alloc failures already get standardized OOM
messages and a dump_stack.

For the affected mallocs around these OOM messages:

Converted kzallocs with multiplies to kcalloc.
Converted kmallocs with multiplies to kmalloc_array.
Converted a kmalloc/strlen/strncpy to kstrdup.
Moved a spin_lock below a removed OOM message and
removed a now unnecessary spin_unlock.
Neatened alignment and whitespace.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-3.9d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

"4th set of IIO new drivers cleanups and fixes for the 3.9 cycle
+ a new spi helper function.

1) Introduce spi_sync_transfer and use it within IIO.  Originally
   it was envisioned that this nice little boilerplate replacement
   would go through the spi tree, but Grant Likely stated he'd
   prefer we take it through IIO as the example usecases were all
   in IIO (and are also in this pull request).  Note that given
   their may have been some unresolved elements related to the
   coccinelle element of the patch, that has been stripped out
   and will doubtlessly follow at a later date (along with
   lots of other patches for drivers elsewhere in the tree).

2) New Invensense MPU6050 driver.  This is stripped down to pretty
   much the basics from the original submission with the intent
   to build up all the fancy bits in an incremental (and hence
   reviewable fashion). It's been through a good few revisions
   so nice to finally merge this.

3) Change to iio_channel_get api to simplify device tree based
   mappings.  The actual mappings are currently under review.

4) Build fixes for !CONFIG_IIO_TRIGGER in the st_sensors driver.
   This one snuck past during review and testing but got picked
   up by Randy Dunlap in a randconfig build.

5) Some max1363 cleanups and enhancements.

6) Some comment fixes to make them coherent and comprehensible.

7) Trivial build warning fix in mxs-lradc"

This the basic functional Invensense MPU6050 Device driver.
Signed-off-by: NGe Gao <ggao@invensense.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Partly a case of removing unused headers and partly a case
of ifdefing out the iio_trigger_ops structures.  This has
come about because of an 'unusual' separation of code in this
driver.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>

Also include a couple of forward defs of struct iio_trigger and struct
iio_trigger_ops to avoid doing this in each driver.
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NDenis Ciocca <denis.ciocca@st.com>

Use the new spi_sync_transfer() helper function instead of open-coding it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use the new spi_sync_transfer() helper function instead of open-coding it.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Quite often the pattern used for setting up and transferring a synchronous SPI
transaction looks very much like the following:

	struct spi_message msg;
	struct spi_transfer xfers[] = {
		...
	};

	spi_message_init(&msg);
	spi_message_add_tail(&xfers[0], &msg);
	...
	spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);

	ret = spi_sync(&msg);

This patch adds two new helper functions for handling this case. The first
helper function spi_message_init_with_transfers() takes a spi_message and an
array of spi_transfers. It will initialize the message and then call
spi_message_add_tail() for each transfer in the array. E.g. the following

	spi_message_init(&msg);
	spi_message_add_tail(&xfers[0], &msg);
	...
	spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);

can be rewritten as

	spi_message_init_with_transfers(&msg, xfers, ARRAY_SIZE(xfers));

The second function spi_sync_transfer() takes a SPI device and an array of
spi_transfers. It will allocate a new spi_message (on the stack) and add all
transfers in the array to the message. Finally it will call spi_sync() on the
message.

E.g. the follwing

	struct spi_message msg;
	struct spi_transfer xfers[] = {
		...
	};

	spi_message_init(&msg);
	spi_message_add_tail(&xfers[0], &msg);
	...
	spi_message_add_tail(&xfers[ARRAY_SIZE(xfers) - 1], &msg);

	ret = spi_sync(spi, &msg);

can be rewritten as

	struct spi_transfer xfers[] = {
		...
	};

	ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers));

