- 10 4月, 2012 7 次提交
-
-
由 Julia Lawall 提交于
Free extra as done in the error-handling code just above. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
When the rate-control indexing is incorrectly set up, mac80211 issues a warning and returns NULL from the call to ieee80211_get_tx_rate(). When this happens, avoid a NULL pointer dereference. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
When the control-rate tables are not set up correctly, it makes little sense to spam the logs, thus change the WARN_ON to WARN_ON_ONCE. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Before the switch to asynchronous firmware loading (mainline commit b0302aba), it was necessary to load firmware when initializing the first of the units in a dual-mac system. After the change, it is necessary to load firmware in both units. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The nl80211 handling code should ensure as much as it can that the interface is in a valid state, it can certainly ensure the interface is running. Not doing so can cause calls through mac80211 into the driver that result in warnings and unspecified behaviour in the driver. Cc: stable@vger.kernel.org Reported-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The TU_TO_EXP_TIME() macro already includes the "jiffies +" piece of the calculation, so don't add jiffies again. Reported-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Tested-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 07 4月, 2012 2 次提交
-
-
由 Linus Torvalds 提交于
I have a new optimized x86 "strncpy_from_user()" that will use these same helper functions for all the same reasons the name lookup code uses them. This is preparation for that. This moves them into an architecture-specific header file. It's architecture-specific for two reasons: - some of the functions are likely to want architecture-specific implementations. Even if the current code happens to be "generic" in the sense that it should work on any little-endian machine, it's likely that the "multiply by a big constant and shift" implementation is less than optimal for an architecture that has a guaranteed fast bit count instruction, for example. - I expect that if architectures like sparc want to start playing around with this, we'll need to abstract out a few more details (in particular the actual unaligned accesses). So we're likely to have more architecture-specific stuff if non-x86 architectures start using this. (and if it turns out that non-x86 architectures don't start using this, then having it in an architecture-specific header is still the right thing to do, of course) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ...
-
- 06 4月, 2012 31 次提交
-
-
由 Eric Dumazet 提交于
As soon as an skb is queued into socket error queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As soon as an skb is queued into socket receive_queue, another thread can consume it, so we are not allowed to reference skb anymore, or risk use after free. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commit dc1f8bf6 ('netdev: change transmit to limited range type') changed the required return type and 9a1654ba ('net: Optimize hard_start_xmit() return checking') changed the valid numerical return values. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commit 08baf561 ('net: txq_trans_update() helper') made it unnecessary for most drivers to set net_device::trans_start (or netdev_queue::trans_start). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commits d314774c ('netdev: network device operations infrastructure') and 00829823 ('netdev: add more functions to netdevice ops') moved and renamed net device operation pointers. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commits e308a5d8 ('netdev: Add netdev->addr_list_lock protection.') and e8a0464c ('netdev: Allocate multiple queues for TX.') introduced more fine-grained locks. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commit bea3348e ('[NET]: Make NAPI polling independent of struct net_device objects.') removed the automatic disabling of NAPI polling by dev_close(), and drivers must now do this themselves. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Commit e52ac339 ('net: Use device model to get driver name in skb_gso_segment()') removed the only in-tree caller of ethtool ops that doesn't hold the RTNL lock. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin由 Linus Torvalds 提交于
Pull a few blackfin compile fixes from Bob Liu. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: blackfin: update defconfig for bf527-ezkit blackfin: gpio: fix compile error if !CONFIG_GPIOLIB blackfin: fix L1 data A overflow link issue
