A new xfsqa test (226) with a prototype xfs_fsr change to try to
handle dynamic fork offsets better triggers an assertion failure
where the inode data fork is in btree format, yet there is room in
the inode for it to be in extent format. The two inodes look like:

before: ino 0x101 (target), num_extents 11, Max in-fork extents 6, broot size 40, fork offset 96
before: ino 0x115 (temp),  num_extents 5, Max in-fork extents 3, broot size 40, fork offset 56
after: ino 0x101 (target), num_extents 5, Max in-fork extents 6, broot size 40, fork offset 96
after: ino 0x115 (temp), num_extents 11, Max in-fork extents 3, broot size 40, fork offset 56

Basically the target inode ends up with 5 extents in btree format,
but it had space for 6 extents in extent format, so ends up
incorrect. Notably here the broot size is the same, and that is
where the kernel code is going wrong - the btree root will fit, so
it lets the swap go ahead.

The check should not allow the swap to take place if the number of
extents while in btree format is less than the number of extents
that can fit in the inode in extent format. Adding that check will
prevent this swap and corruption from occurring.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Any inode reclaim flush that returns EAGAIN will result in the inode
reclaim being attempted again later. There is no need to issue a
warning into the logs about this situation.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Updates to the VFS layer removed an extra ->sync_fs call into the
filesystem during the sync process (from the quota code).
Unfortunately the sync code was unknowingly relying on this call to
make sure metadata buffers were flushed via a xfs_buftarg_flush()
call to move the tail of the log forward in memory before the final
transactions of the sync process were issued.

As a result, the old code would write a very recent log tail value
to the log by the end of the sync process, and so a subsequent crash
would leave nothing for log recovery to do. Hence in qa test 182,
log recovery only replayed a small handle for inode fsync
transactions in this case.

However, with the removal of the extra ->sync_fs call, the log tail
was now not moved forward with the inode fsync transactions near the
end of the sync procese the first (and only) buftarg flush occurred
after these transactions went to disk. The result is that log
recovery now sees a large number of transactions for metadata that
is already on disk.

This usually isn't a problem, but when the transactions include
inode chunk allocation, the inode create transactions and all
subsequent changes are replayed as we cannt rely on what is on disk
is valid. As a result, if the inode was written and contains
unlogged changes, the unlogged changes are lost, thereby violating
sync semantics.

The fix is to always issue a transaction after the buftarg flush
occurs is the log iѕ not idle or covered. This results in a dummy
transaction being written that contains the up-to-date log tail
value, which will be very recent. Indeed, it will be at least as
recent as the old code would have left on disk, so log recovery
will behave exactly as it used to in this situation.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

If we are doing a forced shutdown, we can get lots of noise about
delalloc pages being discarded. This is happens by design during a
forced shutdown, so don't spam the logs with these messages.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Re-apply a commit that had been reverted due to regressions
that have since been fixed.

    From 95f8e302 Mon Sep 17 00:00:00 2001
    From: Nick Piggin <npiggin@suse.de>
    Date: Tue, 6 Jan 2009 14:43:09 +1100

    Implement XFS's large buffer support with the new vmap APIs. See the vmap
    rewrite (db64fe02) for some numbers. The biggest improvement that comes from
    using the new APIs is avoiding the global KVA allocation lock on every call.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

Only modifications here were a minor reformat, plus making the patch
apply given the new use of xfs_buf_is_vmapped().
Modified-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Re-apply a commit that had been reverted due to regressions
that have since been fixed.

    Original commit: d2859751
    Author: Nick Piggin <npiggin@suse.de>
    Date: Tue, 6 Jan 2009 14:40:44 +1100

    XFS's vmap batching simply defers a number (up to 64) of vunmaps,
    and keeps track of them in a list. To purge the batch, it just goes
    through the list and calls vunamp on each one. This is pretty poor:
    a global TLB flush is generally still performed on each vunmap, with
    the most expensive parts of the operation being the broadcast IPIs
    and locking involved in the SMP callouts, and the locking involved
    in the vmap management -- none of these are avoided by just batching
    up the calls. I'm actually surprised it ever made much difference.
    (Now that the lazy vmap allocator is upstream, this description is
    not quite right, but the vunmap batching still doesn't seem to do
    much).

