This is currently unused.

If a suspend must be limited to CPU level only by preventing the last man
from triggering a cluster level suspend then this should be determined
according to many other criteria the MCPM layer is currently not aware of.
It is unlikely that mcpm_cpu_suspend() would be the proper conduit for
that information anyway.
Signed-off-by: NNicolas Pitre <nico@linaro.org>
Acked-by: NDave Martin <Dave.Martin@arm.com>

Exynos has been (ab)using the gic_arch_extn to provide
wakeup from suspend, and it makes a lot of sense to convert
this code to use stacked domains instead.

This patch does just this, updating the DT files to actually
reflect what the HW provides.

BIG FAT WARNING: because the DTs were so far lying by not
exposing the fact that the PMU block is actually the first
interrupt controller in the chain for RTC, kernels with this patch
applied wont have any suspend-resume facility when booted
with old DTs, and old kernels with updated DTs may not even boot.

Also, I strongly suspect that there is more than two wake-up
interrupts on these platforms, but I leave it to the maintainers
to fix their mess.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1426088693-15724-2-git-send-email-marc.zyngier@arm.com
[ jac: squash in maz's fixup from
  https://lkml.kernel.org/r/5506989D.9050703@arm.com ]
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Since 32b0aa9a ("ARM: EXYNOS: Remove i2c sys configuration related
code") the Exynos 5250 no longer saves additional registers under
'exynos_pm_data.extra_save' field.

No one else uses this code so get rid of it making also 'exynos_pm_data'
const everywhere.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

The 'exynos5420_pm_data' is not modified and can be made const.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

The 'pm_data', 'exynos_release_ret_regs', 'exynos3250_release_ret_regs'
and 'exynos5420_release_ret_regs' are not exported nor used outside of
suspend.c file. Make them static.

This fixes following sparse warnings:
arch/arm/mach-exynos/suspend.c:83:23: warning: symbol 'pm_data' was not declared. Should it be static?
arch/arm/mach-exynos/suspend.c:106:14: warning: symbol 'exynos_release_ret_regs' was not declared. Should it be static?
arch/arm/mach-exynos/suspend.c:117:14: warning: symbol 'exynos5420_release_ret_regs' was not declared. Should it be static?
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

This patch fixes wrong hwirq of RTC irq for Exynos3250 SoC. When entering
suspend state, 'enable_irq_wake fail' happen because of the mismatch of RTC hwirq.

[  429.200937] Freezing user space processes ... (elapsed 0.002 seconds) done.
[  429.203383] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  429.209914] Suspending console(s) (use no_console_suspend to debug)
[  429.370685] wake enabled for irq 65
[  429.370837] wake enabled for irq 64
[  429.370868] wake enabled for irq 79
...
[  429.372120] s3c-rtc 10070000.rtc: enable_irq_wake failed

Fixes: a4f582f5 (ARM: EXYNOS: Add exynos3250 suspend-to-ram support)
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

of_device_ids (i.e. compatible strings and the respective data) are not
supposed to change at runtime. All functions working with of_device_ids
provided by <linux/of.h> work with const of_device_ids. So mark the
non-const structs in arch/arm as const, too.

While at it also add some __initconst annotations.
Acked-by: NJason Cooper <jason@lakedameon.net>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Commit c2dd114d ("ARM: EXYNOS: fix register setup for AFTR mode
code") added S5P_CENTRAL_SEQ_OPTION register setup fix for all
Exynos SoCs to AFTR mode code-path.  It turned out that for coupled
cpuidle AFTR mode on Exynos4210 (added by the next patch) applying
this fix causes lockup so enable it in the AFTR mode code-path only
on SoCs that require it (in the suspend code-path it can be always
applied like it was before commit c2dd114d ("ARM: EXYNOS: fix
register setup for AFTR mode code")

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Colin Cross <ccross@google.com>
Cc: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

This patch supports suspend-to-ram for Exynos3250 SoC
and the SoC doesn't contain L2 cache.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

As all these code has been moved into i2c driver, now we can
safely remove them from machine files.

CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: NKukjin Kim <kgene@kernel.org>

The regulator framework has a set of helpers functions to be used when
the system is entering and leaving from suspend but these are not called
on Exynos platforms. This means that the .set_suspend_* function handlers
defined by regulator drivers are not called when the system is suspended.
Suggested-by: NDoug Anderson <dianders@chromium.org>
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: NDoug Anderson <dianders@chromium.org>
Reviewed-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use the MCPM layer to handle core suspend/resume on Exynos5420.
Also, restore the entry address setup code post-resume.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Acked-by: NNicolas Pitre <nico@linaro.org>
Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Adds Suspend-to-RAM support for EXYNOS5420
Signed-off-by: NVikas Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch moves PMU specific definitions into a new file
as exynos-pmu.h.
This will help in reducing dependency of common.h in pmu.c.
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fix building of exynos_defconfig with CONFIG_PM_SLEEP disabled and
CONFIG_ARM_EXYNOS_CPUIDLE enabled by:

* adding EXYNOS_CPU_SUSPEND config option
* always building sleep.o
* building pm.o if EXYNOS_CPU_SUSPEND is enabled
* moving suspend specific code from pm.c to suspend.c
* enabling pm-common.o build also for EXYNOS_CPU_SUSPEND option

[ Please note that there are no changes in the code moved from pm.c
  to suspend.c except making few functions non-static and cleaning
  up includes. ]

Also while at it update Copyright dates.

