This ioctl is modeled after the xfs's XFS_IOC_GOINGDOWN ioctl.  (In
fact, it uses the same code points.)
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Add a shutdown bit that will cause ext4 processing to fail immediately
with EIO.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

We are currently using one bit in s_resize_flags; rename it in order
to allow more of the bits in that unsigned long for other purposes.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

If the file system requires journal recovery, and the device is
read-ony, return EROFS to the mount system call.  This allows xfstests
generic/050 to pass.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

If the journal is aborted, the needs_recovery feature flag should not
be removed.  Otherwise, it's the journal might not get replayed and
this could lead to more data getting lost.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

If the journal has been aborted, we shouldn't mark the underlying
buffer head as dirty, since that will cause the metadata block to get
modified.  And if the journal has been aborted, we shouldn't allow
this since it will almost certainly lead to a corrupted file system.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

The write_end() function must always unlock the page and drop its ref
count, even on an error.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

The "half md4" transform should not be used by any new code. And
fortunately, it's only used now by ext4. Since ext4 supports several
hashing methods, at some point it might be desirable to move to
something like SipHash. As an intermediate step, remove half md4 from
cryptohash.h and lib, and make it just a local function in ext4's
hash.c. There's precedent for doing this; the other function ext can use
for its hashes -- TEA -- is also implemented in the same place. Also, by
being a local function, this might allow gcc to perform some additional
optimizations.
Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: NAndreas Dilger <adilger@dilger.ca>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In the case where the child's encryption context was inconsistent with
its parent directory, we were using inode->i_sb and inode->i_ino after
the inode had already been iput().  Fix this by doing the iput() in the
correct places.

Note: only ext4 had this bug, not f2fs and ubifs.

Fixes: d9cdc903 ("ext4 crypto: enforce context consistency")
Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Below is the synchronization issue between unmount and kjournald2
contexts, which results into use after free issue in kjournald2().
Fix this issue by using journal->j_state_lock to synchronize the
wait_event() done in journal_kill_thread() and the wake_up() done
in kjournald2().

TASK 1:
umount cmd:
   |--jbd2_journal_destroy() {
       |--journal_kill_thread() {
            write_lock(&journal->j_state_lock);
	    journal->j_flags |= JBD2_UNMOUNT;
	    ...
	    write_unlock(&journal->j_state_lock);
	    wake_up(&journal->j_wait_commit);	   TASK 2 wakes up here:
	    					   kjournald2() {
						     ...
						     checks JBD2_UNMOUNT flag and calls goto end-loop;
						     ...
						     end_loop:
						       write_unlock(&journal->j_state_lock);
						       journal->j_task = NULL; --> If this thread gets
						       pre-empted here, then TASK 1 wait_event will
						       exit even before this thread is completely
						       done.
	    wait_event(journal->j_wait_done_commit, journal->j_task == NULL);
	    ...
	    write_lock(&journal->j_state_lock);
	    write_unlock(&journal->j_state_lock);
	  }
       |--kfree(journal);
     }
}
						       wake_up(&journal->j_wait_done_commit); --> this step
						       now results into use after free issue.
						   }
Signed-off-by: NSahitya Tummala <stummala@codeaurora.org>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

ext4_journalled_write_end() did not propely handle all the cases when
generic_perform_write() did not copy all the data into the target page
and could mark buffers with uninitialized contents as uptodate and dirty
leading to possible data corruption (which would be quickly fixed by
generic_perform_write() retrying the write but still). Fix the problem
by carefully handling the case when the page that is written to is not
uptodate.

CC: stable@vger.kernel.org
Reported-by: NAl Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

If filesystem groups are artifically small (using parameter -g to
mkfs.ext4), ext4_mb_normalize_request() can result in a request that is
larger than a block group. Trim the request size to not confuse
allocation code.
Reported-by: N"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

The last BUG_ON in mb_find_extent() is apparently triggering in some
rare cases.  Most of the time it indicates a bug in the buddy bitmap
algorithms, but there are some weird cases where it can trigger when
buddy bitmap is still in memory, but the block bitmap has to be read
from disk, and there is disk or memory corruption such that the block
bitmap and the buddy bitmap are out of sync.

Google-Bug-Id: #33702157
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

There is no need to call ext4_mark_inode_dirty while holding xattr_sem
or i_data_sem, so where it's easy to avoid it, move it out from the
critical region.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

The xattr_sem deadlock problems fixed in commit 2e81a4ee: "ext4:
avoid deadlock when expanding inode size" didn't include the use of
xattr_sem in fs/ext4/inline.c.  With the addition of project quota
which added a new extra inode field, this exposed deadlocks in the
inline_data code similar to the ones fixed by 2e81a4ee.

