- 19 8月, 2012 18 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When cpuc->n_events is zero, we actually don't do anything and we just write the cpuc->pcr[0] value as-is without any modifications. The "pcr = 0;" assignment there was just useless and confusing. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Make the per-cpu pcr save area an array instead of one u64. Describe how many PCR and PIC registers the chip has in the sparc_pmu descriptor. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Now specified in sparc_pmu descriptor. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Starting with SPARC-T4 we have a seperate PCR control register for each performance counter, and there are absolutely no restrictions on what events can run on which counters. Add flags that we can use to elide the conflict and dependency logic used to handle older chips. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This is enough to get the NMIs working, more work is needed for perf events. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We assumed PCR_PIC_PRIV can always be used to disable it, but that won't be true for SPARC-T4. This allows us also to get rid of some messy defines used in only one location. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
And, like for the PCR, allow indexing of different PIC register numbers. This also removes all of the non-__KERNEL__ bits from asm/perfctr.h, nothing kernel side should include it any more. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
SPARC-T4 and later have multiple PCR registers, one for each PIC counter. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Unlike for previous chips, access to the perf-counter control registers are all hyper-privileged. Therefore, access to them must go through a hypervisor interface. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Compare and branch, pause, and the various new cryptographic opcodes. We advertise the crypto opcodes to userspace using one hwcap bit, HWCAP_SPARC_CRYPTO. This essentially indicates that the %cfr register can be interrograted and used to determine exactly which crypto opcodes are available on the current cpu. We use the %cfr register to report all of the crypto opcodes available in the bootup CPU caps log message, and via /proc/cpuinfo. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "The largest thing in this set of changes is bringing back some of the ARMv3 code to fix a compile problem noticed on RiscPC, which we still support, even though we only support ARMv4 there. (The reason is that the system bus doesn't support ARMv4 half-word accesses, so we need the ARMv3 library code for this platform.) The rest are all quite minor fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7490/1: Drop duplicate select for GENERIC_IRQ_PROBE ARM: Bring back ARMv3 IO and user access code ARM: 7489/1: errata: fix workaround for erratum #720789 on UP systems ARM: 7488/1: mm: use 5 bits for swapfile type encoding ARM: 7487/1: mm: avoid setting nG bit for user mappings that aren't present ARM: 7486/1: sched_clock: update epoch_cyc on resume ARM: 7484/1: Don't enable GENERIC_LOCKBREAK with ticket spinlocks ARM: 7483/1: vfp: only advertise VFPv4 in hwcaps if CONFIG_VFPv3 is enabled ARM: 7482/1: topology: fix section mismatch warning for init_cpu_topology
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael J. Wysocki: - Fixes for three obscure problems in the runtime PM core code found recently. - Two fixes for the new "coupled" cpuidle code from Colin Cross and Jon Medhurst. - intel_idle driver fix from Konrad Rzeszutek Wilk. * tag 'pm-for-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Check cpu_idle_get_driver() for NULL before dereferencing it. cpuidle: Prevent null pointer dereference in cpuidle_coupled_cpu_notify cpuidle: coupled: fix sleeping while atomic in cpu notifier PM / Runtime: Check device PM QoS setting before "no callbacks" check PM / Runtime: Clear power.deferred_resume on success in rpm_suspend() PM / Runtime: Fix rpm_resume() return value for power.no_callbacks set
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs由 Linus Torvalds 提交于
Pull vfs fixes from Miklos Szeredi. This mainly fixes some confusion about whether the open 'mode' variable passed around should contain the full file type (S_IFREG etc) information or just the permission mode. In particular, the lack of proper file type information had confused fuse. * 'vfs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: vfs: fix propagation of atomic_open create error on negative dentry fuse: check create mode in atomic open vfs: pass right create mode to may_o_create() vfs: atomic_open(): fix create mode usage vfs: canonicalize create mode in build_open_flags()
-
- 18 8月, 2012 16 次提交
-
