Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 08 5月, 2019 28 次提交
    • S
      batman-adv: Reduce tt_global hash refcnt only for removed entry · 7afe374c
      由 Sven Eckelmann 提交于 
      [ Upstream commit f131a56880d10932931e74773fb8702894a94a75 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_global_free is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 7683fdc1 ("batman-adv: protect the local and the global trans-tables with rcu")
Reported-by: NMartin Weinelt <martin@linuxlounge.net>
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Acked-by: NAntonio Quartulli <a@unstable.cc>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      7afe374c
    • S
      batman-adv: Reduce tt_local hash refcnt only for removed entry · 6957021d
      由 Sven Eckelmann 提交于 
      [ Upstream commit 3d65b9accab4a7ed5038f6df403fbd5e298398c7 ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_tt_local_remove is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: ef72706a ("batman-adv: protect tt_local_entry from concurrent delete events")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      6957021d
    • S
      batman-adv: Reduce claim hash refcnt only for removed entry · be807f9b
      由 Sven Eckelmann 提交于 
      [ Upstream commit 4ba104f468bbfc27362c393815d03aa18fb7a20f ]

The batadv_hash_remove is a function which searches the hashtable for an
entry using a needle, a hashtable bucket selection function and a compare
function. It will lock the bucket list and delete an entry when the compare
function matches it with the needle. It returns the pointer to the
hlist_node which matches or NULL when no entry matches the needle.

The batadv_bla_del_claim is not itself protected in anyway to avoid that
any other function is modifying the hashtable between the search for the
entry and the call to batadv_hash_remove. It can therefore happen that the
entry either doesn't exist anymore or an entry was deleted which is not the
same object as the needle. In such an situation, the reference counter (for
the reference stored in the hashtable) must not be reduced for the needle.
Instead the reference counter of the actually removed entry has to be
reduced.

Otherwise the reference counter will underflow and the object might be
freed before all its references were dropped. The kref helpers reported
this problem as:

  refcount_t: underflow; use-after-free.

Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code")
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      be807f9b
    • G
      rtc: sh: Fix invalid alarm warning for non-enabled alarm · 8a734e25
      由 Geert Uytterhoeven 提交于 
      [ Upstream commit 15d82d22498784966df8e4696174a16b02cc1052 ]

When no alarm has been programmed on RSK-RZA1, an error message is
printed during boot:

    rtc rtc0: invalid alarm value: 2019-03-14T255:255:255

sh_rtc_read_alarm_value() returns 0xff when querying a hardware alarm
field that is not enabled.  __rtc_read_alarm() validates the received
alarm values, and fills in missing fields when needed.
While 0xff is handled fine for the year, month, and day fields, and
corrected as considered being out-of-range, this is not the case for the
hour, minute, and second fields, where -1 is expected for missing
fields.

Fix this by returning -1 instead, as this value is handled fine for all
fields.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      8a734e25
    • S
      rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured · 5b5c653d
      由 Stephen Boyd 提交于 
      [ Upstream commit d6752e185c3168771787a02dc6a55f32260943cc ]

If we encounter a failure during suspend where this RTC was programmed
to wakeup the system from suspend, but that wakeup couldn't be
configured because the system didn't support wakeup interrupts, we'll
run into the following warning:

	Unbalanced IRQ 166 wake disable
	WARNING: CPU: 7 PID: 3071 at kernel/irq/manage.c:669 irq_set_irq_wake+0x108/0x278

This happens because the suspend process isn't aborted when the RTC
fails to configure the wakeup IRQ. Instead, we continue suspending the
system and then another suspend callback fails the suspend process and
"unwinds" the previously suspended drivers by calling their resume
callbacks. When we get back to resuming this RTC driver, we'll call
disable_irq_wake() on an IRQ that hasn't been configured for wake.

Let's just fail suspend/resume here if we can't configure the system to
wake and the user has chosen to wakeup with this device. This fixes this
warning and makes the code more robust in case there are systems out
there that can't wakeup from suspend on this line but the user has
chosen to do so.

Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Evan Green <evgreen@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Signed-off-by: NStephen Boyd <swboyd@chromium.org>
Acked-By: NBenson Leung <bleung@chromium.org>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      5b5c653d
    • H
      HID: debug: fix race condition with between rdesc_show() and device removal · 2f4052ff
      由 He, Bo 提交于 
      [ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ]

There is a race condition that could happen if hid_debug_rdesc_show()
is running while hdev is in the process of going away (device removal,
system suspend, etc) which could result in NULL pointer dereference:

	 BUG: unable to handle kernel paging request at 0000000783316040
	 CPU: 1 PID: 1512 Comm: getevent Tainted: G     U     O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1
	 RIP: 0010:hid_dump_device+0x9b/0x160
	 Call Trace:
	  hid_debug_rdesc_show+0x72/0x1d0
	  seq_read+0xe0/0x410
	  full_proxy_read+0x5f/0x90
	  __vfs_read+0x3a/0x170
	  vfs_read+0xa0/0x150
	  ksys_read+0x58/0xc0
	  __x64_sys_read+0x1a/0x20
	  do_syscall_64+0x55/0x110
	  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Grab driver_input_lock to make sure the input device exists throughout the
whole process of dumping the rdesc.

[jkosina@suse.cz: update changelog a bit]
Signed-off-by: Nhe, bo <bo.he@intel.com>
Signed-off-by: N"Zhang, Jun" <jun.zhang@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      2f4052ff
    • K
      HID: logitech: check the return value of create_singlethread_workqueue · 61effc64
      由 Kangjie Lu 提交于 
      [ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ]

create_singlethread_workqueue may fail and return NULL. The fix checks if it is
NULL to avoid NULL pointer dereference.  Also, the fix moves the call of
create_singlethread_workqueue earlier to avoid resource-release issues.
Signed-off-by: NKangjie Lu <kjlu@umn.edu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      61effc64
    • L
      arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay · dbfef4bd
      由 Leonidas P. Papadakos 提交于 
      [ Upstream commit 924726888f660b2a86382a5dd051ec9ca1b18190 ]

The rk3328-roc-cc board exhibits tx stability issues with large packets,
as does the rock64 board, which was fixed with this patch
https://patchwork.kernel.org/patch/10178969/

A similar patch was merged for the rk3328-roc-cc here
https://patchwork.kernel.org/patch/10804863/
but it doesn't include the tx/rx_delay tweaks, and I find that they
help with an issue where large transfers would bring the ethernet
link down, causing a link reset regularly.
Signed-off-by: NLeonidas P. Papadakos <papadakospan@gmail.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      dbfef4bd
    • W
      efi: Fix debugobjects warning on 'efi_rts_work' · 3e6b472f
      由 Waiman Long 提交于 
      [ Upstream commit ef1491e791308317bb9851a0ad380c4a68b58d54 ]

The following commit:

  9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")

converted 'efi_rts_work' from an auto variable to a global variable.
However, when submitting the work, INIT_WORK_ONSTACK() was still used,
causing the following complaint from debugobjects:

  ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated.

Change the macro to just INIT_WORK() to eliminate the warning.
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NSai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler")
Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      3e6b472f
    • Y
      nvme-loop: init nvmet_ctrl fatal_err_work when allocate · 30673786
      由 Yufen Yu 提交于 
      [ Upstream commit d11de63f2b519f0a162b834013b6d3a46dbf3886 ]

After commit 4d43d395fe (workqueue: Try to catch flush_work() without
INIT_WORK()), it can cause warning when delete nvme-loop device, trace
like:

[   76.601272] Call Trace:
[   76.601646]  ? del_timer+0x72/0xa0
[   76.602156]  __cancel_work_timer+0x1ae/0x270
[   76.602791]  cancel_work_sync+0x14/0x20
[   76.603407]  nvmet_ctrl_free+0x1b7/0x2f0 [nvmet]
[   76.604091]  ? free_percpu+0x168/0x300
[   76.604652]  nvmet_sq_destroy+0x106/0x240 [nvmet]
[   76.605346]  nvme_loop_destroy_admin_queue+0x30/0x60 [nvme_loop]
[   76.606220]  nvme_loop_shutdown_ctrl+0xc3/0xf0 [nvme_loop]
[   76.607026]  nvme_loop_delete_ctrl_host+0x19/0x30 [nvme_loop]
[   76.607871]  nvme_do_delete_ctrl+0x75/0xb0
[   76.608477]  nvme_sysfs_delete+0x7d/0xc0
[   76.609057]  dev_attr_store+0x24/0x40
[   76.609603]  sysfs_kf_write+0x4c/0x60
[   76.610144]  kernfs_fop_write+0x19a/0x260
[   76.610742]  __vfs_write+0x1c/0x60
[   76.611246]  vfs_write+0xfa/0x280
[   76.611739]  ksys_write+0x6e/0x120
[   76.612238]  __x64_sys_write+0x1e/0x30
[   76.612787]  do_syscall_64+0xbf/0x3a0
[   76.613329]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

We fix it by moving fatal_err_work init to nvmet_alloc_ctrl(), which may
more reasonable.
Signed-off-by: NYufen Yu <yuyufen@huawei.com>
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Reviewed-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      30673786
    • A
      USB: core: Fix bug caused by duplicate interface PM usage counter · 83c6688d
      由 Alan Stern 提交于 
      commit c2b71462d294cf517a0bc6e4fd6424d7cee5596f upstream.

The syzkaller fuzzer reported a bug in the USB hub driver which turned
out to be caused by a negative runtime-PM usage counter.  This allowed
a hub to be runtime suspended at a time when the driver did not expect
it.  The symptom is a WARNING issued because the hub's status URB is
submitted while it is already active:

	URB 0000000031fb463e submitted while active
	WARNING: CPU: 0 PID: 2917 at drivers/usb/core/urb.c:363

The negative runtime-PM usage count was caused by an unfortunate
design decision made when runtime PM was first implemented for USB.
At that time, USB class drivers were allowed to unbind from their
interfaces without balancing the usage counter (i.e., leaving it with
a positive count).  The core code would take care of setting the
counter back to 0 before allowing another driver to bind to the
interface.

Later on when runtime PM was implemented for the entire kernel, the
opposite decision was made: Drivers were required to balance their
runtime-PM get and put calls.  In order to maintain backward
compatibility, however, the USB subsystem adapted to the new
implementation by keeping an independent usage counter for each
interface and using it to automatically adjust the normal usage
counter back to 0 whenever a driver was unbound.

This approach involves duplicating information, but what is worse, it
doesn't work properly in cases where a USB class driver delays
decrementing the usage counter until after the driver's disconnect()
routine has returned and the counter has been adjusted back to 0.
Doing so would cause the usage counter to become negative.  There's
even a warning about this in the USB power management documentation!

As it happens, this is exactly what the hub driver does.  The
kick_hub_wq() routine increments the runtime-PM usage counter, and the
corresponding decrement is carried out by hub_event() in the context
of the hub_wq work-queue thread.  This work routine may sometimes run
after the driver has been unbound from its interface, and when it does
it causes the usage counter to go negative.

It is not possible for hub_disconnect() to wait for a pending
hub_event() call to finish, because hub_disconnect() is called with
the device lock held and hub_event() acquires that lock.  The only
feasible fix is to reverse the original design decision: remove the
duplicate interface-specific usage counter and require USB drivers to
balance their runtime PM gets and puts.  As far as I know, all
existing drivers currently do this.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+7634edaea4d0b341c625@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      83c6688d
    • A
      USB: core: Fix unterminated string returned by usb_string() · 7b73c2a0
      由 Alan Stern 提交于 
      commit c01c348ecdc66085e44912c97368809612231520 upstream.

Some drivers (such as the vub300 MMC driver) expect usb_string() to
return a properly NUL-terminated string, even when an error occurs.
(In fact, vub300's probe routine doesn't bother to check the return
code from usb_string().)  When the driver goes on to use an
unterminated string, it leads to kernel errors such as
stack-out-of-bounds, as found by the syzkaller USB fuzzer.

An out-of-range string index argument is not at all unlikely, given
that some devices don't provide string descriptors and therefore list
0 as the value for their string indexes.  This patch makes
usb_string() return a properly terminated empty string along with the
-EINVAL error code when an out-of-range index is encountered.

