An alias entry in the ACPI table means that the device can send requests to the
IOMMU with both device ids, its own and the alias. This is not handled properly
in the ACPI init code. This patch fixes the issue.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Now that enable_iommus() will call iommu_disable() for each iommu,
the call to disable_iommus() during resume is redundant.  Also, the order
for an invalidation is to invalidate device table entries first, then
domain translations.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

These registers may contain values from previous kernels. So reset them
to known values before enable the event buffer again.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The IOMMU spec states that IOMMU behavior may be undefined when the
IOMMU registers are rewritten while command or event buffer is enabled.
Disable them in IOMMU disable path.
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

When kexec'ing to a new kernel (for example, when crashing and launching
a kdump session), the AMD IOMMU may have cached translations.  The kexec'd
kernel, during initialization, will invalidate the IOMMU device table
entries, but not the domain translations.  These stale entries can cause
a device's DMA to fail, makes it rough to write a dump to disk when the
disk controller can't DMA ;-)
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

If the IOMMUs are still enabled when the kexec kernel boots access to
the disk is not possible. This is bad for tools like kdump or anything
else which wants to use PCI devices.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

When the IOMMU stays enabled the BIOS may not be able to finish the
machine shutdown properly. So disable the hardware on shutdown.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Merge branch 'amd-iommu/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu

That prefix is already included in the DUMP_printk macro. So there is no
need to repeat it in the format string.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This fixes a bug with a device that could not be assigned to a KVM guest
because it is still assigned to a dma_ops protection domain.

[chrisw: simply remove WARN_ON(), will always fire since dev->driver
will be pci-sub]
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Handling this event causes device assignment in KVM to fail because the
device gets re-attached as soon as the pci-stub registers as the driver
for the device.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch makes the driver_filter function more readable by
reorganizing the code. The removal of a code code block to an upper
indentation level makes hard-to-read line-wraps unnecessary.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

There is no need to disable/enable irqs on each loop iteration. Just
disable irqs for the whole time the loop runs.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

The pr_* macros are shorter than the old printk(KERN_ ...) variant.
Change the dma-debug code to use the new macros and save a few
unnecessary line breaks. If lines don't break the source code can also
be grepped more easily.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This patch changes the recent updates to dma-debug to conform with
coding style guidelines of Linux and the -tip tree.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Last patch series introduced some new comment which does not fit the
Kernel comment style guidelines. Fix it with this patch.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

Merge branch 'dma-debug/2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into core/iommu

Merge reason: This branch was on an -rc5 base so pull almost-2.6.30
              to resync with the latest upstream fixes and make sure
              the combination works fine.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Some device drivers map the same physical address multiple times to a
dma address. Without an IOMMU this results in the same dma address being
put into the dma-debug hash multiple times. With a first-fit match in
hash_bucket_find() this function may return the wrong dma_debug_entry.

This can result in false positive warnings. This patch fixes it by
changing the first-fit behavior of hash_bucket_find() into a best-fit
algorithm.
Reported-by: NTorsten Kaiser <just.for.lkml@googlemail.com>
Reported-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Cc: lethal@linux-sh.org
Cc: just.for.lkml@googlemail.com
Cc: hancockrwd@gmail.com
Cc: jens.axboe@oracle.com
Cc: bharrosh@panasas.com
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <20090605104132.GE24836@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current code to set up the GART as an IOMMU enables GART
translations before it removes the aperture from the kernel memory
map, sets the GART PTEs to UC, sets up the guard and scratch
pages, or does a wbinvd().  This leaves the possibility of cache
aliasing open and can cause system crashes.

Re-order the code so as to enable the GART translations only
after all safeguards are in place and the tlb has been flushed.

AMD has tested this patch on both Istanbul systems and 1st
generation Opteron systems with APG enabled and seen no adverse
effects.  Istanbul systems with HT Assist enabled sometimes
see MCE errors due to cache artifacts with the unmodified
code.
Signed-off-by: NMark Langsdorf <mark.langsdorf@amd.com>
Cc: <stable@kernel.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: akpm@linux-foundation.org
Cc: jbarnes@virtuousgeek.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  drm/i915: Remove a bad BUG_ON in the fence management code.

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: ignore EDID with really tiny modes.
  drm: don't associate _DRM_DRIVER maps with a master
  drm/i915: intel_lvds.c fix section mismatch
  drm: Hook up DPMS property handling in drm_crtc.c. Add drm_helper_connector_dpms.
  drm: set permissions on edid file to 0444
  drm: add newlines to text sysfs files
  drm/radeon: fix ring free alignment calculations
  drm: fix irq naming for kms drivers.