A coccinelle script to find such instances will follow.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The following warning is generated by sparse:

drivers/staging/iio/adc/mxs-lradc.c:118:47: warning: duplicate const

Remove the duplicate const.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

This patch resolve a bugfix when driver is compiled without trigger.
Signed-off-by: NDenis Ciocca <denis.ciocca@st.com>
Reported-by: NRandy Dunlap  <rdunlap@infradead.org>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is never called when pVBInfo->IF_DEF_LVDS is true, so we
can remove checks and reduce complexity.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Delete IF_DEF_LVDS check, this function is never called when it's true.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Prefix the functions in dgrp_specproc.c to avoid ambiguity in backtraces, such
as the "info_proc_open" in this one:

unreferenced object 0xffff88003b6696e0 (size 32):
  comm "cat", pid 2321, jiffies 4294705179 (age 29.434s)
  hex dump (first 32 bytes):
    40 79 1c 81 ff ff ff ff 60 79 1c 81 ff ff ff ff  @y......`y......
    50 79 1c 81 ff ff ff ff b0 62 89 81 ff ff ff ff  Py.......b......
  backtrace:
    [<ffffffff81c7e3b1>] kmemleak_alloc+0x21/0x50
    [<ffffffff811955cb>] kmem_cache_alloc_trace+0x11b/0x190
    [<ffffffff811c87dc>] single_open+0x3c/0xc0
    [<ffffffff81896495>] info_proc_open+0x15/0x20
    [<ffffffff8120c6d7>] proc_reg_open+0xb7/0x160
    [<ffffffff811a1a5c>] do_dentry_open+0x1cc/0x280
    [<ffffffff811a296a>] finish_open+0x4a/0x60
    [<ffffffff811b14d7>] do_last+0xb07/0xdb0
    [<ffffffff811b1842>] path_openat+0xc2/0x4f0
    [<ffffffff811b1cac>] do_filp_open+0x3c/0xa0
    [<ffffffff811a2dcc>] do_sys_open+0x11c/0x1c0
    [<ffffffff811a2e8c>] sys_open+0x1c/0x20
    [<ffffffff81ca3d69>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Trinity (the syscall fuzzer) discovered that reading /proc/dgrp/info was
leaking some memory. Fix by using the correct release op in info_proc_file_ops.

unreferenced object 0xffff88003b6696e0 (size 32):
  comm "cat", pid 2321, jiffies 4294705179 (age 29.434s)
  hex dump (first 32 bytes):
    40 79 1c 81 ff ff ff ff 60 79 1c 81 ff ff ff ff  @y......`y......
    50 79 1c 81 ff ff ff ff b0 62 89 81 ff ff ff ff  Py.......b......
  backtrace:
    [<ffffffff81c7e3b1>] kmemleak_alloc+0x21/0x50
    [<ffffffff811955cb>] kmem_cache_alloc_trace+0x11b/0x190
    [<ffffffff811c87dc>] single_open+0x3c/0xc0
    [<ffffffff81896495>] info_proc_open+0x15/0x20
    [<ffffffff8120c6d7>] proc_reg_open+0xb7/0x160
    [<ffffffff811a1a5c>] do_dentry_open+0x1cc/0x280
    [<ffffffff811a296a>] finish_open+0x4a/0x60
    [<ffffffff811b14d7>] do_last+0xb07/0xdb0
    [<ffffffff811b1842>] path_openat+0xc2/0x4f0
    [<ffffffff811b1cac>] do_filp_open+0x3c/0xa0
    [<ffffffff811a2dcc>] do_sys_open+0x11c/0x1c0
    [<ffffffff811a2e8c>] sys_open+0x1c/0x20
    [<ffffffff81ca3d69>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: NTommi Rantala <tt.rantala@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_alloc_subdevice_minors()` currently prints a message about
running out of minor numbers board device files if it runs out of minor
device numbers.  Change it to complain about running out of minor device
numbers for subdevice files as these are in a different range, not
shared with those for board device files.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_alloc_subdevice_minor()` currently returns the allocated minor
device number on success.  This is not really of any interest to the
caller (in fact the return value is not even checked), so just return 0
on success.  If the caller really needs to know the allocated minor
device number it can look in `s->minor`.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If CONFIG_MTD is not set goldfish_nand fails to compile with the
following linker warnings:

