Previously it was called _info with instances as info.  This caused some
confusion against the info structure that are used in the core of IIO.

Since this driver was written it's become a fairly strong convention to
use _state and st for instances so change to that.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

There was a bit of a random mixture going on here so change all prefixes
to LPC32XXAD_
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

There are some unanswered questions due to disagreements between the code
and various datasheets (including between different datasheets for the same
part).

I don't think that is necessarily a reason to keep it in staging however.
I'm partly posting this patch inorder to reignite debate and with a bit
of luck find someone who has one of these to test!
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add Brian Masney's copyright to the header for the several rounds of
staging cleanups that has been done to this driver.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

With the introduction of runtime power management in commit 2db5054a
("staging: iio: isl29028: add runtime power management support"), the
system could go to sleep and turn off the device without notifying the
runtime power management code. This patch changes the system suspend
and resume to go through the runtime power management.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

When proximity is enabled in isl29028_enable_proximity(), the function
msleep() is called with the sampling frequency, which is not correct.
This patch changes the code to sleep the specified amount of time listed
in the datasheet instead.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This driver in some cases can busy wait for upwards of 100 ms. Since the
kernel at this point is not running in atomic context, and is running in
process context, we can safely use msleep() instead. This patch changes
the two occurrences of mdelay() to msleep().
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Changed file permissions to octal.
Found with checkpatch.
Signed-off-by: NDerek Robson <robsonde@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds ALERT irq and limit threshold events support for TI TMP007 - 16 bit IR thermopile sensor with integrated
math engine.

Following threshold events are supported:
1. TObj high limit
2. TObj low limit
3. TDie high limit
4. TDie low limit
Signed-off-by: NManivannan Sadhasivam <manivannanece23@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

MAX30102 is an heart rate and pulse oximeter sensor that works using
two LEDS of different wavelengths, and detecting the light reflected
back.

This patchset adds support for both IR and RED LED channels which can
be processed in userspace to determine heart rate and blood oxygen
levels. The MAX30102 part isn't completely register and functional
compatible with the existing MAX30100 driver.
Signed-off-by: NMatt Ranostay <matt@ranostay.consulting>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Replaced the symbolic permission references S_IRUGO and S_IWUSR with their
octal counterparts.
Signed-off-by: NArtur Lorincz <larturus@yahoo.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMichael S. Hansen <michael.schacht.hansen@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add basic IIO support for the Analog Devices ADXL345 3-axis accelerometer.
The datasheet can be found here:
http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL345.pdfSigned-off-by: NEva Rachel Retuya <eraretuya@gmail.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Handle Light and Proximity sensors presented by the ChromeOS EC Sensor hub.
Creates an IIO device for each functions.
Signed-off-by: NGwendal Grignou <gwendal@chromium.org>
Signed-off-by: NGuenter Roeck <groeck@chromium.org>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support to STM LSM6DS3H 6-axis (acc + gyro) Mems sensor

http://www.st.com/resource/en/datasheet/lsm6ds3h.pdfSigned-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add support to STM LSM6DSL 6-axis (acc + gyro) Mems sensor

http://www.st.com/resource/en/datasheet/lsm6dsl.pdfSigned-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Add capability to support multiple devices with the same
st_lsm6dsx_settings like LSM6DSM/LSM6DSL
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch adds support for the ultrasonic ranger srf04 of devantech.

This device is measuring the distance of objects in a range between 1 cm
and 3 meters and a theoretical resolution of 3 mm.

There are two GPIOs used:
  - trigger: set as output to the device when the measurement should start
  - echo: set by the device when the ultrasonic wave is sent out and reset
    when the echo is recognized; this needs to be an interrupt input

The time between setting and resetting the echo pin is the time the
waveform needed for one round trip. This time is recorded in the interrupt
handler.

The distance is calculated in the read function by using the ultrasonic
speed at 20 degrees celsius which is about 343 m/s.
Signed-off-by: NAndreas Klinger <ak@it-klinger.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Changed symbolic permissions to octal permissions.
Found using checkpatch
Signed-off-by: NDerek Robson <robsonde@gmail.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This replaces the last occurrence of the deprecated <asm/uaccess.h> include
in the staging directory with the newer <linux/uaccess.h>
Signed-off-by: NSeraphime Kirkovski <kirkseraph@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The problem is that we copy hdr.ioc_len, we verify it, then we copy it
again without checking to see if it has changed in between the two
copies.