-
由 Bob Liu 提交于
To fix compile error: drivers/usb/musb/blackfin.h:51:3: error: #error "Please use PIO mode in MUSB driver on bf52x chip v0.0 and v0.1" make[4]: *** [drivers/usb/musb/blackfin.o] Error 1 Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Bob Liu 提交于
Add __gpio_get_value()/__gpio_set_value() to fix compile error if CONFIG_GPIOLIB = n. Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
由 Mike Frysinger 提交于
This patch fix below compile error: "bfin-uclinux-ld: L1 data A overflow!" It is due to the recent lib/gen_crc32table.c change: 46c5801e crc32: bolt on crc32c it added 8KiB more data to __cacheline_aligned which cause blackfin L1 data cache overflow. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBob Liu <lliubbo@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm由 Linus Torvalds 提交于
Pull an APM fix from Jiri Kosina: "One deadlock/race fix from Niel that got introduced when we were moving away from freezer_*_count() to wait_event_freezable()." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm: APM: fix deadlock in APM_IOC_SUSPEND ioctl
-
由 Olof Johansson 提交于
Merge tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley: OMAP clock, powerdomain, clockdomain, and hwmod fixes intended for the early v3.4-rc series. Also contains an HSMMC integration refinement of an earlier hardware bug workaround. * tag 'omap-fixes-a2-for-3.4rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() ARM: OMAP AM3517/3505: clock data: change EMAC clocks aliases ARM: OMAP: clock: fix race in disable all clocks ARM: OMAP4: hwmod data: Add aliases for McBSP fclk clocks ARM: OMAP3xxx: clock data: fix DPLL4 CLKSEL masks ARM: OMAP3xxx: HSMMC: avoid erratum workaround when transceiver is attached ARM: OMAP44xx: clockdomain data: correct the emu_sys_clkdm CLKTRCTRL data
-
由 stephen hemminger 提交于
Marvell has agreed to do maintenance on the sky2 driver. * Add the developer to the maintainers file * Remove the old reference to the long gone (sk98lin) driver * Rearrange to fit current topic organization Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NJay Vosburgh <fubar@us.ibm.com> Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NMarcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sasha Levin 提交于
A phonet packet is limited to USHRT_MAX bytes, this is never checked during tx which means that the user can specify any size he wishes, and the kernel will attempt to allocate that size. In the good case, it'll lead to the following warning, but it may also cause the kernel to kick in the OOM and kill a random task on the server. [ 8921.744094] WARNING: at mm/page_alloc.c:2255 __alloc_pages_slowpath+0x65/0x730() [ 8921.749770] Pid: 5081, comm: trinity Tainted: G W 3.4.0-rc1-next-20120402-sasha #46 [ 8921.756672] Call Trace: [ 8921.758185] [<ffffffff810b2ba7>] warn_slowpath_common+0x87/0xb0 [ 8921.762868] [<ffffffff810b2be5>] warn_slowpath_null+0x15/0x20 [ 8921.765399] [<ffffffff8117eae5>] __alloc_pages_slowpath+0x65/0x730 [ 8921.769226] [<ffffffff81179c8a>] ? zone_watermark_ok+0x1a/0x20 [ 8921.771686] [<ffffffff8117d045>] ? get_page_from_freelist+0x625/0x660 [ 8921.773919] [<ffffffff8117f3a8>] __alloc_pages_nodemask+0x1f8/0x240 [ 8921.776248] [<ffffffff811c03e0>] kmalloc_large_node+0x70/0xc0 [ 8921.778294] [<ffffffff811c4bd4>] __kmalloc_node_track_caller+0x34/0x1c0 [ 8921.780847] [<ffffffff821b0e3c>] ? sock_alloc_send_pskb+0xbc/0x260 [ 8921.783179] [<ffffffff821b3c65>] __alloc_skb+0x75/0x170 [ 8921.784971] [<ffffffff821b0e3c>] sock_alloc_send_pskb+0xbc/0x260 [ 8921.787111] [<ffffffff821b002e>] ? release_sock+0x7e/0x90 [ 8921.788973] [<ffffffff821b0ff0>] sock_alloc_send_skb+0x10/0x20 [ 8921.791052] [<ffffffff824cfc20>] pep_sendmsg+0x60/0x380 [ 8921.792931] [<ffffffff824cb4a6>] ? pn_socket_bind+0x156/0x180 [ 8921.794917] [<ffffffff824cb50f>] ? pn_socket_autobind+0x3f/0x90 [ 8921.797053] [<ffffffff824cb63f>] pn_socket_sendmsg+0x4f/0x70 [ 8921.798992] [<ffffffff821ab8e7>] sock_aio_write+0x187/0x1b0 [ 8921.801395] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.803501] [<ffffffff8111842c>] ? __lock_acquire+0x42c/0x4b0 [ 8921.805505] [<ffffffff821ab760>] ? __sock_recv_ts_and_drops+0x140/0x140 [ 8921.807860] [<ffffffff811e07cc>] do_sync_readv_writev+0xbc/0x110 [ 8921.809986] [<ffffffff811958e7>] ? might_fault+0x97/0xa0 [ 8921.811998] [<ffffffff817bd99e>] ? security_file_permission+0x1e/0x90 [ 8921.814595] [<ffffffff811e17e2>] do_readv_writev+0xe2/0x1e0 [ 