1. 07 1月, 2014 19 次提交
    • J
      dm cache policy mq: introduce three promotion threshold tunables · 78e03d69
      Joe Thornber 提交于
      Internally the mq policy maintains a promotion threshold variable.  If
      the hit count of a block not in the cache goes above this threshold it
      gets promoted to the cache.
      
      This patch introduces three new tunables that allow you to tweak the
      promotion threshold by adding a small value.  These adjustments depend
      on the io type:
      
         read_promote_adjustment:    READ io, default 4
         write_promote_adjustment:   WRITE io, default 8
         discard_promote_adjustment: READ/WRITE io to a discarded block, default 1
      
      If you're trying to quickly warm a new cache device you may wish to
      reduce these to encourage promotion.  Remember to switch them back to
      their defaults after the cache fills though.
      Signed-off-by: NJoe Thornber <ejt@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      78e03d69
    • W
    • M
      dm thin: fix set_pool_mode exposed pool operation races · 8b64e881
      Mike Snitzer 提交于
      The pool mode must not be switched until after the corresponding pool
      process_* methods have been established.  Otherwise, because
      set_pool_mode() isn't interlocked with the IO path for performance
      reasons, the IO path can end up executing process_* operations that
      don't match the mode.  This patch eliminates problems like the following
      (as seen on really fast PCIe SSD storage when transitioning the pool's
      mode from PM_READ_ONLY to PM_WRITE):
      
      kernel: device-mapper: thin: 253:2: reached low water mark for data device: sending event.
      kernel: device-mapper: thin: 253:2: no free data space available.
      kernel: device-mapper: thin: 253:2: switching pool to read-only mode
      kernel: device-mapper: thin: 253:2: switching pool to write mode
      kernel: ------------[ cut here ]------------
      kernel: WARNING: CPU: 11 PID: 7564 at drivers/md/dm-thin.c:995 handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]()
      ...
      kernel: Workqueue: dm-thin do_worker [dm_thin_pool]
      kernel: 00000000000003e3 ffff880308831cc8 ffffffff8152ebcb 00000000000003e3
      kernel: 0000000000000000 ffff880308831d08 ffffffff8104c46c ffff88032502a800
      kernel: ffff880036409000 ffff88030ec7ce00 0000000000000001 00000000ffffffc3
      kernel: Call Trace:
      kernel: [<ffffffff8152ebcb>] dump_stack+0x49/0x5e
      kernel: [<ffffffff8104c46c>] warn_slowpath_common+0x8c/0xc0
      kernel: [<ffffffff8104c4ba>] warn_slowpath_null+0x1a/0x20
      kernel: [<ffffffffa001e2c6>] handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]
      kernel: [<ffffffffa001f276>] process_bio_read_only+0x136/0x180 [dm_thin_pool]
      kernel: [<ffffffffa0020b75>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
      kernel: [<ffffffffa0020d31>] do_worker+0x51/0x60 [dm_thin_pool]
      kernel: [<ffffffff81067823>] process_one_work+0x183/0x490
      kernel: [<ffffffff81068c70>] worker_thread+0x120/0x3a0
      kernel: [<ffffffff81068b50>] ? manage_workers+0x160/0x160
      kernel: [<ffffffff8106e86e>] kthread+0xce/0xf0
      kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
      kernel: [<ffffffff8153b3ec>] ret_from_fork+0x7c/0xb0
      kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
      kernel: ---[ end trace 3f00528e08ffa55c ]---
      kernel: device-mapper: thin: pool mode is PM_WRITE not PM_READ_ONLY like expected!?
      
      dm-thin.c:995 was the WARN_ON_ONCE(get_pool_mode(pool) != PM_READ_ONLY);
      at the top of handle_unserviceable_bio().  And as the additional
      debugging I had conveys: the pool mode was _not_ PM_READ_ONLY like
      expected, it was already PM_WRITE, yet pool->process_bio was still set
      to process_bio_read_only().
      