And since a USB string index is a single-byte value, indexes >= 256
are just as invalid as values of 0 or below.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: syzbot+b75b85111c10b8d680f1@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7b73c2a0
    • M
      usb: usbip: fix isoc packet num validation in get_pipe · 7df0d2c7
      由 Malte Leip 提交于 
      commit c409ca3be3c6ff3a1eeb303b191184e80d412862 upstream.

Change the validation of number_of_packets in get_pipe to compare the
number of packets to a fixed maximum number of packets allowed, set to
be 1024. This number was chosen due to it being used by other drivers as
well, for example drivers/usb/host/uhci-q.c

Background/reason:
The get_pipe function in stub_rx.c validates the number of packets in
isochronous mode and aborts with an error if that number is too large,
in order to prevent malicious input from possibly triggering large
memory allocations. This was previously done by checking whether
pdu->u.cmd_submit.number_of_packets is bigger than the number of packets
that would be needed for pdu->u.cmd_submit.transfer_buffer_length bytes
if all except possibly the last packet had maximum length, given by
usb_endpoint_maxp(epd) *  usb_endpoint_maxp_mult(epd). This leads to an
error if URBs with packets shorter than the maximum possible length are
submitted, which is allowed according to
Documentation/driver-api/usb/URB.rst and occurs for example with the
snd-usb-audio driver.

Fixes: c6688ef9 ("usbip: fix stub_rx: harden CMD_SUBMIT path to handle malicious input")
Signed-off-by: NMalte Leip <malte@leip.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: NShuah Khan <skhan@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7df0d2c7
    • A
      USB: dummy-hcd: Fix failure to give back unlinked URBs · 512ce150
      由 Alan Stern 提交于 
      commit fc834e607ae3d18e1a20bca3f9a2d7f52ea7a2be upstream.

The syzkaller USB fuzzer identified a failure mode in which dummy-hcd
would never give back an unlinked URB.  This causes usb_kill_urb() to
hang, leading to WARNINGs and unkillable threads.

In dummy-hcd, all URBs are given back by the dummy_timer() routine as
it scans through the list of pending URBS.  Failure to give back URBs
can be caused by failure to start or early exit from the scanning
loop.  The code currently has two such pathways: One is triggered when
an unsupported bus transfer speed is encountered, and the other by
exhausting the simulated bandwidth for USB transfers during a frame.

This patch removes those two paths, thereby allowing all unlinked URBs
to be given back in a timely manner.  It adds a check for the bus
speed when the gadget first starts running, so that dummy_timer() will
never thereafter encounter an unsupported speed.  And it prevents the
loop from exiting as soon as the total bandwidth has been used up (the
scanning loop continues, giving back unlinked URBs as they are found,
but not transferring any more data).

Thanks to Andrey Konovalov for manually running the syzkaller fuzzer
to help track down the source of the bug.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+d919b0f29d7b5a4994b9@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      512ce150
    • A
      USB: w1 ds2490: Fix bug caused by improper use of altsetting array · 50895488
      由 Alan Stern 提交于 
      commit c114944d7d67f24e71562fcfc18d550ab787e4d4 upstream.

The syzkaller USB fuzzer spotted a slab-out-of-bounds bug in the
ds2490 driver.  This bug is caused by improper use of the altsetting
array in the usb_interface structure (the array's entries are not
always stored in numerical order), combined with a naive assumption
that all interfaces probed by the driver will have the expected number
of altsettings.

The bug can be fixed by replacing references to the possibly
non-existent intf->altsetting[alt] entry with the guaranteed-to-exist
intf->cur_altsetting entry.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+d65f673b847a1a96cdba@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      50895488
    • A
      USB: yurex: Fix protection fault after device removal · 9f632afe
      由 Alan Stern 提交于 
      commit ef61eb43ada6c1d6b94668f0f514e4c268093ff3 upstream.

The syzkaller USB fuzzer found a general-protection-fault bug in the
yurex driver.  The fault occurs when a device has been unplugged; the
driver's interrupt-URB handler logs an error message referring to the
device by name, after the device has been unregistered and its name
deallocated.

