In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

This driver shouldn't be using wdev->ssid to start with, as
it's more or less an internal field in cfg80211 used for
various purposes. Reading it is possible through nl80211,
even if that's not really what we should be doing there
for anything but AP type interfaces.

It *really* shouldn't allow modifying it!

Remove the whole debugfs entry.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Variable val is unsigned, so checking whether it is less than zero is
redundant.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Variable val is unsigned, so checking whether it is less than zero is
redundant.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

The current firmware 10.4-3.5.1-00035 on QCA9888 supports
TDLS explicit mode, it expects WMI_TDLS_ENABLE_PASSIVE
for tdls setup and WMI_TDLS_DISABLE for tdls teardown.
Signed-off-by: NAnilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Do not allow off channel operations like scans/roc when
there are active TDLS sessions.

The Current firmware 10.4-3.5.1-00035 on QCA9888 does not
supports any offchannel operations on active TDLS sessions,
either driver needs to block the offchannel operation requests
or should teardown the TDLS connection.
Signed-off-by: NAnilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

To be able to use ath10k_mac_tdls_vif_stations_count() in
ath10k_hw_scan() in the following patch, move the functions
earlier in the file.

This commit is pure code move, no functional changes.
Signed-off-by: NAnilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Build errors have been reported with CONFIG_PM=n:

drivers/net/wireless/ath/ath10k/pci.c:3416:8: error: implicit
declaration of function 'ath10k_pci_suspend'
[-Werror=implicit-function-declaration]

drivers/net/wireless/ath/ath10k/pci.c:3428:8: error: implicit
declaration of function 'ath10k_pci_resume'
[-Werror=implicit-function-declaration]

These are caused by the combination of the following two commits:

6af1de2e ("ath10k: mark PM functions as __maybe_unused")
96378bd2 ("ath10k: fix core PCI suspend when WoWLAN is supported but
disabled")

Both build fine on their own.

But now that ath10k_pci_pm_{suspend,resume}() is compiled
unconditionally, we should also compile ath10k_pci_{suspend,resume}()
unconditionally.

And drop the #ifdef around ath10k_pci_hif_{suspend,resume}() too; they
are trivial (empty), so we're not saving much space by compiling them
out. And the alternatives would be to sprinkle more __maybe_unused, or
spread the #ifdef's further.

Build tested with the following combinations:
CONFIG_PM=y && CONFIG_PM_SLEEP=y
CONFIG_PM=y && CONFIG_PM_SLEEP=n
CONFIG_PM=n

Fixes: 96378bd2 ("ath10k: fix core PCI suspend when WoWLAN is supported but disabled")
Fixes: 096ad2a15fd8 ("Merge branch 'ath-next'")
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

This way, we can apply the values when the NIC does come up.
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

When the user sets count to zero the string buffer would remain
completely uninitialized which causes the kernel to parse its
own stack data, potentially leading to an info leak. In addition
to that, the string might be not terminated properly when the
user data does not contain a 0-terminator.
Signed-off-by: NMiaoqing Pan <miaoqing@codeaurora.org>
Reviewed-by: NChristoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

QCA99x0 and QCA4019 family chips support CCMP-256, GCMP-128, and
GCMP-256 ciphers in hardware, so advertise support for these. As
firmware does not support group management frame ciphers (BIP),
handle them in software (mac80211).
Reviewed-by: NSebastian Gottschall <s.gottschall@dd-wrt.com>
Cc: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: NRajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Currently ath10k host enables power save support in station mode by
default for all firmwares but Power save for station mode still not supported
in some of the firmware versions. Which results in firmware crash while
issueing multiple scan commands.

Fix this problem by introducing new FW feature flag to check power save
support in firmware and then the firmware image can tell to ath10k that power
save mode is not supported in station mode.
Signed-off-by: NVenkateswara Naralasetty <vnaralas@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

For devices where the FW supports WoWLAN but user-space has not
configured it, we don't do any PCI-specific suspend/resume operations,
because mac80211 doesn't call drv_suspend() when !wowlan. This has
particularly bad effects for some platforms, because we don't stop the
power-save timer, and if this timer goes off after the PCI controller
has suspended the link, Bad Things will happen.