    Rip all this logic out of XFS completely. I will improve vmap
    performance and scalability directly in subsequent patch.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Reviewed-by: NChristoph Hellwig <hch@infradead.org>
Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>

The only change I made was to use the "new" xfs_buf_is_vmapped()
function in a place it had been open-coded in the original.
Modified-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This gives the filesystem more information about the writeback that
is happening.  Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Similar to the fsync issue fixed a while ago in commit
2daea67e we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path.  Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.

Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

So that fsr can attempt to get the fork offset of the temporary
inode it uses the same as the inode it is defragmenting, pass the
fork offset out in the bulkstat information.

The bulkstat structure has padding that has always been zeroed, so
userspace can tell if this field is set or not by use of the xattr
present flag and a non-zero value for the fork offset.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The current default size of the reserved blocks pool is easy to deplete
with certain workloads, in particular workloads that do lots of concurrent
delayed allocation extent conversions.  If enough transactions are running
in parallel and the entire pool is consumed then subsequent calls to
xfs_trans_reserve() will fail with ENOSPC.  Also add a rate limited
warning so we know if this starts happening again.

This is an updated version of an old patch from Lachlan McIlroy.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We currently use block_invalidatepage() to clean up pages where I/O
fails in ->writepage(). Unfortunately, if the page has delalloc
regions on it, we fail to remove the delalloc regions when we
invalidate the page.  This can result in tripping a BUG() in
xfs_get_blocks() later on if a direct IO read is done on that same
region - the delalloc extent is returned when none is supposed to be
there.

Fix this by truncating away the delalloc regions on the page before
invalidating it. Because they are delalloc, we can do this without
needing a transaction. Indeed - if we get ENOSPC errors, we have to
be able to do this truncation without a transaction as there is
no space left for block reservation (typically why we see a ENOSPC
in writeback).
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

xfssyncd processes a queue of work by detaching the queue and
then iterating over all the work items. It then sleeps for a
time period or until new work comes in. If new work is queued
while xfssyncd is actively processing the detached work queue,
it will not process that new work until after a sleep timeout
or the next work event queued wakes it.

Fix this by checking the work queue again before going to sleep.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Fix a build warning that slipped through.  Dave Chinner had posted
an updated version of his patch but the previous version--without
this fix--was what got committed.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We already do these checks in the generic code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently Q_XQUOTASYNC calls into the quota_sync method, but XFS does something
entirely different in it than the rest of the filesystems.  xfs_quota which
calls Q_XQUOTASYNC expects an asynchronous data writeout to flush delayed
allocations, while the "VFS" quota support wants to flush changes to the quota
file.

So make Q_XQUOTASYNC call into the writeback code directly and make the
quota_sync method optional as XFS doesn't need in the sense expected by the
rest of the quota code.

GFS2 was using limited XFS-style quota and has a quota_sync method fitting
neither the style used by vfs_quota_sync nor xfs_fs_quota_sync.  I left it
in for now as per discussion with Steve it expects to be called from the
sync path this way.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJan Kara <jack@suse.cz>

The radix-tree code requires it's users to serialize tag updates
against other updates to the tree.  While XFS protects tag updates
against each other it does not serialize them against updates of the
tree contents, which can lead to tag corruption.  Fix the inode
cache to always take pag_ici_lock in exclusive mode when updating
radix tree tags.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NPatrick Schreurs <patrick@news-service.com>
Tested-by: NPatrick Schreurs <patrick@news-service.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Inodes are only pinned/unpinned via the inode item methods, and lots of
code relies on that fact.  So remove the separate xfs_ipin/xfs_iunpin
helpers and merge them into their only callers.  This also fixes up
various duplicate and/or incorrect comments.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Remove the inode item pointer and ili_last_lsn checks in
__xfs_iunpin_wait as any pinned inode is guaranteed to have them
valid.  After this the xfs_iunpin_nowait case is nothing more than a
xfs_log_force_lsn, as we know that the caller has already checked
the pincount.

