This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.

I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.

This patch includes a basic selftest:

> # ./ftracetest -v  test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing	[PASS]
> [2] Kprobe dynamic event - busy event check	[PASS]
> [3] Kprobe dynamic event with arguments	[PASS]
> [4] Kprobes event arguments with types	[PASS]
> [5] Kprobe dynamic event with function tracer	[PASS]
> [6] Kretprobe dynamic event with arguments	[PASS]
> [7] Kretprobe dynamic event with maxactive	[PASS]
>
> # of passed:  7
> # of failed:  0
> # of unresolved:  0
> # of untested:  0
> # of unsupported:  0
> # of xfailed:  0
> # of undefined(test bug):  0

BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.ioAcked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NAlban Crequy <alban@kinvolk.io>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

Relying on free_reserved_area() to call ftrace to free init memory proved to
not be sufficient. The issue is that on x86, when debug_pagealloc is
enabled, the init memory is not freed, but simply set as not present. Since
ftrace was uninformed of this, starting function tracing still tries to
update pages that are not present according to the page tables, causing
ftrace to bug, as well as killing the kernel itself.

Instead of relying on free_reserved_area(), have init/main.c call ftrace
directly just before it frees the init memory. Then it needs to use
__init_begin and __init_end to know where the init memory location is.
Looking at all archs (and testing what I can), it appears that this should
work for each of them.
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

I noticed that if I use dd to read the set_ftrace_filter file that the first
hash command is repeated.

 # cd /sys/kernel/debug/tracing
 # echo schedule > set_ftrace_filter
 # echo do_IRQ >> set_ftrace_filter
 # echo schedule:traceoff >> set_ftrace_filter
 # echo do_IRQ:traceoff >> set_ftrace_filter

 # cat set_ftrace_filter
 schedule
 do_IRQ
 schedule:traceoff:unlimited
 do_IRQ:traceoff:unlimited

 # dd if=set_ftrace_filter bs=1
 schedule
 do_IRQ
 schedule:traceoff:unlimited
 schedule:traceoff:unlimited
 do_IRQ:traceoff:unlimited
 98+0 records in
 98+0 records out
 98 bytes copied, 0.00265011 s, 37.0 kB/s

This is due to the way t_start() calls t_next() as well as the seq_file
calls t_next() and the state is slightly different between the two. Namely,
t_start() will call t_next() with a local "pos" variable.

By separating out the function listing from t_next() into its own function,
we can have better control of outputting the functions and the hash of
triggers. This simplifies the code.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

If all functions are enabled, there's a comment displayed in the file to
denote that:

  # cd /sys/kernel/debug/tracing
  # cat set_ftrace_filter
 #### all functions enabled ####

If a function trigger is set, those are displayed as well:

  # echo schedule:traceoff >> /debug/tracing/set_ftrace_filter
  # cat set_ftrace_filter
 #### all functions enabled ####
 schedule:traceoff:unlimited

But if you read that file with dd, the output can change:

  # dd if=/debug/tracing/set_ftrace_filter bs=1
 #### all functions enabled ####
 32+0 records in
 32+0 records out
 32 bytes copied, 7.0237e-05 s, 456 kB/s

This is because the "pos" variable is updated for the comment, but func_pos
is not. "func_pos" is used by the triggers (or hashes) to know how many
functions were printed and it bases its index from the pos - func_pos.
func_pos should be 1 to count for the comment printed. But since it is not,
t_hash_start() thinks that one trigger was already printed.

The cat gets to t_hash_start() via t_next() and not t_start() which updates
both pos and func_pos.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>

The loop in t_start() of calling t_next() will call t_hash_start() if the
pos is beyond the functions and enters the hash items. There's no reason to
check if p is NULL and call t_hash_start(), as that would be redundant.
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>