- 24 8月, 2010 15 次提交
-
-
由 Sonny Rao 提交于
Some modules (like eHCA) want to map all of kernel memory, for this to work with a relocated kernel, we need to export kernstart_addr so modules can use PHYSICAL_START and memstart_addr so they could use MEMORY_START. Note that the 32bit code already exports these symbols. Signed-off-By: NSonny Rao <sonnyrao@us.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This makes the 64-bit kernel use 64-bit signed integers for the counter (effectively supporting 32-bit of active count in the semaphore), thus avoiding things like overflow of the mmap_sem if you use a really crazy number of threads Note: Ideally the type in the structure should be atomic_long_t rather than "long". However, there's some nasty issues with that. It needs to be initialized statically -and- lib/rwsem.c does things like sem->count = RWSEM_UNLOCKED_VALUE; Now, if you mix in the fact that atomic_* types are actually structures with one member and note typedefs of a scalar, it makes its really nasty. So I stuck to what we did before using a long and casts for now. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) netfilter: fix CONFIG_COMPAT support isdn/avm: fix build when PCMCIA is not enabled header: fix broken headers for user space e1000e: don't check for alternate MAC addr on parts that don't support it e1000e: disable ASPM L1 on 82573 ll_temac: Fix poll implementation netxen: fix a race in netxen_nic_get_stats() qlnic: fix a race in qlcnic_get_stats() irda: fix a race in irlan_eth_xmit() net: sh_eth: remove unused variable netxen: update version 4.0.74 netxen: fix inconsistent lock state vlan: Match underlying dev carrier on vlan add ibmveth: Fix opps during MTU change on an active device ehea: Fix synchronization between HW and SW send queue bnx2x: Update bnx2x version to 1.52.53-4 bnx2x: Fix PHY locking problem rds: fix a leak of kernel memory netlink: fix compat recvmsg netfilter: fix userspace header warning ...
-
由 Linus Torvalds 提交于
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: hp-wmi: Fix query interface ACPI_TOSHIBA needs LEDS support
-
git://xenbits.xensource.com/people/ianc/linux-2.6由 Linus Torvalds 提交于
* 'for-upstream/pvhvm' of git://xenbits.xensource.com/people/ianc/linux-2.6: xen: pvhvm: make it clearer that XEN_UNPLUG_* define bits in a bitfield xen: pvhvm: rename xen_emul_unplug=ignore to =unnnecessary xen: pvhvm: allow user to request no emulated device unplug
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: setlocalversion: Ignote SCMs above the linux source tree makefile: not need to regenerate kernel.release file when make kernelrelease fixes for using make 3.82 kconfig: fix segfault when detecting recursive dependency kconfig: fix savedefconfig with choice marked optional
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (33 commits) drm/radeon/kms: fix typo in radeon_compute_pll_gain drm/radeon/kms: try to detect tv vs monitor for underscan drm/radeon/kms: fix sideport detection on newer rs880 boards drm/radeon: fix passing wrong type to gem object create. drm/radeon/kms: set encoder type to DVI for HDMI on evergreen drm/radeon/kms: add back missing break in info ioctl drm/radeon/kms: don't enable MSIs on AGP boards drm/radeon/kms: fix agp mode setup on cards that use pcie bridges drm: move dereference below check drm: fix end of loop test drm/radeon/kms: rework radeon_dp_detect() logic drm/radeon/kms: add missing asic callback assignment for evergreen drm/radeon/kms/DCE3+: switch pads to ddc mode when going i2c drm/radeon/kms/pm: bail early if nothing's changing drm/radeon/kms/atom: clean up dig atom handling drm/radeon/kms: DCE3/4 transmitter fixes drm/radeon/kms: rework encoder handling drm/radeon/kms: DCE3/4 AdjustPixelPll updates drm/radeon: Fix stack data leak drm/radeon/kms: fix GTT/VRAM overlapping test ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: wire up new fanotify/prlimit64 syscalls ADI/ASoC: add MAINTAINERS entries Blackfin: fix hweight breakage
-
由 Florian Westphal 提交于
commit f3c5c1bf (netfilter: xtables: make ip_tables reentrant) forgot to also compute the jumpstack size in the compat handlers. Result is that "iptables -I INPUT -j userchain" turns into -j DROP. Reported by Sebastian Roesner on #netfilter, closes http://bugzilla.netfilter.org/show_bug.cgi?id=669. Note: arptables change is compile-tested only. Signed-off-by: NFlorian Westphal <fw@strlen.de> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matthew Garrett 提交于
The machines I have appear to provide their return value in the arguments structure, not the output structure. Rework the driver to use that again in order to get rfkill working again. Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Jonathan Corbet 提交于