Commit 32faa3f0 ("ath10k: add the PCI PM core suspend/resume ops")
got some of this right, in that it understood there was a problem on
non-WoWLAN firmware. But it forgot the $subject case.

Fix this by moving all the PCI driver suspend/resume logic exclusively
into the driver PM hooks. This shouldn't affect WoWLAN support much
(this just gets executed later on).

I would just as well kill the entirety of ath10k_hif_suspend(), as it's
not even implemented on the USB or SDIO drivers. I expect that we don't
need the callback, except to return "supported" (i.e., 0) or "not
supported" (i.e., -EOPNOTSUPP).

Fixes: 32faa3f0 ("ath10k: add the PCI PM core suspend/resume ops")
Fixes: 77258d40 ("ath10k: enable pci soc powersaving")
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Cc: Ryan Hsu <ryanhsu@qti.qualcomm.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Don't populate the read-only array reg_hole_list on the stack, instead make
it static.  Makes the object code smaller by over 200 bytes:

Before:
   text	   data	    bss	    dec	    hex	filename
  57518	  15248	      0	  72766	  11c3e	debug.o

After:
   text	   data	    bss	    dec	    hex	filename
  57218	  15344	      0	  72562	  11b72	debug.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

wcn3620 can only operate on 2.4GHz band due to RF limitation.
If wcn36xx digital block is associated with an external IRIS
RF module, retrieve the id and disable 5GHz band in case of
wcn3620 id.
Signed-off-by: NLoic Poulain <loic.poulain@linaro.org>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Lockdep warns us that sc_pm_lock and cc_lock can cause a deadlock when
cc_lock is acquired by itself with interrupts enabled. Disable irqs
whenever taking cc_lock to avoid this.

[   19.094524] kworker/u2:0/5 just changed the state of lock:
[   19.094578]  (&(&sc->sc_pm_lock)->rlock){-.-...}, at: [<f836c00e>] ath_isr+0x15e/0x200 [ath9k]
[   19.094674] but this lock took another, HARDIRQ-unsafe lock in the past:
[   19.094731]  (&(&common->cc_lock)->rlock){+.-...}
[   19.094741]

               and interrupts could create inverse lock ordering between them.

[   19.094866]
               other info that might help us debug this:
[   19.094926]  Possible interrupt unsafe locking scenario:

[   19.094985]        CPU0                    CPU1
[   19.095036]        ----                    ----
[   19.095086]   lock(&(&common->cc_lock)->rlock);
[   19.095197]                                local_irq_disable();
[   19.095305]                                lock(&(&sc->sc_pm_lock)->rlock);
[   19.095423]                                lock(&(&common->cc_lock)->rlock);
[   19.095539]   <Interrupt>
[   19.095636]     lock(&(&sc->sc_pm_lock)->rlock);
[   19.095745]
                *** DEADLOCK ***