The deadlock can be reproduced via:

   dmesg -n 7
   mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768
   mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc
   mkdir /vdc/a
   umount /vdc
   mount -t ext4 /dev/vdc /vdc
   echo foo > /vdc/a/foo

and looks like this:

[   11.158815] 
[   11.160276] =============================================
[   11.161960] [ INFO: possible recursive locking detected ]
[   11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G        W      
[   11.161960] ---------------------------------------------
[   11.161960] bash/2519 is trying to acquire lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1225a4b>] ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960] 
[   11.161960] but task is already holding lock:
[   11.161960]  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960] 
[   11.161960] other info that might help us debug this:
[   11.161960]  Possible unsafe locking scenario:
[   11.161960] 
[   11.161960]        CPU0
[   11.161960]        ----
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960]   lock(&ei->xattr_sem);
[   11.161960] 
[   11.161960]  *** DEADLOCK ***
[   11.161960] 
[   11.161960]  May be due to missing lock nesting notation
[   11.161960] 
[   11.161960] 4 locks held by bash/2519:
[   11.161960]  #0:  (sb_writers#3){.+.+.+}, at: [<c11a2414>] mnt_want_write+0x1e/0x3e
[   11.161960]  #1:  (&type->i_mutex_dir_key){++++++}, at: [<c119508b>] path_openat+0x338/0x67a
[   11.161960]  #2:  (jbd2_handle){++++..}, at: [<c123314a>] start_this_handle+0x582/0x622
[   11.161960]  #3:  (&ei->xattr_sem){++++..}, at: [<c1227941>] ext4_try_add_inline_entry+0x3a/0x152
[   11.161960] 
[   11.161960] stack backtrace:
[   11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G        W       4.10.0-rc3-00015-g011b30a8a3cf #160
[   11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014
[   11.161960] Call Trace:
[   11.161960]  dump_stack+0x72/0xa3
[   11.161960]  __lock_acquire+0xb7c/0xcb9
[   11.161960]  ? kvm_clock_read+0x1f/0x29
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  ? __lock_is_held+0x36/0x66
[   11.161960]  lock_acquire+0x106/0x18a
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  down_write+0x39/0x72
[   11.161960]  ? ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ext4_expand_extra_isize_ea+0x3d/0x4cd
[   11.161960]  ? _raw_read_unlock+0x22/0x2c
[   11.161960]  ? jbd2_journal_extend+0x1e2/0x262
[   11.161960]  ? __ext4_journal_get_write_access+0x3d/0x60
[   11.161960]  ext4_mark_inode_dirty+0x17d/0x26d
[   11.161960]  ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_add_dirent_to_inline.isra.12+0xa5/0xb2
[   11.161960]  ext4_try_add_inline_entry+0x69/0x152
[   11.161960]  ext4_add_entry+0xa3/0x848
[   11.161960]  ? __brelse+0x14/0x2f
[   11.161960]  ? _raw_spin_unlock_irqrestore+0x44/0x4f
[   11.161960]  ext4_add_nondir+0x17/0x5b
[   11.161960]  ext4_create+0xcf/0x133
[   11.161960]  ? ext4_mknod+0x12f/0x12f
[   11.161960]  lookup_open+0x39e/0x3fb
[   11.161960]  ? __wake_up+0x1a/0x40
[   11.161960]  ? lock_acquire+0x11e/0x18a
[   11.161960]  path_openat+0x35c/0x67a
[   11.161960]  ? sched_clock_cpu+0xd7/0xf2
[   11.161960]  do_filp_open+0x36/0x7c
[   11.161960]  ? _raw_spin_unlock+0x22/0x2c
[   11.161960]  ? __alloc_fd+0x169/0x173
[   11.161960]  do_sys_open+0x59/0xcc
[   11.161960]  SyS_open+0x1d/0x1f
[   11.161960]  do_int80_syscall_32+0x4f/0x61
[   11.161960]  entry_INT80_32+0x2f/0x2f
[   11.161960] EIP: 0xb76ad469
[   11.161960] EFLAGS: 00000286 CPU: 0
[   11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6
[   11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0
[   11.161960]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b

Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4ee as a prereq)
Reported-by: NGeorge Spelvin <linux@sciencehorizons.net>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

In order to test the inode extra isize expansion code, it is useful to
be able to easily create file systems that have inodes with extra
isize values smaller than the current desired value.
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Inside ext4_ext_shift_extents() function ext4_find_extent() is called
without EXT4_EX_NOCACHE flag, which should prevent cache population.

This leads to oudated offsets in the extents tree and wrong blocks
afterwards.

Patch fixes the problem providing EXT4_EX_NOCACHE flag for each
ext4_find_extents() call inside ext4_ext_shift_extents function.

