1. 12 12月, 2008 4 次提交
  2. 11 12月, 2008 12 次提交
  3. 10 12月, 2008 13 次提交
  4. 09 12月, 2008 4 次提交
  5. 08 12月, 2008 7 次提交
    • G
      dccp ccid-2: Phase out the use of boolean Ack Vector sysctl · 6fdd34d4
      Gerrit Renker 提交于
      This removes the use of the sysctl and the minisock variable for the Send Ack
      Vector feature, as it now is handled fully dynamically via feature negotiation
      (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per
       RFC 4341, 4.).
      
      Using a sysctl in parallel to this implementation would open the door to
      crashes, since much of the code relies on tests of the boolean minisock /
      sysctl variable. Thus, this patch replaces all tests of type
      
      	if (dccp_msk(sk)->dccpms_send_ack_vector)
      		/* ... */
      with
      	if (dp->dccps_hc_rx_ackvec != NULL)
      		/* ... */
      
      The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature
      negotiation concluded that Ack Vectors are to be used on the half-connection.
      Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child),
      so that the test is a valid one.
      
      The activation handler for Ack Vectors is called as soon as the feature
      negotiation has concluded at the
       * server when the Ack marking the transition RESPOND => OPEN arrives;
       * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN.
      
      Adding the sequence number of the Response packet to the Ack Vector has been
      removed, since
       (a) connection establishment implies that the Response has been received;
       (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e.
           this entry will always be ignored;
       (c) it can not be used for anything useful - to detect loss for instance, only
           packets received after the loss can serve as pseudo-dupacks.
      
      There was a FIXME to change the error code when dccp_ackvec_add() fails.
      I removed this after finding out that:
       * the check whether ackno < ISN is already made earlier,
       * this Response is likely the 1st packet with an Ackno that the client gets,
       * so when dccp_ackvec_add() fails, the reason is likely not a packet error.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6fdd34d4
    • G
      dccp: Remove manual influence on NDP Count feature · 4098dce5
      Gerrit Renker 提交于
      Updating the NDP count feature is handled automatically now:
       * for CCID-2 it is disabled, since the code does not use NDP counts;
       * for CCID-3 it is enabled, as NDP counts are used to determine loss lengths.
      
      Allowing the user to change NDP values leads to unpredictable and failing
      behaviour, since it is then possible to disable NDP counts even when they
      are needed (e.g. in CCID-3).
      
      This means that only those user settings are sensible that agree with the
      values for Send NDP Count implied by the choice of CCID. But those settings
      are already activated by the feature negotiation (CCID dependency tracking),
      hence this form of support is redundant.
      
      At startup the initialisation of the NDP count feature uses the default
      value of 0, which is done implicitly by the zeroing-out of the socket when
      it is allocated. If the choice of CCID or feature negotiation enables NDP
      count, this will then be updated via the NDP activation handler.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4098dce5
    • G
      dccp: Remove obsolete parts of the old CCID interface · 0049bab5
      Gerrit Renker 提交于
      The TX/RX CCIDs of the minisock are now redundant: similar to the Ack Vector
      case, their value equals initially that of the sysctl, but at the end of
      feature negotiation may be something different.
      
      The old interface removed by this patch thus has been replaced by the newer
      interface to dynamically query the currently loaded CCIDs.
      
      Also removed are the constructors for the TX CCID and the RX CCID, since the
      switch "rx <-> non-rx" is done by the handler in minisocks.c (and the handler
      is the only place in the code where CCIDs are loaded).
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0049bab5
    • G
      dccp: Clean up old feature-negotiation infrastructure · 63b8e286
      Gerrit Renker 提交于
      The code removed by this patch is no longer referenced or used, the added
      lines update documentation and copyrights.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      63b8e286
    • G
      dccp: Integration of dynamic feature activation - part 3 (client side) · 991d927c
      Gerrit Renker 提交于
      This integrates feature-activation in the client:
      
       1. When dccp_parse_options() fails, the reset code is already set; request_sent\
          _state_process() currently overrides this with `Packet Error', which is not
          intended - changed to use the reset code supplied by dccp_parse_options().
      
       2. When feature negotiation fails, the socket should be marked as not usable,
          so that the application is notified that an error occurred. This is achieved
          by a new label 'unable_to_proceed': generating an error code of `Aborted',
          setting the socket state to CLOSED, returning with ECOMM in sk_err.
      
       3. Avoids parsing the Ack twice in Respond state by not doing option processing
          again in dccp_rcv_respond_partopen_state_process (as option processing has
          already been done on the request_sock in dccp_check_req).
      
      Since this addresses congestion-control initialisation, a corresponding
      FIXME has been removed.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      991d927c
    • G
      dccp: Integration of dynamic feature activation - part 2 (server side) · 192b27ff
      Gerrit Renker 提交于
      This patch integrates the activation of features at the end of negotiation
      into the server-side code.
      
      Note regarding the removal of 'const':
      --------------------------------------
       The 'const' attribute has been removed from 'dreq' since dccp_activate_values()
       needs to operate on dreq's feature list. Part of the activation is to remove
       those options from the list that have already been confirmed, hence it is not
       purely read-only.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      192b27ff
    • G
      dccp: Integration of dynamic feature activation - part 1 (socket setup) · 6eb55d17
      Gerrit Renker 提交于
      This first patch out of three replaces the hardcoded default settings with
      initialisation code for the dynamic feature negotiation.
      
      The patch also ensures that the client feature-negotiation queue is flushed
      only when entering the OPEN state.
      
      Since confirmed Change options are removed as soon as they are confirmed
      (in the DCCP-Response), this ensures that Confirm options are retransmitted.
      
      Note on retransmitting Confirm options:
      ---------------------------------------
      Implementation experience showed that it is necessary to retransmit Confirm
      options. Thanks to Leandro Melo de Sales who reported a bug in an earlier
      revision of the patch set, resulting from not retransmitting these options.
      
      As long as the client is in PARTOPEN, it needs to retransmit the Confirm
      options for the Change options received on the DCCP-Response from the server.
      
      Otherwise, if the packet containing the Confirm options gets dropped in the
      network, the connection aborts due to undefined feature negotiation state.
      Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
      Acked-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6eb55d17