- 20 2月, 2014 3 次提交
-
-
由 Theodore Ts'o 提交于
The function ext4_expand_extra_isize_ea() doesn't need the size of all of the extended attribute headers. So if we don't calculate it when it is unneeded, it we can skip some undeeded memory references, and as a bonus, we eliminate some kvetching by static code analysis tools. Addresses-Coverity-Id: #741291 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Avoid false positives by static code analysis tools such as sparse and coverity caused by the fact that we set the physical block, and then the status in the extent_status structure. It is also more efficient to set both of these values at once. Addresses-Coverity-Id: #989077 Addresses-Coverity-Id: #989078 Addresses-Coverity-Id: #1080722 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NZheng Liu <wenqing.lz@taobao.com>
-
由 Eric Whitney 提交于
Commit 37794732 breaks the return of error codes from ext4_ext_handle_uninitialized_extents() in ext4_ext_map_blocks(). A portion of the patch assigns that function's signed integer return value to an unsigned int. Consequently, negatively valued error codes are lost and can be treated as a bogus allocated block count. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 18 2月, 2014 4 次提交
-
-
由 Patrick Palka 提交于
When !defined(CONFIG_EXT4_DEBUG), mb_debug() should be defined as a no_printk() statement instead of an empty statement in order to suppress the following compiler warning: fs/ext4/mballoc.c: In function ‘ext4_mb_cleanup_pa’: fs/ext4/mballoc.c:2659:47: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] mb_debug(1, "mballoc: %u PAs left\n", count); Signed-off-by: NPatrick Palka <patrick@parcs.ath.cx> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Dan Carpenter 提交于
"err" is zero here, there is no need to check again. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Tighten up the code to make the code easier to read and maintain. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Fabian Frederick 提交于
init_inodecache is only called by __init init_ext4_fs. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 17 2月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
If the i_crtime field is not present in the inode, don't leave the field uninitialized. Fixes: ef7f3835 ("ext4: Add nanosecond timestamps") Reported-by: NVegard Nossum <vegard.nossum@oracle.com> Tested-by: NVegard Nossum <vegard.nossum@oracle.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 16 2月, 2014 2 次提交
-
-
由 Theodore Ts'o 提交于
The set_flexbg_block_bitmap() function assumed that the number of blocks in a blockgroup was sb->blocksize * 8, which is normally true, but not always! Use EXT4_BLOCKS_PER_GROUP(sb) instead, to fix block bitmap corruption after: mke2fs -t ext4 -g 3072 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reported-by: NJon Bernard <jbernard@tuxion.com> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
If a file system has a large number of inodes per block group, all of the metadata blocks in a flex_bg may be larger than what can fit in a single block group. Unfortunately, ext4_alloc_group_tables() in resize.c was never tested to see if it would handle this case correctly, and there were a large number of bugs which caused the following sequence to result in a BUG_ON: kernel bug at fs/ext4/resize.c:409! ... call trace: [<ffffffff81256768>] ext4_flex_group_add+0x1448/0x1830 [<ffffffff81257de2>] ext4_resize_fs+0x7b2/0xe80 [<ffffffff8123ac50>] ext4_ioctl+0xbf0/0xf00 [<ffffffff811c111d>] do_vfs_ioctl+0x2dd/0x4b0 [<ffffffff811b9df2>] ? final_putname+0x22/0x50 [<ffffffff811c1371>] sys_ioctl+0x81/0xa0 [<ffffffff81676aa9>] system_call_fastpath+0x16/0x1b code: c8 4c 89 df e8 41 96 f8 ff 44 89 e8 49 01 c4 44 29 6d d4 0 rip [<ffffffff81254fa1>] set_flexbg_block_bitmap+0x171/0x180 This can be reproduced with the following command sequence: mke2fs -t ext4 -i 4096 /dev/vdd 1G mount -t ext4 /dev/vdd /vdd resize2fs /dev/vdd 8G To fix this, we need to make sure the right thing happens when a block group's inode table straddles two block groups, which means the following bugs had to be fixed: 1) Not clearing the BLOCK_UNINIT flag in the second block group in ext4_alloc_group_tables --- the was proximate cause of the BUG_ON. 2) Incorrectly determining how many block groups contained contiguous free blocks in ext4_alloc_group_tables(). 3) Incorrectly setting the start of the next block range to be marked in use after a discontinuity in setup_new_flex_group_blocks(). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 13 2月, 2014 2 次提交
-
-
由 Theodore Ts'o 提交于
If an ext4 file system is created by some tool other than mke2fs (perhaps by someone who has a pathalogical fear of the GPL) that doesn't set one or the other of the EXT2_FLAGS_{UN}SIGNED_HASH flags, and that file system is then mounted read-only, don't try to modify the s_flags field. Otherwise, if dm_verity is in use, the superblock will change, causing an dm_verity failure. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Zheng Liu 提交于