Make xfs_iunpin_nowait the new low-level routine just doing the log
force and rewrite xfs_iunpin_wait around it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Move the two declarations to better fitting headers now that
xfs_lrw.c is gone.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Most of xfs_trans_bjoin is duplicated in xfs_trans_get_buf,
xfs_trans_getsb and xfs_trans_read_buf.  Add a new _xfs_trans_bjoin
which can be called by all four functions.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currenly we pass opaque xfs_log_ticket_t handles instead of
struct xlog_ticket pointers, and void pointers instead of
struct xlog_in_core pointers to various log manager functions.
Instead pass properly typed pointers after adding forward
declarations for them to xfs_log.h, and adjust the touched
function prototypes to the standard XFS style while at it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Split out the nullfb case into a separate function to reduce the stack
footprint and make the code more readable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Using a static buffer in xfs_fmtfsblock means we can corrupt traces if
multiple CPUs hit this code path at the same.  Just remove xfs_fmtfsblock
for now and print the block number purely numerical.  If we want the
NULLFSBLOCK and NULLSTARTBLOCK formatting back the best way would be
a decoding plugin in the trace-cmd userspace command.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

We need to hold the ilock to check the inode pincount safely.  While
we're at it also remove the check for ip->i_itemp->ili_last_lsn, a
pinned inode always has it set.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The introduction of barriers to loop devices has created a new IO
order completion dependency that XFS does not handle. The loop
device implements barriers using fsync and so turns a log IO in the
XFS filesystem on the loop device into a data IO in the backing
filesystem. That is, the completion of log IOs in the loop
filesystem are now dependent on completion of data IO in the backing
filesystem.

This can cause deadlocks when a flush daemon issues a log force with
an inode locked because the IO completion of IO on the inode is
blocked by the inode lock. This in turn prevents further data IO
completion from occuring on all XFS filesystems on that CPU (due to
the shared nature of the completion queues). This then prevents the
log IO from completing because the log is waiting for data IO
completion as well.

The fix for this new completion order dependency issue is to make
the IO completion inode locking non-blocking. If the inode lock
can't be grabbed, simply requeue the IO completion back to the work
queue so that it can be processed later. This prevents the
completion queue from being blocked and allows data IO completion on
other inodes to proceed, hence avoiding completion order dependent
deadlocks.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Allow us to track the difference between timestamp and size updates
by using mark_inode_dirty from the I/O completion code, and checking
the VFS inode flags in xfs_file_fsync.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currently the fsync file operation is divided into a low-level
routine doing all the work and one that implements the Linux file
operation and does minimal argument wrapping.  This is a leftover
from the days of the vnode operations layer and can be removed to
simplify the code a bit, as well as preparing for the implementation
of an optimized fdatasync which needs to look at the Linux inode
state.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currently the aio_read, aio_write, splice_read and splice_write file
operations are divided into a low-level routine doing all the work
and one that implements the Linux file operations and does minimal
argument wrapping.  This is a leftover from the days of the vnode
operations layer and can be removed to simplify the code a lot.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

Currently the code to implement the file operations is split over
two small files.  Merge the content of xfs_lrw.c into xfs_file.c to
have it in one place.  Note that I haven't done various cleanups
that are possible after this yet, they will follow in the next
patch.  Also the function xfs_dev_is_read_only which was in
xfs_lrw.c before really doesn't fit in here at all and was moved to
xfs_mount.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

The be32_to_cpu in the TP_printk output breaks automatic parsing of
the trace format by the trace-cmd tools, so we have to move it into
the TP_assign block.  While we're at it also fix the format for the
quota limits to more regular and easier parseable.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

