Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dev_deactivate function has bit-rotted since the introduction of
lockless drivers.  In particular, the spin_unlock_wait call at the end
has no effect on the xmit routine of lockless drivers.

With a little bit of work, we can make it much more useful by providing
the guarantee that when it returns, no more calls to the xmit routine
of the underlying driver will be made.

The idea is simple.  There are two entry points in to the xmit routine.
The first comes from dev_queue_xmit.  That one is easily stopped by
using synchronize_rcu.  This works because we set the qdisc to noop_qdisc
before the synchronize_rcu call.  That in turn causes all subsequent
packets sent to dev_queue_xmit to be dropped.  The synchronize_rcu call
also ensures all outstanding calls leave their critical section.

The other entry point is from qdisc_run.  Since we now have a bit that
indicates whether it's running, all we have to do is to wait until the
bit is off.

I've removed the loop to wait for __LINK_STATE_SCHED to clear.  This is
useless because netif_wake_queue can cause it to be set again.  It is
also harmless because we've disarmed qdisc_run.

I've also removed the spin_unlock_wait on xmit_lock because its only
purpose of making sure that all outstanding xmit_lock holders have
exited is also given by dev_watchdog_down.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to update hiscore.rule even if we don't enable CONFIG_IPV6_PRIVACY,
because we have more less significant rule; longest match.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two additional labels (RFC 3484, sec. 10.3) for IPv6 addreses
are defined to make a distinction between global unicast
addresses and Unique Local Addresses (fc00::/7, RFC 4193) and
Teredo (2001::/32, RFC 4380). It is necessary to avoid attempts
of connection that would either fail (eg. fec0:: to 2001:feed::)
or be sub-optimal (2001:0:: to 2001:feed::).
Signed-off-by: NŁukasz Stelmach <stlman@poczta.fm>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First of all it is unnecessary to allocate a new skb in skb_pad since
the existing one is not shared.  More importantly, our hard_start_xmit
interface does not allow a new skb to be allocated since that breaks
requeueing.

This patch uses pskb_expand_head to expand the existing skb and linearize
it if needed.  Actually, someone should sift through every instance of
skb_pad on a non-linear skb as they do not fit the reasons why this was
originally created.

Incidentally, this fixes a minor bug when the skb is cloned (tcpdump,
TCP, etc.).  As it is skb_pad will simply write over a cloned skb.  Because
of the position of the write it is unlikely to cause problems but still
it's best if we don't do it.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  [PATCH] Driver core: fix locking issues with the devices that are attached to classes
  [PATCH] USB: get USB suspend to work again

Doh, that was foolish...
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Yeah, it's a hack, but it is only temporary until Alan's patches
reworking this area make it in.  We really should not care what devices
below us are doing, especially when we do not really know what type of
devices they are.  This patch relies on the fact that the endpoint
devices do not have a driver assigned to us.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [ARM] 3565/1: AT91RM9200 MMC update
  [MMC] Convert all hosts except mmci to use data->blksz

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits)
  [ARM] 3629/1: S3C24XX: fix missing bracket in regs-dsc.h
  [ARM] 3537/1: Rework DMA-bounce locking for finer granularity
  [ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels only
  [ARM] 3597/1: ixp4xx/nslu2: Board support for new LED subsystem
  [ARM] 3595/1: ixp4xx/nas100d: Board support for new LED subsystem
  [ARM] 3626/1: ARM EABI: fix syscall restarting
  [ARM] 3628/1: S3C24XX: add get_rate call to struct clk
  [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks
  [ARM] 3613/1: S3C2410: Add sysdev and sysclass
  [ARM] 3624/1: Report true modem control line states
  [ARM] 3620/2: ixp23xx: add uengine loader support
  [ARM] 3618/1: add defconfig for logicpd pxa270 card engine
  [ARM] 3617/1: ep93xx: fix slightly incorrect timer tick rate
  [ARM] 3616/1: fix timer handler wrap logic for a number of platforms
  [ARM] 3615/1: ixp23xx: use platform devices for physmap flash
  [ARM] 3614/1: ep93xx: use platform devices for physmap flash
  [ARM] 3621/1: fix compilation breakage for pnx4008
  [ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h
  [ARM] 3622/1: pnx4008: remove clk_use/clk_unuse
  [ARM] Enable VFP to be built when non-VFP capable CPUs are selected
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial:
  [ARM] 3600/1: increase amba-pl010 UART_NR to 8
  [ARM] 3571/1: netX: serial driver for Hilscher netX

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix ondemand vs suspend deadlock
  [CPUFREQ] Fix powernow-k8 SMP kernel on UP hardware bug.
  [PATCH] redirect speedstep-centrino maintainer mail to cpufreq list
  [CPUFREQ] correct powernow-k8 fid/vid masks for extended parts
  [CPUFREQ] Clarify powernow-k8 cpu_family statements