This could result in an information leak.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to fix "WARNING: line over 80 characters" found by
checkpatch.pl in vvp_page.c.
Signed-off-by: NZhengyi Shen <shenzhengyi@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The reason for __REQ_LAYOUT_USER__ was to expose a
section of code in layout.c to userland for a utility
similar to wireshark. This was done before wireshark
existed but now that it does we no longer need to do
this type of hack. This also reduces lustre_acl.h to
strictly a kernel header now.
Signed-off-by: NJames Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8945
Reviewed-on: https://review.whamcloud.com/24396Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The use of 64 bit time introduces an expensive 64 bit
division operation. Since the time lapse being calculated
in osc_cache_too_much will never be more than seventy years
we can cast the time lapse to an long and perform a normal
32 bit divison operation instead.
Signed-off-by: NJames Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8835
Reviewed-on: https://review.whamcloud.com/23814Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If an application attempts to remove millions of files in a
single directory it will fail. This failure was tracked down to
the nlink < 2 check in lmv_revalidate_slaves, because after
nlink reaches to maximum value of LDISKFS_LINK_MAX (65000),
the nlink broadcast back from the server will be reported as
one. The return value of 1 is not invalid so lets remove
the check.
Signed-off-by: Nwang di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6984
Reviewed-on: http://review.whamcloud.com/16490Reviewed-by: NJames Simmons <uja.ornl@yahoo.com>
Reviewed-by: NJian Yu <jian.yu@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function generic_file_read_iter() does not check EOF
before invoke direct_IO callback. So we have to check it
ourselves.
Signed-off-by: NYang Sheng <yang.sheng@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8969
Reviewed-on: https://review.whamcloud.com/24552Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NBobi Jam <bobijam@hotmail.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Building the lustre client with W=1 reports the following
error:

obdclass/obd_mount.c: In function lmd_parse:
obdclass/obd_mount.c:880: warning: variable set but not used

The solution is to move s3 to the inner loop
where it is only used.
Signed-off-by: NJames Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8378
Reviewed-on: https://review.whamcloud.com/23820Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Reviewed-by: NJinshan Xiong <jinshan.xiong@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes no functional changes.  Struct initializers in the
fid directory that use C89 or GCC-only syntax are updated to C99
syntax.

The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.

The following struct initializers have been updated:

lustre/fid/fid_lib.c:
        const struct lu_seq_range LUSTRE_SEQ_SPACE_RANGE
        const struct lu_seq_range LUSTRE_SEQ_ZERO_RANGE
lustre/fid/lproc_fid.c:
        struct lprocfs_vars seq_client_debugfs_list
Signed-off-by: NSteve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23789Reviewed-by: NNathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@yahoo.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The replay cursor should be updated properly when close happened
during replay, otherwise, ptlrpc_replay_next() could run into a
dead loop due to an invalid replay cursor:

- replay cursor is moved to an open request during replay;
- application close that open file, so the rq_replay of the open
  request is cleared;
- ptlrpc_replay_next() calls ptlrpc_free_committed() to free
  committed/closed requests, the open request is removed from
  the committed list, so the replay cursor is changed to an
  empty list_head now. The open request won't be freed now since
  it's still held by the pending close request;
- ptlrpc_replay_next() continue to move the replay cursor to
  next and run into a dead loop at the end;

Another change in this patch is to remove the out of date comments
in ptlrpc_replay_next() and cover the whole process of finding
replay request within imp_lock, because:

1. With two separated replay lists and replay cursor introduced,
   finding replay request won't take much time as before, it's
   not necessary to do this "lock -> unlock -> lock -> unlock"
   trick anymore;