In swap_inode_boot_loader() we forgot to release ->i_mutex and resume unlocked dio for inode and inode_bl if there is an error starting the journal handle. This commit fixes this issue. Reported-by: NAhmed Tamrawi <ahmedtamrawi@gmail.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Dr. Tilmann Bubeck <t.bubeck@reinform.de> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # v3.10+
-
- 12 2月, 2014 1 次提交
-
-
由 Eric Whitney 提交于
Commit a115f749 (ext4: remove wait for unwritten extent conversion from ext4_truncate) exposed a bug in ext4_ext_handle_uninitialized_extents(). It can be triggered by xfstest generic/299 when run on a test file system created without a journal. This test continuously fallocates and truncates files to which random dio/aio writes are simultaneously performed by a separate process. The test completes successfully, but if the test filesystem is mounted with the block_validity option, a warning message stating that a logical block has been mapped to an illegal physical block is posted in the kernel log. The bug occurs when an extent is being converted to the written state by ext4_end_io_dio() and ext4_ext_handle_uninitialized_extents() discovers a mapping for an existing uninitialized extent. Although it sets EXT4_MAP_MAPPED in map->m_flags, it fails to set map->m_pblk to the discovered physical block number. Because map->m_pblk is not otherwise initialized or set by this function or its callers, its uninitialized value is returned to ext4_map_blocks(), where it is stored as a bogus mapping in the extent status tree. Since map->m_pblk can accidentally contain illegal values that are larger than the physical size of the file system, calls to check_block_validity() in ext4_map_blocks() that are enabled if the block_validity mount option is used can fail, resulting in the logged warning message. Signed-off-by: NEric Whitney <enwlinux@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org # 3.11+
-
- 10 2月, 2014 1 次提交
-
-
由 Al Viro 提交于
It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support) when sync_page_range() had been introduced; generic_file_write{,v}() correctly synced pos_after_write - written .. pos_after_write - 1 but generic_file_aio_write() synced pos_before_write .. pos_before_write + written - 1 instead. Which is not the same thing with O_APPEND, obviously. A couple of years later correct variant had been killed off when everything switched to use of generic_file_aio_write(). All users of generic_file_aio_write() are affected, and the same bug has been copied into other instances of ->aio_write(). The fix is trivial; the only subtle point is that generic_write_sync() ought to be inlined to avoid calculations useless for the majority of calls. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 1月, 2014 3 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Rename the current posix_acl_created to __posix_acl_create and add a fully featured helper to set up the ACLs on file creation that uses get_acl(). Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Rename the current posix_acl_chmod to __posix_acl_chmod and add a fully featured ACL chmod helper that uses the ->set_acl inode operation. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 24 1月, 2014 1 次提交
-
-
由 Cody P Schafer 提交于
Use rbtree_postorder_for_each_entry_safe() to destroy the rbtree instead of opencoding an alternate postorder iteration that modifies the tree Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Michel Lespinasse <walken@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 1月, 2014 1 次提交
-
-
由 jon ernst 提交于
Signed-off-by: NJon Ernst <jonernst07@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NZheng Liu <wenqing.lz@taobao.com>
-
- 08 1月, 2014 2 次提交
-
-
由 Theodore Ts'o 提交于
This is harmless, since ext4_walk_page_buffers only passes the handle onto the callback function, and in this call site the function in question, bput_one(), doesn't actually use the handle. But there's no point passing in an invalid handle, and it creates a Coverity warning, so let's just clean it up. Addresses-Coverity-Id: #1091168 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
A missing cast means that when we are truncating a file which is less than 60 bytes, we don't clear the correct area of memory, and in fact we can end up truncating the next inode in the inode table, or worse yet, some other kernel data structure. Addresses-Coverity-Id: #751987 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 07 1月, 2014 7 次提交
-
-
由 Yongqiang Yang 提交于
Can be reproduced by xfstests 62 with bigalloc and 128bit size inode. Signed-off-by: NYongqiang Yang <yangyongqiang01@baidu.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
-
由 Yongqiang Yang 提交于
Signed-off-by: NYongqiang Yang <yangyongqiang01@baidu.com> Reviewed-by: NCarlos Maiolino <cmaiolino@redhat.com>