[   19.095965] 3 locks held by kworker/u2:0/5:
[   19.096067]  #0:  ("%s"wiphy_name(local->hw.wiphy)){.+.+.+}, at: [<c1067f37>] process_one_work+0x127/0x580
[   19.096260]  #1:  ((&local->dynamic_ps_enable_work)){+.+...}, at: [<c1067f37>] process_one_work+0x127/0x580
[   19.096447]  #2:  (&sc->mutex){+.+...}, at: [<f836b8b0>] ath9k_config+0x30/0x1d0 [ath9k]
[   19.096639]
               the shortest dependencies between 2nd lock and 1st lock:
[   19.096813]  -> (&(&common->cc_lock)->rlock){+.-...} ops: 38 {
[   19.096816]     HARDIRQ-ON-W at:
[   19.096816]                       __lock_acquire+0x57e/0x1260
[   19.096816]                       lock_acquire+0xb1/0x1c0
[   19.096816]                       _raw_spin_lock_bh+0x3f/0x50
[   19.096816]                       ath_chanctx_set_channel+0xb6/0x2c0 [ath9k]
[   19.096816]                       ath9k_config+0xa8/0x1d0 [ath9k]
[   19.096816]                       ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[   19.096816]                       ieee80211_do_open+0x67a/0x920 [mac80211]
[   19.096816]                       ieee80211_open+0x41/0x50 [mac80211]
[   19.096816]                       __dev_open+0xab/0x140
[   19.096816]                       __dev_change_flags+0x89/0x150
[   19.096816]                       dev_change_flags+0x28/0x60
[   19.096816]                       do_setlink+0x290/0x890
[   19.096816]                       rtnl_newlink+0x7cf/0x8e0
[   19.096816]                       rtnetlink_rcv_msg+0xbf/0x1f0
[   19.096816]                       netlink_rcv_skb+0xb9/0xe0
[   19.096816]                       rtnetlink_rcv+0x1e/0x30
[   19.096816]                       netlink_unicast+0x13a/0x2c0
[   19.096816]                       netlink_sendmsg+0x290/0x380
[   19.096816]                       ___sys_sendmsg+0x1e2/0x280
[   19.096816]                       __sys_sendmsg+0x3f/0x80
[   19.096816]                       SyS_socketcall+0x58c/0x6b0
[   19.096816]                       do_fast_syscall_32+0x96/0x1d0
[   19.096816]                       entry_SYSENTER_32+0x4c/0x7b
[   19.096816]     IN-SOFTIRQ-W at:
[   19.096816]                       __lock_acquire+0x55a/0x1260
[   19.096816]                       lock_acquire+0xb1/0x1c0
[   19.096816]                       _raw_spin_lock+0x3c/0x50
[   19.096816]                       ath_ps_full_sleep+0x24/0x70 [ath9k]
[   19.096816]                       call_timer_fn+0xa4/0x300
[   19.096816]                       run_timer_softirq+0x1b1/0x560
[   19.096816]                       __do_softirq+0xb0/0x430
[   19.096816]                       do_softirq_own_stack+0x33/0x40
[   19.096816]                       irq_exit+0xad/0xc0
[   19.096816]                       smp_apic_timer_interrupt+0x31/0x40
[   19.096816]                       apic_timer_interrupt+0x37/0x3c
[   19.096816]                       wp_page_copy+0xb8/0x580
[   19.096816]                       do_wp_page+0x64/0x420
[   19.096816]                       handle_mm_fault+0x430/0x990
[   19.096816]                       __do_page_fault+0x18b/0x430
[   19.096816]                       do_page_fault+0xb/0x10
[   19.096816]                       common_exception+0x62/0x6a
[   19.096816]     INITIAL USE at:
[   19.096816]                      __lock_acquire+0x204/0x1260
[   19.096816]                      lock_acquire+0xb1/0x1c0
[   19.096816]                      _raw_spin_lock_bh+0x3f/0x50
[   19.096816]                      ath_chanctx_set_channel+0xb6/0x2c0 [ath9k]
[   19.096816]                      ath9k_config+0xa8/0x1d0 [ath9k]
[   19.096816]                      ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[   19.096816]                      ieee80211_do_open+0x67a/0x920 [mac80211]
[   19.096816]                      ieee80211_open+0x41/0x50 [mac80211]
[   19.096816]                      __dev_open+0xab/0x140
[   19.096816]                      __dev_change_flags+0x89/0x150
[   19.096816]                      dev_change_flags+0x28/0x60
[   19.096816]                      do_setlink+0x290/0x890
[   19.096816]                      rtnl_newlink+0x7cf/0x8e0
[   19.096816]                      rtnetlink_rcv_msg+0xbf/0x1f0
[   19.096816]                      netlink_rcv_skb+0xb9/0xe0
[   19.096816]                      rtnetlink_rcv+0x1e/0x30
[   19.096816]                      netlink_unicast+0x13a/0x2c0
[   19.096816]                      netlink_sendmsg+0x290/0x380
[   19.096816]                      ___sys_sendmsg+0x1e2/0x280
[   19.096816]                      __sys_sendmsg+0x3f/0x80
[   19.096816]                      SyS_socketcall+0x58c/0x6b0
[   19.096816]                      do_fast_syscall_32+0x96/0x1d0
[   19.096816]                      entry_SYSENTER_32+0x4c/0x7b
[   19.096816]   }
[   19.096816]   ... key      at: [<f837b694>] __key.61991+0x0/0xffffc96c [ath9k]
[   19.096816]   ... acquired at:
[   19.096816]    lock_acquire+0xb1/0x1c0
[   19.096816]    _raw_spin_lock+0x3c/0x50
[   19.096816]    ath9k_ps_wakeup+0x85/0xe0 [ath9k]
[   19.096816]    ath9k_bss_info_changed+0x2a/0x1b0 [ath9k]
[   19.096816]    ieee80211_bss_info_change_notify+0xf3/0x360 [mac80211]
[   19.096816]    ieee80211_recalc_txpower+0x33/0x40 [mac80211]
[   19.096816]    ieee80211_set_tx_power+0x45/0x1d0 [mac80211]
[   19.096816]    cfg80211_wext_siwtxpower+0xd3/0x350 [cfg80211]
[   19.096816]    ioctl_standard_call+0x4e/0x400
[   19.096816]    wext_handle_ioctl+0xf4/0x190
[   19.096816]    dev_ioctl+0xb7/0x630
[   19.096816]    sock_ioctl+0x13e/0x2d0
[   19.096816]    do_vfs_ioctl+0x84/0x750
[   19.096816]    SyS_ioctl+0x34/0x60
[   19.096816]    do_fast_syscall_32+0x96/0x1d0
[   19.096816]    entry_SYSENTER_32+0x4c/0x7b