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md fixes from NeilBrown: "2 fixes for md, tagged for -stable" * tag 'md-3.6-fixes' of git://neil.brown.name/md: md/raid10: fix problem with on-stack allocation of r10bio structure. md: Don't truncate size at 4TB for RAID0 and Linear
-
由 NeilBrown 提交于
A 'struct r10bio' has an array of per-copy information at the end. This array is declared with size [0] and r10bio_pool_alloc allocates enough extra space to store the per-copy information depending on the number of copies needed. So declaring a 'struct r10bio on the stack isn't going to work. It won't allocate enough space, and memory corruption will ensue. So in the two places where this is done, declare a sufficiently large structure and use that instead. The two call-sites of this bug were introduced in 3.4 and 3.5 so this is suitable for both those kernels. The patch will have to be modified for 3.4 as it only has one bug. Cc: stable@vger.kernel.org Reported-by: NIvan Vasilyev <ivan.vasilyev@gmail.com> Tested-by: NIvan Vasilyev <ivan.vasilyev@gmail.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband/rdma fixes from Roland Dreier: "Grab bag of InfiniBand/RDMA fixes: - IPoIB fixes for regressions introduced by path database conversion - mlx4 fixes for bugs with large memory systems and regressions from SR-IOV patches - RDMA CM fix for passing bad event up to userspace - Other minor fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check iboe netdev pointer before dereferencing it mlx4_core: Clean up buddy bitmap allocation mlx4_core: Fix integer overflow issues around MTT table mlx4_core: Allow large mlx4_buddy bitmaps IB/srp: Fix a race condition IB/qib: Fix error return code in qib_init_7322_variables() IB: Fix typos in infiniband drivers IB/ipoib: Fix RCU pointer dereference of wrong object IB/ipoib: Add missing locking when CM object is deleted RDMA/ucma.c: Fix for events with wrong context on iWARP RDMA/ocrdma: Don't call vlan_dev_real_dev() for non-VLAN netdevs IB/mlx4: Fix possible deadlock on sm_lock spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY fixes from Greg Kroah-Hartman: "Here are 4 tiny patches, each fixing a serial driver problem that people have reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pmac_zilog,kdb: Fix console poll hook to return instead of loop serial: mxs-auart: fix the wrong RTS hardware flow control serial: ifx6x60: fix paging fault on spi_register_driver serial: Change Kconfig entry for CLPS711X-target
-
由 Konrad Rzeszutek Wilk 提交于
If the machine is booted without any cpu_idle driver set (b/c disable_cpuidle() has been called) we should follow other users of cpu_idle API and check the return value for NULL before using it. Reported-and-tested-by: NMark van Dijk <mark@internecto.net> Suggested-by: NJan Beulich <JBeulich@suse.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Jon Medhurst (Tixy) 提交于
When a kernel is built to support multiple hardware types it's possible that CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is set but the hardware the kernel is run on doesn't support cpuidle and therefore doesn't load a driver for it. In this case, when the system is shut down, cpuidle_coupled_cpu_notify() gets called with cpuidle_devices set to NULL. There are quite possibly other circumstances where this situation can also occur and we should check for it. Signed-off-by: NJon Medhurst <tixy@linaro.org> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Colin Cross 提交于
The cpu hotplug notifier gets called in both atomic and non-atomic contexts, it is not always safe to lock a mutex. Filter out all events except the six necessary ones, which are all sleepable, before taking the mutex. Signed-off-by: NColin Cross <ccross@android.com> Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Rafael J. Wysocki 提交于
If __dev_pm_qos_read_value(dev) returns a negative value, rpm_suspend() should return -EPERM for dev even if its power.no_callbacks flag is set. For this to happen, the device's power.no_callbacks flag has to be checked after the PM QoS check, so move the PM QoS check to rpm_check_suspend_allowed() (this will make it cover idle notifications as well as runtime suspend too). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
-
由 Rafael J. Wysocki 提交于
The power.deferred_resume can only be set if the runtime PM status of device is RPM_SUSPENDING and it should be cleared after its status has been changed, regardless of whether or not the runtime suspend has been successful. However, it only is cleared on suspend failure, while it may remain set on successful suspend and is happily leaked to rpm_resume() executed in that case. That shouldn't happen, so if power.deferred_resume is set in rpm_suspend() after the status has been changed to RPM_SUSPENDED, clear it before calling rpm_resume(). Then, it doesn't need to be cleared before changing the status to RPM_SUSPENDING any more, because it's always cleared after the status has been changed to either RPM_SUSPENDED (on success) or RPM_ACTIVE (on failure). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