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits)
  [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI
  [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804
  via-velocity: the link is not correctly detected when the device starts
  [PATCH] add b44 to maintainers
  [PATCH] WAN: ioremap() failure checks in drivers
  [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name()
  [PATCH] skb_padto()-area fixes in 8390, wavelan
  [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static
  [PATCH] network driver for Hilscher netx
  [PATCH] Dereference in tokenring/olympic.c
  [PATCH] Array overrun in drivers/net/wireless/wavelan.c
  [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c
  [PATCH] 8139cp: add ethtool eeprom support
  [PATCH] 8139cp: fix eeprom read command length
  [PATCH] b44: update b44 Kconfig entry
  [PATCH] b44: update version to 1.01
  [PATCH] b44: add wol for old nic
  [PATCH] b44: add parameter
  [PATCH] b44: add wol
  [PATCH] b44: fix manual speed/duplex/autoneg settings
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h

We don't need to restore the state right after saving it for later recovery
since commit 99dc804d (PCI: disable msi mode
in pci_disable_device) now prevents pci_save_state() from disabling MSI.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We don't need to hardcode the AER capability of the nVidia CK804 chipset
anymore since commit cf34a8e0 (PCI: nVidia
quirk to make AER PCI-E extended capability visible) now makes sure that
this cap will be available to pci_find_ext_capability().
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add b44 to the MAINTAINERS file.
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Eric Sesterhenn found that pci200syn initialization lacks return
statement in ioremap() error path (coverity bug id #195). It looks
like more WAN drivers have problems with ioremap().
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

David Boggs noticed that register_hdlc_device() no longer needs
to call dev_alloc_name() as it's called by register_netdev().
register_hdlc_device() is currently equivalent to register_netdev().

hdlc_setup() is now EXPORTed as per David's request.
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Ar Iau, 2006-06-22 am 21:29 +1000, ysgrifennodd Herbert Xu:
> Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> >
> > The 8390 change (corrected version) also makes 8390.c faster so should
> > be applied anyway, and the orinoco one fixes some code that isn't even
> > needed and someone forgot to remove long ago. Otherwise the skb_padto
>
> Yeah I agree totally.  However, I haven't actually seen the fixed 8390
> version being posted yet or at least not to netdev :)

Ah the resounding clang of a subtle hint ;)
Signed-off-by: NAlan Cox <alan@redhat.com>

- Return 8390.c to the old way of handling short packets (which is also
faster)

- Remove the skb_padto from orinoco. This got left in when the padding bad
write patch was added and is actually not needed. This is fixing a merge
error way back when.

- Wavelan can also use the stack based buffer trick if you want
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch makes the needlessly global nv_update_pause() static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This is a patch for the Hilscher netx builtin ethernet ports. The
netx board support was merged into 2.6.17-git2.
The netx is a arm926 based SoC.
Signed-off-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

--
 drivers/net/Kconfig             |   11
 drivers/net/Makefile            |    1
 drivers/net/netx-eth.c          |  516 ++++++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-netx/eth.h |   27 ++
 4 files changed, 555 insertions(+)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

hi,

coverity found (bug id #225) that we might call free_netdev()
with NULL argument, when alloc_trdev() fails. This patch
changes the goto, so we dont call free_netdev() for
dev == NULL.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

hi,

this is another array overrun spotted by coverity (#id 507)
we should check the index against array size before using it.
Not sure why the driver doesnt use ARRAY_SIZE instead of its
own macro.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

hi,

coverity choked at this check (id #223), assuming that
skb might be NULL and used anyways later. Since
start_hard_xmit() always gets called with a valid
skb, the check is useless and this patch removes it.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Implement the ethtool eeprom operations for the 8139cp driver.
Tested on x86 and big-endian ARM.
Signed-off-by: NPhilip Craig <philipc@snapgear.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The read command for the 93C46/93C56 EEPROMS should be 3 bits plus
the address.  This doesn't appear to affect the operation of the
read command, but similar errors for write commands do cause failures.
Signed-off-by: NPhilip Craig <philipc@snapgear.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Deleted "EXPERIMENTAL" from b44 entry in Kconfig.
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Update the driver version to 1.01
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds wol support for the older 440x nics that use pattern matching.
This patch is a redo thanks to feedback from Michael Chan and Francois Romieu.
Signed-off-by: NGary Zambrano  <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds a parameter to init_hw() to not completely initialize
the nic for wol.
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Adds wol to the driver.
This is a redo of a previous patch thanks to feedback from Francois Romieu.

Signed-off-by Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Fixes for speed/duplex/autoneg settings and driver settings info.
This is a redo of a previous patch thanks to feedback from Jeff Garzik.
Signed-off-by: NGary Zambrano <zambrano@broadcom.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Adds power-management (suspend/resume) support to the AT91RM9200
Ethernet driver.
Patch from David Brownell.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Moved global ether_clk variable into controller data structure.
Patch from David Brownell.

Davicom 9161 PHY was being incorrectly displayed as "9196".
Patch from Brian Stafford.

clk_get() doesn't return NULL on error, so the return value needs to be
tested with IS_ERR().

Whitespace cleanup.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Adds support for the MII ioctls via generic_mii_ioctl().
Patch from Brian Stafford.

Set the mii.phy_id to the detected PHY address, otherwise ethtool cannot
access PHYs other than 0.
Patch from Roman Kolesnikov.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

For Ethernet PHYs that don't have an IRQ pin or boards that don't
connect the IRQ pin to the processor, we enable a timer to poll the
PHY's link state.

Patch originally supplied by Eric Benard and Roman Kolesnikov.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

IOC3's homegrown DMA mapping functions that are used to optimize things
a little on IP27 set the wrong bit.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>