Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 161
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 01 8月, 2015 1 次提交
    • S
      ARM: 8392/3: smp: Only expose /sys/.../cpuX/online if hotpluggable · 787047ee
      由 Stephen Boyd 提交于 
      Writes to /sys/.../cpuX/online fail if we determine the platform
doesn't support hotplug for that CPU. Furthermore, if the cpu_die
op isn't specified the system hangs when we try to offline a CPU
and it comes right back online unexpectedly. Let's figure this
stuff out before we make the sysfs nodes so that the online file
doesn't even exist if it isn't (at least sometimes) possible to
hotplug the CPU.

Add a new 'cpu_can_disable' op and repoint all 'cpu_disable'
implementations at it because all implementers use the op to
indicate if a CPU can be hotplugged or not in a static fashion.
With PSCI we may need to add a 'cpu_disable' op so that the
secure OS can be migrated off the CPU we're trying to hotplug.
In this case, the 'cpu_can_disable' op will indicate that all
CPUs are hotpluggable by returning true, but the 'cpu_disable' op
will make a PSCI migration call and occasionally fail, denying
the hotplug of a CPU. This shouldn't be any worse than x86 where
we may indicate that all CPUs are hotpluggable but occasionally
we can't offline a CPU due to check_irq_vectors_for_cpu_disable()
failing to find a CPU to move vectors to.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Acked-by: Simon Horman <horms@verge.net.au> [shmobile portion]
Tested-by: NSimon Horman <horms@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: <linux-sh@vger.kernel.org>
Tested-by: NTyler Baker <tyler.baker@linaro.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      787047ee
  3. 10 7月, 2015 3 次提交
    • W
      ARM: 8403/1: kbuild: don't use generic mcs_spinlock.h header · 57853e89
      由 Will Deacon 提交于 
      We provide our own implementation of asm/mcs_spinlock.h, so there's no
need to ask for the (empty) generic version.
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      57853e89
    • S
      ARM: 8401/1: perf: Set affinity for PPI based PMUs · 8ded1e1a
      由 Stephen Boyd 提交于 
      For PPI based PMUs, we bail out early in of_pmu_irq_cfg() without
setting the PMU's supported_cpus bitmap. This causes the
smp_call_function_any() in armv7_probe_num_events() to fail. Set
the bitmap to be all CPUs so that we properly probe PMUs that use
PPIs.

Fixes: cc88116d ("arm: perf: treat PMUs as CPU affine")
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      8ded1e1a
    • G
      ARM: 8395/1: l2c: Add support for the "arm,shared-override" property · eeedcea6
      由 Geert Uytterhoeven 提交于 
      "CoreLink Level 2 Cache Controller L2C-310", p. 2-15, section 2.3.2
Shareable attribute" states:

    "The default behavior of the cache controller with respect to the
     shareable attribute is to transform Normal Memory Non-cacheable
     transactions into:
        - cacheable no allocate for reads
        - write through no write allocate for writes."

Depending on the system architecture, this may cause memory corruption
in the presence of bus mastering devices (e.g. OHCI). To avoid such
corruption, the default behavior can be disabled by setting the Shared
Override bit in the Auxiliary Control register.

Currently the Shared Override bit can be set only using C code:
  - by calling l2x0_init() directly, which is deprecated,
  - by setting/clearing the bit in the machine_desc.l2c_aux_val/mask
    fields, but using values differing from 0/~0 is also deprecated.

Hence add support for an "arm,shared-override" device tree property for
the l2c device node. By specifying this property, affected systems can
indicate that non-cacheable transactions must not be transformed.
Then, it's up to the OS to decide. The current behavior is to set the
"shared attribute override enable" bit, as there may exist kernel linear
mappings and cacheable aliases for the DMA buffers, even if CMA is
enabled.

See also commit 1a8e41cd ("ARM: 6395/1: VExpress: Set bit 22 in
the PL310 (cache controller) AuxCtlr register"):

    "Clearing bit 22 in the PL310 Auxiliary Control register (shared
     attribute override enable) has the side effect of transforming
     Normal Shared Non-cacheable reads into Cacheable no-allocate reads.

     Coherent DMA buffers in Linux always have a Cacheable alias via the
     kernel linear mapping and the processor can speculatively load
     cache lines into the PL310 controller. With bit 22 cleared,
     Non-cacheable reads would unexpectedly hit such cache lines leading
     to buffer corruption."
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      eeedcea6
  5. 04 7月, 2015 7 次提交
  7. 03 7月, 2015 3 次提交
    • H
      ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry · f9058929
      由 Hanjun Guo 提交于 
      It is normal that firmware presents GICC entry or entries (processors)
with disabled flag in ACPI MADT, taking a system of 16 cpus for example,
ACPI firmware may present 8 ebabled first with another 8 cpus disabled
in MADT, the disabled cpus can be hot-added later.