The build error messages:
drivers/built-in.o: In function `exynos_enter_core0_aftr':
/home/bzolnier/linux/drivers/cpuidle/cpuidle-exynos.c:36: undefined reference to `cpu_suspend'
arch/arm/mach-exynos/built-in.o:(.data+0x74): undefined reference to `exynos_enter_aftr'
make: *** [vmlinux] Error 1

This patch has been tested on Exynos4210 based Origen board.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add S5P_CENTRAL_SEQ_OPTION register setup to cpuidle AFTR mode code
by moving the relevant code from exynos_pm_suspend() (used only by
suspend) to exynos_pm_central_suspend() (used by both suspend and
AFTR).  Without this setup AFTR mode doesn't show any benefit over
WFI one (at least on Exynos4412 SoC).  When this setup is applied
AFTR mode reduces power consumption by ~12% (as measured on Trats2
board).

This change is a preparation for adding secure firmware support to
EXYNOS cpuidle driver.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

* Move cp15 registers saving to exynos_save_cp15() helper and add
  additional helper usage to do_idle firmware method.

* Use resume firmware method instead of exynos_cpu_restore_register()
  and skip exynos_cpu_save_register() on boards with secure firmware
  enabled.

* Use sysram_ns_base_addr + 0x24/0x20 addresses instead of the default
  ones used by exynos_cpu_set_boot_vector() on boards with secure
  firmware enabled.

* Use do_idle firmware method instead of cpu_do_idle() on boards with
  secure firmware enabled.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Replace EXYNOS_BOOT_VECTOR_ADDR and EXYNOS_BOOT_VECTOR_FLAG macros
by exynos_boot_vector_addr() and exynos_boot_vector_flag() static
inlines.

This patch shouldn't cause any functionality changes.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

On a numer of Exynos-based boards Linux kernel is running in non-secure
mode under a secure firmware. This means that certain operations need to
be handled in special way, with firmware assistance. System-wide
suspend/resume is an example of such operations.

This patch adds support for firmware-assisted suspend/resume by
leveraging recently introduced suspend and resume firmware operations
and modifying existing suspend/resume paths to account for presence of
secure firmware.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
[kgene.kim@samsung.com: rebased]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Refactoring the pm.c to avoid using "soc_is_exynos" checks,
instead use the DT based lookup.

While at it, consolidate the common code across SoCs
and create static helper functions.
Signed-off-by: NVikas Sajjan <vikas.sajjan@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Move the Disabling of JPEG USE_RETENTION for exynos5250 to pmu.c to
make way for refactoring of pm.c and to create common functions across
exynos4 and exynos5250.
Signed-off-by: NVikas Sajjan <vikas.sajjan@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Due to recent consolidation of Exynos suspend and cpuidle code, some
parts of suspend and resume sequences are executed two times, once from
exynos_pm_syscore_ops and then from exynos_cpu_pm_notifier() and thus it
breaks suspend, at least on Exynos4-based boards. In addition, simple
core power down from a cpuidle driver could, in case of CPU 0 could
result in calling functions that are specific to suspend and deeper idle
states.

This patch fixes the issue by moving those operations outside the CPU PM
notifier into suspend and AFTR code paths. This leads to a bit of code
duplication, but allows additional code simplification, so in the end
more code is removed than added.

Fixes: 85f9f908 ("ARM: EXYNOS: Use the cpu_pm notifier for pm")
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: arm@kernel.org
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
[b.zolnierkie: ported patch over current changes]
[b.zolnierkie: fixed exynos_aftr_finisher() return value]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Under "arm/mach-exynos" many files are using PMU register offsets.
Since we have added support for accessing PMU base address via DT,
now we can remove PMU mapping from exynosX_iodesc. Let's convert
all these access using iomapped address.
This will help us in removing static mapping of PMU base address
as well as help in reducing dependency over machine header files.
Thus helping for migration of PMU implementation from machine to
driver folder which can be reused for ARM64 based SoC.

