Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y

In most places it's cleaner to use the accessors cpu_sibling_mask()
and cpu_core_mask() wrappers which already exist.

I couldn't avoid cleaning up the access in oprofile, either.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This reverts commit e088e4c9.

Removing the sysfs interface for p4-clockmod was flagged as a
regression in bug 12826.

Course of action:
 - Find out the remaining causes of overheating, and fix them
   if possible. ACPI should be doing the right thing automatically.
   If it isn't, we need to fix that.
 - mark p4-clockmod ui as deprecated
 - try again with the removal in six months.

It's not really feasible to printk about the deprecation, because
it needs to happen at all the sysfs entry points, which means adding
a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch.
Signed-off-by: NDave Jones <davej@redhat.com>

Impact: Cleanup. No functional changes.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

There are two allocated per-cpu accessor macros with almost identical
spelling.  The original and far more popular is per_cpu_ptr (44
files), so change over the other 4 files.

tj: kill percpu_ptr() and update UP too
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: mingo@redhat.com
Cc: lenb@kernel.org
Cc: cpufreq@vger.kernel.org
Signed-off-by: NTejun Heo <tj@kernel.org>

Impact: fix powernow-k8 when acpi=off (or other error).

There was a spurious change introduced into powernow-k8 in this patch:
so that we try to "restore" the cpus_allowed we never saved.  We revert
that file.

See lkml "[PATCH] x86/powernow: fix cpus_allowed brokage when
acpi=off" from Yinghai for the bug report.

Cc: Mike Travis <travis@sgi.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

At this time, the PowerNow! driver for K8 uses an experimentally
derived formula to calculate transition latency.  The value it
provides is orders of magnitude too large on modern systems.
This patch replaces the formula with ACPI _PSS latency values
for more accuracy and better performance.

I've tested it on two 2nd generation Opteron systems, a 3rd
generation Operton system, and a Turion X2 without seeing any
stability problems.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NDave Jones <davej@redhat.com>

They were long enough set deprecated...

Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

-tip testing found this crash:

> [   35.258515] calling  acpi_cpufreq_init+0x0/0x127 @ 1
> [   35.264127] BUG: unable to handle kernel NULL pointer dereference at (null)
> [   35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73
> [   35.267554] PGD 0
> [   35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no
allocation of the variable mask, so we pass in an uninitialized cmd.mask
field to drv_read(), which then passes it to the scheduler which then
crashes ...

Switch it over to the much simpler constant-cpumask-pointers approach.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use new work_on_cpu function to reduce stack usage

Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().

Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.

Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Tested-by: NDieter Ries <clip2@gmx.de>
Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use new work_on_cpu function to reduce stack usage

Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().

Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.

Note: This patch basically reverts 50c668d6 which reverted 7503bfba, now
that the work_on_cpu() function is more stable.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Tested-by: NDieter Ries <clip2@gmx.de>
Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: <cpufreq@vger.kernel.org>

-tip testing found this crash:

> [   35.258515] calling  acpi_cpufreq_init+0x0/0x127 @ 1
> [   35.264127] BUG: unable to handle kernel NULL pointer dereference at (null)
> [   35.267554] IP: [<ffffffff80478092>] __bitmap_intersects+0x48/0x73
> [   35.267554] PGD 0
> [   35.267554] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC

arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c is still broken: there's no
allocation of the variable mask, so we pass in an uninitialized cmd.mask
field to drv_read(), which then passes it to the scheduler which then
crashes ...

Switch it over to the much simpler constant-cpumask-pointers approach.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix potential boot crash on MAXSMP

Remove code left over by:

  50c668d6: Revert "cpumask: use work_on_cpu in acpi-cpufreq.c for drv_read

That cmd.cpumask is not allocated anymore. No impact on default !MAXSMP
kernels.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit 7503bfba.

Dieter Ries reported bootup soft-hangs and bisected it back to
this commit, and reverting this commit gave him a working system.