While doing some testing of readdir perf a while back,
I noticed that the buffer size we're using internally is
smaller than what glibc gives us by default.  Upping this
size helped a bit, and seems safe.

glibc's __alloc_dir() does:

  const size_t default_allocation = (4 * BUFSIZ < sizeof (struct dirent64)
                                     ? sizeof (struct dirent64) : 4 * BUFSIZ);
  const size_t small_allocation = (BUFSIZ < sizeof (struct dirent64)
                                   ? sizeof (struct dirent64) : BUFSIZ);
  size_t allocation = default_allocation;
#ifdef _STATBUF_ST_BLKSIZE
  if (statp != NULL && default_allocation < statp->st_blksize)
    allocation = statp->st_blksize;
#endif

and

#define _G_BUFSIZ 8192
#define _IO_BUFSIZ _G_BUFSIZ
# define BUFSIZ _IO_BUFSIZ

so the default buffer is 4 * 8192 = 32768
(except in the unlikely case of blocks > 32k....)
Signed-off-by: NEric Sandeen <sandeen@sandeen.net>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

This is the commit_metadata export operation for XFS.

- Takes one inode to be committed.

- Forces the log up to the lsn of the inode.

- Doesn't force the log if the inode doesn't have a pincount.
Signed-off-by: NBen Myers <bpm@sgi.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NDave Chinner <david@fromorbit.com>
[bfields@citi.umich.edu: trivial whitespace fix]
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Add __percpu sparse annotations to fs.

These annotations are to make sparse consider percpu variables to be
in a different address space and warn if accessed without going
through percpu accessors.  This patch doesn't affect normal builds.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alex Elder <aelder@sgi.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>

Test the value that was just allocated rather than the previously tested one.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@

if (x == NULL || ...) {
    ... when forall
    return ...; }
... when != goto l;
    when != x = e
    when != &x
*x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

If we have a pinned inode it must have a log item attached to it.
Usually that log item will have ili_last_lsn already set, in which
case we only need to flush the log up to that LSN instead of doing a
full log force.  This gives speedups of about 5% in some fsync heavy
workloads.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAlex Elder <aelder@sgi.com>

file_remove_suid already calls into ->setattr to clear the suid and
sgid bits if needed, no need to start a second transaction to do it
ourselves.

Note that xfs_write_clear_setuid issues a sync transaction while the
path through ->setattr doesn't, but that is consistant with the
other filesystems.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAlex Elder <aelder@sgi.com>
Signed-off-by: NAlex Elder <aelder@sgi.com>

xfs_buf.c includes what is essentially a hand rolled version of
blk_rq_map_kern().  In order to work properly with the vmalloc buffers
that xfs uses, this hand rolled routine must also implement the flushing
API for vmap/vmalloc areas.

[style updates from hch@lst.de]
Acked-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

There are no more users of this function left in the XFS code
now that we've switched everything to delayed write flushing.
Remove it.
Signed-off-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

When an inode has already be flushed delayed write,
xfs_inode_clean() returns true and hence xfs_fs_write_inode() can
return on a synchronous inode write without having written the
inode. Currently these sycnhronous writes only come sync(1),
unmount, a sycnhronous NFS export and cachefiles so should be
relatively rare and out of common performance paths.

Realistically, a synchronous inode write is not necessary here; we
can avoid writing the inode by logging any non-transactional changes
that are pending.  This needs to be done with synchronous
transactions, but it avoids seeking between the log and inode
clusters as we do now. We don't force the log if the inode is
pinned, though, so this differs from the fsync case.  For normal
sys_sync and unmount behaviour this is fine because we do a
synchronous log force in xfs_sync_data which is called from the
->sync_fs code.

It does however break the NFS synchronous export guarantees for now,
but work is under way to fix this at a higher level or for the
higher level to provide an additional flag in the writeback control
to tell us that a log force is needed.

Portions of this patch are based on work from Dave Chinner.
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NDave Chinner <david@fromorbit.com>
Reviewed-by: NAlex Elder <aelder@sgi.com>