Firmware may also present more cpus than the hardware actually has, but
disabled the unused ones, and easily enable it when the hardware has such
cpus to make the firmware code scalable.

So that's not an error for disabled cpus in MADT, we can switch pr_err()
to pr_debug() to make the boot a little quieter by default.

Since hwid for disabled cpus often are invalid, and we check invalid hwid
first in the code, for use case that hot add cpus later will be filtered
out and will not be counted in possible cups, so move this check before
the hwid one to prepare the code to count for disabeld cpus when cpu
hot-plug is introduced.
Signed-off-by: NHanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: NAl Stone <ahs3@redhat.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      f9058929
    • T
      [IA64] Drop debug test/printk that some special pages are marked reserved · 43c518d1
      由 Tony Luck 提交于 
      In commit 92923ca3 "mm: meminit: only set page reserved in the memblock region"
we dropped setting the reserved bits for all pages. This results in some warnings
on ia64:

put_kernel_page: page at 0xe000000005588000 not in reserved memory
put_kernel_page: page at 0xe000000005588000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory

the two different pages match up with two objects from the loaded kernel
that get mapped by arch/ia64/mm/init.c:setup_gate()

a000000101588000 D __start_gate_section
a000000101580000 D empty_zero_page

In a discussion with Mel Gorman:
  http://lkml.kernel.org/r/20150526102219.GB13750%40suse.de
he suggested that while the preferred approach might be to
set the reserved bit for these pages, it would also be OK
to just drop the test:
   "as it's a debugging check that is ia-64 specific"

After hunting around a bit and failin to find a good place to mark these
pages as reserved - I decided to just delete the test.
Signed-off-by: NTony Luck <tony.luck@intel.com>
      43c518d1
    • J
      arm64: cpuidle: add __init section marker to arm_cpuidle_init · ea389daa
      由 Jisheng Zhang 提交于 
      It is not needed after booting, this patch moves the arm_cpuidle_init()
function to the __init section.
Signed-off-by: NJisheng Zhang <jszhang@marvell.com>
Reviewed-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      ea389daa
  9. 02 7月, 2015 4 次提交
  11. 01 7月, 2015 13 次提交
  13. 30 6月, 2015 3 次提交
    • P
      perf/x86: Fix 'active_events' imbalance · 93472aff
      由 Peter Zijlstra 提交于 
      Commit 1b7b938f ("perf/x86/intel: Fix PMI handling for Intel PT") conditionally
increments active_events in x86_add_exclusive() but unconditionally decrements in
x86_del_exclusive().

These extra decrements can lead to the situation where
active_events is zero and thus the PMI handler is 'disabled'
while we have active events on the PMU generating PMIs.

This leads to a truckload of:

  Uhhuh. NMI received for unknown reason 21 on CPU 28.
  Do you have a strange power saving mode enabled?
  Dazed and confused, but trying to continue

messages and generally messes up perf.

Remove the condition on the increment, double increment balanced
by a double decrement is perfectly fine.

Restructure the code a little bit to make the unconditional inc
a bit more natural.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: alexander.shishkin@linux.intel.com
Cc: brgerst@gmail.com
Cc: dvlasenk@redhat.com
Cc: luto@amacapital.net
Cc: oleg@redhat.com
Fixes: 1b7b938f ("perf/x86/intel: Fix PMI handling for Intel PT")
Link: http://lkml.kernel.org/r/20150624144750.GJ18673@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      93472aff
    • I
      x86/fpu: Fix FPU related boot regression when CPUID masking BIOS feature is enabled · db52ef74
      由 Ingo Molnar 提交于 
      Mike Galbraith reported:

  " My i7-4790 box is having one hell of a time with this merge
    window, dead in the water.

    BIOS setting "Limit CPUID Maximum" upsets new fpu code
    mightily. "

It turns out that Linux does a double workaround here, as per:

  066941bd ("x86: unmask CPUID levels on Intel CPUs")

it undoes the BIOS workaround - but as a side effect the CPUID
state is not completely constant during early init anymore,
and the new FPU init code did not take this into account.

So what happened is that the xstate init code did not have full
CPUID available, which broke subsequent attempts to use xstate
features.

Fix this by ordering the early FPU init code to after we've
stabilized the CPUID state.
Reported-bisected-and-tested-by: NMike Galbraith <umgwanakikbuti@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150627082514.GA10894@gmail.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      db52ef74
    • Q
      intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver · 0a8b8353
      由 qipeng.zha 提交于 
      This driver provides support for PMC control on Apollo Lake platforms.
The PMC is an ARC processor which defines some IPC commands for
communication with other entities in the CPU.
Signed-off-by: Nqipeng.zha <qipeng.zha@intel.com>
[fengguang.wu@intel.com: Fix Sparse and Cocinelle warnings]
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
      0a8b8353
  15. 29 6月, 2015 2 次提交
  17. 28 6月, 2015 2 次提交
  19. 27 6月, 2015 2 次提交