2. Nowadays there are various kind of non-replay requests are
   allowed during recovery, so ptlrpc_free_committed() may run in
   parallel to remove an open request while ptlrpc_replay_next()
   is iterating the open requests list;
Signed-off-by: NNiu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8765
Reviewed-on: https://review.whamcloud.com/23418Reviewed-by: NYang Sheng <yang.sheng@intel.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update max_ptlrpcds module parameter descriptions to let
users know its obsolete. Change cpt to CPT for the module
parameter description ptlrpcd_per_cpt_max so it matches
documentation.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8890
Reviewed-on: https://review.whamcloud.com/24065Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Environment for request interpreters is not used any more.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8887
Reviewed-on: https://review.whamcloud.com/24061Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the inline function socklnd_init_msg.
Its only used by the kernel code so no point
keeping it in an UAPI header.
Signed-off-by: NJames Simmons <uja.ornl@yahoo.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6142
Reviewed-on: https://review.whamcloud.com/18506Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: NDoug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ksocklnd reaper thread always tries to close the connection for the
first timedout zero-copy TX. This is wrong if this connection is
already being closed, because the reaper will see the same TX again
and again and cannot find out other timedout zero-copy TXs and close
connections for them.
Signed-off-by: NLiang Zhen <liang.zhen@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8867
Reviewed-on: https://review.whamcloud.com/23973Reviewed-by: NDoug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In mdc_close() if ptlrpc_request_pack() fails then set req to NULL so
that an already freed request is not returned in *request.
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8811
Reviewed-on: https://review.whamcloud.com/23843Reviewed-by: NPatrick Farrell <paf@cray.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

An earlier commit accidentally changed handling of IT_OPEN,
making it take the MDS_INODELOCK_UPDATE bits lock instead of
MDS_INODELOCK_LOOKUP. This does not cause any known bugs.
Signed-off-by: NPatrick Farrell <paf@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8842
Reviewed-on: https://review.whamcloud.com/23797
Fixes: 70a251f6 ("staging: lustre: obd: decruft md_enqueue() and md_intent_lock()"
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NLai Siyao <lai.siyao@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch makes no functional changes. Struct initializers in the
libcfs directory that use C89 or GCC-only syntax are updated to C99
syntax.

The C99 syntax prevents incorrect initialization if values are
accidently placed in the wrong position, allows changes in the struct
definition, and clears any members that are not given an explicit
value.

The following struct initializers have been updated:

libcfs/include/libcfs/libcfs_crypto.h:
        static struct cfs_crypto_hash_type hash_types[]
Signed-off-by: NSteve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-6210
Reviewed-on: https://review.whamcloud.com/23332Reviewed-by: NFrank Zago <fzago@cray.com>
Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@yahoo.com>
Reviewed-by: NNathaniel Clark <nathaniel.l.clark@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't treat unability to set CPU partition affinity as error.
Improve those warning messages.
Signed-off-by: NDmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8703
Reviewed-on: https://review.whamcloud.com/23307Reviewed-by: NPatrick Farrell <paf@cray.com>
Reviewed-by: NDoug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

None of the obd_notify() handlers listen for the OBD_NOTIFY_CREATE
event, so remove it and its sole use in lov_add_target().
Signed-off-by: NJohn L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8403
Reviewed-on: https://review.whamcloud.com/21420Reviewed-by: NBen Evans <bevans@cray.com>
Reviewed-by: NAndreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ptlrpc_import_delay_req() refuses to delay blocking asts when import
is not in LUSTRE_IMP_FULL yet. That leads to client eviction assuming
that it failed to respond.

Allow delays for blocking asts being resent.
Signed-off-by: NVladimir Saveliev <vladimir.saveliev@seagate.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8351
Seagate-bug-id: MRP-3500
Reviewed-on: https://review.whamcloud.com/21065Reviewed-by: NBobi Jam <bobijam@hotmail.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch updates the prototype in osc_internal.h to match the
enums used in the declaration.

The osc_match_base declaration in lustre/osc/osc_request.c uses
enums for stricter checking on the type and mode parameters:

int osc_match_base(struct obd_export *exp,
                   ...
-->                enum ldlm_type type,
                   union ldlm_policy_data *policy,
-->                enum ldlm_mode mode,
                   ...  int unref)

The prototype in lustre/osc/osc_internal.h instead used unsigned ints:

int osc_match_base(struct obd_export *exp,
                   ...
-->                __u32 type,
                       union ldlm_policy_data *policy,
-->                __u32 mode,
                   ...  int unref);
Signed-off-by: NSteve Guminski <stephenx.guminski@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-8189
Reviewed-on: http://review.whamcloud.com/23167Reviewed-by: NFrank Zago <fzago@cray.com>
Reviewed-by: NBob Glossman <bob.glossman@intel.com>
Reviewed-by: NJames Simmons <uja.ornl@yahoo.com>
Reviewed-by: NJohn L. Hammond <john.hammond@intel.com>
Reviewed-by: NDmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: NOleg Drokin <oleg.drokin@intel.com>
Signed-off-by: NJames Simmons <jsimmons@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>