- 07 3月, 2017 1 次提交
-
-
由 James Smart 提交于
From: Colin Ian King <colin.king@canonical.com> The sanity check for hrq should be moved to before the deference of hrq to ensure we don't perform a null pointer deference. Detected by CoverityScan, CID#1411650 ("Dereference before null check") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 23 2月, 2017 9 次提交
-
-
由 James Smart 提交于
Update copyrights to 2017 for all files touched in this patch set Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Target: Tie in to NVME Fabrics nvmet_fc LLDD target api Adds the routines to: - register and deregister the FC port as a nvmet-fc targetport - binding of nvme queues to adapter WQs - receipt and passing of NVME LS's to transport, sending transport response - receipt of NVME FCP CMD IUs, processing FCP target io data transmission commands; transmission of FCP io response - Abort operations for tgt io exchanges [mkp: fixed space at end of file warning] Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Target: Receive buffer updates Allocates buffer pools and configures adapter interfaces to handle receive buffer (asynchronous FCP CMD ius, first burst data) from the adapter. Splits by protocol, etc. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Target: Base modifications This set of patches adds the base modifications for NVME target support The base modifications consist of: - Additional module parameters or configuration tuning - Enablement of configuration mode for NVME target. Ties into the queueing model put into place by the initiator basemods patches. - Target-specific buffer pools, dma pools, sgl pools [mkp: fixed space at end of file] Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Initiator: Add debugfs support Adds debugfs snippets to cover the new NVME initiator functionality Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Initiator: Tie in to NVME Fabrics nvme_fc LLDD initiator api Adds the routines to: - register and deregister the FC port as a nvme-fc initiator localport - register and deregister remote FC ports as a nvme-fc remoteport - binding of nvme queues to adapter WQs - send/perform NVME LS's - send/perform NVME FCP initiator io operations Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
NVME Initiator: Base modifications This patch adds base modifications for NVME initiator support. The base modifications consist of: - Formal split of SLI3 rings from SLI-4 WQs (sometimes referred to as rings as well) as implementation now widely varies between the two. - Addition of configuration modes: SCSI initiator only; NVME initiator only; NVME target only; and SCSI and NVME initiator. The configuration mode drives overall adapter configuration, offloads enabled, and resource splits. NVME support is only available on SLI-4 devices and newer fw. - Implements the following based on configuration mode: - Exchange resources are split by protocol; Obviously, if only 1 mode, then no split occurs. Default is 50/50. module attribute allows tuning. - Pools and config parameters are separated per-protocol - Each protocol has it's own set of queues, but share interrupt vectors. SCSI: SLI3 devices have few queues and the original style of queue allocation remains. SLI4 devices piggy back on an "io-channel" concept that eventually needs to merge with scsi-mq/blk-mq support (it is underway). For now, the paradigm continues as it existed prior. io channel allocates N msix and N WQs (N=4 default) and either round robins or uses cpu # modulo N for scheduling. A bunch of module parameters allow the configuration to be tuned. NVME (initiator): Allocates an msix per cpu (or whatever pci_alloc_irq_vectors gets) Allocates a WQ per cpu, and maps the WQs to msix on a WQ # modulo msix vector count basis. Module parameters exist to cap/control the config if desired. - Each protocol has its own buffer and dma pools. I apologize for the size of the patch. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> ---- Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
This contains code cleanups that were in the prior patch set. This allows better review of real changes later. minor code cleanups: fix indentation, punctuation, line length addition/reduction of whitespace remove unneeded parens, braces lpfc_debugfs_nodelist_data: print as u64 rather than byte by byte covert printk(KERN_ERR to pr_err small print string deltas use num_present_cpus() rather than count them comment updates rctl/type names moved to module variable, not on stack Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Correct WQ creation for pagesize The driver was calculating the adapter command pagesize indicator from the system pagesize. However, the buffers the driver allocates are only one size (SLI4_PAGE_SIZE), so no calculation was necessary. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 1月, 2017 1 次提交
-
-
由 Roberto Sassu 提交于
Set variables initialized in lpfc_sli4_alloc_resource_identifiers() to NULL if an error occurred. Otherwise, lpfc_sli4_driver_resource_unset() attempts to free the memory again. Signed-off-by: NRoberto Sassu <rsassu@suse.de> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Acked-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 05 1月, 2017 4 次提交