This problem is caused by the fact that the interrupt URB isn't
cancelled until the driver's private data structure is released, which
can happen long after the device is gone.  The cure is to make sure
that the interrupt URB is killed before yurex_disconnect() returns;
this is exactly the sort of thing that usb_poison_urb() was meant for.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: syzbot+2eb9121678bdb36e6d57@syzkaller.appspotmail.com
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      9f632afe
    • T
      ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR · f02c6460
      由 Takashi Iwai 提交于 
      commit 3887c26c0e24d50a4d0ce20cf4726737cee1a2fd upstream.

Some ASUS models like Q325UAR with ALC295 codec requires the same
fixup that has been applied to ALC294 codec.  Just copy the entry with
the pin matching to cover ALC295 too.

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784485
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f02c6460
    • K
      ALSA: hda/realtek - Fixed Dell AIO speaker noise · 347411f9
      由 Kailang Yang 提交于 
      commit 0700d3d117a7f110ddddbd83873e13652f69c54b upstream.

Fixed Dell AIO speaker noise.
spec->gen.auto_mute_via_amp = 1, this option was solved speaker white
noise at boot.
codec->power_save_node = 0, this option was solved speaker noise at
resume back.

Fixes: 92266651 ("ALSA: hda/realtek - Fix Dell AIO LineOut issue")
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      347411f9
    • K
      ALSA: hda/realtek - Add new Dell platform for headset mode · f937634b
      由 Kailang Yang 提交于 
      commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.

Add two Dell platform for headset mode.

[ Note: this is a further correction / addition of the previous
  pin-based quirks for Dell machines; another entry for ALC236 with
  the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]

Fixes: b26e36b7ef36 ("ALSA: hda/realtek - add two more pin configuration sets to quirk table")
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f937634b
    • J
      i2c: Prevent runtime suspend of adapter when Host Notify is required · b19c2306
      由 Jarkko Nikula 提交于 
      commit 72bfcee11cf89509795c56b0e40a3785ab00bbdd upstream.

Multiple users have reported their Synaptics touchpad has stopped
working between v4.20.1 and v4.20.2 when using SMBus interface.

The culprit for this appeared to be commit c5eb1190074c ("PCI / PM: Allow
runtime PM without callback functions") that fixed the runtime PM for
i2c-i801 SMBus adapter. Those Synaptics touchpad are using i2c-i801
for SMBus communication and testing showed they are able to get back
working by preventing the runtime suspend of adapter.

Normally when i2c-i801 SMBus adapter transmits with the client it resumes
before operation and autosuspends after.

However, if client requires SMBus Host Notify protocol, what those
Synaptics touchpads do, then the host adapter must not go to runtime
suspend since then it cannot process incoming SMBus Host Notify commands
the client may send.

Fix this by keeping I2C/SMBus adapter active in case client requires
Host Notify.
Reported-by: NKeijo Vaara <ferdasyn@rocketmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203297
Fixes: c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NKeijo Vaara <ferdasyn@rocketmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b19c2306
    • J
      i2c: Allow recovery of the initial IRQ by an I2C client device. · 04e07919
      由 Jim Broadus 提交于 
      commit 93b6604c5a669d84e45fe5129294875bf82eb1ff upstream.

A previous change allowed I2C client devices to discover new IRQs upon
reprobe by clearing the IRQ in i2c_device_remove. However, if an IRQ was
assigned in i2c_new_device, that information is lost.

For example, the touchscreen and trackpad devices on a Dell Inspiron laptop
are I2C devices whose IRQs are defined by ACPI extended IRQ types. The
client device structures are initialized during an ACPI walk. After
removing the i2c_hid device, modprobe fails.

This change caches the initial IRQ value in i2c_new_device and then resets
the client device IRQ to the initial value in i2c_device_remove.

Fixes: 6f108dd70d30 ("i2c: Clear client->irq in i2c_device_remove")
Signed-off-by: NJim Broadus <jbroadus@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
[wsa: this is an easy to backport fix for the regression. We will
refactor the code to handle irq assignments better in general.]
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      04e07919
    • C
      i2c: Clear client->irq in i2c_device_remove · 1e031ab3
      由 Charles Keepax 提交于 
      commit 6f108dd70d3010c391c1e9f56f3f20d1f9e75450 upstream.