      Also, while fixing this up, reduce logging of redundant pool mode
      transitions by checking new_mode is different from old_mode.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org
      8b64e881
    • M
      dm thin: eliminate the no_free_space flag · 6d16202b
      Mike Snitzer 提交于
      The pool's error_if_no_space flag can easily serve the same purpose that
      no_free_space did, namely: control whether handle_unserviceable_bio()
      will error a bio or requeue it.
      
      This is cleaner since error_if_no_space is established when the pool's
      features are processed during table load.  So it avoids managing the
      no_free_space flag by taking the pool's spinlock.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      6d16202b
    • M
      dm thin: add error_if_no_space feature · 787a996c
      Mike Snitzer 提交于
      If the pool runs out of data or metadata space, the pool can either
      queue or error the IO destined to the data device.  The default is to
      queue the IO until more space is added.
      
      An admin may now configure the pool to error IO when no space is
      available by setting the 'error_if_no_space' feature when loading the
      thin-pool table.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      787a996c
    • M
      dm thin: requeue bios to DM core if no_free_space and in read-only mode · 8c0f0e8c
      Mike Snitzer 提交于
      Now that we switch the pool to read-only mode when the data device runs
      out of space it causes active writers to get IO errors once we resume
      after resizing the data device.
      
      If no_free_space is set, save bios to the 'retry_on_resume_list' and
      requeue them on resume (once the data or metadata device may have been
      resized).
      
      With this patch the resize_io test passes again (on slower storage):
       dmtest run --suite thin-provisioning -n /resize_io/
      
      Later patches fix some subtle races associated with the pool mode
      transitions done as part of the pool's -ENOSPC handling.  These races
      are exposed on fast storage (e.g. PCIe SSD).
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      8c0f0e8c
    • M
      dm thin: cleanup and improve no space handling · 399caddf
      Mike Snitzer 提交于
      Factor out_of_data_space() out of alloc_data_block().  Eliminate the use
      of 'no_free_space' as a latch in alloc_data_block() -- this is no longer
      needed now that we switch to read-only mode when we run out of data or
      metadata space.  In a later patch, the 'no_free_space' flag will be
      eliminated entirely (in favor of checking metadata rather than relying
      on a transient flag).
      
      Move no metdata space handling into metdata_operation_failed().  Set
      no_free_space when metadata space is exhausted too.  This is useful,
      because it offers consistency, for the following patch that will requeue
      data IOs if no_free_space.
      
      Also, rename no_space() to retry_bios_on_resume().
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      399caddf
    • M
      6f7f51d4
    • J
      dm thin: handle metadata failures more consistently · b5330655
      Joe Thornber 提交于
      Introduce metadata_operation_failed() wrappers, around set_pool_mode(),
      to assist with improving the consistency of how metadata failures are
      handled.  Logging is improved and metadata operation failures trigger
      read-only mode immediately.
      
      Also, eliminate redundant set_pool_mode() calls in the two
      alloc_data_block() caller's error paths.
      Signed-off-by: NJoe Thornber <ejt@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      b5330655
    • J
      dm thin: factor out check_low_water_mark and use bools · 88a6621b
      Joe Thornber 提交于
      Factor check_low_water_mark() out of alloc_data_block().
      Change a couple unsigned flags in the pool structure to bool.
      Signed-off-by: NJoe Thornber <ejt@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      88a6621b
    • M
      dm thin: add mappings to end of prepared_* lists · daec338b
      Mike Snitzer 提交于
      Mappings could be processed in descending logical block order,
      particularly if buffered IO is used.  This could adversely affect the
      latency of IO processing.  Fix this by adding mappings to the end of the
      'prepared_mappings' and 'prepared_discards' lists.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      daec338b
    • J
    • M
      dm thin: use bool rather than unsigned for flags in structures · 7f214665
      Mike Snitzer 提交于
      Also, move 'err' member in dm_thin_new_mapping structure to eliminate 4
      byte hole (reduces size from 88 bytes to 80).
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      7f214665
    • M
      dm persistent data: cleanup dm-thin specific references in text · 10343180
      Mike Snitzer 提交于
      DM's persistent-data library is now used my multiple targets so
      exclusive references to "pool" or "thin provisioning" need to be
      cleaned up.  Adjust Kconfig's DM_DEBUG_BLOCK_STACK_TRACING text
      and remove "pool" from a block manager error message.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      10343180
    • M
      dm space map metadata: limit errors in sm_metadata_new_block · c46985e2
      Mike Snitzer 提交于
      The "unable to allocate new metadata block" error can be a particularly
      verbose error if there is a systemic issue with the metadata device.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      c46985e2
    • M
      dm delay: use per-bio data instead of a mempool and slab cache · 42065460
      Mikulas Patocka 提交于
      Starting with commit c0820cf5 ("dm: introduce per_bio_data"),
      device mapper has the capability to pre-allocate a target-specific
      structure with the bio.
      