-
-
由 James Smart 提交于
On loosely ordered memory systems (PPC for example), the WQE elements were being updated in memory, but not necessarily flushed before the separate doorbell was written to hw which would cause hw to dma the WQE element. Thus, the hardware occasionally received partially updated WQE data. Add the memory barrier after updating the WQE memory. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Correct oops on vport port resets. Incorrect WQE type, thus the clearing code actually overstepped the WQE. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Correct issue leading to oops during link reset. Missing vport pointer. [mkp: fixed typo] Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Correct error in setting OS Driver Version with FW. Prior length was too short. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@Suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 25 11月, 2016 1 次提交
-
-
The BUG_ON() recently introduced in lpfc_sli_ringtxcmpl_put() is hit in the lpfc_els_abort() > lpfc_sli_issue_abort_iotag() > lpfc_sli_abort_iotag_issue() function path [similar names], due to 'piocb->vport == NULL': BUG_ON(!piocb || !piocb->vport); This happens because lpfc_sli_abort_iotag_issue() doesn't set the 'abtsiocbp->vport' pointer -- but this is not the problem. Previously, lpfc_sli_ringtxcmpl_put() accessed 'piocb->vport' only if 'piocb->iocb.ulpCommand' is neither CMD_ABORT_XRI_CN nor CMD_CLOSE_XRI_CN, which are the only possible values for lpfc_sli_abort_iotag_issue(): lpfc_sli_ringtxcmpl_put(): if ((unlikely(pring->ringno == LPFC_ELS_RING)) && (piocb->iocb.ulpCommand != CMD_ABORT_XRI_CN) && (piocb->iocb.ulpCommand != CMD_CLOSE_XRI_CN) && (!(piocb->vport->load_flag & FC_UNLOADING))) lpfc_sli_abort_iotag_issue(): if (phba->link_state >= LPFC_LINK_UP) iabt->ulpCommand = CMD_ABORT_XRI_CN; else iabt->ulpCommand = CMD_CLOSE_XRI_CN; So, this function path would not have hit this possible NULL pointer dereference before. In order to fix this regression, move the second part of the BUG_ON() check prior to the pointer dereference that it does check for. For reference, this is the stack trace observed. The problem happened because an unsolicited event was received - a PLOGI was received after our PLOGI was issued but not yet complete, so the discovery state machine goes on to sw-abort our PLOGI. kernel BUG at drivers/scsi/lpfc/lpfc_sli.c:1326! Oops: Exception in kernel mode, sig: 5 [#1] <...> NIP [...] lpfc_sli_ringtxcmpl_put+0x1c/0xf0 [lpfc] LR [...] __lpfc_sli_issue_iocb_s4+0x188/0x200 [lpfc] Call Trace: [...] [...] __lpfc_sli_issue_iocb_s4+0xb0/0x200 [lpfc] (unreliable) [...] [...] lpfc_sli_issue_abort_iotag+0x2b4/0x350 [lpfc] [...] [...] lpfc_els_abort+0x1a8/0x4a0 [lpfc] [...] [...] lpfc_rcv_plogi+0x6d4/0x700 [lpfc] [...] [...] lpfc_rcv_plogi_plogi_issue+0xd8/0x1d0 [lpfc] [...] [...] lpfc_disc_state_machine+0xc0/0x2b0 [lpfc] [...] [...] lpfc_els_unsol_buffer+0xcc0/0x26c0 [lpfc] [...] [...] lpfc_els_unsol_event+0xa8/0x220 [lpfc] [...] [...] lpfc_complete_unsol_iocb+0xb8/0x138 [lpfc] [...] [...] lpfc_sli4_handle_received_buffer+0x6a0/0xec0 [lpfc] [...] [...] lpfc_sli_handle_slow_ring_event_s4+0x1c4/0x240 [lpfc] [...] [...] lpfc_sli_handle_slow_ring_event+0x24/0x40 [lpfc] [...] [...] lpfc_do_work+0xd88/0x1970 [lpfc] [...] [...] kthread+0x108/0x130 [...] [...] ret_from_kernel_thread+0x5c/0xbc <...> Cc: stable@vger.kernel.org # v4.8 Fixes: 22466da5 ("lpfc: Fix possible NULL pointer dereference") Reported-by: NHarsha Thyagaraja <hathyaga@in.ibm.com> Signed-off-by: NMauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 09 11月, 2016 2 次提交
-
-
由 James Smart 提交于
Correct panics with eh_timeout and eh_deadline We were having double completions on our SLI-3 version of adapters. Solved by clearing our command pointer before calling scsi_done. The eh paths potentially ran simulatenously and would see the non-null value and invoke scsi_done again. Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Set driver environment data on adapter Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 27 9月, 2016 1 次提交
-
-
由 Baoyou Xie 提交于
We get a few warnings when building kernel with W=1: drivers/scsi/lpfc/lpfc_sli.c:5693:1: warning: no previous prototype for 'lpfc_set_features' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_sli.c:8972:1: warning: no previous prototype for 'lpfc_sli_calc_ring' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4621:1: warning: no previous prototype for 'lpfc_rdp_res_link_service' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4633:1: warning: no previous prototype for 'lpfc_rdp_res_sfp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4698:1: warning: no previous prototype for 'lpfc_rdp_res_link_error' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4727:1: warning: no previous prototype for 'lpfc_rdp_res_bbc_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4752:1: warning: no previous prototype for 'lpfc_rdp_res_oed_temp_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4780:1: warning: no previous prototype for 'lpfc_rdp_res_oed_voltage_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4809:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txbias_desc' [-Wmissing-prototypes] drivers/scsi/lpfc/lpfc_els.c:4838:1: warning: no previous prototype for 'lpfc_rdp_res_oed_txpower_desc' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 02 8月, 2016 1 次提交