Don't ask how ACPI_TOSHIBA got enabled on in desktop system's .config - I don't know. But it has silently been there until I tried 2.6.36-rc2, where it broke the build because I don't have LED support turned on. Attached patch fixes things up. (I had to change BACKLIGHT_CLASS_DEVICE to "depends" because otherwise I get unsightly core dumps out of scripts/kconfig/conf). jon -- toshiba: make sure we pull in LED support The Toshiba extras driver uses the LED module, so make sure we have it configure in. Signed-off-by: NJonathan Corbet <corbet@lwn.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Julia Lawall 提交于
dev_name always dereferences its argument, so it should not be called if the argument is NULL. The function indeed later tests the argument for being NULL. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression dev,E; @@ *dev_name(dev) ... when != dev = E ( *dev == NULL | *dev != NULL ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'misc' of git://git.kernel.dk/linux-2.6-block: ipheth: add support for iPhone 4
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: i.MX ssi: use SSI_STCCR in synchronous mode ALSA: hda - Add support for Lenovo S10-3t ALSA: hda - Fix stream and channel-ids codec-bus wide ALSA: hda - Fix conflict of sticky PCM parameter in HDMI codecs ALSA: intel8x0: Mute External Amplifier by default for ThinkPad X31 ALSA: hda - Fix build error with CONFIG_PROC_FS=n ALSA: hda - Add support for IDT 92HD89XX codecs
-
- 23 8月, 2010 25 次提交
-
-
由 Takashi Iwai 提交于
-
由 Sascha Hauer 提交于
In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Dave Kleikamp 提交于
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
The interrupt stacks need to be indexed by the physical cpu since the critical, debug and machine check handlers use the contents of SPRN_PIR to index the critirq_ctx, dbgirq_ctx, and mcheckirq_ctx arrays. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
There are two entries for .cpu_user_features in arch/powerpc/kernel/cputable.c. Remove the one that doesn't belong Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Dave Kleikamp 提交于
Clear the machine check syndrom register before enabling machine check interrupts. The initial state of the tlb can lead to parity errors being flagged early after a cold boot. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Rupjyoti Sarmah 提交于
Device tree update for the Applied micro processor 460ex on-chip SATA Signed-off-by: NRupjyoti Sarmah <rsarmah@amcc.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Ian Campbell 提交于
by defining in terms of (1<<N). XEN_UNPLUG_UNNECESSARY and XEN_UNPLUG_NEVER are only used within the kernel and are not defined as a bit on the unplug IO port. Therefore use a bit which is outside the potentially valid range of the 16 bit IO port. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>
-
由 Ian Campbell 提交于
It is not immediately clear what this option causes to become ignored. The actual meaning is that it is not necessary to unplug the emulated devices to safely use the PV ones, even if the platform does not support the unplug protocol. (pressumably the user will only add this option if they have ensured that their domain configuration is safe). I think xen_emul_unplug=unnecessary better captures this. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>
-
由 Ian Campbell 提交于
this allows the user to disable pvhvm and revert to emulated devices in case of a system misconfiguration (e.g. initramfs with only emulated drivers in it). Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: NStefano Stabellini <Stefano.Stabellini@eu.citrix.com>
-
由 Jens Axboe 提交于
This adds support for the iPhone 4 to the ipheth driver. Acked-by: NDiego Giagio <diego@giagio.com> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
The recent commit to add constant optimization to hweight implicitly broke the Blackfin arch. Seems we were missed when all the other arches were fixed with renames. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Takashi Iwai 提交于
-
由 Jerone Young 提交于
This patch adds quirk for the Lenovo S10-3t so the headphone & microphone jacks will now work. Signed-off-by: NJerone Young <jerone.young@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