      This patch changes dm-delay to use this facility instead of a slab cache
      and mempool.
      Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      42065460
    • M
      dm table: remove unused buggy code that extends the targets array · 57a2f238
      Mikulas Patocka 提交于
      A device mapper table is allocated in the following way:
      * The function dm_table_create is called, it gets the number of targets
        as an argument -- it allocates a targets array accordingly.
      * For each target, we call dm_table_add_target.
      
      If we add more targets than were specified in dm_table_create, the
      function dm_table_add_target reallocates the targets array.  However,
      this reallocation code is wrong - it moves the targets array to a new
      location, while some target constructors hold pointers to the array in
      the old location.
      
      The following DM target drivers save the pointer to the target
      structure, so they corrupt memory if the target array is moved:
      multipath, raid, mirror, snapshot, stripe, switch, thin, verity.
      
      Under normal circumstances, the reallocation function is not called
      (because dm_table_create is called with the correct number of targets),
      so the buggy reallocation code is not used.
      
      Prior to the fix "dm table: fail dm_table_create on dm_round_up
      overflow", the reallocation code could only be used in case the user
      specifies too large a value in param->target_count, such as 0xffffffff.
      Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      57a2f238
    • J
      dm thin: fix discard support to a previously shared block · 19fa1a67
      Joe Thornber 提交于
      If a snapshot is created and later deleted the origin dm_thin_device's
      snapshotted_time will have been updated to reflect the snapshot's
      creation time.  The 'shared' flag in the dm_thin_lookup_result struct
      returned from dm_thin_find_block() is an approximation based on
      snapshotted_time -- this is done to avoid 0(n), or worse, time
      complexity.  In this case, the shared flag would be true.
      
      But because the 'shared' flag reflects an approximation a block can be
      incorrectly assumed to be shared (e.g. false positive for 'shared'
      because the snapshot no longer exists).  This could result in discards
      issued to a thin device not being passed down to the pool's underlying
      data device.
      
      To fix this we double check that a thin block is really still in-use
      after a mapping is removed using dm_pool_block_is_used().  If the
      reference count for a block is now zero the discard is allowed to be
      passed down.
      
      Also add a 'definitely_not_shared' member to the dm_thin_new_mapping
      structure -- reflects that the 'shared' flag in the response from
      dm_thin_find_block() can only be held as definitive if false is
      returned.
      
      Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1043527Signed-off-by: NJoe Thornber <ejt@redhat.com>
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org
      19fa1a67
    • M
      dm thin: initialize dm_thin_new_mapping returned by get_next_mapping · 16961b04
      Mike Snitzer 提交于
      As additional members are added to the dm_thin_new_mapping structure
      care should be taken to make sure they get initialized before use.
      Signed-off-by: NMike Snitzer <snitzer@redhat.com>
      Acked-by: NJoe Thornber <ejt@redhat.com>
      Cc: stable@vger.kernel.org
      16961b04
  2. 16 12月, 2013 8 次提交
    • L
      Linux 3.13-rc4 · 319e2e3f
      Linus Torvalds 提交于
      319e2e3f
    • M
      null_blk: mem garbage on NUMA systems during init · 57053d8c
      Matias Bjorling 提交于
      For NUMA systems, initializing the blk-mq layer and using per node hctx.
      We initialize submit queues to 1, while blk-mq nr_hw_queues is
      initialized to the number of NUMA nodes.
      
