[ Upstream commit 8b09549c2bfd9f3f8f4cdad74107ef4f4ff9cdd7 ]

Commit fa5e084e ("vmscan: do not unconditionally treat zones that
fail zone_reclaim() as full") changed the return value of
node_reclaim().  The original return value 0 means NODE_RECLAIM_SOME
after this commit.

While the return value of node_reclaim() when CONFIG_NUMA is n is not
changed.  This will leads to call zone_watermark_ok() again.

This patch fixes the return value by adjusting to NODE_RECLAIM_NOSCAN.
Since node_reclaim() is only called in page_alloc.c, move it to
mm/internal.h.

Link: http://lkml.kernel.org/r/20181113080436.22078-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NMatthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fb1a59fae8baa3f3c69b72a87ff94fc4fa5683ec ]

Blacklist symbols in arch-defined probe-prohibited areas.
With this change, user can see all symbols which are prohibited
to probe in debugfs.

All archtectures which have custom prohibit areas should define
its own arch_populate_kprobe_blacklist() function, but unless that,
all symbols marked __kprobes are blacklisted.
Reported-by: NAndrea Righi <righi.andrea@gmail.com>
Tested-by: NAndrea Righi <righi.andrea@gmail.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lkml.kernel.org/r/154503485491.26176.15823229545155174796.stgit@devboxSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 6d7f677a2afa1c82d7fc7af7f9159cbffd5dc010 ]

When a serial port gets faulty or gets flooded with inputs, its interrupt
handler starts to work double time to get the characters to the workqueue
for the tty layer to handle them. When this busy time on the serial/tty
subsystem happens during boot, where it is also busy on the userspace
trying to initialise, some processes can continuously get preempted
and will be on hold until the interrupts subside.

The fix is to backoff on processing received characters for a specified
amount of time when an input overrun is seen (received a new character
before the previous one is processed). This only stops receive and will
continue to transmit characters to serial port. After the backoff period
is done, it receive will be re-enabled. This is optional and will only
be enabled by setting 'overrun-throttle-ms' in the dts.
Signed-off-by: NDarwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c5510b8dafce5f3f5a039c9b262ebcae0092c462 ]

If CONFIG_GPOILIB is not set, the stub of gpio_to_desc() should return
the same type of error as regular version: NULL.  All the callers
compare the return value of gpio_to_desc() against NULL, so returned
ERR_PTR would be treated as non-error case leading to dereferencing of
error value.

Fixes: 79a9becd ("gpiolib: export descriptor-based GPIO interface")
Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit fc800a10be26017f8f338bc8e500d48e3e6429d9 ]

synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.

event_trigger_write(event_mutex)
  ->trigger_process_regex(trigger_cmd_mutex)
    ->event_hist_trigger_func(synth_event_mutex)

On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.

To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.

To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.

Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devboxReviewed-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 71e67c3bd127cfe7863f54e4b087eba1cc8f9a7a ]

The FQ implementation used by mac80211 allocates memory using kmalloc(),
which can fail; and Johannes reported that this actually happens in
practice.

To avoid this, switch the allocation to kvmalloc() instead; this also
brings fq_impl in line with all the FQ qdiscs.

Fixes: 557fc4a0 ("fq: add fair queuing framework")
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191105155750.547379-1-toke@redhat.comSigned-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f6341c5af4e6e15041be39976d16deca789555fa ]

If there is an entry at INT_MAX then idr_for_each_entry() will increment
id after handling it.  This is undefined behaviour, and is caught by
UBSAN.  Adding 1U to id forces the operation to be carried out as an
unsigned addition which (when assigned to id) will result in INT_MIN.
Since there is never an entry stored at INT_MIN, idr_get_next() will
return NULL, ending the loop as expected.
Signed-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f430c7ed8bc22992ed528b518da465b060b9223f ]

Add a missing short description to the reset_control_ops documentation.
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
[p.zabel@pengutronix.de: rebased and updated commit message]
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 04e7712f4460585e5eed5b853fd8b82a9943958f upstream.

We are going to share the compat_sys_futex() handler between 64-bit
architectures and 32-bit architectures that need to deal with both 32-bit
and 64-bit time_t, and this is easier if both entry points are in the
same file.

In fact, most other system call handlers do the same thing these days, so
let's follow the trend here and merge all of futex_compat.c into futex.c.

In the process, a few minor changes have to be done to make sure everything
still makes sense: handle_futex_death() and futex_cmpxchg_enabled() become
local symbol, and the compat version of the fetch_robust_entry() function
gets renamed to compat_fetch_robust_entry() to avoid a symbol clash.

This is intended as a purely cosmetic patch, no behavior should
change.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a78986aae9b2988f8493f9f65a587ee433e83bc3 upstream.

Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis.  For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup().  But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.

This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().

Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()).  But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.

[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.plReported-by: NAdam Borowski <kilobyte@angband.pl>
Analyzed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[sean: backport to 4.x; resolve conflict in mmu.c]
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8df1d0e4a265f25dc1e7e7624ccdbcb4a6630c89 ]

add_memory() currently does not take the device_hotplug_lock, however
is aleady called under the lock from
	arch/powerpc/platforms/pseries/hotplug-memory.c
	drivers/acpi/acpi_memhotplug.c
to synchronize against CPU hot-remove and similar.

In general, we should hold the device_hotplug_lock when adding memory to
synchronize against online/offline request (e.g.  from user space) - which
already resulted in lock inversions due to device_lock() and
mem_hotplug_lock - see 30467e0b ("mm, hotplug: fix concurrent memory
hot-add deadlock").  add_memory()/add_memory_resource() will create memory
block devices, so this really feels like the right thing to do.

Holding the device_hotplug_lock makes sure that a memory block device
can really only be accessed (e.g. via .online/.state) from user space,
once the memory has been fully added to the system.

The lock is not held yet in
	drivers/xen/balloon.c
	arch/powerpc/platforms/powernv/memtrace.c
	drivers/s390/char/sclp_cmd.c
	drivers/hv/hv_balloon.c
So, let's either use the locked variants or take the lock.

Don't export add_memory_resource(), as it once was exported to be used by
XEN, which is never built as a module.  If somebody requires it, we also
have to export a locked variant (as device_hotplug_lock is never
exported).

Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NPavel Tatashin <pavel.tatashin@microsoft.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NRashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: John Allen <jallen@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit d9873969fa8725dc6a5a21ab788c057fd8719751 ]

Most other bitmap API, including the OOL version __bitmap_shift_right,
take unsigned nbits.  This was accidentally left out from 2fbad299.

Link: http://lkml.kernel.org/r/20180818131623.8755-5-linux@rasmusvillemoes.dk
Fixes: 2fbad299 ("lib: bitmap: change bitmap_shift_right to take unsigned parameters")
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: NYury Norov <ynorov@caviumnetworks.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 7275b097851a5e2e0dd4da039c7e96b59ac5314e ]

The static inlines in bitmap.h do not handle a compile-time constant
nbits==0 correctly (they dereference the passed src or dst pointers,
despite only 0 words being valid to access).  I had the 0-day buildbot
chew on a patch [1] that would cause build failures for such cases without
complaining, suggesting that we don't have any such users currently, at
least for the 70 .config/arch combinations that was built.  Should any
turn up, make sure they use the out-of-line versions, which do handle
nbits==0 correctly.

This is of course not the most efficient, but it's much less churn than
teaching all the static inlines an "if (zero_const_nbits())", and since we
don't have any current instances, this doesn't affect existing code at
all.

[1] lkml.kernel.org/r/20180815085539.27485-1-linux@rasmusvillemoes.dk

Link: http://lkml.kernel.org/r/20180818131623.8755-3-linux@rasmusvillemoes.dkSigned-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 966c37f2d77eb44d47af8e919267b1ba675b2eca ]

Similiar with ipv6 mcast commit 89225d1c ("net: ipv6: mld: fix v1/v2
switchback timeout to rfc3810, 9.12.")

i) RFC3376 8.12. Older Version Querier Present Timeout says:

   The Older Version Querier Interval is the time-out for transitioning
   a host back to IGMPv3 mode once an older version query is heard.
   When an older version query is received, hosts set their Older
   Version Querier Present Timer to Older Version Querier Interval.

   This value MUST be ((the Robustness Variable) times (the Query
   Interval in the last Query received)) plus (one Query Response
   Interval).

Currently we only use a hardcode value IGMP_V1/v2_ROUTER_PRESENT_TIMEOUT.
Fix it by adding two new items mr_qi(Query Interval) and mr_qri(Query Response
Interval) in struct in_device.

Now we can calculate the switchback time via (mr_qrv * mr_qi) + mr_qri.
We need update these values when receive IGMPv3 queries.
Reported-by: NYing Xu <yinxu@redhat.com>
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit efddff27c886e729a7f84a7205bd84d7d4af7336 ]

IRQ wake up support for MAX8997 driver was initially configured by
respective property in pdata. However, after the driver conversion to
device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD
drivers initialized from device-tree assume that they can be an irq wakeup
source, so enable it also for MAX8997. This fixes support for wakeup from
MAX8997 RTC alarm.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9f8ddee1dab836ca758ca8fc555ab5a3aaa5d3fd ]

Power button IRQ actually has a second level of interrupts to
distinguish between UI and POWER buttons. Moreover, current
implementation looks awkward in approach to handle second level IRQs by
first level related IRQ chip.