Also as we have removed static mappings from "regs-pmu.h" it does
not need map.h anymore. But "platsmp.c" needed this and till now it
got included indirectly. So lets move header inclusion of
"mach/map.h" from "regs-pmu.h" to "platsmp.c".
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Fix building of exynos_defconfig with disabled PM_SLEEP:
CONFIG_PM_SLEEP=n
CONFIG_PM_SLEEP_SMP=n
CONFIG_SUSPEND=n
by moving functions for power up/down of CPU and cluster to platsmp.c

The build error messages:
arch/arm/mach-exynos/built-in.o: In function `exynos_boot_secondary':
arch/arm/mach-exynos/platsmp.c:111: undefined reference to `exynos_cpu_power_state'
arch/arm/mach-exynos/platsmp.c:112: undefined reference to `exynos_cpu_power_up'
arch/arm/mach-exynos/platsmp.c:116: undefined reference to `exynos_cpu_power_state'
make: *** [vmlinux] Error 1
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>,
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Since S5PV210 now has a complete clock driver using Common Clock
Framework, there is no reason to keep the old code. Remove it together
with the whole legacy Samsung-specific clock framework which no longer
has any users.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Ensure that platform maintainers check the CPU part number in the right
manner: the CPU part number is meaningless without also checking the
CPU implement(e|o)r (choose your preferred spelling!)  Provide an
interface which returns both the implementer and part number together,
and update the definitions to include the implementer.

Mark the old function as being deprecated... indeed, using the old
function with the definitions will now always evaluate as false, so
people must update their un-merged code to the new function.  While
this could be avoided by adding new definitions, we'd also have to
create new names for them which would be awkward.
Acked-by: NNicolas Pitre <nico@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

While making PMU implementation to be device tree based, there are
few register offsets related with SYSREG present in regs-pmu.h, so
let's make a new header file "regs-sys.h" to keep all such SYSREG
related register offsets and remove them from "regs-pmu.h"
Signed-off-by: NPankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

We have an soc check to ensure that the scu and certain A9 specific
registers are not accessed on Exynos5250 (which is A15 based).
Rather than adding another soc specific check for 5420 let us test
for the Cortex A9 primary part number.

This resolves the below crash seen on exynos5420 during core switching
after the CPUIdle consolidation series was merged.

[  155.975589] [<c0013174>] (scu_enable) from [<c001b0dc>] (exynos_cpu_pm_notifier+0x80/0xc4)
[  155.983833] [<c001b0dc>] (exynos_cpu_pm_notifier) from [<c003c1b0>] (notifier_call_chain+0x44/0x84)
[  155.992851] [<c003c1b0>] (notifier_call_chain) from [<c007a49c>] (cpu_pm_notify+0x20/0x3c)
[  156.001089] [<c007a49c>] (cpu_pm_notify) from [<c007a564>] (cpu_pm_exit+0x20/0x38)
[  156.008635] [<c007a564>] (cpu_pm_exit) from [<c0019e98>] (bL_switcher_thread+0x298/0x40c)
[  156.016788] [<c0019e98>] (bL_switcher_thread) from [<c003842c>] (kthread+0xcc/0xe8)
[  156.024426] [<c003842c>] (kthread) from [<c000e438>] (ret_from_fork+0x14/0x3c)
[  156.031621] Code: ea017fec c0530a00 c052e3f8 c0012dcc (e5903000
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

A look at the code reveals use of S5P_VA_SYSRAM macro, in case of certain SoC
revisions, which is not valid any longer, after SYSRAM started to be mapped
dynamically. The new dynamic mapping is stored in sysram_base_addr variable,
which is declared static in platsmp.c

This fix makes sysram_base_addr non-static, declared it in common.h and used
in pm.c instead of S5P_VA_SYSRAM.
Suggested-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This macro is only used there.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The code to initiate and exit the powerdown sequence is the same in
pm.c and cpuidle.c.

Let's split the common part in the pm.c and reuse it from the cpu_pm notifier.

That is one more step forward to make the cpuidle driver arch indenpendant.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

In order to remove depedency on pm code, let's move the 'exynos_enter_aftr'
function into the pm.c file as well as the other helper functions.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The scu_enable function is already a noop in the scu's header file is
CONFIG_SMP=n, so no need to use these macros in the code.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

We make the cpuidle code less arch dependent.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Use the cpu_pm_enter/exit notifier to group some pm code inside the
pm file.

The save and restore code is duplicated across pm.c and cpuidle.c. By
using the cpu_pm notifier, we can factor out the routine.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

That makes the code cleaner and encapsulted. The function will be
reused in the next patch.
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Exynos specific macros and declarations have been moved to
mach-exynos. Inclusion of plat/cpu.h is no more necessary.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: NTomasz Figa <t.figa@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add generic cluster power control functions for exynos based SoCS
for cluster power up/down and to know the cluster status.
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add generic cpu power control functions for exynos based
SoCS for cpu power up/down and to know the cpu status.
Signed-off-by: NLeela Krishna Amudala <leela.krishna@linaro.org>
Signed-off-by: NAbhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

This patch restores the ability to receive wake-up events from internal
GIC interrupts, e.g. RTC tick or alarm interrupts.
Signed-off-by: NTomasz Figa <t.figa@samsung.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>