      This makes the null_init_hctx function overwrite memory outside of what
      it allocated.  In my case it lead to writing garbage into struct
      request_queue's mq_map.
      Signed-off-by: NMatias Bjorling <m@bjorling.me>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      57053d8c
    • S
      radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() · e4158f1b
      Sergey Senozhatsky 提交于
      Since commit ec39f64b ("drm/radeon/dpm: Convert to use
      devm_hwmon_register_with_groups") radeon_hwmon_init() is using
      hwmon_device_register_with_groups(), which sets `rdev' as a device
      private driver_data, while hwmon_attributes_visible() and
      radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.
      
      Fix them by using dev_get_drvdata(), in order to avoid this oops:
      
        BUG: unable to handle kernel paging request at 0000000000001e28
        IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
        PGD 15057e067 PUD 151a8e067 PMD 0
        Oops: 0000 [#1] PREEMPT SMP
        Call Trace:
          internal_create_group+0x114/0x1d9
          sysfs_create_group+0xe/0x10
          sysfs_create_groups+0x22/0x5f
          device_add+0x34f/0x501
          device_register+0x15/0x18
          hwmon_device_register_with_groups+0xb5/0xed
          radeon_hwmon_init+0x56/0x7c [radeon]
          radeon_pm_init+0x134/0x7e5 [radeon]
          radeon_modeset_init+0x75f/0x8ed [radeon]
          radeon_driver_load_kms+0xc6/0x187 [radeon]
          drm_dev_register+0xf9/0x1b4 [drm]
          drm_get_pci_dev+0x98/0x129 [drm]
          radeon_pci_probe+0xa3/0xac [radeon]
          pci_device_probe+0x6e/0xcf
          driver_probe_device+0x98/0x1c4
          __driver_attach+0x5c/0x7e
          bus_for_each_dev+0x7b/0x85
          driver_attach+0x19/0x1b
          bus_add_driver+0x104/0x1ce
          driver_register+0x89/0xc5
          __pci_register_driver+0x58/0x5b
          drm_pci_init+0x86/0xea [drm]
          radeon_init+0x97/0x1000 [radeon]
          do_one_initcall+0x7f/0x117
          load_module+0x1583/0x1bb4
          SyS_init_module+0xa0/0xaf
      Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Alexander Deucher <Alexander.Deucher@amd.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      e4158f1b
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4a251dd2
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
          figure out why it breaks things.
      
       2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
          was basically doing "x == x", from Dave Jones.
      
       3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
          Sebastian Siewior.
      
       4) Blackhole and prohibit routes in ipv6 were not doing the right thing
          because their ->input and ->output methods were not being assigned
          correctly.  Now they behave properly like their ipv4 counterparts.
          From Kamala R.
      
       5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
          really do not support this feature and will send garbage packets if
          fed fraglist SKBs.  From Eric Dumazet.
      
       6) Fix long standing user triggerable BUG_ON over loopback in RDS
          protocol stack, from Venkat Venkatsubra.
      
       7) Several not so common code paths can potentially try to invoke
          packet scheduler actions that might be NULL without checking.  Shore
          things up by either 1) defining a method as mandatory and erroring
          on registration if that method is NULL 2) defininig a method as
          optional and the registration function hooks up a default
          implementation when NULL is seen.  From Jamal Hadi Salim.
      
       8) Fix fragment detection in xen-natback driver, from Paul Durrant.
      
       9) Kill dangling enter_memory_pressure method in cg_proto ops, from
          Eric W Biederman.
      
      10) SKBs that traverse namespaces should have their local_df cleared,
          from Hannes Frederic Sowa.
      
      11) IOCB file position is not being updated by macvtap_aio_read() and
          tun_chr_aio_read().  From Zhi Yong Wu.
      
