if either or both of MSG_ZEROCOPY and SOCK_ZEROCOPY have not been
specified, the rm->data.op_mmp_znotifier allocation will be skipped.
In this case, it is invalid ot pass down a cmsghdr with
RDS_CMSG_ZCOPY_COOKIE, so return EINVAL from rds_msg_zcopy for this
case.

Reported-by: syzbot+f893ae7bb2f6456dfbc3@syzkaller.appspotmail.com
Fixes: 0cebacce ("rds: zerocopy Tx support.")
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

r8168_check_dash() returns false anyway for all chip versions not
supporting dash. So we can simplify the check conditions.

In addition change the check functions to return bool instead of int,
because they actually return a bool value.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, if BIOS enables WOL in the chip, settings are inconsistent
because the device isn't marked as wakeup-enabled (if not done
explicitly via userspace tools). This causes issues with suspend/
resume because mdio_bus_phy_may_suspend() checks whether device is
wakeup-enabled. In detail MDIO bus access in phy_suspend() can fail
because the MDIO bus is disabled.

In the history of the driver we find two competing approaches:
8f9d5138 "r8169: remember WOL preferences on driver load" prefers
to preserve what the BIOS may have set, whilst bde135a6
"r8169: only enable PCI wakeups when WOL is active" disabled PCI
wakeup per default to work around a bug on one platform.

Seems like nobody complained after the latter patch about non-working
WOL, what makes me think that nobody uses WOL w/o configuring it
explicitly.

My opinion:
Vast majority of users doesn't use WOL even if the BIOS enables it in
the chip. And having WOL being active keeps the PHY(s) from powering
down if being idle.
If somebody needs WOL, he can enable it during boot, e.g. by
configuring systemd.link/WakeOnLan.

Therefore, to make WOL consistent again, disable it per default.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declaring a static function in a header leads to a warning every
time that header gets included without the function being used:

In file included from drivers/net/dsa/mv88e6xxx/chip.c:42:
drivers/net/dsa/mv88e6xxx/ptp.h:92:13: error: 'mv88e6xxx_hwtstamp_work' defined but not used [-Werror=unused-function]
 static long mv88e6xxx_hwtstamp_work(struct ptp_clock_info *ptp)
In file included from drivers/net/dsa/mv88e6xxx/chip.c:38:
drivers/net/dsa/mv88e6xxx/global2.h:355:12: error: 'mv88e6xxx_g2_wait' defined but not used [-Werror=unused-function]
 static int mv88e6xxx_g2_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask)
            ^~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:350:12: error: 'mv88e6xxx_g2_update' defined but not used [-Werror=unused-function]
 static int mv88e6xxx_g2_update(struct mv88e6xxx_chip *chip, int reg, u16 update)
            ^~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:345:12: error: 'mv88e6xxx_g2_write' defined but not used [-Werror=unused-function]
 static int mv88e6xxx_g2_write(struct mv88e6xxx_chip *chip, int reg, u16 val)
            ^~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.h:340:12: error: 'mv88e6xxx_g2_read' defined but not used [-Werror=unused-function]
 static int mv88e6xxx_g2_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)

This marks all such functions in dsa inline to make sure we don't warn
about them.

Fixes: c6fe0ad2 ("net: dsa: mv88e6xxx: add rx/tx timestamping support")
Fixes: 0d632c3d ("net: dsa: mv88e6xxx: add accessors for PTP/TAI registers")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: build and FW initramfs updates

This set brings empty makefiles to allow building single object files
(useful for build-testing), Kbuild does not cater to this use case
too well.  There are two ethernet drivers right now which suffer
from this (nfp, aquantia), both are fixed.

Dirk adds an uncommon FW image name to the list of firmware files
module may request.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The AMDA0099-0001 platform can support the 1x10G + 1x25G mixed mode
operation. Recently, firmware has been added for this configuration
mode.
Signed-off-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be able to build separate objects we need to provide
Kbuild with a Makefile in each directory.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To be able to build separate objects we need to provide
Kbuild with a Makefile in each directory.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2018-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Various updates across wireless.

One thing to note: I've included a new ethertype
that wireless uses (ETH_P_PREAUTH) in if_ether.h.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In multi channel scenarios, when disassociating from the AP before a
beacon was heard from the AP, it is not guaranteed that the virtual
interface is granted air time for the transmission of the
deauthentication frame. This in turn can lead to various issues as
the AP might never get the deauthentication frame.