Fixes: 331573feSigned-off-by: NRoman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: stable@vger.kernel.org

While doing 'insert range' start block should be also shifted right.
The bug can be easily reproduced by the following test:

    ptr = malloc(4096);
    assert(ptr);

    fd = open("./ext4.file", O_CREAT | O_TRUNC | O_RDWR, 0600);
    assert(fd >= 0);

    rc = fallocate(fd, 0, 0, 8192);
    assert(rc == 0);
    for (i = 0; i < 2048; i++)
            *((unsigned short *)ptr + i) = 0xbeef;
    rc = pwrite(fd, ptr, 4096, 0);
    assert(rc == 4096);
    rc = pwrite(fd, ptr, 4096, 4096);
    assert(rc == 4096);

    for (block = 2; block < 1000; block++) {
            rc = fallocate(fd, FALLOC_FL_INSERT_RANGE, 4096, 4096);
            assert(rc == 0);

            for (i = 0; i < 2048; i++)
                    *((unsigned short *)ptr + i) = block;

            rc = pwrite(fd, ptr, 4096, 4096);
            assert(rc == 4096);
    }

Because start block is not included in the range the hole appears at
the wrong offset (just after the desired offset) and the following
pwrite() overwrites already existent block, keeping hole untouched.

Simple way to verify wrong behaviour is to check zeroed blocks after
the test:

   $ hexdump ./ext4.file | grep '0000 0000'

The root cause of the bug is a wrong range (start, stop], where start
should be inclusive, i.e. [start, stop].

This patch fixes the problem by including start into the range.  But
not to break left shift (range collapse) stop points to the beginning
of the a block, not to the end.

The other not obvious change is an iterator check on validness in a
main loop.  Because iterator is unsigned the following corner case
should be considered with care: insert a block at 0 offset, when stop
variables overflows and never becomes less than start, which is 0.
To handle this special case iterator is set to NULL to indicate that
end of the loop is reached.

Fixes: 331573feSigned-off-by: NRoman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: stable@vger.kernel.org

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

There was an unnecessary amount of complexity around requesting the
filesystem-specific key prefix.  It was unclear why; perhaps it was
envisioned that different instances of the same filesystem type could
use different key prefixes, or that key prefixes could be binary.
However, neither of those things were implemented or really make sense
at all.  So simplify the code by making key_prefix a const char *.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Reviewed-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Nothing reads or writes fscrypt_ctx.mode, and it doesn't belong there
because a fscrypt_ctx is not tied to a specific encryption mode.
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

While we allow deletes without the key, the following should not be
permitted:

# cd /vdc/encrypted-dir-without-key
# ls -l
total 4
-rw-r--r-- 1 root root   0 Dec 27 22:35 6,LKNRJsp209FbXoSvJWzB
-rw-r--r-- 1 root root 286 Dec 27 22:35 uRJ5vJh9gE7vcomYMqTAyD
# mv uRJ5vJh9gE7vcomYMqTAyD  6,LKNRJsp209FbXoSvJWzB
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b46879 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: NDave Chinner <david@fromorbit.com>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions

The Greybus driver subsystem has a mailing list, so list it in the
MAINTAINERS file so that people know to send patches there as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull sound fixes from Takashi Iwai:
 "Nothing particular stands out, only a few small fixes for USB-audio,
  HD-audio and Firewire. The USB-audio fix is the respin of the previous
  race fix after a revert due to the regression"

* tag 'sound-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  Revert "ALSA: firewire-lib: change structure member with proper type"
  ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
  ALSA: usb-audio: Fix irq/process data synchronization
  ALSA: hda - Apply asus-mode8 fixup to ASUS X71SL
  ALSA: hda - Fix up GPIO for ASUS ROG Ranger
  ALSA: firewire-lib: change structure member with proper type
  ALSA: firewire-tascam: Fix to handle error from initialization of stream data
  ALSA: fireworks: fix asymmetric API call at unit removal

Pull clk fixes from Stephen Boyd:
 "One fix for a broken driver on Renesas RZ/A1 SoCs with bootloaders
  that don't turn all the clks on and another fix for stm32f4 SoCs where
  we have multiple drivers attaching to the same DT node"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: stm32f4: Use CLK_OF_DECLARE_DRIVER initialization method
  clk: renesas: mstp: Support 8-bit registers for r7s72100

Merge tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Fix temp1_max_alarm attribute in lm90 driver"

* tag 'hwmon-for-linus-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (lm90) fix temp1_max_alarm attribute

Pull KVM fixes from Radim Krčmář:
 "MIPS:
   - fix host kernel crashes when receiving a signal with 64-bit
     userspace

   - flush instruction cache on all vcpus after generating entry code

     (both for stable)

  x86:
   - fix NULL dereference in MMU caused by SMM transitions (for stable)