Why wouldn't kconfig symbol ISDN_DRV_AVMB1_B1PCMCIA also depend on PCMCIA? Fix build for PCMCIA not enabled: ERROR: "b1_free_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1ctl_proc_fops" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_reset_ctr" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_load_firmware" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_send_message" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_release_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_register_appl" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_getrevision" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_detect" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_interrupt" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! ERROR: "b1_alloc_card" [drivers/isdn/hardware/avm/b1pcmcia.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: Carsten Paeth <calle@calle.de> Cc: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Changli Gao 提交于
__packed is only defined in kernel space, so we should use __attribute__((packed)) for the code shared between kernel and user space. Two __attribute() annotations are replaced with __attribute__() too. Signed-off-by: NChangli Gao <xiaosuo@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev由 Linus Torvalds 提交于
* 'radix-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev: radix-tree: radix_tree_range_tag_if_tagged() can set incorrect tags radix-tree: clear all tags in radix_tree_node_rcu_free
-
由 Linus Torvalds 提交于
-
由 Dave Chinner 提交于
Commit ebf8aa44 ("radix-tree: omplement function radix_tree_range_tag_if_tagged") does not safely set tags on on intermediate tree nodes. The code walks down the tree setting tags before it has fully resolved the path to the leaf under the assumption there will be a leaf slot with the tag set in the range it is searching. Unfortunately, this is not a valid assumption - we can abort after setting a tag on an intermediate node if we overrun the number of tags we are allowed to set in a batch, or stop scanning because we we have passed the last scan index before we reach a leaf slot with the tag we are searching for set. As a result, we can leave the function with tags set on intemediate nodes which can be tripped over later by tag-based lookups. The result of these stale tags is that lookup may end prematurely or livelock because the lookup cannot make progress. The fix for the problem involves reocrding the traversal path we take to the leaf nodes, and only propagating the tags back up the tree once the tag is set in the leaf node slot. We are already recording the path for efficient traversal, so there is no additional overhead to do the intermediately node tag setting in this manner. This fixes a radix tree lookup livelock triggered by the new writeback sync livelock avoidance code introduced in commit f446daae ("mm: implement writeback livelock avoidance using page tagging"). Signed-off-by: NDave Chinner <dchinner@redhat.com> Acked-by: NJan Kara <jack@suse.cz>
-
由 Dave Chinner 提交于
Commit f446daae ("mm: implement writeback livelock avoidance using page tagging") introduced a new radix tree tag, increasing the number of tags in each node from 2 to 3. It did not, however, fix up the code in radix_tree_node_rcu_free() that cleans up after radix_tree_shrink() and hence could leave stray tags set in the new tag array. The result is that the livelock avoidance code added in the the above commit would hit stale tags when doing tag based lookups, resulting in livelocks when trying to traverse the tree. Fix this problem in radix_tree_node_rcu_free() so it doesn't happen again in the future by using a loop to walk all the tags up to RADIX_TREE_MAX_TAGS to clear the stray tags radix_tree_shrink() leaves behind. Signed-off-by: NDave Chinner <dchinner@redhat.com> Acked-by: NNick Piggin <npiggin@kernel.dk> Acked-by: NJan Kara <jack@suse.cz>
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of /ssd/git/drm-nouveau-next: drm/nouveau: fix earlier mistake when fixing merge conflict drm/nvc0: fix thinko in instmem suspend/resume drm/nouveau: Workaround missing GPIO tables on an Apple iMac G4 NV18. drm/nouveau: Add TV-out quirk for an MSI nForce2 IGP. drm/nv50-nvc0: ramht_size is meant to be in bytes, not entries drm/nouveau: punt some more log messages to debug level drm/nouveau: remove warning about unknown tmds table revisions drm/nouveau: check for error when allocating/mapping dummy page drm/nouveau: fix race condition when under memory pressure drm/nv50: fix minor thinko from nvc0 changes drm/nouveau: Don't try DDC on the dummy I2C channel.
-
由 Alex Deucher 提交于
Looks like this got copied from the ddx wrong. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
When enabling underscan for hdmi monitors, attempt to detect whether we are driving a TV or a monitor. The should hopefully prevent underscan from being enabled on monitors attached via hdmi that do not overscan the image. Only enable underscan if the mode is a common hdtv mode (480p, 720p, etc.). Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-