While running 20 parallel instances of dd as follows:

  #!/bin/bash
  for i in `seq 1 20`; do
           dd if=/dev/zero of=/export/hda3/dd_$i bs=1073741824 count=1 &
  done
  wait

on a 16G machine, we noticed that rather than just killing the processes,
the entire kernel went down.  Stracing dd reveals that it first does an
mmap2, which makes 1GB worth of zero page mappings.  Then it performs a
read on those pages from /dev/zero, and finally it performs a write.

The machine died during the reads.  Looking at the code, it was noticed
that /dev/zero's read operation had been changed by
557ed1fa ("remove ZERO_PAGE") from giving
zero page mappings to actually zeroing the page.

The zeroing of the pages causes physical pages to be allocated to the
process.  But, when the process exhausts all the memory that it can, the
kernel cannot kill it, as it is still in the kernel mode allocating more
memory.  Consequently, the kernel eventually crashes.

To fix this, I propose that when a fatal signal is pending during
/dev/zero read operation, we simply return and let the user process die.
Signed-off-by: NSalman Qazi <sqazi@google.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
[ Modified error return and comment trivially.  - Linus]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't set up the canary; let's disable stack protector on boot.c so
we can get into lguest_init, then set it up.  As a side effect,
switch_to_new_gdt() sets up %fs for us properly too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This could be triggered by a gtt mapping fault on 965 that decides to
remove the fence from another object that happens to be active currently.
Since the other object doesn't rely on the fence reg for its execution, we
don't wait for it to finish.  We'll soon be not waiting on 915 most of the
time as well, so just drop the BUG_ON.
Signed-off-by: NEric Anholt <eric@anholt.net>

Some EDIDs lie and report tiny modes that aren't possible. Ignore
these modes.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A driver will use the _DRM_DRIVER map flag to indicate that it wants
to be responsible for removing the map itself, bypassing the DRM's
automagic cleanup code.

Since the multi-master changes this has been broken, resulting in some
drivers having their registers unmapped before it's finished with them.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

intel_no_lvds[] does not require __initdata as it is used only by

void intel_lvds_init(struct drm_device *dev).
Signed-off-by: NJaswinder Singh Rajput <jaswinder@kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Making the drm_crtc.c code recognize the DPMS property and invoke the
connector->dpms function doesn't remove any capability from the driver while
reducing code duplication.

That just highlighted the problem with the existing DPMS functions which
could turn off the connector, but failed to turn off any relevant crtcs. The
new drm_helper_connector_dpms function manages all of that, using the
drm_helper-specific crtc and encoder dpms functions, automatically computing
the appropriate DPMS level for each object in the system.

This fixes the current troubles in the i915 driver which left PLLs, pipes
and planes running while in DPMS_OFF mode or even while they were unused.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Without initializing the sysfs attributes for the edid file,
it was created with mode 0, making it difficult for applications to use.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The contents of various simple text files in sysfs should end with
a newline to make them easier to read from the console.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

fd.o bz#21849

We were aligning to +16 dwords, instead of to the next 16dword
boundary in the ring. Fix the calculation to go to the next 16dword
boundary when space checking.
Signed-off-by: NDave Airlie <airlied@redhat.com>

allocating devname in the i915 driver was a hack originally and I
forgot to figure out how to do this properly back then.

So this is the cleaner version that just picks devname or driver name
in the irq code.

It removes the devname allocs from the i915 driver.
Signed-off-by: NDave Airlie <airlied@redhat.com>

In alloc_coherent there is an omitted unlock on the path where mapping
fails. Add the unlock.

[ Impact: fix lock imbalance in alloc_coherent ]
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pmac: Update PowerMac 32-bit defconfig

Ideally we should have a directory of drivers and a link to the 'active'
driver. For now just show the first device which is effectively the existing
semantics without a warning.

This is an update on the original buggy patch that I then forgot to
resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels
fixed and submitted by Intel ...

Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This matches Bartlomiej's patch for ide_pci_generic:
c339dfdd

In the libata case netcell has its own mini driver. I suspect this fix is
actually only needed for some firmware revs but it does no harm either way.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup
  e1000: add missing length check to e1000 receive routine
  forcedeth: add phy_power_down parameter, leave phy powered up by default (v2)
  Bluetooth: Remove useless flush_work() causing lockdep warnings