8921.816702] [<ffffffff810b8dac>] ? do_setitimer+0x1ac/0x200 [ 8921.818819] [<ffffffff810e2ec1>] ? get_parent_ip+0x11/0x50 [ 8921.820863] [<ffffffff810e325e>] ? sub_preempt_count+0xae/0xf0 [ 8921.823318] [<ffffffff811e1926>] vfs_writev+0x46/0x60 [ 8921.825219] [<ffffffff811e1a3f>] sys_writev+0x4f/0xb0 [ 8921.827127] [<ffffffff82658039>] system_call_fastpath+0x16/0x1b [ 8921.829384] ---[ end trace dffe390f30db9eb7 ]--- Signed-off-by: NSasha Levin <levinsasha928@gmail.com> Acked-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit 2f533844 (tcp: allow splice() to build full TSO packets) added a regression for splice() calls using SPLICE_F_MORE. We need to call tcp_flush() at the end of the last page processed in tcp_sendpages(), or else transmits can be deferred and future sends stall. Add a new internal flag, MSG_SENDPAGE_NOTLAST, acting like MSG_MORE, but with different semantic. For all sendpage() providers, its a transparent change. Only sock_sendpage() and tcp_sendpages() can differentiate the two different flags provided by pipe_to_sendpage() Reported-by: NTom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NEric Dumazet <eric.dumazet@gmail>com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
-
由 Michal Hocko 提交于
Although mem_cgroup_uncharge_swap has an empty placeholder for !CONFIG_CGROUP_MEM_RES_CTLR_SWAP the definition is placed in the CONFIG_SWAP ifdef block so we are missing the same definition for !CONFIG_SWAP which implies !CONFIG_CGROUP_MEM_RES_CTLR_SWAP. This has not been an issue before, because mem_cgroup_uncharge_swap was not called from !CONFIG_SWAP context. But Hugh Dickins has a cleanup patch to call __mem_cgroup_commit_charge_swapin which is defined also for !CONFIG_SWAP. Let's move both the empty definition and declaration outside of the CONFIG_SWAP block to avoid the following compilation error: mm/memcontrol.c: In function '__mem_cgroup_commit_charge_swapin': mm/memcontrol.c:2837: error: implicit declaration of function 'mem_cgroup_uncharge_swap' if CONFIG_SWAP is disabled. Reported-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NMichal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ashish Jangam 提交于
DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com> Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Fleming 提交于
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by: NMark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christopher Li 提交于
Signed-off-by: NChristopher Li <sparse@chrisli.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joe Perches 提交于
remoteproc.txt should have been .h Signed-off-by: NJoe Perches <joe@perches.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Fleming 提交于
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NMatt Fleming <matt.fleming@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Julia Lawall 提交于
Find instances of an open-coded simple_open() and replace them with calls to simple_open(). Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Reported-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Boyd 提交于
debugfs and a few other drivers use an open-coded version of simple_open() to pass a pointer from the file to the read/write file ops. Add support for this simple case to libfs so that we can remove the many duplicate copies of this simple function. Signed-off-by: NStephen Boyd <sboyd@codeaurora.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hillf Danton 提交于
It was introduced by d1d5e05f ("hugetlbfs: return error code when initializing module") but as Al pointed out, is a bad idea. Quoted comments from Al: "Note that unregister_filesystem() in module init is *always* wrong; it's not an issue here (it's done too early to care about and realistically the box is not going anywhere - it'll panic when attempt to exec /sbin/init fails, if not earlier), but it's a damn bad example. Consider a normal fs module. Somebody loads it and in parallel with that we get a mount attempt on that fs type. It comes between register and failure exits that causes unregister; at that point we are screwed since grabbing a reference to module as done by mount is enough to prevent exit, but not to prevent the failure of init. As the result, module will get freed when init fails, mounted fs of that type be damned." So remove it. Signed-off-by: NHillf Danton <dhillf@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jett.Zhou 提交于
According to 88pm860x spec, rtc alarm irq enable control is bit3 for RTC_ALARM_EN, so fix it. Signed-off-by: NJett.Zhou <jtzhou@marvell.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-