Before this patch function gfs2_write_begin, upon discovering an
error, called gfs2_trim_blocks while the rgrp glock was still held.
That's because gfs2_inplace_release is not called until later.
This patch reorganizes the logic a bit so gfs2_inplace_release
is called to release the lock prior to the call to gfs2_trim_blocks,
thus preventing the glock recursion.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

GFS2 keeps two arrarys in the superblock that define the maximum size of
an inode depending on the inode's height: sdp->sd_heightsize defines the
heights in units of sb->s_blocksize; sdp->sd_jheightsize defines them in
units of sb->s_blocksize - sizeof(struct gfs2_meta_header).  These
arrays are used to determine when additional layers of indirect blocks
are needed.  The second array is used for directories which have an
additional gfs2_meta_header at the beginning of each block.

Distinguishing between these two cases makes no sense: the height
required for representing N blocks will come out the same no matter if
the calculation is done in gross (sb->s_blocksize) or net
(sb->s_blocksize - sizeof(struct gfs2_meta_header)) units.

Stuffed directories don't have an additional gfs2_meta_header, but the
stuffed case is handled separately for both files and directories,
anyway.

Remove the unncessary sdp->sd_jheightsize array.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

This patch simply fixes some comments and the gfs2-glocks.txt file:
Places where i_rwsem was called i_mutex, and adding i_rw_mutex.
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Function rhashtable_walk_peek is problematic because there is no
guarantee that the glock previously returned still exists; when that key
is deleted, rhashtable_walk_peek can end up returning a different key,
which will cause an inconsistent glock dump.  Fix this by keeping track
of the current glock in the seq file iterator functions instead.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NBob Peterson <rpeterso@redhat.com>

Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root.  Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.

[willy@infradead.org: fix nds32, fs/dax.c]
  Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Acked-by: NJeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This results in no change in structure size on 64-bit machines as it
fits in the padding between the gfp_t and the void *.  32-bit machines
will grow the structure from 8 to 12 bytes.  Almost all radix trees are
protected with (at least) a spinlock, so as they are converted from
radix trees to xarrays, the data structures will shrink again.

Initialising the spinlock requires a name for the benefit of lockdep, so
RADIX_TREE_INIT() now needs to know the name of the radix tree it's
initialising, and so do IDR_INIT() and IDA_INIT().

Also add the xa_lock() and xa_unlock() family of wrappers to make it
easier to use the lock.  If we could rely on -fplan9-extensions in the
compiler, we could avoid all of this syntactic sugar, but that wasn't
added until gcc 4.6.

Link: http://lkml.kernel.org/r/20180313132639.17387-8-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NJeff Layton <jlayton@kernel.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Don't open-code accesses to data structure internals.

Link: http://lkml.kernel.org/r/20180313132639.17387-7-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

XFS currently contains a copy-and-paste of __set_page_dirty().  Export
it from buffer.c instead.

Link: http://lkml.kernel.org/r/20180313132639.17387-6-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Acked-by: NJeff Layton <jlayton@kernel.org>
Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Anshuman has reported that with "fs, elf: drop MAP_FIXED usage from
elf_map" applied, some ELF binaries in his environment fail to start
with

 [   23.423642] 9148 (sed): Uhuuh, elf segment at 0000000010030000 requested but the memory is mapped already
 [   23.423706] requested [10030000, 10040000] mapped [10030000, 10040000] 100073 anon

The reason is that the above binary has overlapping elf segments:

  LOAD           0x0000000000000000 0x0000000010000000 0x0000000010000000
                 0x0000000000013a8c 0x0000000000013a8c  R E    10000
  LOAD           0x000000000001fd40 0x000000001002fd40 0x000000001002fd40
                 0x00000000000002c0 0x00000000000005e8  RW     10000
  LOAD           0x0000000000020328 0x0000000010030328 0x0000000010030328
                 0x0000000000000384 0x00000000000094a0  RW     10000

That binary has two RW LOAD segments, the first crosses a page border
into the second

  0x1002fd40 (LOAD2-vaddr) + 0x5e8 (LOAD2-memlen) == 0x10030328 (LOAD3-vaddr)

Handle this situation by enforcing MAP_FIXED when we establish a
temporary brk VMA to handle overlapping segments.  All other mappings
will still use MAP_FIXED_NOREPLACE.