   - correct guest instruction pointer after emulating some VMX errors

   - minor cleanup"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: remove duplicated declaration
  KVM: MIPS: Flush KVM entry code from icache globally
  KVM: MIPS: Don't clobber CP0_Status.UX
  KVM: x86: reset MMU on KVM_SET_VCPU_EVENTS
  KVM: nVMX: fix instruction skipping during emulated vm-entry

Pull arm64 fixes from Catalin Marinas:

 - re-introduce the arm64 get_current() optimisation

 - KERN_CONT fallout fix in show_pte()

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: restore get_current() optimisation
  arm64: mm: fix show_pte KERN_CONT fallout

Pull VFIO fixes from Alex Williamson:
 - Add mtty sample driver properly into build system (Alex Williamson)
 - Restore type1 mapping performance after mdev (Alex Williamson)
 - Fix mdev device race (Alex Williamson)
 - Cleanups to the mdev ABI used by vendor drivers (Alex Williamson)
 - Build fix for old compilers (Arnd Bergmann)
 - Fix sample driver error path (Dan Carpenter)
 - Handle pci_iomap() error (Arvind Yadav)
 - Fix mdev ioctl return type (Paul Gortmaker)

* tag 'vfio-v4.10-rc3' of git://github.com/awilliam/linux-vfio:
  vfio-mdev: fix non-standard ioctl return val causing i386 build fail
  vfio-pci: Handle error from pci_iomap
  vfio-mdev: fix some error codes in the sample code
  vfio-pci: use 32-bit comparisons for register address for gcc-4.5
  vfio-mdev: Make mdev_device private and abstract interfaces
  vfio-mdev: Make mdev_parent private
  vfio-mdev: de-polute the namespace, rename parent_device & parent_ops
  vfio-mdev: Fix remove race
  vfio/type1: Restore mapping performance with mdev support
  vfio-mdev: Fix mtty sample driver building

Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb fixes from Konrad Rzeszutek Wilk:
 "This has one fix to make i915 work when using Xen SWIOTLB, and a
  feature from Geert to aid in debugging of devices that can't do DMA
  outside the 32-bit address space.

  The feature from Geert is on top of v4.10 merge window commit
  (specifically you pulling my previous branch), as his changes were
  dependent on the Documentation/ movement patches.

  I figured it would just easier than me trying than to cherry-pick the
  Documentation patches to satisfy git.

  The patches have been soaking since 12/20, albeit I updated the last
  patch due to linux-next catching an compiler error and adding an
  Tested-and-Reported-by tag"

* 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Export swiotlb_max_segment to users
  swiotlb: Add swiotlb=noforce debug option
  swiotlb: Convert swiotlb_force from int to enum
  x86, swiotlb: Simplify pci_swiotlb_detect_override()

Pull IOMMU fixes from Joerg Roedel:
 "Three fixes queued up:

   - fix an issue with command buffer overflow handling in the AMD IOMMU
     driver

   - add an additional context entry flush to the Intel VT-d driver to
     make sure any old context entry from kdump copying is flushed out
     of the cache

   - correct the encoding of the PASID table size in the Intel VT-d
     driver"

* tag 'iommu-fixes-v4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix the left value check of cmd buffer
  iommu/vt-d: Fix pasid table size encoding
  iommu/vt-d: Flush old iommu caches for kdump when the device gets context mapped

Pull ACPI fixes from Rafael Wysocki:
 "These fix a device enumeration problem related to _ADR matching and an
  IOMMU initialization issue related to the DMAR table missing, remove
  an excessive function call from the core ACPI code, update an error
  message in the ACPI WDAT watchdog driver and add a way to work around
  problems with unhandled GPE notifications.

  Specifics:

   - Fix a device enumeration issue leading to incorrect associations
     between ACPI device objects and platform device objects
     representing physical devices if the given device object has both
     _ADR and _HID (Rafael Wysocki).

   - Avoid passing NULL to acpi_put_table() during IOMMU initialization
     which triggers a (rightful) warning from ACPICA (Rafael Wysocki).

   - Drop an excessive call to acpi_dma_deconfigure() from the core code
     that binds ACPI device objects to device objects representing
     physical devices (Lorenzo Pieralisi).

   - Update an error message in the ACPI WDAT watchdog driver to make it
     provide more useful information (Mika Westerberg).

   - Add a mechanism to work around issues with unhandled GPE
     notifications that occur during system initialization and cannot be
     prevented by means of sysfs (Lv Zheng)"

* tag 'acpi-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / DMAR: Avoid passing NULL to acpi_put_table()
  ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
  ACPI / watchdog: Print out error number when device creation fails
  ACPI / sysfs: Provide quirk mechanism to prevent GPE flooding
  ACPI: Drop misplaced acpi_dma_deconfigure() call from acpi_bind_one()