drivers/built-in.o: In function `goldfish_nand_remove':
goldfish_nand.c:(.text+0x6e7d0e): undefined reference to
`mtd_device_unregister'
drivers/built-in.o: In function `goldfish_nand_erase':
goldfish_nand.c:(.text+0x6e8ba2): undefined reference to
`mtd_erase_callback'
drivers/built-in.o: In function `goldfish_nand_init_device':
goldfish_nand.c:(.text+0x6e8eba): undefined reference to
`mtd_device_parse_register'
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When building the driver, gcc emits the following warnings:
.../drivers/staging/goldfish/goldfish_nand.c:
In function 'goldfish_nand_read_oob':
goldfish_nand.c:159:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
goldfish_nand.c:159:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 4 has type 'size_t' [-Wformat]

In function 'goldfish_nand_write_oob':
goldfish_nand.c:191:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]
goldfish_nand.c:191:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 4 has type 'size_t' [-Wformat]

In function 'goldfish_nand_read':
goldfish_nand.c:215:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]

In function 'goldfish_nand_write':
goldfish_nand.c:239:2:
warning: format '%x' expects argument of type 'unsigned int', but
argument 3 has type 'size_t' [-Wformat]

-> As defined in the printk-formats use %zx for size_t variables
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'if (ret)' after calling comedi_pcmcia_enable() was accidentally
removed in:

Commit: 573a9648
staging: comedi: ni_daq_dio24: use comedi_pcmcia_{enable,disable}

Put if back so that dio24_auto_attach() can finish attaching to
the board after enabling the pcmcia device.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 56810a92 (staging: xgifb: use
XGIRegInit()) left 3cc uninitialized, and it may trigger a panic during
probe. Fix this.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The kbuild test robot reported a build error in this driver caused by:

commit: a3ac9519
staging: comedi: comedi_pcmcia: allow drivers to use a custom conf_check()

This commit changed the comedi_pcmcia_enable() function so that it now
takes two arguments. The new argument is an optional (*conf_check)
function that is passed to pcmcia_loop_config().

This driver uses the default (*conf_check) in comedi_pcmcia.c so just
pass a NULL as the second arg.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For iio_channel_get to work with OF based configurations, it needs the
consumer device pointer instead of the consumer device name as argument.
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NAnton Vorontsov <anton@enomsg.org>
Acked-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NPeter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Implement external reference voltage as regulator named "vref".
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Use pcmcia_request_irq() instead of request_irq() to request the
shared irq for the PCMCIA device. This allows the PCMCIA core to
clean up the registration in pcmcia_disable_device().
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver uses a local (*conf_check) to check the pcmcia_device
configuration.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow comedi pcmcia drivers to use a custom conf_check() when calling
comedi_pcmcia_enable() to enable the pcmcia device. If a conf_check()
is not passed the internal comedi_pcmcia_conf_check() will be used.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver is not an audio device, remove CONF_AUTO_AUDIO from
the link->config_flags.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the comedi_pcmcia_{enable,disable} helpers to enable/disable
the PCMCIA device.

This driver does not use interrupts and is not an audio device, remove
CONF_ENABLE_IRQ and CONF_AUTO_AUDIO from the link->config_flags.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In comedi drivers typically *_attach_common() is used as the 'common'
part of the comedi_driver attach code for drivers that support various
bus types (ISA, PCI, etc.). This driver is specific to a USB device.

To avoid confusion when grepping, rename this function to something
more appropriate.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

git history provides a better Changelog for the driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The vmk8055_range table is a duplicate of the comedi core provided
range_unipolar5 table. Use that instead.

For aesthetic reasons, clean up the formating of the vmk8061_range
table.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

If CONFIG_COMEDI_DEBUG is defined a macro is enabled to output some
printk(KERN_REBUG ...) messages. These are just added noise. Remove
it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is no longer used by the driver. Remove it.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>