Link: http://lkml.kernel.org/r/20180213100440.GM3443@dhcp22.suse.czSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Cc: Andrei Vagin <avagin@openvz.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Kees Cook <keescook@chromium.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both load_elf_interp and load_elf_binary rely on elf_map to map segments
on a controlled address and they use MAP_FIXED to enforce that.  This is
however dangerous thing prone to silent data corruption which can be
even exploitable.

Let's take CVE-2017-1000253 as an example.  At the time (before commit
eab09532: "binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
ELF_ET_DYN_BASE was at TASK_SIZE / 3 * 2 which is not that far away from
the stack top on 32b (legacy) memory layout (only 1GB away).  Therefore
we could end up mapping over the existing stack with some luck.

The issue has been fixed since then (a87938b2: "fs/binfmt_elf.c: fix
bug in loading of PIE binaries"), ELF_ET_DYN_BASE moved moved much
further from the stack (eab09532 and later by c715b72c: "mm:
revert x86_64 and arm64 ELF_ET_DYN_BASE base changes") and excessive
stack consumption early during execve fully stopped by da029c11
("exec: Limit arg stack to at most 75% of _STK_LIM").  So we should be
safe and any attack should be impractical.  On the other hand this is
just too subtle assumption so it can break quite easily and hard to
spot.

I believe that the MAP_FIXED usage in load_elf_binary (et. al) is still
fundamentally dangerous.  Moreover it shouldn't be even needed.  We are
at the early process stage and so there shouldn't be unrelated mappings
(except for stack and loader) existing so mmap for a given address should
succeed even without MAP_FIXED.  Something is terribly wrong if this is
not the case and we should rather fail than silently corrupt the
underlying mapping.

Address this issue by changing MAP_FIXED to the newly added
MAP_FIXED_NOREPLACE.  This will mean that mmap will fail if there is an
existing mapping clashing with the requested one without clobbering it.

[mhocko@suse.com: fix build]
[akpm@linux-foundation.org: coding-style fixes]
[avagin@openvz.org: don't use the same value for MAP_FIXED_NOREPLACE and MAP_SYNC]
  Link: http://lkml.kernel.org/r/20171218184916.24445-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20171213092550.2774-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NAndrei Vagin <avagin@openvz.org>
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NKhalid Aziz <khalid.aziz@oracle.com>
Acked-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As previously reported (https://patchwork.kernel.org/patch/8642031/)
it's possible to call shrink_dentry_list with a large number of dentries
(> 10000).  This, in turn, could trigger the softlockup detector and
possibly trigger a panic.  In addition to the unmount path being
vulnerable to this scenario, at SuSE we've observed similar situation
happening during process exit on processes that touch a lot of dentries.
Here is an excerpt from a crash dump.  The number after the colon are
the number of dentries on the list passed to shrink_dentry_list:

PID 99760: 10722
PID 107530: 215
PID 108809: 24134
PID 108877: 21331
PID 141708: 16487

So we want to kill between 15k-25k dentries without yielding.

And one possible call stack looks like:

4 [ffff8839ece41db0] _raw_spin_lock at ffffffff8152a5f8
5 [ffff8839ece41db0] evict at ffffffff811c3026
6 [ffff8839ece41dd0] __dentry_kill at ffffffff811bf258
7 [ffff8839ece41df0] shrink_dentry_list at ffffffff811bf593
8 [ffff8839ece41e18] shrink_dcache_parent at ffffffff811bf830
9 [ffff8839ece41e50] proc_flush_task at ffffffff8120dd61
10 [ffff8839ece41ec0] release_task at ffffffff81059ebd
11 [ffff8839ece41f08] do_exit at ffffffff8105b8ce
12 [ffff8839ece41f78] sys_exit at ffffffff8105bd53
13 [ffff8839ece41f80] system_call_fastpath at ffffffff81532909

While some of the callers of shrink_dentry_list do use cond_resched,
this is not sufficient to prevent softlockups.  So just move
cond_resched into shrink_dentry_list from its callers.

David said: I've found hundreds of occurrences of warnings that we emit
when need_resched stays set for a prolonged period of time with the
stack trace that is included in the change log.