      12) Don't free virtio_net netdev before releasing all of the NAPI
          instances.  From Andrey Vagin.
      
      13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.
      
      14) IPv6 routes that are no cached routes should not count against the
          garbage collection limits.  We had this almost right, but were
          missing handling addrconf generated routes properly.  From Hannes
          Frederic Sowa.
      
      15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
          route info when they are called, from Stefan Tomanek.
      
      16) TUN and MACVTAP have had truncated packet signalling for some time,
          fix from Jason Wang.
      
      17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.
      
      18) xen-netback does not interpret the NAPI budget properly for TX work,
          fix from Paul Durrant.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
        igb: Fix for issue where values could be too high for udelay function.
        i40e: fix null dereference
        xen-netback: fix gso_prefix check
        net: make neigh_priv_len in struct net_device 16bit instead of 8bit
        drivers: net: cpsw: fix for cpsw crash when build as modules
        xen-netback: napi: don't prematurely request a tx event
        xen-netback: napi: fix abuse of budget
        sch_tbf: use do_div() for 64-bit divide
        udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
        net:fec: remove duplicate lines in comment about errata ERR006358
        Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
        8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
        xen-netback: make sure skb linear area covers checksum field
        net: smc91x: Fix device tree based configuration so it's usable
        udp: ipv4: fix potential use after free in udp_v4_early_demux()
        macvtap: signal truncated packets
        tun: unbreak truncated packet signalling
        net: sched: htb: fix the calculation of quantum
        net: sched: tbf: fix the calculation of max_size
        micrel: add support for KSZ8041RNLI
        ...
      4a251dd2
    • L
      Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 908bfda7
      Linus Torvalds 提交于
      Pull x86 fixes from Peter Anvin:
       "This is a pretty small batch:
      
        The biggest single change is to stop using EFI time services on 32-bit
        platforms.  This matches our current behavior on 64-bit platforms as
        we already had ruled them out there as being too unreliable.  Turns
        out that affects 32-bit platforms, too.
      
        One NULL pointer fix for SGI UV.
      
        Two minor build fixes, one of which only affects icc and the other
        which affects icc and future versions or nonstandard default settings
        of gcc"
      
      * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, efi: Don't use (U)EFI time services on 32 bit
        x86, build, icc: Remove uninitialized_var() from compiler-intel.h
        x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
        x86, build: Pass in additional -mno-mmx, -mno-sse options
      908bfda7
    • L
      Merge tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 9199c4ca
      Linus Torvalds 提交于
      Pull PCI updates from Bjorn Helgaas:
       "PCI device hotplug
          - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
            Wysocki)
      
        Host bridge drivers
          - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
            Helgaas)
          - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
            (Jason Gunthorpe)
      
        Miscellaneous
          - Avoid unnecessary CPU switch when calling .probe() (Alexander
            Duyck)
          - Revert "workqueue: allow work_on_cpu() to be called recursively"
            (Bjorn Helgaas)
          - Disable Bus Master only on kexec reboot (Khalid Aziz)
          - Omit PCI ID macro strings to shorten quirk names for LTO (Michal
            Marek)"
      
      * tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
        PCI: Disable Bus Master only on kexec reboot
        PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
        PCI: Omit PCI ID macro strings to shorten quirk names
        PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
        Revert "workqueue: allow work_on_cpu() to be called recursively"
        PCI: Avoid unnecessary CPU switch when calling driver .probe() method
      9199c4ca
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security · b5745c59
      Linus Torvalds 提交于
      Pull SELinux fixes from James Morris.
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
        selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
        selinux: look for IPsec labels on both inbound and outbound packets
        selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
        selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
        selinux: fix possible memory leak
      b5745c59
    • L
      Revert "selinux: consider filesystem subtype in policies" · 29b1deb2
      Linus Torvalds 提交于
      This reverts commit 102aefdd.
      
      Tom London reports that it causes sync() to hang on Fedora rawhide:
      
        https://bugzilla.redhat.com/show_bug.cgi?id=1033965
      
      and Josh Boyer bisected it down to this commit.  Reverting the commit in
      the rawhide kernel fixes the problem.
      
