The errors were found by checkpatch.pl. Most fixes are:
- remove spaces followed by TAB(s),
- split lines greater than 80 characters,
- move most '{'s from start of line to end of previous line.
  (Some '{'s at start of line remain when the '}'s are on the same line)
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The PO2030N sensor chip found in hama AC-150 webcam supports horizontal
and vertical flipping the image by hardware.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The number 0xdd is used for marking delay init sequence steps.
Replace 0xdd values only if the meaning is delay.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The bug was introduced by commit d5aa3856
removing the probe sequence of hv7131r with bridge sn9c120 and so, letting
the sensor inactive.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The bug was introduced by commit 23a98274
applying values of sensor sp80708 to sensors hv7131r and mi0360.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Cc: stable@kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a patch to the tm6000.h file that fixed up a macros and
comment error found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a patch to the tm6000-cards.c file that fixed up
a space error found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a patch to the
tm6000-cards.c
tm6000-core.c
tm6000-dvb.c
tm6000-i2c.c
tm6000-input.c
tm6000-regs.h
tm6000-stds.c
tm6000-usb-isoc.h
tm6000.h
files that fixed up a comments warnings found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a patch to the tm6000-video.c file that fixed
up a braces, tabs, comments and space Errors and Warnings found by the checkpatch.pl tools.

[mchehab@redhat.com: some changes didn't apply as it were based to an older version, so used patch -f to apply only the changes that are OK]
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a patch to the tm6000-i2c.c file that fixed "ERROR: do not
initialise statics to 0 or NULL" found by the checkpatch.pl tools.
Signed-off-by: NRuslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a driver for the video capture port on VIA integrated chipsets.  This
version has a remaining OLPCism or two and expects to be talking to an
ov7670; those can be improved as the need arises.

This work was supported by the One Laptop Per Child project.
Thanks to Laurent Pinchart for a number of useful comments.

Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The QVGA mode has a green horizontal line on the left hand side, and a red
(or sometimes blue) vertical line at the bottom. Tweak the visible area
to remove them.

Thanks to Mauro for explaining how to fix this.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NJonathan Corbet <corbet@lwn.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch changes the name of the av7110  driver from the
generic "dvb" to "av7110", to be descriptive of the driver.

I've included Oliver Endriss's ack from the original post, which
contained a mangled patch.  The content of the patch is unchanged.
Signed-off-by: NDerek Kelly <user.vdr@gmail.com>
Acked-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichel Garnier <catimimi@orange.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In file included from drivers/media/video/cx231xx/cx231xx-audio.c:40:
drivers/media/video/cx231xx/cx231xx.h:559: error: field ‘frontends’ has incomplete type
make[4]: ** [drivers/media/video/cx231xx/cx231xx-audio.o] Erro 1
make[3]: ** [drivers/media/video/cx231xx] Erro 2
make[2]: ** [drivers/media/video] Erro 2
make[1]: ** [drivers/media] Erro 2
make: ** [drivers] Erro 2
Reported-by: NMarcio Araujo Alves <froooozen@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Polaris design uses MCE support. Instead of reinventing the wheel,
just let mceusb handle the remote controller.
Acked-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NSri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Interface 0 is used by IR. The current driver starts initializing
on it, finishing on interface 6. Change the logic to only handle
interface 1. This allows another driver (mceusb) to take care of
the IR interface.
Reviewed-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NSri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

For now, it adds support for Conexant EVK and for Pixelview.
We should probably find a better way to specify all Conexant
Polaris devices, to avoid needing to repeat this setup on
both mceusb and cx231xx-cards.
Reviewed-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NSri Devi <Srinivasa.Deevi@conexant.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This avoids a race condition
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Those locking issues affect tvtime, causing a kernel oops/panic, due to
a race condition.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Instead, use core lock handling.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/cx25840/cx25840-core.c: In function ‘cx25840_s_frequency’:
drivers/media/video/cx25840/cx25840-core.c:1563: warning: unused variable ‘state’
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is just unnessesary, and now more logical

Also a lot of refactoring
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new event types for timeout & carrier report
Move timeout handling from ir_raw_event_store_with_filter to
ir-lirc-codec, where it is really needed.
Now lirc bridge ensures proper gap handling.
Extend lirc bridge for carrier & timeout reports

Note: all new ir_raw_event variables now should be initialized
like that: DEFINE_IR_RAW_EVENT(ev);

To clean an existing event, use init_ir_raw_event(&ev);
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patches adjusts the tuner delay to be longer in response to
several users experiencing tuner timeouts.  This change fixes that
problem and allows those users to be able to tune.
Signed-off-by: NDerek Kelly <user.vdr@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch updates the name of the dvb-usb-gp8psk driver
from "Genpix 8psk-to-USB2 DVB-S" to "Genpix DVB-S".
The old name doesn't reflect newer devices such as the
Skywalker line which also user this driver.
Signed-off-by: NDerek Kelly <user.vdr@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This adds support for the AUX_PLL in cx2583x chips which is available in
those although the audio part of the chip is not.
The AUX_PLL is used at least by Terratec in their Grabster AV400 device.
Signed-off-by: NSven Barth <pascaldragon@googlemail.com>
Acked-by: NMike Isely <isely@pobox.com>
Reviewed-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fixes these build errors and warnings:

drivers/media/video/cx231xx/cx231xx-417.c: In function 'cx231xx_load_firmware':
drivers/media/video/cx231xx/cx231xx-417.c:943: error: implicit declaration of function 'vmalloc'
drivers/media/video/cx231xx/cx231xx-417.c:943: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:950: warning: cast to pointer from integer of different size
drivers/media/video/cx231xx/cx231xx-417.c:1039: error: implicit declaration of function 'vfree'
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

The switch to the new control framework caused a regression where the audio was
no longer unmuted after the carrier scan finished.

The original code attempted to set the volume control to its current value in
order to have the set-volume control code to be called that handles the volume
and muting. However, the framework will not call that code unless the new volume
value is different from the old.

Instead we now call msp_s_ctrl directly.

It is a bit of a hack: we really need a v4l2_ctrl_refresh_ctrl function for this
(or something along those lines).

Thanks to Andy Walls for bisecting this and to Shane Shrybman for reporting it!
Reported-by: NShane Shrybman <shrybman@teksavvy.com>
Thanks-to: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When audio is present, some alternate settings were skipped.
This prevented some webcams to work, especially when bulk transfer was used.
This patch permits to use the last or only alternate setting.
Reported-by: NAntonio Ospite <ospite@studenti.unina.it>
Tested-by: NAntonio Ospite <ospite@studenti.unina.it>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Siliconfile SR030PC30 VGA camera fails to compile with this error:

drivers/media/video/sr030pc30.c: In function ‘sr030pc30_probe’:
drivers/media/video/sr030pc30.c:834: error: implicit declaration of function ‘kzalloc’
drivers/media/video/sr030pc30.c:834: warning: assignment makes pointer from integer without a cast
drivers/media/video/sr030pc30.c: In function ‘sr030pc30_remove’:
drivers/media/video/sr030pc30.c:858: error: implicit declaration of function ‘kfree’
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Based on USB traces of the windows driver.
Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

refine the firmware version test and print the version only once
Signed-off-by: NJanne Grunau <j@jannau.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>