The commit introduces work_on_cpu() use into the cpufreq code,
but that is subtly problematic from a lock hierarchy POV: the
hotplug-cpu lock is an highlevel lock that is taken before
lowlevel locks, and in this codepath we are called with the
policy lock taken.

Dieter did not have lockdep enabled so we dont have a nice stack
trace proof for this, but using work_on_cpu() in such a lowlevel
place certainly looks wrong, so we revert the patch.

work_on_cpu() needs to be reworked to be more generally usable.
Reported-by: NDieter Ries <clip2@gmx.de>
Tested-by: NDieter Ries <clip2@gmx.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Acked-by: NMark Fasheh <mfasheh@suse.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: James Morris <jmorris@namei.org>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Acked-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: use new cpumask API to reduce stack usage

Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for read_measured_perf_ctrs().

Basically splits off the work function from get_measured_perf which is
run on the designated cpu.  Moves definition of struct perf_cur out of
function local namespace, and is used as the work function argument.
References in get_measured_perf use values in the perf_cur struct.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use new cpumask API to reduce stack usage

Replace the saving of current->cpus_allowed and set_cpus_allowed_ptr() with
a work_on_cpu function for drv_read() and drv_write().

Basically converts do_drv_{read,write} into "work_on_cpu" functions that
are now called by drv_read and drv_write.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup, reduce stack usage, use new cpumask API.

Replace the cpumask_t in struct drv_cmd with a cpumask_var_t.  Remove unneeded
online_policy_cpus cpumask_t in acpi_cpufreq_target.  Update refs to use
new cpumask API.
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use new cpumask API to reduce memory usage

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NDave Jones <davej@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

There's only one user, and it's a fairly easy conversion.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Acked-by: NDave Jones <davej@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce inter-node memory traffic.

Reduces inter-node memory traffic (offloading the global system bus)
by allocating referenced struct cpumasks on the same node as the
referring struct.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Reduce memory usage, use new API.

This is part of an effort to reduce structure sizes for machines
configured with large NR_CPUS.  cpumask_t gets replaced by
cpumask_var_t, which is either struct cpumask[1] (small NR_CPUS) or
struct cpumask * (large NR_CPUS).

(Changes to powernow-k* by <travis>.)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add Celeron Core support to p4-clockmod.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NDave Jones <davej@redhat.com>

Add additional fsb values to pentium_core_get_frequency, from latest edition
(September 2008) of Intel 64 and IA-32 Architectures Software Develper's Manual,
Volume 3B: System Programming Guide, Part 2. Values added are to detect 800,
1067 and 1333 FSB types.
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NDave Jones <davej@redhat.com>

p4-clockmod has a long history of abuse.   It pretends to be a CPU
frequency scaling driver, even though it doesn't actually change
the CPU frequency, but instead just modulates the frequency with
wait-states.
The biggest misconception is that when running at the lower 'frequency'
p4-clockmod is saving power.  This isn't the case, as workloads running
slower take longer to complete, preventing the CPU from entering deep C states.

However p4-clockmod does have a purpose.  It can prevent overheating.
Having it hooked up to the cpufreq interfaces is the wrong way to achieve
cooling however. It should instead be hooked up to ACPI.

This diff introduces a means for a cpufreq driver to register with the
cpufreq core, but not present a sysfs interface.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NDave Jones <davej@redhat.com>

On those CPUs which are SpeedStep (EST) capable, we do not care at all if
p4-clockmod does not work, since a technically superior CPU frequency
management technology is to be used.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NDave Jones <davej@redhat.com>

Impact: cleanup

1) The #ifdef CONFIG_HOTPLUG_CPU seems unnecessary these days.
2) The loop can simply skip over offline cpus, rather than creating a tmp mask.
3) set_mask is set to either a single cpu or all online cpus in a policy.
   Since it's just used for set_cpus_allowed(), any offline cpus in a policy
   don't matter, so we can just use cpumask_of_cpu() or the policy->cpus.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Impact: new "power-tracer" ftrace plugin

This patch adds a C/P-state ftrace plugin that will generate
detailed statistics about the C/P-states that are being used,
so that we can look at detailed decisions that the C/P-state
code is making, rather than the too high level "average"
that we have today.