-
由 Rafael J. Wysocki 提交于
For devices whose power.no_callbacks flag is set, rpm_resume() should return 1 if the device's parent is already active, so that the callers of pm_runtime_get() don't think that they have to wait for the device to resume (asynchronously) in that case (the core won't queue up an asynchronous resume in that case, so there's nothing to wait for anyway). Modify the code accordingly (and make sure that an idle notification will be queued up on success, even if 1 is to be returned). Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging fixes from Greg Kroah-Hartman: "Here are some staging driver fixes (and iio driver fixes, they get lumped in with the staging stuff due to dependancies) for your 3.6-rc3 tree. Nothing major, just a bunch of fixes that people have reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (26 commits) iio: lm3533-als: Fix build warnings staging:iio:ad7780: Mark channels as unsigned staging:iio:ad7192: Report offset and scale for temperature channel staging:iio:ad7192: Report channel offset staging:iio:ad7192: Mark channels as unsigned staging:iio:ad7192: Fix setting ACX staging:iio:ad7192: Add missing break in switch statement staging:iio:ad7793: Fix internal reference value staging:iio:ad7793: Follow new IIO naming spec staging:iio:ad7793: Fix temperature scale and offset staging:iio:ad7793: Report channel offset staging:iio:ad7793: Mark channels as unsigned staging:iio:ad7793: Add missing break in switch statement iio/adjd_s311: Fix potential memory leak in adjd_s311_update_scan_mode() iio: frequency: ADF4350: Fix potential reference div factor overflow. iio: staging: ad7298_ring: Fix maybe-uninitialized warning staging: comedi: usbduxfast: Declare MODULE_FIRMWARE usage staging: comedi: usbdux: Declare MODULE_FIRMWARE usage staging: comedi: usbduxsigma: Declare MODULE_FIRMWARE usage staging: csr: add INET dependancy ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core由 Linus Torvalds 提交于
Pull driver core fixes from Greg Kroah-Hartman: "Here are two tiny patches, one fixing a dynamic debug problem that the printk rework turned up, and the other one fixing an extcon problem that people reported. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: extcon: extcon_gpio: Replace gpio_request_one by devm_gpio_request_one drivers-core: make structured logging play nice with dynamic-debug
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull Char / Misc driver fixes from Greg Kroah-Hartman: "Here are some small misc and w1 driver fixes for 3.6-rc3. Nothing major, just some some bugfixes and a new device id for a w1 driver. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'char-misc-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: 1-Wire: Add support for the maxim ds1825 temperature sensor ti-st: Fix check for pdata->chip_awake function pointer mei: add mei_quirk_probe function mei: fix device stall after wd is stopped
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB patches from Greg Kroah-Hartman: "Here are a number of small USB patches for 3.6-rc3. The "large" one is just a number of device id updates to the option driver, done by the manufacturer, properly fixing up the device ids based on shipping devices. Other than that, some gadget driver fixes, the obligitary XHCI patches, and some other device ids and bugs fixed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: qcserial: fix port handling on Gobi 1K and 2K+ USB: serial: Fix mos7840 timeout USB: option: add ZTE K5006-Z usb: gadget: u_ether: fix kworker 100% CPU issue with still used interfaces in eth_stop usb: host: tegra: fix warning messages in ehci_remove usb: host: mips: sead3: Update for EHCI register structure. usb: renesas_usbhs: fixup resume method for autonomy mode usb: renesas_usbhs: mod_host: add missing .bus_suspend/resume update MAINTAINERS for Oliver Neukum usb: usb_wwan: resume/suspend can be called after port is gone usb: serial: prevent suspend/resume from racing against probe/remove usb: usb_wwan: replace release and disconnect with a port_remove hook usb: serial: mos7840: Fixup mos7840_chars_in_buffer() USB: isp1362-hcd.c: usb message always saved in case of underrun OMAP: USB : Fix the EHCI enumeration and core retention issue usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module USB: support the new interfaces of Huawei Data Card devices in option driver USB: ftdi_sio: Add VID/PID for Kondo Serial USB xhci: Switch PPT ports to EHCI on shutdown. xhci: Fix bug after deq ptr set to link TRB. ...