[   19.096816] -> (&(&sc->sc_pm_lock)->rlock){-.-...} ops: 597 {
[   19.096816]    IN-HARDIRQ-W at:
[   19.096816]                     __lock_acquire+0x6ae/0x1260
[   19.096816]                     lock_acquire+0xb1/0x1c0
[   19.096816]                     _raw_spin_lock_irqsave+0x45/0x60
[   19.096816]                     ath_isr+0x15e/0x200 [ath9k]
[   19.096816]                     __handle_irq_event_percpu+0x44/0x340
[   19.096816]                     handle_irq_event_percpu+0x1d/0x50
[   19.096816]                     handle_irq_event+0x32/0x60
[   19.096816]                     handle_level_irq+0x81/0x100
[   19.096816]                     handle_irq+0x9c/0xd0
[   19.096816]                     do_IRQ+0x5c/0x120
[   19.096816]                     common_interrupt+0x36/0x3c
[   19.096816]                     _raw_spin_unlock_irqrestore+0x57/0x70
[   19.096816]                     ath9k_config+0x16a/0x1d0 [ath9k]
[   19.096816]                     ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[   19.096816]                     ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[   19.096816]                     process_one_work+0x1d1/0x580
[   19.096816]                     worker_thread+0x31/0x380
[   19.096816]                     kthread+0xd9/0x110
[   19.096816]                     ret_from_fork+0x19/0x24
[   19.096816]    IN-SOFTIRQ-W at:
[   19.096816]                     __lock_acquire+0x55a/0x1260
[   19.096816]                     lock_acquire+0xb1/0x1c0
[   19.096816]                     _raw_spin_lock_irqsave+0x45/0x60
[   19.096816]                     ath9k_ps_wakeup+0x24/0xe0 [ath9k]
[   19.096816]                     ath9k_tasklet+0x42/0x260 [ath9k]
[   19.096816]                     tasklet_action+0x196/0x1e0
[   19.096816]                     __do_softirq+0xb0/0x430
[   19.096816]                     do_softirq_own_stack+0x33/0x40
[   19.096816]                     irq_exit+0xad/0xc0
[   19.096816]                     do_IRQ+0x65/0x120
[   19.096816]                     common_interrupt+0x36/0x3c
[   19.096816]                     get_page_from_freelist+0x20a/0x970
[   19.096816]                     __alloc_pages_nodemask+0xca/0xed0
[   19.096816]                     __get_free_pages+0x14/0x30
[   19.096816]                     pgd_alloc+0x1d/0x160
[   19.096816]                     mm_init.isra.47+0x13a/0x1b0
[   19.096816]                     copy_process.part.54+0xb55/0x1700
[   19.096816]                     _do_fork+0xd4/0x6a0
[   19.096816]                     SyS_clone+0x27/0x30
[   19.096816]                     do_fast_syscall_32+0x96/0x1d0
[   19.096816]                     entry_SYSENTER_32+0x4c/0x7b
[   19.096816]    INITIAL USE at:
[   19.096816]                    __lock_acquire+0x204/0x1260
[   19.096816]                    lock_acquire+0xb1/0x1c0
[   19.096816]                    _raw_spin_lock_irqsave+0x45/0x60
[   19.096816]                    ath9k_ps_wakeup+0x24/0xe0 [ath9k]
[   19.096816]                    ath9k_start+0x29/0x1f0 [ath9k]
[   19.096816]                    drv_start+0x71/0x270 [mac80211]
[   19.096816]                    ieee80211_do_open+0x31f/0x920 [mac80211]
[   19.096816]                    ieee80211_open+0x41/0x50 [mac80211]
[   19.096816]                    __dev_open+0xab/0x140
[   19.096816]                    __dev_change_flags+0x89/0x150
[   19.096816]                    dev_change_flags+0x28/0x60
[   19.096816]                    do_setlink+0x290/0x890
[   19.096816]                    rtnl_newlink+0x7cf/0x8e0
[   19.096816]                    rtnetlink_rcv_msg+0xbf/0x1f0
[   19.096816]                    netlink_rcv_skb+0xb9/0xe0
[   19.096816]                    rtnetlink_rcv+0x1e/0x30
[   19.096816]                    netlink_unicast+0x13a/0x2c0
[   19.096816]                    netlink_sendmsg+0x290/0x380
[   19.096816]                    ___sys_sendmsg+0x1e2/0x280
[   19.096816]                    __sys_sendmsg+0x3f/0x80
[   19.096816]                    SyS_socketcall+0x58c/0x6b0
[   19.096816]                    do_fast_syscall_32+0x96/0x1d0
[   19.096816]                    entry_SYSENTER_32+0x4c/0x7b
[   19.096816]  }
[   19.096816]  ... key      at: [<f837b67c>] __key.61994+0x0/0xffffc984 [ath9k]
[   19.096816]  ... acquired at:
[   19.096816]    check_usage_forwards+0x118/0x120
[   19.096816]    mark_lock+0x2e4/0x590
[   19.096816]    __lock_acquire+0x6ae/0x1260
[   19.096816]    lock_acquire+0xb1/0x1c0
[   19.096816]    _raw_spin_lock_irqsave+0x45/0x60
[   19.096816]    ath_isr+0x15e/0x200 [ath9k]
[   19.096816]    __handle_irq_event_percpu+0x44/0x340
[   19.096816]    handle_irq_event_percpu+0x1d/0x50
[   19.096816]    handle_irq_event+0x32/0x60
[   19.096816]    handle_level_irq+0x81/0x100
[   19.096816]    handle_irq+0x9c/0xd0
[   19.096816]    do_IRQ+0x5c/0x120
[   19.096816]    common_interrupt+0x36/0x3c
[   19.096816]    _raw_spin_unlock_irqrestore+0x57/0x70
[   19.096816]    ath9k_config+0x16a/0x1d0 [ath9k]
[   19.096816]    ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[   19.096816]    ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[   19.096816]    process_one_work+0x1d1/0x580
[   19.096816]    worker_thread+0x31/0x380
[   19.096816]    kthread+0xd9/0x110
[   19.096816]    ret_from_fork+0x19/0x24