An example way of using this is:

 mount -t debugfs none /sys/kernel/debug
 echo cstate > /sys/kernel/debug/tracing/current_tracer
 echo 1 > /sys/kernel/debug/tracing/tracing_enabled
 sleep 1
 echo 0 > /sys/kernel/debug/tracing/tracing_enabled
 cat /sys/kernel/debug/tracing/trace | perl scripts/trace/cstate.pl > out.svg
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

A workaround for AMD CPU family 11h erratum 311 might cause that the
P-state Status Register shows a "current P-state" which is larger than
the "current P-state limit" in P-state Current Limit Register. For the
wrong P-state value there is no ACPI _PSS object defined and
powernow-k8/cpufreq can't determine the proper CPU frequency for that
state.

As a consequence this can cause a panic during boot (potentially with
all recent kernel versions -- at least I have reproduced it with
various 2.6.27 kernels and with the current .28 series), as an
example:

powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \
)
powernow-k8:    0 : pstate 0 (2200 MHz)
powernow-k8:    1 : pstate 1 (1100 MHz)
powernow-k8:    2 : pstate 2 (600 MHz)
BUG: unable to handle kernel paging request at ffff88086e7528b8
IP: [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
PGD 202063 PUD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16
RIP: 0010:[<ffffffff80486361>]  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0\
f
Synaptics claims to have extended capabilities, but I'm not able to read them.<6\
6
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0
RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c
RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080
R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10
R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000
Unable to initialize Synaptics hardware.
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0)
Stack:
 ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7
 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000
 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10
Call Trace:
 [<ffffffff804863c7>] ? cpufreq_stat_notifier_trans+0x51/0x83
 [<ffffffff8024b46c>] ? notifier_call_chain+0x29/0x4c
 [<ffffffff8024b561>] ? __srcu_notifier_call_chain+0x46/0x61
 [<ffffffff8048496d>] ? cpufreq_notify_transition+0x93/0xa9
 [<ffffffff8021ab8d>] ? powernowk8_target+0x1e8/0x5f3
 [<ffffffff80486687>] ? cpufreq_governor_performance+0x1b/0x20
 [<ffffffff80484886>] ? __cpufreq_governor+0x71/0xa8
 [<ffffffff80484b21>] ? __cpufreq_set_policy+0x101/0x13e
 [<ffffffff80485bcd>] ? cpufreq_add_dev+0x3f0/0x4cd
 [<ffffffff8048577a>] ? handle_update+0x0/0x8
 [<ffffffff803c2062>] ? sysdev_driver_register+0xb6/0x10d
 [<ffffffff8056592c>] ? powernowk8_init+0x0/0x7e
 [<ffffffff8048604c>] ? cpufreq_register_driver+0x8f/0x140
 [<ffffffff80209056>] ? _stext+0x56/0x14f
 [<ffffffff802c2234>] ? proc_register+0x122/0x17d
 [<ffffffff802c23a0>] ? create_proc_entry+0x73/0x8a
 [<ffffffff8025c259>] ? register_irq_proc+0x92/0xaa
 [<ffffffff8025c2c8>] ? init_irq_proc+0x57/0x69
 [<ffffffff807fc85f>] ? kernel_init+0x116/0x169
 [<ffffffff8020cc79>] ? child_rip+0xa/0x11
 [<ffffffff807fc749>] ? kernel_init+0x0/0x169
 [<ffffffff8020cc6f>] ? child_rip+0x0/0x11
Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\

RIP  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
 RSP <ffff88006fb83b20>
CR2: ffff88086e7528b8
---[ end trace 0678bac75e67a2f7 ]---
Kernel panic - not syncing: Attempted to kill init!