Link: http://lkml.kernel.org/r/1521718946-31521-1-git-send-email-nborisov@suse.comSigned-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "ipc: Clamp *mni to the real IPCMNI limit", v3.

The sysctl parameters msgmni, shmmni and semmni have an inherent limit
of IPC_MNI (32k).  However, users may not be aware of that because they
can write a value much higher than that without getting any error or
notification.  Reading the parameters back will show the newly written
values which are not real.

Enforcing the limit by failing sysctl parameter write, however, can
break existing user applications.  To address this delemma, a new flags
field is introduced into the ctl_table.  The value CTL_FLAGS_CLAMP_RANGE
can be added to any ctl_table entries to enable a looser range clamping
without returning any error.  For example,

  .flags = CTL_FLAGS_CLAMP_RANGE,

This flags value are now used for the range checking of shmmni, msgmni
and semmni without breaking existing applications.  If any out of range
value is written to those sysctl parameters, the following warning will
be printed instead.

  Kernel parameter "shmmni" was set out of range [0, 32768], clamped to 32768.

Reading the values back will show 32768 instead of some fake values.

This patch (of 6):

Fix a typo.

Link: http://lkml.kernel.org/r/1519926220-7453-2-git-send-email-longman@redhat.comSigned-off-by: NWaiman Long <longman@redhat.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NLuis R. Rodriguez <mcgrof@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since the stack rlimit is used in multiple places during exec and it can
be changed via other threads (via setrlimit()) or processes (via
prlimit()), the assumption that the value doesn't change cannot be made.
This leads to races with mm layout selection and argument size
calculations.  This changes the exec path to use the rlimit stored in
bprm instead of in current.  Before starting the thread, the bprm stack
rlimit is stored back to current.

Link: http://lkml.kernel.org/r/1518638796-20819-4-git-send-email-keescook@chromium.org
Fixes: 64701dee ("exec: Use sane stack rlimit under secureexec")
Signed-off-by: NKees Cook <keescook@chromium.org>
Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk>
Reported-by: NAndy Lutomirski <luto@kernel.org>
Reported-by: NBrad Spengler <spender@grsecurity.net>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide a final callback into fs/exec.c before start_thread() takes
over, to handle any last-minute changes, like the coming restoration of
the stack limit.

Link: http://lkml.kernel.org/r/1518638796-20819-3-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Cc: Greg KH <greg@kroah.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "exec: Pin stack limit during exec".

Attempts to solve problems with the stack limit changing during exec
continue to be frustrated[1][2].  In addition to the specific issues
around the Stack Clash family of flaws, Andy Lutomirski pointed out[3]
other places during exec where the stack limit is used and is assumed to
be unchanging.  Given the many places it gets used and the fact that it
can be manipulated/raced via setrlimit() and prlimit(), I think the only
way to handle this is to move away from the "current" view of the stack
limit and instead attach it to the bprm, and plumb this down into the
functions that need to know the stack limits.  This series implements
the approach.

[1] 04e35f44 ("exec: avoid RLIMIT_STACK races with prlimit()")
[2] 779f4e1c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"")
[3] to security@kernel.org, "Subject: existing rlimit races?"

This patch (of 3):

Since it is possible that the stack rlimit can change externally during
exec (either via another thread calling setrlimit() or another process
calling prlimit()), provide a way to pass the rlimit down into the
per-architecture mm layout functions so that the rlimit can stay in the
bprm structure instead of sitting in the signal structure until exec is
finalized.

Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Greg KH <greg@kroah.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Brad Spengler <spender@grsecurity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All it takes to open a file and read 1 byte from it.

seq_file will be allocated along with any private allocations, and more
importantly seq file buffer which is 1 page by default.

Link: http://lkml.kernel.org/r/20180310085252.GB17121@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For fine-grained debugging and usercopy protection.

Link: http://lkml.kernel.org/r/20180310085027.GA17121@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One use of the reiserfs_warning() macro in journal_init_dev() is missing
a parameter, causing the following warning:

  REISERFS warning (device loop0): journal_init_dev: Cannot open '%s': %i journal_init_dev:

This also causes a WARN_ONCE() warning in the vsprintf code, and then a
panic if panic_on_warn is set.