To mitigate such possible issues, add a HW flag indicating that the
driver requires mac80211 to call the mgd_prep_tx() driver callback
to make sure that the virtual interface is granted immediate airtime
to be able to transmit the frame, in case that no beacon was heard
from the AP.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Extracting the TID from the QOS header is common enough
to justify helper.
Signed-off-by: NSara Sharon <sara.sharon@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Support getting the EOF bit value reported from hardware
and writing it out to radiotap.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

This adds 0x88c7 protocol type to if_ether.
Signed-off-by: NDenis Kenzior <denkenz@gmail.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The approach of one counter to rule them all when tracking the number
of active sub-crqs, pools, and napi has problems handling some failover
scenarios. This is due to the split in initializing the sub crqs,
pools and napi in different places and the placement of updating
the active counts.

This patch simplifies this by having a counter for tx and rx
sub-crqs, pools, and napi.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MV88E6352 and later switches support GPIO control through the "Scratch
& Misc" global2 register. Two of the pins controlled this way on the
mv88e6390 family are the external MDIO pins. They can either by used
as part of the MII interface for port 0, GPIOs, or MDIO. Add a
function to configure them for MDIO, if possible, and call it when
registering the external MDIO bus.
Suggested-by: NRussell King <rmk@armlinux.org.uk>
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the recent change, transmissions that only needed
one descriptor were being missed. The result is that such
packets were tracked as outstanding transmissions but never
removed when its completion notification was received.

Fixes: ffc385b9 ("ibmvnic: Keep track of supplementary TX descriptors")
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-02-21

This series includes shared code updates for mlx5 core driver for both
netdev and rdma subsystems.

By Saeed,
First six patches of the series are meant to address a performance issue
and should provide a performance boost for multi core IRQ interrupt hungry
workloads.  The issue is fixed in the first patch, all other patches are
meant to refactor the code in light of this fix.

The problem it comes to fix, is a shared spinlock accessed across all HCA
IRQs which protects the CQ database.  To solve this we simply move the CQ
database and its spinlock to be per EQ (IRQ), thus per core.

By Yonatan,
Fragmented completion queue (CQ) for RDMA,
core driver implementation to create fragmented CQ buffers rather than
one large contiguous memory buffer, the implementation scheme already
exist and used by the netdev CQs, the patch shares that code with the
rdma CQ creation flow and makes use of the new API in mlx5_ib driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Matteo Croce says:

====================
Remove IPVlan module dependencies on IPv6 and L3 Master dev

The IPVlan module currently depends on IPv6 and L3 Master dev.
Refactor the code to allow building IPVlan module regardless of the value
of CONFIG_IPV6 as done in other drivers like VxLAN or GENEVE.
Also change the CONFIG_NET_L3_MASTER_DEV dependency into a select,
since compiling L3 Master device alone has little sense.

$ grep -wE 'CONFIG_(IPV6|IPVLAN)' .config
CONFIG_IPV6=y
CONFIG_IPVLAN=m
$ ll drivers/net/ipvlan/ipvlan.ko
48K drivers/net/ipvlan/ipvlan.ko

$ grep -wE 'CONFIG_(IPV6|IPVLAN)' .config
CONFIG_IPVLAN=m
$ ll drivers/net/ipvlan/ipvlan.ko
44K drivers/net/ipvlan/ipvlan.ko
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The L3 Master device is just a glue between the core networking code and
device drivers, so it should be selected automatically rather than
requiring to be enabled explicitly.
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPVlan has an hard dependency on IPv6, refactor the ipvlan code to allow
compiling it with IPv6 disabled, move duplicate code into addr_equal()
and refactor series of if-else into a switch.
Signed-off-by: NMatteo Croce <mcroce@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow a rule that is being added/deleted/modified or
dumped to contain the originating protocol's id.

The protocol is handled just like a routes originating
protocol is.  This is especially useful because there
is starting to be a plethora of different user space
programs adding rules.

Allow the vrf device to specify that the kernel is the originator
of the rule created for this device.
Signed-off-by: NDonald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a failure occurs during initialization of the tx sub crq
irqs, we should branch to the cleanup of the tx irqs. The current
code branches to the rx irq cleanup and attempts to cleanup the
rx irqs which have not been initialized.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCPF_ macro depends on the definition of TCP_ macro.
So it is better to define them with TCP_ marco.
Signed-off-by: NYafang Shao <laoar.shao@gmail.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: remove non GSO code

Switching TCP to GSO mode, relying on core networking layers
to perform eventual adaptation for dumb devices was overdue.