-
-
由 Johannes Thumshirn 提交于
Check for the existence of piocb->vport before accessing it. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Acked-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 21 7月, 2016 1 次提交
-
-
由 Johannes Thumshirn 提交于
Call lpfc_sli_validate_fcp_iocb() with the hbalock held, as the pointer to iocbq is not guaranteed to still be valid after looking it up. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NLaurence Oberman <loberman@redhat.com> Acked-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 16 7月, 2016 5 次提交
-
-
由 James Smart 提交于
Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Add support for XLane LUN priority Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Fix SLI mode 2 config failure Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Add MDS Diagnostics Support Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Add recovery from adapter parity errors on some SLI4 adapters Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NJames Smart <james.smart@broadcom.com> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 26 4月, 2016 1 次提交
-
-
由 Sebastian Herbszt 提交于
Remove incorrect lockdep assertion from lpfc_sli_hbqbuf_find() which acquires the hbalock itself. Fix the comment which resulted in this mistake. Fixes: 1c2ba475 ("lpfc: Add lockdep assertions") Signed-off-by: NSebastian Herbszt <herbszt@gmx.de> Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 12 4月, 2016 3 次提交
-
-
由 James Smart 提交于
Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Pass cmd iu payloads inline to adapter job structure rather than as separate dma buffers. Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
After a link bounce, when a remote port issues a LOGO while a REGLOGIN is pending on that port, the driver does not clean up the ndlp structure. May result in stack traces in the console log. Fix: Clear the NLP_REG_LOGIN_SEND flag on the ndlp in the routine Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 24 2月, 2016 1 次提交
-
-
由 Johannes Thumshirn 提交于
Several functions in lpfc have comments stating that the function must be called with the hbalock (or hostlock, or ringlock) held. Add lockdep_assert_held() annotations to these functions, so one can actually verify the locks are held. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Acked-by: NDick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 22 12月, 2015 2 次提交
-
-
由 James Smart 提交于
Fix external loopback failure. Rx sequence reassembly was incorrect. Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
由 James Smart 提交于
Fix FCF Infinite loop in lpfc_sli4_fcf_rr_next_index_get. Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinicke <hare@suse.de> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
-
- 27 10月, 2015 2 次提交
-
-
由 Sebastian Herbszt 提交于
Remove set but not used variables. Signed-off-by: NSebastian Herbszt <herbszt@gmx.de> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 Nicholas Krause 提交于
lpfc:Make the function lpfc_sli4_mbox_completions_pending static in order to comply with function prototype This makes the function lpfc_sli4_mbox_completion's definition static now in order to comply with its prototype being also declared as static too. Signed-off-by: NNicholas Krause <xerofoify@gmail.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NSebastian Herbszt <herbszt@gmx.de> Reviewed-by: NHannes Reinecke <hare@suse.com> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 13 6月, 2015 2 次提交
-
-
由 James Smart 提交于
The domain controller PLOGI's concurrent with prior LOGO's/unreg_rpi's completing created a race condition where driver rpi ref count can inadvertantly hit 0 and the rpi attempted to be freed. This error sometimes resulted in Warning messages indicating kref.h via lfpc_nlp_get+0x128. Correct by dropping any new PLOGI until the prior nport state has settled. Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 James Smart 提交于
With blk-mq support in the mid-layer, lpfc can do IO steering based on the information in the request tag. This patch allows lpfc to use blk-mq if enabled. If not enabled, we fall back into the emulex-internal affinity mappings. This feature can be turned on via CONFIG_SCSI_MQ_DEFAULT or passing scsi_mod.use_blk_mq=Y as a parameter to the kernel. Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 06 6月, 2015 1 次提交
-
-
由 James Smart 提交于
Signed-off-by: NDick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: NJames Smart <james.smart@avagotech.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
- 10 4月, 2015 2 次提交
-
-
由 James Smart 提交于
Update copyright to 2015 Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-
由 James Smart 提交于
Signed-off-by: NDick Kennedy <dick.kennedy@emulex.com> Signed-off-by: NJames Smart <james.smart@emulex.com> Reviewed-by: NHannes Reinecke <hare@suse.de> Signed-off-by: NJames Bottomley <JBottomley@Odin.com>
-