To address above issues, split power button IRQ to be chained as well.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 55143439b7b501882bea9d95a54adfe00ffc79a3 ]

When trying to read any MC13892 ADC channel on a imx51-babbage board:

The MC13892 PMIC shutdowns completely.

After debugging this issue and comparing the MC13892 and MC13783
initializations done in the vendor kernel, it was noticed that the
CHRGRAWDIV bit of the ADC0 register was not being set.

This bit is set by default after power on, but the driver was
clearing it.

After setting this bit it is possible to read the ADC values correctly.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Tested-by: NChris Healy <cphealy@gmail.com>
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 5f26bdceb9c0a5e6c696aa2899d077cd3ae93413 ]

If the CPU exits the "polling" state due to the time limit in the
loop in poll_idle(), this is not a real wakeup and it just means
that the "polling" state selection was not adequate.  The governor
mispredicted short idle duration, but had a more suitable state been
selected, the CPU might have spent more time in it.  In fact, there
is no reason to expect that there would have been a wakeup event
earlier than the next timer in that case.

Handling such cases as regular wakeups in menu_update() may cause the
menu governor to make suboptimal decisions going forward, but ignoring
them altogether would not be correct either, because every time
menu_select() is invoked, it makes a separate new attempt to predict
the idle duration taking distinct time to the closest timer event as
input and the outcomes of all those attempts should be recorded.

For this reason, make menu_update() always assume that if the
"polling" state was exited due to the time limit, the next proper
wakeup event for the CPU would be the next timer event (not
including the tick).

Fixes: a37b969a "cpuidle: poll_state: Add time limit to poll_idle()"
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit b56511c15713ba6c7572e77a41f7ddba9c1053ec ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP;
                                                    ~ ^~~~~~~~~~~~~~~~~~~~~~~

drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP;
                                                    ~ ^~~~~~~~~~~~~~~~~

The type mlx4_ib_qp_flags explicitly provides supplemental values to the
type ib_qp_create_flags. Make that clear to Clang by changing the
create_flags type to u32.
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ]

Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.

In file included from drivers/dma/ep93xx_dma.c:30:
./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                return DMA_NONE;
                ~~~~~~ ^~~~~~~~
1 warning generated.
Reported-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NNathan Chancellor <natechancellor@gmail.com>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ]

Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.
Signed-off-by: NTrond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 3b8720e63f4a1fc6f422a49ecbaa3b59c86d5aaf upstream.

It's dead code ever since

commit 34280340
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date:   Fri Dec 4 17:01:43 2015 +0100

    fbdev: Remove unused SH-Mobile HDMI driver

Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.chSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6b58859419554fb824e09cfdd73151a195473cbc ]

We observe an oops in the skx_edac module during boot:

  EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0
  EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC2: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  ...
  EDAC MC13: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1
  EDAC MC14: Giving out device to module skx_edac controller Skylake Socket#1 IMC#0
  EDAC MC15: Giving out device to module skx_edac controller Skylake Socket#1 IMC#1
  Too many memory controllers: 16
  EDAC MC: Removed device 0 for skx_edac Skylake Socket#0 IMC#0

We observe there are two memory controllers per socket, with a limit
of 16. Raise the maximum number of memory controllers from 16 to 2 *
MAX_NUMNODES (1024).

[ bp: This is just a band-aid fix until we've sorted out the whole issue
  with the bus_type association and handling in EDAC and can get rid of
  this arbitrary limit. ]
Signed-off-by: NJustin Ernst <justin.ernst@hpe.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NRuss Anderson <russ.anderson@hpe.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-edac@vger.kernel.org
Link: https://lkml.kernel.org/r/20180925143449.284634-1-justin.ernst@hpe.comSigned-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 52a42c2a90226dc61c99bbd0cb096deeb52c334b ]

Avoid going from struct page to virt address (and back) by just
keeping pointer to the allocated pages instead of virt address.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit c785896b21dd8e156326ff660050b0074d3431df ]

The table id (second) argument to MODULE_DEVICE_TABLE is often
referenced otherwise. This is not the case for CPU features. This
leads to warnings when building the kernel with Clang:
  arch/arm/crypto/aes-ce-glue.c:450:1: warning: variable
    'cpu_feature_match_AES' is not needed and will not be emitted
    [-Wunneeded-internal-declaration]
  module_cpu_feature_match(AES, aes_init);
  ^

Avoid warnings by using __maybe_unused, similar to commit 1f318a8b
("modules: mark __inittest/__exittest as __maybe_unused").

Fixes: 67bad2fd ("cpu: add generic support for CPU feature based module autoloading")
Signed-off-by: NStefan Agner <stefan@agner.ch>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit a5e9f557098e54af44ade5d501379be18435bfbf ]

In commit 9f480fae ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment.  So, while my commit didn't break anything, it didn't fully
solve the alignment problems.

Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.

But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.
Reported-by: NStephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 53dd9dce6979bc54d64a3a09a2fb20187a025be7 ]

The next update of libfdt has a new dependency on INT_MAX. Update the
instances of libfdt_env.h in the kernel to either include the necessary
header with the definition or define it locally.

Cc: Russell King <linux@armlinux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9b2798d5b71c50f64c41a40f0cbcae47c3fbd067 ]

YCbCr planar formats can have different pitch values for the luma and
chroma planes. This isn't taken into account in the driver. Fix it.

Based on a BSP patch from Koji Matsuoka <koji.matsuoka.xm@renesas.com>.

Fixes: 7863ac50 ("drm: rcar-du: Add tri-planar memory formats support")
[Updated documentation of the struct vsp1_du_atomic_config pitch field]
Signed-off-by: NKoji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NKieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 9708d2b5b7c648e8e0a40d11e8cea12f6277f33c ]

llc_sap_close() is called by llc_sap_put() which
could be called in BH context in llc_rcv(). We can't
block in BH.

There is no reason to block it here, kfree_rcu() should
be sufficient.
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff28915fd31ccafc0d38e6f84b66df280ed9e86a ]

include/trace/events/sched.h includes <linux/sched.h> (via
<linux/sched/numa_balancing.h>) and so knows about the TASK_* constants
used to interpret .prev_state. So instead of duplicating the magic
numbers make use of the defined macros to ease understanding the
mapping from state bits to letters which isn't completely intuitive for
an outsider.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/20180905093636.24068-1-u.kleine-koenig@pengutronix.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit ff8648f29fe58c2d94d32a076d2de7b92be4b485 ]

Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.
Signed-off-by: NKurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit aa7e80b220f3a543eefbe4b7e2c5d2b73e2e2ef7 ]

The field atomic_mode is 4 bits wide and therefore can hold values
from 0x0 to 0xf. Remove the unnecessary 20 bit shift that made the values
be incorrect. While that, remove unused enum values.

Fixes: 57cda166 ("net/mlx5: Add DCT command interface")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 33e26418193f58d1895f2f968e1953b1caf8deb7 ]

get_seconds() and do_gettimeofday() are only used by a few modules now any
more (waiting for the respective patches to get accepted), and they are
among the last holdouts of code that is not y2038 safe in the core kernel.

Move the implementation into the timekeeping32.h header to clean up
the core kernel and isolate the old interfaces further.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSasha Levin <sashal@kernel.org>

[ Upstream commit 13136a47a061c01c91df78b37f7708dd5ce7035f ]

Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table and the AO_HV pad.
Signed-off-by: NAapo Vienamo <avienamo@nvidia.com>
Acked-by: NJon Hunter <jonathanh@nvidia.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>

commit 4e7120d79edb31e4ee68e6f8421448e4603be1e9 upstream.

For both PASID-based-Device-TLB Invalidate Descriptor and
Device-TLB Invalidate Descriptor, the Physical Function Source-ID
value is split according to this layout:

PFSID[3:0] is set at offset 12 and PFSID[15:4] is put at offset 52.
Fix the part laid out at offset 52.

Fixes: 0f725561 ("iommu/vt-d: Add definitions for PFSID")
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Acked-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org # v4.19+
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c57c80467f90e5504c8df9ad3555d2c78800bf94 upstream.

Add a function to create a kernel thread associated with a given VM. In
particular, it ensures that the worker thread inherits the priority and
cgroups of the calling thread.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0d9ce162cf46c99628cc5da9510b959c7976735b upstream.

It doesn't seem as if there is any particular need for kvm_lock to be a
spinlock, so convert the lock to a mutex so that sleepable functions (in
particular cond_resched()) can be called while holding it.
Signed-off-by: NJunaid Shahid <junaids@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 833b45de69a6016c4b0cebe6765d526a31a81580 upstream.

The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed.  Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: kvm-ppc@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 731dc9df975a5da21237a18c3384f811a7a41cc6 upstream.

A kernel module may need to check the value of the "mitigations=" kernel
command line parameter as part of its setup when the module needs
to perform software mitigations for a CPU flaw.

Uninline and export the helper functions surrounding the cpu_mitigations
enum to allow for their usage from a module.

Lastly, privatize the enum and cpu_mitigations variable since the value of
cpu_mitigations can be checked with the exported helper functions.
Signed-off-by: NTyler Hicks <tyhicks@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

commit db4d30fbb71b47e4ecb11c4efa5d8aad4b03dfae upstream.

Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:

   https://bugzilla.kernel.org/show_bug.cgi?id=205195

There are other processors affected for which the erratum does not fully
disclose the impact.

This issue affects both bare-metal x86 page tables and EPT.

It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.

Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.
Signed-off-by: NVineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: NPawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>