- 02 12月, 2006 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 10月, 2006 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Address http://bugzilla.kernel.org/show_bug.cgi?id=7189 It should check `clen', not `len'. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: <jurij@wooyd.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: <stable@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 8月, 2006 1 次提交
-
-
由 Antonino A. Daplas 提交于
The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 7月, 2006 1 次提交
-
-
由 Jon Smirl 提交于
MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: NJon Smirl <jonsmir@gmail.com> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 27 6月, 2006 10 次提交
-
-
由 Greg Kroah-Hartman 提交于
Also fixes up all files that #include it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Removes the devfs_remove() function and all callers of it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Removes the devfs_mk_cdev() function and all callers of it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
Removes the devfs_mk_dir() function and all callers of it. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Antonino A. Daplas 提交于
The control for binding/unbinding is moved from fbcon to the console layer. Thus the fbcon sysfs attributes, attach and detach, are also gone. 1. Add a notifier event that tells fbcon if a framebuffer driver has been unregistered. If no registered driver remains, fbcon will unregister itself from the console layer. 2. Replaced calls to give_up_console() with unregister_con_driver(). 3. Still use take_over_console() instead of register_con_driver() to maintain compatibility 4. Respect the parameter first_fb_vc and last_fb_vc instead of using 0 and MAX_NR_CONSOLES - 1. These parameters are settable by the user. 5. When fbcon is completely unbound from the console layer, fbcon will also release (iow, decrement module reference counts to zero) all fbdev drivers. In other words, a bind or unbind request from the console layer will propagate down to the framebuffer drivers. 6. If fbcon is not bound to the console, it will ignore all notifier events (except driver registration and unregistration) and all sysfs requests. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
In order for this feature to work, an interface will be needed. The most appropriate is sysfs. However, the framebuffer console has no sysfs entry yet. This will create a sysfs class device entry for fbcon under /sys/class/graphics. Add a class_device entry 'fbcon' under class 'graphics'. Console-specific attributes which where previously under class/graphics/fb[x] are moved to class/graphics/fbcon. These attributes, 'con_rotate' and 'con_rotate_all', are also renamed to 'rotate' and 'rotate_all' respectively. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Logo drawing crashes or produces a corrupt display if the logo width and height are not equal. The dimensions are transposed prior to the actual rotation and the width is used instead of the height in the actual rotation code. These produce a corrupt image. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
This patch removes the following unused EXPORT_SYMBOL's: - fbcvt.c: fb_find_mode_cvt - fbmem.c: fb_con_duit - fbmem.c: fb_new_modelist - macmodes.c: mac_var_to_vmode - modedb.c: fb_delete_videomode - modedb.c: fb_destroy_modelist Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
A static pseudocolor visual with depth less than 4 does exist, so let's not accidentally upscale the depth with this configuration Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Remove unneeded duplicate #include's of the same header file. In the case of fbmon.c linux/pci.h is now #include'd unconditional, but this should be safe. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 4月, 2006 1 次提交
-
-
由 Antonino A. Daplas 提交于
Fix return code of fb_write(): If at least 1 byte was transferred to the device, return number of bytes, otherwise: - return -EFBIG - if file offset is past the maximum allowable offset or size is greater than framebuffer length - return -ENOSPC - if size is greater than framebuffer length - offset Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 4月, 2006 1 次提交
-
-
由 Antonino A. Daplas 提交于
Since the visual STATIC_PSEUDOCOLOR has a read-only colormap, use logos with 16 colors only since these logos use the console palette. This has a higher likelihood that the logo will display correctly. Signed-of-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 4月, 2006 1 次提交
-
-
由 OGAWA Hirofumi 提交于
The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 3月, 2006 1 次提交
-
-
由 Alan Stern 提交于
The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 3月, 2006 1 次提交
-
-
由 David S. Miller 提交于
Make sure the callers do a pgprot_noncached() on vma->vm_page_prot. Pointed out by Hugh Dickens. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 2月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
drivers/video/fbmem.c:1567: warning: 'video_setup' defined but not used Acked-by: N"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 1月, 2006 2 次提交
-
-
由 Christoph Hellwig 提交于
No need for a file argument. If we'd really need it it's in vma->vm_file already. gbefb and sgivwfb used to set vma->vm_file to the file argument, but the kernel alrady did that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christoph Hellwig 提交于
The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 1月, 2006 2 次提交
-
-
由 Thomas Koeller 提交于
While the code in fbmem.c allows for hooking read/write access to non-linear frame buffers by means of fb_read and fb_write in struct fb_ops, I could not find a way tho access the actual frame buffer memory from within these routines. I therefore had to patch fbmem.c, to be able to retrieve a pointer to struct fb_info from the 'file' argument to these functions. The second hunk of the patch is not strictly required, I only did that for symmetry reasons (and the code is somewhat shorter). Signed-off-by: NThomas Koeller <thomas@koeller.dyndns.org> Acked-by: N"Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Make fb_read() and fb_write() return 0 (EOF) instead of -ENOSPC if reading at or past the end of the framebuffer. This fixes user space apps hanging if info->fix.smem_len == 0. Whitespace changes. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 13 12月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