1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
   -> less ACK packets and overhead.
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works. (no payload in skb->head)
7) rtx rb-tree contains less packets, SACK is cheaper.
8) Removal of legacy code. Less maintenance hassles.

Note that I have left the sendpage/zerocopy paths, but they probably can
benefit from the same strategy.

Thanks to Oleksandr Natalenko for reporting a performance issue for BBR/fq_codel,
which was the main reason I worked on this patch series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since all skbs in write/rtx queues have CHECKSUM_PARTIAL,
we can remove dead code.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.

We can remove dead code in tcp_sendmsg().
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since TCP relies on GSO, we do not need this helper anymore.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After previous commit, sk_can_gso() is always true.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Oleksandr Natalenko reported performance issues with BBR without FQ
packet scheduler that were root caused to lack of SG and GSO/TSO on
his configuration.

In this mode, TCP internal pacing has to setup a high resolution timer
for each MSS sent.

We could implement in TCP a strategy similar to the one adopted
in commit fefa569a ("net_sched: sch_fq: account for schedule/timers drifts")
or decide to finally switch TCP stack to a GSO only mode.

This has many benefits :

1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
   -> Lower ACK traffic
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works.
7) rtx rb-tree contains less packets, SACK is cheaper.

This patch implements the minimum patch, but we can remove some legacy
code as follow ups.

Tested:

On 40Gbit link, one netperf -t TCP_STREAM

BBR+fq:
sg on:  26 Gbits/sec
sg off: 15.7 Gbits/sec   (was 2.3 Gbit before patch)

BBR+pfifo_fast:
sg on:  24.2 Gbits/sec
sg off: 14.9 Gbits/sec  (was 0.66 Gbit before patch !!! )

BBR+fq_codel:
sg on:  24.4 Gbits/sec
sg off: 15 Gbits/sec  (was 0.66 Gbit before patch !!! )
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Make driver resources dynamic

The ibmvnic driver needs to be able to handle the number of tx/rx
sub-crqs changing during a reset of the driver. To do this several
changes need to be made. First the num_active_[tx|rx]_pools
counters need to be re-named to num_active_[tc|rx]_scrqs, and
updated after resource initialization.

With this change we can now release and init the sub crqs and napi
(for rx sub crqs) when the number of sub crqs change.

Lastly, the stats buffer allocation is updated to always allocate
the maximum number of sub-crqs count of stats buffers.

-Nathan
---

Updates for V3:
Patch 3/5 - Make do_h_free parameter a bool

Updates for V2:
Patch 3/5 - Use correct queue count when driver is in probed state
for releasing sub crqs.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To avoid losing any stats when the number of sub-crqs change, allocate
the max number of stats buffers so a stats buffer exists all possible
sub-crqs.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to handle the number of rx sub crqs changing during a driver
reset, the ibmvnic driver also needs to update the number of napi.
To do this the code to init and free napi's is moved to their own
routines so they can be called during the reset process.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the driver resets it is possible that the number of tx/rx
sub-crqs can change. This patch handles this so that the driver does
not try to access non-existent sub-crqs.

The count for releasing sub crqs depends on the adapter state. The
active queue count is not set in probe, so if we are relasing in probe
state we use the request queue count.

Additionally, a parameter is added to release_sub_crqs() so that
we know if the h_call to free the sub-crq needs to be made. In
the reset path we have to do a reset of the main crq, which is
a free followed by a register of the main crq. The free of main
crq results in all of the sub crq's being free'ed. When updating
sub-crq count in the reset path we do not want to h_free the
sub-crqs, they are already free'ed.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Inpreparation for using the active scrq count to track more active
resources, move the setting of the active count to after initialization
occurs in initial driver init and during driver reset.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rename the tx/rx active pool variables to be tx/rx active scrq
counts. The tx/rx pools are per sub-crq so this is a more appropriate
name. This also is a preparatory step for using thiese variables
for handling updates to sub-crqs and napi based on the active
count.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1465362 ("Missing break in switch")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Finn Thain says:

====================
Fixes, cleanup and modernization for 8390 ethernet drivers

Changes since v4 of combined patch series:
- Removed redundant and non-portable MACH_IS_MAC tests.
- Added acked-by tags from Geert Uytterhoeven.
- Omitted patches unrelated to 8390 drivers.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dev_foo() to log the slot number instead of the unexpanded "eth%d"
format string.
Disambiguate the two identical "Card type %s is unsupported" messages.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This resolves an old bug that constrained this driver to no more than
one card.
Tested-by: NStan Johnson <userm57@yahoo.com>
Signed-off-by: NFinn Thain <fthain@telegraphics.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>