The IRQ will be mapped in i2c_device_probe only if client->irq is zero and
i2c_device_remove does not clear this. When rebinding an I2C device,
whos IRQ provider has also been rebound this means that an IRQ mapping
will never be created, causing the I2C device to fail to acquire its
IRQ. Fix this issue by clearing client->irq in i2c_device_remove,
forcing i2c_device_probe to lookup the mapping again.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1e031ab3
    • C
      i2c: Remove unnecessary call to irq_find_mapping · 63eab25e
      由 Charles Keepax 提交于 
      commit b9bb3fdf4e870fb655064f5c3c81c1fee7fd89ce upstream.

irq_create_mapping calls irq_find_mapping internally and will use the
found mapping if one exists, so there is no need to manually call this
from i2c_smbus_host_notify_to_irq.
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      63eab25e
    • A
      i2c: imx: correct the method of getting private data in notifier_call · e89ba70e
      由 Anson Huang 提交于 
      commit d386bb9042f4629bf62cdc5952ea8aab225f24a7 upstream.

The way of getting private imx_i2c_struct in i2c_imx_clk_notifier_call()
is incorrect, should use clk_change_nb element to get correct address
and avoid below kernel dump during POST_RATE_CHANGE notify by clk
framework:

Unable to handle kernel paging request at virtual address 03ef1488
pgd = (ptrval)
[03ef1488] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Workqueue: events reduce_bus_freq_handler
PC is at i2c_imx_set_clk+0x10/0xb8
LR is at i2c_imx_clk_notifier_call+0x20/0x28
pc : [<806a893c>]    lr : [<806a8a04>]    psr: a0080013
sp : bf399dd8  ip : bf3432ac  fp : bf7c1dc0
r10: 00000002  r9 : 00000000  r8 : 00000000
r7 : 03ef1480  r6 : bf399e50  r5 : ffffffff  r4 : 00000000
r3 : bf025300  r2 : bf399e50  r1 : 00b71b00  r0 : bf399be8
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 4e03004a  DAC: 00000051
Process kworker/2:1 (pid: 38, stack limit = 0x(ptrval))
Stack: (0xbf399dd8 to 0xbf39a000)
9dc0:                                                       806a89e4 00000000
9de0: ffffffff bf399e50 00000002 806a8a04 806a89e4 80142900 ffffffff 00000000
9e00: bf34ef18 bf34ef04 00000000 ffffffff bf399e50 80142d84 00000000 bf399e6c
9e20: bf34ef00 80f214c4 bf025300 00000002 80f08d08 bf017480 00000000 80142df0
9e40: 00000000 80166ed8 80c27638 8045de58 bf352340 03ef1480 00b71b00 0f82e242
9e60: bf025300 00000002 03ef1480 80f60e5c 00000001 8045edf0 00000002 8045eb08
9e80: bf025300 00000002 03ef1480 8045ee10 03ef1480 8045eb08 bf01be40 00000002
9ea0: 03ef1480 8045ee10 07de2900 8045eb08 bf01b780 00000002 07de2900 8045ee10
9ec0: 80c27898 bf399ee4 bf020a80 00000002 1f78a400 8045ee10 80f60e5c 80460514
9ee0: 80f60e5c bf01b600 bf01b480 80460460 0f82e242 bf383a80 bf383a00 80f60e5c
9f00: 00000000 bf7c1dc0 80f60e70 80460564 80f60df0 80f60d24 80f60df0 8011e72c
9f20: 00000000 80f60df0 80f60e6c bf7c4f00 00000000 8011e7ac bf274000 8013bd84
9f40: bf7c1dd8 80f03d00 bf274000 bf7c1dc0 bf274014 bf7c1dd8 80f03d00 bf398000
9f60: 00000008 8013bfb4 00000000 bf25d100 bf25d0c0 00000000 bf274000 8013bf88
9f80: bf25d11c bf0cfebc 00000000 8014140c bf25d0c0 801412ec 00000000 00000000
9fa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000
9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<806a893c>] (i2c_imx_set_clk) from [<806a8a04>] (i2c_imx_clk_notifier_call+0x20/0x28)
[<806a8a04>] (i2c_imx_clk_notifier_call) from [<80142900>] (notifier_call_chain+0x44/0x84)
[<80142900>] (notifier_call_chain) from [<80142d84>] (__srcu_notifier_call_chain+0x44/0x98)
[<80142d84>] (__srcu_notifier_call_chain) from [<80142df0>] (srcu_notifier_call_chain+0x18/0x20)
[<80142df0>] (srcu_notifier_call_chain) from [<8045de58>] (__clk_notify+0x78/0xa4)
[<8045de58>] (__clk_notify) from [<8045edf0>] (__clk_recalc_rates+0x60/0xb4)
[<8045edf0>] (__clk_recalc_rates) from [<8045ee10>] (__clk_recalc_rates+0x80/0xb4)
Code: e92d40f8 e5903298 e59072a0 e1530001 (e5975008)
---[ end trace fc7f5514b97b6cbb ]---