-
由 David Howells 提交于
Use the new %pd printk() specifier in Ext4 to replace passing of dentry name or dentry name and name length * 2 with just passing the dentry. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> cc: Andreas Dilger <adilger.kernel@dilger.ca> cc: linux-ext4@vger.kernel.org
-
由 Jan Kara 提交于
The function has a bit non-standard (for ext4) error recovery in that it used a mix of 'out' labels and testing for 'handle' being NULL. There isn't a good reason for that in the function so clean it up a bit. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Jan Kara 提交于
Similarly as other ->write_begin functions in ext4, also ext4_da_write_inline_data_begin() should retry allocation if the conversion failed because of ENOSPC. This avoids returning ENOSPC prematurely because of uncommitted block deletions. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Zheng Liu 提交于
After applied this commit (d23142c6), ext4 has supported punch hole for a file system with bigalloc feature. But we forgot to enable it. This commit fixes it. Cc: Lukas Czerner <lczerner@redhat.com> Signed-off-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Eric Whitney 提交于
Commit f5a44db5 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by: NEric Whitney <enwlinux@gmail.com>
-
- 20 12月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
The missing casts can cause the high 64-bits of the physical blocks to be lost. Set up new macros which allows us to make sure the right thing happen, even if at some point we end up supporting larger logical block numbers. Thanks to the Emese Revfy and the PaX security team for reporting this issue. Reported-by: NPaX Team <pageexec@freemail.hu> Reported-by: Emese Revfy <re.emese@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 18 12月, 2013 1 次提交
-
-
由 Jan Kara 提交于
Akira-san has been reporting rare deadlocks of his machine when running xfstests test 269 on ext4 filesystem. The problem turned out to be in ext4_da_reserve_metadata() and ext4_da_reserve_space() which called ext4_should_retry_alloc() while holding i_data_sem. Since ext4_should_retry_alloc() can force a transaction commit, this is a lock ordering violation and leads to deadlocks. Fix the problem by just removing the retry loops. These functions should just report ENOSPC to the caller (e.g. ext4_da_write_begin()) and that function must take care of retrying after dropping all necessary locks. Reported-and-tested-by: NAkira Fujita <a-fujita@rs.jp.nec.com> Reviewed-by: NZheng Liu <wenqing.lz@taobao.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 09 12月, 2013 2 次提交
-
-
由 Jan Kara 提交于
When the filesystem doesn't support extents (like in ext2/3 compatibility modes), there is no need to reserve any clusters. Space estimates for writing are exact, hole punching doesn't need new metadata, and there are no unwritten extents to convert. This fixes a problem when filesystem still having some free space when accessed with a native ext2/3 driver suddently reports ENOSPC when accessed with ext4 driver. Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Tested-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NLukas Czerner <lczerner@redhat.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Al Viro 提交于
That thing should be del_timer_sync(); consider what happens if ext4_put_super() call of del_timer() happens to come just as it's getting run on another CPU. Since that timer reschedules itself to run next day, you are pretty much guaranteed that you'll end up with kfree'd scheduled timer, with usual fun consequences. AFAICS, that's -stable fodder all way back to 2010... [the second del_timer_sync() is almost certainly not needed, but it doesn't hurt either] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 06 12月, 2013 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently notify_change directly updates i_version for size updates, which not only is counter to how all other fields are updated through struct iattr, but also breaks XFS, which need inode updates to happen under its own lock, and synchronized to the structure that gets written to the log. Remove the update in the common code, and it to btrfs and ext4, XFS already does a proper updaste internally and currently gets a double update with the existing code. IMHO this is 3.13 and -stable material and should go in through the XFS tree. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAndreas Dilger <adilger@dilger.ca> Acked-by: NJan Kara <jack@suse.cz> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NChris Mason <clm@fb.com> Signed-off-by: NBen Myers <bpm@sgi.com>
-
- 04 12月, 2013 2 次提交
-
-
由 Eryu Guan 提交于