      Eric Paris root-caused it to incorrect subtype matching in that commit
      breaking fuse, and has a tentative patch, but by now we're better off
      retrying this in 3.14 rather than playing with it any more.
      Reported-by: NTom London <selinux@gmail.com>
      Bisected-by: NJosh Boyer <jwboyer@fedoraproject.org>
      Acked-by: NEric Paris <eparis@redhat.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Anand Avati <avati@redhat.com>
      Cc: Paul Moore <paul@paul-moore.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      29b1deb2
  3. 15 12月, 2013 3 次提交
  4. 14 12月, 2013 10 次提交
    • L
      Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm · b2077ebc
      Linus Torvalds 提交于
      Pull ARM fixes from Russell King:
       "This resolves some further issues with the dma mask changes on ARM
        which have been found by TI and others, and also some corner cases
        with the updates to the virtual to physical address translations.
      
        Konstantin also found some problems with the unwinder, which now
        performs tighter verification that the stack is valid while unwinding"
      
      * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
        ARM: fix asm/memory.h build error
        ARM: 7917/1: cacheflush: correctly limit range of memory region being flushed
        ARM: 7913/1: fix framepointer check in unwind_frame
        ARM: 7912/1: check stack pointer in get_wchan
        ARM: 7909/1: mm: Call setup_dma_zone() post early_paging_init()
        ARM: 7908/1: mm: Fix the arm_dma_limit calculation
        ARM: another fix for the DMA mapping checks
      b2077ebc
    • L
      Merge tag 'arc-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc · 2430cdd0
      Linus Torvalds 提交于
      Pull ARC fixes from Vineet Gupta:
       "These are couple of weeks old already, but I just couldn't get them to
        you earlier.
      
         - couple of fixes for recently added perf code
         - build time extable sort"
      
      * tag 'arc-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
        ARC: [perf] Fix a few thinkos
        ARC: Add guard macro to uapi/asm/unistd.h
        ARC: extable: Enable sorting at build time
      2430cdd0
    • L
      Merge tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm · 93e1585e
      Linus Torvalds 提交于
      Pull device mapper fixes from Mike Snitzer:
       "A set of device-mapper fixes for 3.13.
      
        A fix for possible memory corruption during DM table load, fix a
        possible leak of snapshot space in case of a crash, fix a possible
        deadlock due to a shared workqueue in the delay target, fix to
        initialize read-only module parameters that are used to export metrics
        for dm stats and dm bufio.
      
        Quite a few stable fixes were identified for both the thin-
        provisioning and caching targets as a result of increased regression
        testing using the device-mapper-test-suite (dmts).  The most notable
        of these are the reference counting fixes for the space map btree that
        is used by the dm-array interface -- without these the dm-cache
        metadata will leak, resulting in dm-cache devices running out of
        metadata blocks.  Also, some important fixes related to the
        thin-provisioning target's transition to read-only mode on error"
      
      * tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm array: fix a reference counting bug in shadow_ablock
        dm space map: disallow decrementing a reference count below zero
        dm stats: initialize read-only module parameter
        dm bufio: initialize read-only module parameters
        dm cache: actually resize cache
        dm cache: update Documentation for invalidate_cblocks's range syntax
        dm cache policy mq: fix promotions to occur as expected
        dm thin: allow pool in read-only mode to transition to read-write mode
        dm thin: re-establish read-only state when switching to fail mode
        dm thin: always fallback the pool mode if commit fails
        dm thin: switch to read-only mode if metadata space is exhausted
        dm thin: switch to read only mode if a mapping insert fails
        dm space map metadata: return on failure in sm_metadata_new_block
        dm table: fail dm_table_create on dm_round_up overflow
        dm snapshot: avoid snapshot space leak on crash
        dm delay: fix a possible deadlock due to shared workqueue
      93e1585e
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 1008ebb6
      Linus Torvalds 提交于
      Pull HID fixes from Jiri Kosina:
      