  Please remove unsupported %/ in format string
  WARNING: CPU: 1 PID: 4480 at lib/vsprintf.c:2138 format_decode+0x77f/0x830 lib/vsprintf.c:2138
  Kernel panic - not syncing: panic_on_warn set ...

Just add another string argument to the macro invocation.

Addresses https://syzkaller.appspot.com/bug?id=0627d4551fdc39bf1ef5d82cd9eef587047f7718

Link: http://lkml.kernel.org/r/d678ebe1-6f54-8090-df4c-b9affad62293@infradead.orgSigned-off-by: NRandy Dunlap <rdunlap@infradead.org>
Reported-by: <syzbot+6bd77b88c1977c03f584@syzkaller.appspotmail.com>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NJeff Mahoney <jeffm@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This playing with signals to allow only fatal signals appears to predate
the introduction of wait_event_killable(), and I'm fairly sure that
wait_event_killable is what was meant to happen here.

[avagin@openvz.org: use wake_up() instead of wake_up_interruptible]
  Link: http://lkml.kernel.org/r/20180331022839.21277-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20180319191609.23880-1-willy@infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Acked-by: NIan Kent <raven@themaw.net>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In a typical for /proc "open+read+close" usecase, dentry is looked up
successfully on open only to be killed in dput() on close.  In fact
dentries which aren't /proc/*/...  and /proc/sys/* were almost NEVER
CACHED.  Simple printk in proc_lookup_de() shows that.

Now that ->delete hook intelligently picks which dentries should live in
dcache and which should not, rbtree caching is not necessary as dcache
does it job, at last!

As a side effect, struct proc_dir_entry shrinks by one pointer which can
go into inline name.

Link: http://lkml.kernel.org/r/20180314231032.GA15854@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

->count is honest reference count unlike ->in_use.

Link: http://lkml.kernel.org/r/20180313174550.GA4332@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various subsystems can create files and directories in /proc with names
directly controlled by userspace.

Which means "/", "." and ".." are no-no.

"/" split is already taken care of, do the other 2 prohibited names.

Link: http://lkml.kernel.org/r/20180310001223.GB12443@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mm_struct is not needed while printing as all the data was already
extracted.

Link: http://lkml.kernel.org/r/20180309223120.GC3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use seq_puts() and skip format string processing.

Link: http://lkml.kernel.org/r/20180309222948.GB3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As soon as register_filesystem() exits, filesystem can be mounted.  It
is better to present fully operational /proc.

Of course it doesn't matter because /proc is not modular but do it
anyway.

Drop error check, it should be handled by panicking.

Link: http://lkml.kernel.org/r/20180309222709.GA3843@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I totally forgot that _parse_integer() accepts arbitrary amount of
leading zeroes leading to the following lookups:

		OK
	# readlink /proc/1/map_files/56427ecba000-56427eddc000
	/lib/systemd/systemd

		bogus
	# readlink /proc/1/map_files/00000000000056427ecba000-56427eddc000
	/lib/systemd/systemd
	# readlink /proc/1/map_files/56427ecba000-00000000000056427eddc000
	/lib/systemd/systemd

Link: http://lkml.kernel.org/r/20180303215130.GA23480@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NCyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Pavel Emelyanov <xemul@virtuozzo.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"struct proc_dir_entry" is variable sized because of 0-length trailing
array for name, however, because of SLAB padding allocations it is
possible to make "struct proc_dir_entry" fixed sized and allocate same
amount of memory.

It buys fine-grained debugging with poisoning and usercopy protection
which is not possible with kmalloc-* caches.

Currently, on 32-bit 91+ byte allocations go into kmalloc-128 and on
64-bit 147+ byte allocations go to kmalloc-192 anyway.

Additional memory is allocated only for 38/46+ byte long names which are
rare or may not even exist in the wild.

Link: http://lkml.kernel.org/r/20180223205504.GA17139@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

proc_sys_link_fill_cache() does not need to check whether we're called
for a link - it's already done by scan().

Link: http://lkml.kernel.org/r/20180228013506.4915-2-danilokrummrich@dk-develop.deSigned-off-by: NDanilo Krummrich <danilokrummrich@dk-develop.de>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

proc_sys_link_fill_cache() does not take currently unregistering sysctl
tables into account, which might result into a page fault in
sysctl_follow_link() - add a check to fix it.

This bug has been present since v3.4.

Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de
Fixes: 0e47c99d ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: NDanilo Krummrich <danilokrummrich@dk-develop.de>
Acked-by: NKees Cook <keescook@chromium.org>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/20180217072011.GB16074@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

get_wchan() accesses stack page before permissions are checked, let's
not play this game.

Link: http://lkml.kernel.org/r/20180217071923.GA16074@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_printf() works slower than seq_puts, seq_puts, etc.

== test_proc.c
int main(int argc, char **argv)
{
	int n, i, fd;
	char buf[16384];

	n = atoi(argv[1]);
	for (i = 0; i < n; i++) {
		fd = open(argv[2], O_RDONLY);
		if (fd < 0)
			return 1;
		if (read(fd, buf, sizeof(buf)) <= 0)
			return 1;
		close(fd);
	}

	return 0;
}
==

$ time ./test_proc  1000000 /proc/1/status

== Before path ==
real	0m5.171s
user	0m0.328s
sys	0m4.783s

== After patch ==
real	0m4.761s
user	0m0.334s
sys	0m4.366s

Link: http://lkml.kernel.org/r/20180212074931.7227-4-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A delimiter is a string which is printed before a number.  A
syngle-symbol delimiters can be printed by set_putc() and this works
faster than printing by set_puts().

== test_proc.c

int main(int argc, char **argv)
{
	int n, i, fd;
	char buf[16384];

	n = atoi(argv[1]);
	for (i = 0; i < n; i++) {
		fd = open(argv[2], O_RDONLY);
		if (fd < 0)
			return 1;
		if (read(fd, buf, sizeof(buf)) <= 0)
			return 1;
		close(fd);
	}

	return 0;
}
==

$ time ./test_proc  1000000 /proc/1/stat

== Before patch ==
  real	0m3.820s
  user	0m0.337s
  sys	0m3.394s

== After patch ==
  real	0m3.110s
  user	0m0.324s
  sys	0m2.700s

Link: http://lkml.kernel.org/r/20180212074931.7227-3-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_putc() works much faster than seq_printf()

== Before patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

== After patch ==
  $ time python test_smaps.py
  real	0m3.405s
  user	0m0.401s
  sys	0m3.003s

== Before patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_aligned
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

== After patch ==
-   69.16%     5.70%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 63.46% show_smap.isra.33
      + 25.98% seq_put_decimal_ull_aligned
      + 20.90% __walk_page_range
      + 12.60% show_map_vma.isra.23
        1.56% seq_putc
      + 1.55% seq_puts

Link: http://lkml.kernel.org/r/20180212074931.7227-2-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Reviewed-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a
specified minimal field width.

It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it
works much faster.

== test_smaps.py
  num = 0
  with open("/proc/1/smaps") as f:
          for x in xrange(10000):
                  data = f.read()
                  f.seek(0, 0)
==

== Before patch ==
  $ time python test_smaps.py
  real    0m4.593s
  user    0m0.398s
  sys     0m4.158s

== After patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

$ perf -g record python test_smaps.py
== Before patch ==
-   79.01%     3.36%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 75.65% show_smap.isra.33
      + 48.85% seq_printf
      + 15.75% __walk_page_range
      + 9.70% show_map_vma.isra.23
        0.61% seq_puts

== After patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_w
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

[akpm@linux-foundation.org: fix drivers/of/unittest.c build]
Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The allocation is persistent in fact as any fool can open a file in
/proc and sit on it.

Link: http://lkml.kernel.org/r/20180214082409.GC17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"struct pde_opener" is fixed size and we can have more granular approach
to debugging.

For those who don't know, per cache SLUB poisoning and red zoning don't
work if there is at least one object allocated which is hopeless in case
of kmalloc-64 but not in case of standalone cache.  Although systemd
opens 2 files from the get go, so it is hopeless after all.

Link: http://lkml.kernel.org/r/20180214082306.GB17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The more the merrier.

Link: http://lkml.kernel.org/r/20180214081935.GA17157@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The whole point of code in fs/proc/inode.c is to make sure ->release
hook is called either at close() or at rmmod time.

All if it is unnecessary if there is no ->release hook.

Save allocation+list manipulations under spinlock in that case.

Link: http://lkml.kernel.org/r/20180214063033.GA15579@avx2Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>