In short, aftereffect of the wrong P-state is that
cpufreq_stats_update() uses "-1" as index for some array in

cpufreq_stats_update (unsigned int cpu)
{
...
     if (stat->time_in_state)
                stat->time_in_state[stat->last_index] =
                        cputime64_add(stat->time_in_state[stat->last_index],
                                      cputime_sub(cur_time, stat->last_time));
...
}

Fortunately, the wrong P-state value is returned only if the core is
in P-state 0. This fix solves the problem by detecting the
out-of-range P-state, ignoring it, and using "0" instead.

Cc: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Update assorted email addresses and related info to point
to a single current, valid address.

additionally
- trivial CREDITS entry updates. (Not that this file means much any more)
- remove arjans dead redhat.com address from powernow driver
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Add a cpu parameter to __cpufreq_driver_getavg(). This is needed for software
cpufreq coordination where policy->cpu may not be same as the CPU on which we
want to getavg frequency.

A follow-on patch will use this parameter to getavg freq from all cpus
in policy->cpus.

Change since last patch. Fix the offline/online and suspend/resume
oops reported by Youquan Song <youquan.song@intel.com>
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NDave Jones <davej@redhat.com>

add error handling for cpufreq_register_driver() error
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: cpufreq@lists.linux.org.uk
Signed-off-by: NDave Jones <davej@redhat.com>

Before:
total: 11 errors, 15 warnings, 255 lines checked

After:
total: 0 errors, 6 warnings, 254 lines checked

paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/powernow-k6.o.*
476932f5e1ffe365db9d1dfb3f860369  /tmp/powernow-k6.o.after
476932f5e1ffe365db9d1dfb3f860369  /tmp/powernow-k6.o.before
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Before:
total: 15 errors, 10 warnings, 308 lines checked

After:
total: 0 errors, 4 warnings, 308 lines checked

paolo@paolo-desktop:~/linux.trees.git$ md5sum /tmp/elafreq.o.*
add1d36c2f077c5aab7682e8642a9f34  /tmp/elafreq.o.after
add1d36c2f077c5aab7682e8642a9f34  /tmp/elafreq.o.before

paolo@paolo-desktop:~/linux.trees.git$ size /tmp/elafreq.o.*
   text    data     bss     dec     hex filename
    934     270       4    1208     4b8 /tmp/elafreq.o.after
    934     270       4    1208     4b8 /tmp/elafreq.o.before
Signed-off-by: NPaolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Replace the no longer working links and email address in the
documentation and in source code.
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NDave Jones <davej@redhat.com>

Make use of FW_BUG interface to give vendors and users the ability to
automatically check for powernow-k8 related BIOS bugs by:
dmesg |grep "Firmware Bug"
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit 34ae7f35, which has
been reported to cause a number of problems.  During suspend and resume,
it apparently causes a crash in a CPU hotplug notifier to happen,
although the exact details are sketchy because of the inability to get
good traces during the suspend sequence.

See buzilla entries

	http://bugzilla.kernel.org/show_bug.cgi?id=11296
	http://bugzilla.kernel.org/show_bug.cgi?id=11339

for more examples and details.

[ Mark: "Revert the patch for now.  I'm still looking into getting a
  reliable reproduction and I do not have a fix at this time." ]
Requested-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NMark Langsdorf <mark.langsdorf@amd.com>
Acked-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@inux-foundation.org>

This patch provides support for the _PSD ACPI object in the Powernow-k8
driver.  Although it looks like an invasive patch, most of it is
simply the consequence of turning the static acpi_performance_data
structure into a pointer.

AMD has tested it on several machines over the past few days without issue.

[trivial checkpatch warnings fixed up by davej]
[X86_POWERNOW_K8_ACPI=n buildfix from Randy Dunlap]
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Tested-by: NFrank Arnold <frank.arnold@amd.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NDave Jones <davej@redhat.com>

Trivial whitespace fix for powernow-k8.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: NDave Jones <davej@redhat.com>

arch/x86/kernel/cpu/cpufreq/elanfreq.c:47:26: warning: symbol 'elan_multiplier' was not declared. Should it be static?

Yes, yes it should.
Signed-off-by: NDave Jones <davej@redhat.com>