- Fix fb_pan_display rejecting yoffsets that are valid if panning mode is ywrap. - Add more robust error checking in fb_pan_display specially since this function is accessible by userland apps. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 11月, 2005 1 次提交
-
-
由 Jasper Spaans 提交于
This code fixes a tiny problem with the recent fbcon rotation changes: fb_prepare_logo doesn't check the return value of fb_find_logo and that causes a crash for my while booting. Obvious & working & tested fix is here. Signed-off-by: NJasper Spaans <jasper@vs19.net> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 11月, 2005 3 次提交
-
-
由 Arnd Bergmann 提交于
The frame buffer layer already had some code dealing with compat ioctls, this patch moves over the remaining code from fs/compat_ioctl.c Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Add ability to set rotation via sysfs. The attributes are located in /sys/class/graphics/fb[n] and accepts 0 - unrotated; 1 - clockwise; 2 - upside down; 3 - counterclockwise. The attributes are: con_rotate (r/w) - set rotation of the active console con_rotate_all (w) - set rotation of all consoles rotate (r/w) - set rotation of the framebuffer, if supported. Currently, none of the drivers support this. This is probably temporary, since con_rotate and con_rotate_all are console-specific and has no business being under the fb device. However, until the console layer acquires it's own sysfs class, these attributes will temporarily reside here. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Add support for rotating and positioning of the logo. Rotation and position depends on 'int rotate' parameter added to fb_prepare_logo() and fb_show_logo(). Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 2 次提交
-
-
由 Roland Dreier 提交于
Change the phys_mem_access_prot() function to take a pfn instead of an address. This allows mmap64() to work on /dev/mem for addresses above 4G on 32-bit architectures. We start with a pfn in mmap_mem(), so there's no need to convert to an address; in fact, it's actively bad, since the conversion can overflow when the address is above 4G. Similarly fix the ppc32 page_is_ram() function to avoid a conversion to an address by directly comparing to max_pfn. Working with max_pfn instead of high_memory fixes page_is_ram() to give the right answer for highmem pages. Signed-off-by: NRoland Dreier <rolandd@cisco.com> Cc: Anton Blanchard <anton@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Greg Kroah-Hartman 提交于
The previous patch adding the ability to nest struct class_device changed the paramaters to the call class_device_create(). This patch fixes up all in-kernel users of the function. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 9月, 2005 4 次提交
-
-
由 Antonino A. Daplas 提交于
The function bit_putcs() in drivers/video/console/bitblit.c is becoming large. Break it up into its component functions (bit_putcs_unaligned and bit_putcs_aligned). Incorporated fb_pad_aligned_buffer() optimization by Roman Zippel. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
The Coordinated Video Timings (CVT) is the latest standard approved by VESA concerning video timings generation. It addresses the limitation of GTF which is designed mainly for CRT displays. CRT's have a high blanking requirement (as much as 25% of the horizontal frame length) which artificially increases the pixelclock. Digital displays, on the other hand, needs to conserve the pixelclock as much as possible. The GTF also does not take into account the different aspect ratios in its calculation. The new function added is fb_find_mode_cvt(). It is called by fb_find_mode() if it recognizes a mode option string formatted for CVT. The format is: <xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m] The 'M' tells the function to calculate using CVT. On it's own, it will compute a timing for CRT displays at 60Hz. If the 'R' is specified, 'reduced blanking' computation will be used, best for flatpanels. The 'i' and the 'm' is for 'interlaced mode' and 'with margins' respectively. To determine if CVT was used, check for dmesg for something like this: CVT Mode - <pix>M<n>[-R], ie: .480M3-R (800x600 reduced blanking) where: pix - product of xres and yres, in MB M - is a CVT mode n - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10) -R - reduced blanking Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Currently, fbcon assumes that the visual FB_VISUAL_MONO* is always 1 bit. According to Geert, there are old hardware where it's possible to have monochrome at 8-bit, but has only 2 colors, black - 0x00 and white - 0xff. Fix color handlers (fb_get_color_depth, and get_color) for this special case. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Add capability to fbdev to listen to the FB_ACTIVATE_ALL flag. If set, it notifies fbcon that all consoles must be set to the current var. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 8月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
Reported by: Pavel Kysilka (Bugzilla Bug 5059) The intelfb driver does not keep resolution set with fbset after switching to anot console and back. Steps to reproduce: initial options: tty1,tty2 - 1024x768-60 1) tty1 - fbset after booting (1024x768-60) 2) tty1 - fbset 800x600-100 tty1: 800x600-100 3) swith to tty2, swith to tty1 tty1: 1024x768-60 (the same resolution as default from kernel booting) This bug is caused by intelfb unintentionally destroying info->flags in set_par(). Therefore the flag, FBINFO_MISC_USEREVENT used to notify fbcon of a mode change was cleared causing the above problem. This bug though is not intelfb specific, as other drivers may also be affected. The fix is to save info->flags in a local variable before calling any of the driver hooks. A more definitive fix (for post 2.6.13) is to separate info->flags into one that is set by the driver and another that is set by core fbdev/fbcon. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 7月, 2005 1 次提交
-
-
由 Antonino A. Daplas 提交于
Do not use memcpy in fb_pad_aligned_buffer. It is suboptimal because only a few bytes are moved at a time. Replace with a for-loop. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 7月, 2005 1 次提交
-
-
由 Jon Smirl 提交于
fbdev is missing unregister_chrdev() on unload. Signed-off-by: NJon Smirl <jonsmirl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 22 6月, 2005 1 次提交
-
-
由 James Simmons 提交于
Several drivers miss filling in the access_align field. So this patch has them fill it in. Signed-off-by: NJames Simmons <jsimmons@www.infradead.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-