Fixes: 90ad2cbe ("i2c: imx: use clk notifier for rate changes")
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e89ba70e
    • A
      i2c: synquacer: fix enumeration of slave devices · d1493c5c
      由 Ard Biesheuvel 提交于 
      commit 95e0cf3caeb11e1b0398c747b5cfa12828263824 upstream.

The I2C host driver for SynQuacer fails to populate the of_node and
ACPI companion fields of the struct i2c_adapter it instantiates,
resulting in enumeration of the subordinate I2C bus to fail.

Fixes: 0d676a6c ("i2c: add support for Socionext SynQuacer I2C controller")
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d1493c5c
    • J
      mac80211: don't attempt to rename ERR_PTR() debugfs dirs · ec308112
      由 Johannes Berg 提交于 
      commit 517879147493a5e1df6b89a50f708f1133fcaddb upstream.

We need to dereference the directory to get its parent to
be able to rename it, so it's clearly not safe to try to
do this with ERR_PTR() pointers. Skip in this case.

It seems that this is most likely what was causing the
report by syzbot, but I'm not entirely sure as it didn't
come with a reproducer this time.

Cc: stable@vger.kernel.org
Reported-by: syzbot+4ece1a28b8f4730547c9@syzkaller.appspotmail.com
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ec308112
    • D
      mwifiex: Make resume actually do something useful again on SDIO cards · be7df63d
      由 Douglas Anderson 提交于 
      commit b82d6c1f8f8288f744a9dcc16cd3085d535decca upstream.

The commit fc3a2fca ("mwifiex: use atomic bitops to represent
adapter status variables") had a fairly straightforward bug in it.  It
contained this bit of diff:

 - if (!adapter->is_suspended) {
 + if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {

As you can see the patch missed the "!" when converting to the atomic
bitops.  This meant that the resume hasn't done anything at all since
that commit landed and suspend/resume for mwifiex SDIO cards has been
totally broken.

After fixing this mwifiex suspend/resume appears to work again, at
least with the simple testing I've done.

Fixes: fc3a2fca ("mwifiex: use atomic bitops to represent adapter status variables")
Cc: <stable@vger.kernel.org>
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be7df63d
    • E
      iwlwifi: fix driver operation for 5350 · 81a7534f
      由 Emmanuel Grumbach 提交于 
      commit 5c9adef9789148d382d7d1307c3d6bfaf51d143d upstream.

We introduced a bug that prevented this old device from
working. The driver would simply not be able to complete
the INIT flow while spewing this warning:

 CSR addresses aren't configured
 WARNING: CPU: 0 PID: 819 at drivers/net/wireless/intel/iwlwifi/pcie/drv.c:917
 iwl_pci_probe+0x160/0x1e0 [iwlwifi]

Cc: stable@vger.kernel.org # v4.18+
Fixes: a8cbb46f ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: c8f1b51e ("iwlwifi: allow different csr flags for different device families")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      81a7534f
  3. 05 5月, 2019 12 次提交