-
由 Randy Dunlap 提交于
Fix fatal error in scripts/kernel-doc by ignoring the "__weak" attribute: Error(drivers/pci/pci.c:2820): cannot understand prototype: 'char * __weak pcibios_setup(char *str) ' Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull a Yama bugfix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: Yama: access task_struct->comm directly
-
- 17 8月, 2012 6 次提交
-
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull C6X atomic64 support from Mark Salter: "Enable atomic64 ops in C6X - define L1_CACHE_SHIFT - select GENERIC_ATOMIC64" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: select GENERIC_ATOMIC64 C6X: add Lx_CACHE_SHIFT defines
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 bug fixes from Ted Ts'o: "The following are all bug fixes and regressions. The most notable are the ones which cause problems for ext4 on RAID --- a performance problem when mounting very large filesystems, and a kernel OOPS when doing an rm -rf on large directory hierarchies on fast devices." * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix kernel BUG on large-scale rm -rf commands ext4: fix long mount times on very big file systems ext4: don't call ext4_error while block group is locked ext4: avoid kmemcheck complaint from reading uninitialized memory ext4: make sure the journal sb is written in ext4_clear_journal_err()
-
由 Ian Kent 提交于
In some cases when an autofs indirect mount is contained in a file system that is marked as shared (such as when systemd does the equivalent of "mount --make-rshared /" early in the boot), mounts stop expiring. When this happens the first expiry check on a mountpoint dentry in autofs_expire_indirect() sees a mountpoint dentry with a higher than minimal reference count. Consequently the dentry is condidered busy and the actual expiry check is never done. This particular check was originally meant as an optimisation to detect a path walk in progress but with the addition of rcu-walk it can be ineffective anyway. Removing the test allows automounts to expire again since the actual expire check doesn't rely on the dentry reference count. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Theodore Ts'o 提交于
Commit 968dee77: "ext4: fix hole punch failure when depth is greater than 0" introduced a regression in v3.5.1/v3.6-rc1 which caused kernel crashes when users ran run "rm -rf" on large directory hierarchy on ext4 filesystems on RAID devices: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 Process rm (pid: 18229, threadinfo ffff8801276bc000, task ffff880123631710) Call Trace: [<ffffffff81236483>] ? __ext4_handle_dirty_metadata+0x83/0x110 [<ffffffff812353d3>] ext4_ext_truncate+0x193/0x1d0 [<ffffffff8120a8cf>] ? ext4_mark_inode_dirty+0x7f/0x1f0 [<ffffffff81207e05>] ext4_truncate+0xf5/0x100 [<ffffffff8120cd51>] ext4_evict_inode+0x461/0x490 [<ffffffff811a1312>] evict+0xa2/0x1a0 [<ffffffff811a1513>] iput+0x103/0x1f0 [<ffffffff81196d84>] do_unlinkat+0x154/0x1c0 [<ffffffff8118cc3a>] ? sys_newfstatat+0x2a/0x40 [<ffffffff81197b0b>] sys_unlinkat+0x1b/0x50 [<ffffffff816135e9>] system_call_fastpath+0x16/0x1b Code: 8b 4d 20 0f b7 41 02 48 8d 04 40 48 8d 04 81 49 89 45 18 0f b7 49 02 48 83 c1 01 49 89 4d 00 e9 ae f8 ff ff 0f 1f 00 49 8b 45 28 <48> 8b 40 28 49 89 45 20 e9 85 f8 ff ff 0f 1f 80 00 00 00 RIP [<ffffffff81233164>] ext4_ext_remove_space+0xa34/0xdf0 This could be reproduced as follows: The problem in commit 968dee77 was that caused the variable 'i' to be left uninitialized if the truncate required more space than was available in the journal. This resulted in the function ext4_ext_truncate_extend_restart() returning -EAGAIN, which caused ext4_ext_remove_space() to restart the truncate operation after starting a new jbd2 handle. Reported-by: NMaciej Żenczykowski <maze@google.com> Reported-by: NMarti Raudsepp <marti@juffo.org> Tested-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
Commit 8aeb00ff85a: "ext4: fix overhead calculation used by ext4_statfs()" introduced a O(n**2) calculation which makes very large file systems take forever to mount. Fix this with an optimization for non-bigalloc file systems. (For bigalloc file systems the overhead needs to be set in the the superblock.) Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-
由 Theodore Ts'o 提交于
While in ext4_validate_block_bitmap(), if an block allocation bitmap is found to be invalid, we call ext4_error() while the block group is still locked. This causes ext4_commit_super() to call a function which might sleep while in an atomic context. There's no need to keep the block group locked at this point, so hoist the ext4_error() call up to ext4_validate_block_bitmap() and release the block group spinlock before calling ext4_error(). The reported stack trace can be found at: http://article.gmane.org/gmane.comp.file-systems.ext4/33731Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
-