       - Genius Gx Imperator Keyboard regression fix (missing break in case),
         by Ben Hutchings
      
       - duplicate sysfs entry error fix for hid-sensor-hub driver, by
         Srinivas Pandruvada
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: hid-sensor-hub: fix duplicate sysfs entry error
        HID: kye: Fix missing break in kye_report_fixup()
      1008ebb6
    • R
      ARM: fix asm/memory.h build error · b713aa0b
      Russell King 提交于
      Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
      not defined:
      
      In file included from arch/arm/include/asm/page.h:163:0,
                       from include/linux/mm_types.h:16,
                       from include/linux/sched.h:24,
                       from arch/arm/kernel/asm-offsets.c:13:
      arch/arm/include/asm/memory.h: In function '__virt_to_phys':
      arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
      arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
      arch/arm/include/asm/memory.h: In function '__phys_to_virt':
      arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)
      
      Fixes: ca5a45c0 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
      Tested-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
      Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      b713aa0b
    • L
      Merge tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · ca336751
      Linus Torvalds 提交于
      Pull regulator fixes from Mark Brown:
       "A small set of driver fixes plus one larger core change which changes
        the way we check to see if we're using DT so that there aren't any
        races between deciding we're using DT and the regulator subsystem
        noticing.
      
        This makes the new support for substituting a dummy regulator and
        optional regulators work a lot better on DT systems since it ensures
        that we don't trigger probe deferral when we shouldn't which was
        causing bugs in clients"
      
      * tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: pfuze100: allow misprogrammed ID
        regulator: pfuze100: Fix address of FABID
        regulator: as3722: set the correct current limit
        regulator: core: Check for DT every time we check full constraints
        regulator: core: Replace checks of have_full_constraints with a function
      ca336751
    • L
      Merge tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap · 599eefa0
      Linus Torvalds 提交于
      Pull regmap fixes from Mark Brown:
       "Two small changes to fix some error handling and checking (both of
        which would be quite serious if the errors trigger) plus a trivial
        documentation fix"
      
      * tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
        regmap: use IS_ERR() to check clk_get() results
        regmap: make sure we unlock on failure in regmap_bulk_write
        regmap: trivial comment fix (copy'n'paste error)
      599eefa0
    • L
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 31f984d1
      Linus Torvalds 提交于
      Pull i2c fixes from Wolfram Sang:
       "Here are two simple but wanted fixes for the i2c subsystem"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: imx: Check the return value from clk_prepare_enable()
        i2c: mux: Inherit retry count and timeout from parent for muxed bus
      31f984d1
    • L
      Merge tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd · dbb022cb
      Linus Torvalds 提交于
      Pull MTD fixes from Brian Norris:
       "Two MTD fixes, for the pxa3xx-nand driver:
      
         - This driver was not ready to fully Armada 370 NAND, with
           particularly notable problems seen on flash with 2KB page sizes.
           This "compatible" entry really should have been held back until
           3.14 or later.
      
         - Fix a bug seen in rare cases on the error path of a failed probe
           attempt, where we free unallocated DMA resources"
      
      * tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd:
        mtd: nand: pxa3xx: Use info->use_dma to release DMA resources
        Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"
      dbb022cb
    • L
      Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma · f6493505
      Linus Torvalds 提交于
      Pull slave-dmaengine fixes from Vinod Koul:
       "Here is the common fixes PULL for dmaengine.
      
        Dan has been working on fixing the build issues in bunch of drivers.
        Here we have one fixing s3c24xx-dma, along with fix from Russell on
        pl08x.  Also we have Kuninori rcar dma fixes.  The s3c24xx-dma which
        was added in last merge window missed updates to usage of DMA_COMPLETE
        so converting the last driver"
      
      * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
        dma: fix build breakage in s3c24xx-dma
        Fix pl08x warnings
        rcar-hpbdma: initialise plane information when halted
        rcar-hpbdma: fixup channel busy check for double plane
        rcar-hpbdma: add max transfer size
        dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe()
        dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status
      f6493505