[   19.096816]
               stack backtrace:
[   19.096816] CPU: 0 PID: 5 Comm: kworker/u2:0 Not tainted 4.13.0-mgm-ovl+ #51
[   19.096816] Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26  05/10/2004
[   19.096816] Workqueue: phy0 ieee80211_dynamic_ps_enable_work [mac80211]
[   19.096816] Call Trace:
[   19.096816]  <IRQ>
[   19.096816]  dump_stack+0x16/0x19
[   19.096816]  print_irq_inversion_bug.part.37+0x16c/0x179
[   19.096816]  check_usage_forwards+0x118/0x120
[   19.096816]  ? ret_from_fork+0x19/0x24
[   19.096816]  ? print_shortest_lock_dependencies+0x1a0/0x1a0
[   19.096816]  mark_lock+0x2e4/0x590
[   19.096816]  ? print_shortest_lock_dependencies+0x1a0/0x1a0
[   19.096816]  __lock_acquire+0x6ae/0x1260
[   19.096816]  lock_acquire+0xb1/0x1c0
[   19.096816]  ? ath_isr+0x15e/0x200 [ath9k]
[   19.096816]  _raw_spin_lock_irqsave+0x45/0x60
[   19.096816]  ? ath_isr+0x15e/0x200 [ath9k]
[   19.096816]  ath_isr+0x15e/0x200 [ath9k]
[   19.096816]  __handle_irq_event_percpu+0x44/0x340
[   19.096816]  handle_irq_event_percpu+0x1d/0x50
[   19.096816]  handle_irq_event+0x32/0x60
[   19.096816]  ? handle_nested_irq+0x100/0x100
[   19.096816]  handle_level_irq+0x81/0x100
[   19.096816]  handle_irq+0x9c/0xd0
[   19.096816]  </IRQ>
[   19.096816]  do_IRQ+0x5c/0x120
[   19.096816]  common_interrupt+0x36/0x3c
[   19.096816] EIP: _raw_spin_unlock_irqrestore+0x57/0x70
[   19.096816] EFLAGS: 00000286 CPU: 0
[   19.096816] EAX: f60a3600 EBX: 00000286 ECX: 00000006 EDX: 00000001
[   19.096816] ESI: f46c9e68 EDI: f46c8620 EBP: f60b5e8c ESP: f60b5e84
[   19.096816]  DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
[   19.096816]  ath9k_config+0x16a/0x1d0 [ath9k]
[   19.096816]  ieee80211_hw_config+0xa8/0x5f0 [mac80211]
[   19.096816]  ? ieee80211_hw_config+0x1db/0x5f0 [mac80211]
[   19.096816]  ieee80211_dynamic_ps_enable_work+0x1c3/0x680 [mac80211]
[   19.096816]  ? process_one_work+0x127/0x580
[   19.096816]  ? process_one_work+0x127/0x580
[   19.096816]  process_one_work+0x1d1/0x580
[   19.096816]  ? process_one_work+0x127/0x580
[   19.096816]  worker_thread+0x31/0x380
[   19.096816]  kthread+0xd9/0x110
[   19.096816]  ? process_one_work+0x580/0x580
[   19.096816]  ? kthread_create_on_node+0x30/0x30
[   19.096816]  ret_from_fork+0x19/0x24