A corrupted ext4 may have out of order leaf extents, i.e. extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT ^^^^ overlap with previous extent Reading such extent could hit BUG_ON() in ext4_es_cache_extent(). BUG_ON(end < lblk); The problem is that __read_extent_tree_block() tries to cache holes as well but assumes 'lblk' is greater than 'prev' and passes underflowed length to ext4_es_cache_extent(). Fix it by checking for overlapping extents in ext4_valid_extent_entries(). I hit this when fuzz testing ext4, and am able to reproduce it by modifying the on-disk extent by hand. Also add the check for (ee_block + len - 1) in ext4_valid_extent() to make sure the value is not overflow. Ran xfstests on patched ext4 and no regression. Cc: Lukáš Czerner <lczerner@redhat.com> Signed-off-by: NEryu Guan <guaneryu@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Junho Ryu 提交于
ext4_mb_put_pa should hold pa->pa_lock before accessing pa->pa_count. While ext4_mb_use_preallocated checks pa->pa_deleted first and then increments pa->count later, ext4_mb_put_pa decrements pa->pa_count before holding pa->pa_lock and then sets pa->pa_deleted. * Free sequence ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count ext4_mb_put_pa (2): lock pa->pa_lock ext4_mb_put_pa (3): check pa->pa_deleted ext4_mb_put_pa (4): set pa->pa_deleted=1 ext4_mb_put_pa (5): unlock pa->pa_lock ext4_mb_put_pa (6): remove pa from a list ext4_mb_pa_callback: free pa * Use sequence ext4_mb_use_preallocated (1): iterate over preallocation ext4_mb_use_preallocated (2): lock pa->pa_lock ext4_mb_use_preallocated (3): check pa->pa_deleted ext4_mb_use_preallocated (4): increase pa->pa_count ext4_mb_use_preallocated (5): unlock pa->pa_lock ext4_mb_release_context: access pa * Use-after-free sequence [initial status] <pa->pa_deleted = 0, pa_count = 1> ext4_mb_use_preallocated (1): iterate over preallocation ext4_mb_use_preallocated (2): lock pa->pa_lock ext4_mb_use_preallocated (3): check pa->pa_deleted ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count [pa_count decremented] <pa->pa_deleted = 0, pa_count = 0> ext4_mb_use_preallocated (4): increase pa->pa_count [pa_count incremented] <pa->pa_deleted = 0, pa_count = 1> ext4_mb_use_preallocated (5): unlock pa->pa_lock ext4_mb_put_pa (2): lock pa->pa_lock ext4_mb_put_pa (3): check pa->pa_deleted ext4_mb_put_pa (4): set pa->pa_deleted=1 [race condition!] <pa->pa_deleted = 1, pa_count = 1> ext4_mb_put_pa (5): unlock pa->pa_lock ext4_mb_put_pa (6): remove pa from a list ext4_mb_pa_callback: free pa ext4_mb_release_context: access pa AddressSanitizer has detected use-after-free in ext4_mb_new_blocks Bug report: http://goo.gl/rG1On3Signed-off-by: NJunho Ryu <jayr@google.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
- 02 12月, 2013 1 次提交
-
-
由 Theodore Ts'o 提交于
While it's true that errors can only happen if there is a bug in jbd2_journal_dirty_metadata(), if a bug does happen, we need to halt the kernel or remount the file system read-only in order to avoid further data loss. The ext4_journal_abort_handle() function doesn't do any of this, and while it's likely that this call (since it doesn't adjust refcounts) will likely result in the file system eventually deadlocking since the current transaction will never be able to close, it's much cleaner to call let ext4's error handling system deal with this situation. There's a separate bug here which is that if certain jbd2 errors errors occur and file system is mounted errors=continue, the file system will probably eventually end grind to a halt as described above. But things have been this way in a long time, and usually when we have these sorts of errors it's pretty much a disaster --- and that's why the jbd2 layer aggressively retries memory allocations, which is the most likely cause of these jbd2 errors. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Reviewed-by: NJan Kara <jack@suse.cz> Cc: stable@vger.kernel.org
-
- 24 11月, 2013 2 次提交
-
-
由 Kent Overstreet 提交于
Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
-
由 Kent Overstreet 提交于
With immutable biovecs we don't want code accessing bi_io_vec directly - the uses this patch changes weren't incorrect since they all own the bio, but it makes the code harder to audit for no good reason - also, this will help with multipage bvecs later. Signed-off-by: NKent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 11月, 2013 2 次提交
-
-
由 Andreas Dilger 提交于
It isn't very easy to find the declarations for the functions created by EXT4_INODE_BIT_FNS() because the names are generated by macros: ext4_test_inode_flag, ext4_set_inode_flag, ext4_clear_inode_flag ext4_test_inode_state, ext4_set_inode_state, ext4_clear_inode_state Add explicit declarations for these functions so that grep and tags can find them. Signed-off-by: NAndreas Dilger <adilger@dilger.ca> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Andreas Dilger 提交于
Return a non-zero st_blocks to userspace for statfs() and friends. Some versions of tar will assume that files with st_blocks == 0 do not contain any data and will skip reading them entirely. Signed-off-by: NAndreas Dilger <andreas.dilger@intel.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-