Must wait for SERDES idle before exiting RLC SAFEMODE
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The maximum OD percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements mclk OverDrive(OD) through sysfs.
The new entry pp_mclk_od is read/write. The value of input/output
is an integer of the overclocking percentage.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch makes powercontainment feature configurable. Currently, the
powercontainment is not very stable, so add a module parameter to
enable/disable it via user mode.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the job reference counting and just properly destroy it from a
work item which blocks on any potential running timeout handler.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise the locking becomes rather confusing.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The driver shouldn't mess with the scheduler internals.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remembering the code path in a variable to cleanup
differently is usually not a good idea at all.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Ther should be a new line between code and decleration.
Also use amdgpu_ib_free() instead of releasing the member manually.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need for double housekeeping here.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Completely pointless and confusing to use a callback
to call into the same code file.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: fix even more
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMonk.Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends OD (OverDrive) support to the non-Powerplay code paths.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This extends dpm clock level selection to the non-powerplay code paths.
This interface can be used to select individual clock levels.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Based on Alex's patches this enables GFX PG on CZ.

Tested with xonotic-glx/glxgears/supertuxkart and idle desktop.
Also read-back registers via umr for verificiation that the bits
are truly enabled.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the logic for enabling/disabling.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements powergating support for CZ/ST asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add some new GFX powergating flags.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So they can be shared with other asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This sets up the CP jump table and GDS buffer and sets the
PG state registers.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The size needs to handle the CP JT and GDS.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The size needs to handle the CP JT and GDS.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Polaris10,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Tonga,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This implements sclk overdrive(OD) overclocking support for Fiji,
and the maximum overdrive percentage is 20.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a new sysfs entry pp_sclk_od to support sclk overdrive(OD) overclocking,
the entry is read/write, the value of input/output is an integer which is the
over percentage of the highest sclk.

v2: drop extra semicolon
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NEric Huang <JinHuiEric.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This may fix stability issues on some newer CI parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This may fix stability issues on some newer SI parts.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power tables on some variants require different firmware.
This fixes stability issues on some newer CI parts.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=91880Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This help fix reloading driver hang issue of SDMA
ring.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'asoc-hdmi-codec-pdata' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into drm-next

ASoC: Add private data for HDMI CODEC callbacks

Allow the HDMI CODECs to get private data passed in in callbacks.

[airlied:
Add STI/mediatek patches from Arnd for drivers merged later in drm tree.]
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* tag 'asoc-hdmi-codec-pdata' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: hdmi-codec: callback function will be called with private data

The patchset contains a new helper in drm_fb_cma_helper.c for suspend/
resume when using cma backed framebuffers.

* 'for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
  drm/fsl-dcu: disable vblank events on CRTC disable
  drm/fsl-dcu: implement suspend/resume using atomic helpers
  drm/fsl-dcu: use clk helpers
  drm/fsl-dcu: move layer initialization to plane file
  drm/fsl-dcu: store layer registers in soc_data
  drm/fb_cma_helper: add suspend helper

Linux 4.7-rc5

The fsl-dcu pull needs -rc3 so go to -rc5 for now.

Merge branch 'sti-drm-next-2016-06-30' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

This pull request include 3 minors fix and one feature evolution
around ASoC hdmi codec support.

* 'sti-drm-next-2016-06-30' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm: sti: Add ASoC generic hdmi codec support.
  drm/sti: adjust delay for AWG
  drm: sti: fix clocking issues in crtc
  drm/sti: Use 64-bit timestamps

Add the interface needed by audio hdmi-codec driver.
Signed-off-by: NArnaud Pouliquen <arnaud.pouliquen@st.com>