Cc: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: netdev@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Make them const as they are not modified in the file referencing
them. They are only stored in the const field 'hw_ce_reg' of an ath10k
structure. Also, make the declarations in the header const.
Signed-off-by: NBhumika Goyal <bhumirks@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Use ARRAY_SIZE macro, rather than explicitly coding some variant of it
yourself.
Found with: find -type f -name "*.c" -o -name "*.h" | xargs perl -p -i -e
's/\bsizeof\s*\(\s*(\w+)\s*\)\s*\ /\s*sizeof\s*\(\s*\1\s*\[\s*0\s*\]\s*\)
/ARRAY_SIZE(\1)/g' and manual check/verification.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

casting to void pointer from any pointer type and vice-versa is done
implicitly and therefore casting is not needed in such a case.

Done using Coccinellle.
Semantic Patch used :

@r@
expression x;
void* e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)
Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Use setup_timer function instead of initializing timer with the
    function and data fields.
Signed-off-by: NAllen Pais <allen.lkml@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_PM_SLEEP is disabled, we get a compile-time
warning:

drivers/net/wireless/ath/ath10k/pci.c:3417:12: error: 'ath10k_pci_pm_resume' defined but not used [-Werror=unused-function]
 static int ath10k_pci_pm_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/ath/ath10k/pci.c:3401:12: error: 'ath10k_pci_pm_suspend' defined but not used [-Werror=unused-function]
 static int ath10k_pci_pm_suspend(struct device *dev)

Rather than fixing the #ifdef, this just marks both functions
as __maybe_unused, which is a more robust way to do this.

Fixes: 32faa3f0 ("ath10k: add the PCI PM core suspend/resume ops")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

ACPI will rely on device driver to tell it if the device could support
wakeup function when system in D3 state.

This has caused some platform can't support remote wakeup correctly,
because the ACPI wakeup GPE is not enabled, hence registers the .set_wakeup
callback to handle it if device supports wakeup.

Tested with QCA6174 hw3.0, firmware ('WLAN.RM.4.4.1-00008-QCARMSWP-1')
Signed-off-by: NRyan Hsu <ryanhsu@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

The actual PCI suspend/resume in ath10k has been handled in wow.c,
but in the case of the device doesn't support remote wakeup,
the .hif_suspend() and .hif_resume() will never be handled.

  ath10k_wow_op_suspend()
  {
	if (WARN_ON(!test_bit(ATH10K_FW_FEATURE_WOWLAN_SUPPORT,
		    ar->running_fw->fw_file.fw_features))) {
		ret = 1;
		goto exit;
	}

	....

	ret = ath10k_hif_suspend(ar);
  }

So register the PCI PM core to support the suspend/resume if the device
doesn't support remote wakeup.
Signed-off-by: NRyan Hsu <ryanhsu@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

User space can remove the P2P management interface while it is active
(for example, while listen/search is active) and this can cause
a crash. Ensure the P2P device is fully stopped before removing.
Signed-off-by: NLior David <qca_liord@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Connect can take longer than current timeout in some scenarios,
for example with long-range antenna array. Increase the timeout
to support these scenarios.
Signed-off-by: NLior David <qca_liord@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

When FW starts running it can get D0 to D3 interrupt that is a leftover
from previous system suspend while FW was not running.
As this interrupt is not relevant anymore, clear it part of device reset
procedure.
Signed-off-by: NDedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Re-arrange the code to have dedicated function for device configuration
which takes place before FW starts running.
Signed-off-by: NDedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: NLazar Alexei <qca_ailizaro@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Since debugfs is a kernel configuration option, enable the driver to
compile without debugfs.
Signed-off-by: NGidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: NHamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Sometimes there is a firmware crash but the hardware
is not fully stopped and continue to send TX/RX interrupts.
This can cause an overload of messages which can bring the
host down. Add ratelimit to these error messages to fix this.
Signed-off-by: NLior David <qca_liord@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

In commit 9f5bcfe9 ("ath10k: silence firmware file probing
warnings") the firmware loading was changed from request_firmware() to
request_firmware_direct() to silence some warnings in case it fails.
request_firmware_direct() directly searches in the file system only and
does not send a hotplug event to user space in case it could not find
the firmware directly.
In LEDE we use a user space script to extract the calibration data from
the flash memory which gets triggered by the hotplug event. This way the
firmware gets extracted from some vendor specific partition when the
driver requests this firmware. This mechanism does not work any more
after this change.

Fixes: 9f5bcfe9 ("ath10k: silence firmware file probing warnings")
Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de>
Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

irq_wq in struct ath10k_sdio is a remnant from an earlier
version of the sdio patchset.

Its use was removed as a result of Kalle's review, but somehow
the struct member survived.

It is not used and can therefore safely be removed.
Signed-off-by: NErik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

In napi_poll, the budget number is used to control the amount of packets
we should handle per poll to balance the resource in the system.

In the list of the amsdu packets reception, we check if there is budget
count left and handle the complete list of the packets, that it will have
chances the very last list will over the budget leftover.

So adding one more parameter - budget_left, this would help while
traversing the list to avoid handling more than the budget given.
Reported-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Fix-suggested-by: NIgor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Link: https://lkml.kernel.org/r/26670dce-4dd2-f8e4-0e14-90d74257e739@virtuozzo.comSigned-off-by: NRyan Hsu <ryanhsu@qti.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: NSteve deRosier <derosier@gmail.com>
Tested-by: NSteve deRosier <derosier@gmail.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

vring_idle_trsh is used in the operational driver, hence
should not be defined as a debugfs variable.
Signed-off-by: NGidon Studinski <qca_gidons@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

Store initial FW RF calibration result in driver. Set this calibration
result back to FW after each FW reset in order to avoid future calibration
procedures.
Signed-off-by: NDedy Lansky <qca_dlansky@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>

While wil_open is executed, any call to netif_running
would return a success. In case there are failures
within wil_open, should not treat the device as if it
is already opened in relevant functions (like FW recovery
and runtime suspend check).

Fix that by checking the device up flag instead.
Signed-off-by: NHamad Kadmany <qca_hkadmany@qca.qualcomm.com>
Signed-off-by: NMaya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>