Check to make sure the blank lines aren't comment lines like:

  bool foo(bool bar)
  {
	/* Don't warn on a leading comment */
	return !bar;
	/* Don't warn on a trailing comment either */
  }
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Figure out first how to determine if this is in a struct declaration or in
a function body before enabling this.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow "#define foo struct.member" without bleating a warning.

This also allows "#define foo bar.baz->qux" and so on.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Comparing get_jiffies_64() is almost always wrong and time_before64 and
time_after64 should be used instead.

Warn on any comparison to get_jiffies_64().
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Comparing jiffies is almost always wrong and time_before and time_after
should be used instead.

Warn on any comparison to jiffies.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some block comments in network are written as:

	/* block comment line 1
	   block comment line 2
	 */

Emit a warning on the "block comment line 2" because it should be

	/* block comment line 1
	 * block comment line 2
	 */

This warning is only emitted on the second line of a block comment.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Show the first line of the comment after a line with just /* to better
show where the defective comment style is in the file.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit be987d9f ("checkpatch: improve CamelCase test for Page") added
it but it shouldn't be there.  Must have been my fault.

Make sure that the tested variable doesn't contain a constant.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add another test for memory allocation style to follow
Documentation/CodingStyle:

		Chapter 14: Allocating memory

The preferred form for passing a size of a struct is the following:

	p = kmalloc(sizeof(*p), ...);
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The gcc extension for binary constants that start with 0b is only
supported with gcc version 4.3 or higher.

The kernel can still be compiled with earlier versions of gcc, so have
checkpatch emit a warning for these constants.

Restructure checkpatch's constant finding code a bit to support finding
these binary constants.
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Do not bleat a message on nominally acceptable CamelCase uses that are
separated by an _ like drm_core_has_MTRR.

CamelCase tests are also a bit noisy against certain types of code
acceptable to some kernel developers.

Make the test applicable only with --strict.
Signed-off-by: NJoe Perches <joe@perches.com>
Cc: Andy Whitcroft <apw@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__this_cpu_write doesn't need to be protected by spinlock, AS we are doing
per cpu write with preempt disabled.  And another reason to remove
__this_cpu_write outside of spinlock: __percpu_counter_sum is not an
accurate counter.
Signed-off-by: NFan Du <fan.du@windriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NDave Jones <davej@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert drivers/video/backlight/class to use dev_pm_ops for power
management and remove Legacy PM ops hooks.

With this change, backlight class registers suspend/resume callbacks via
class->pm (dev_pm_ops) instead of Legacy class->suspend/resume.  When
__device_suspend() runs call-backs, it will find class->pm ops for the
backlight class.

[jg1.han@samsung.com: add CONFIG_PM_SLEEP to suspend/resume functions]
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Shuah Khan <shuahkhan@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add myself as co-maintainer for the backlight subsystem.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions allow the driver core to automatically clean up any
allocation made by lcd drivers.  Thus it simplifies the error paths.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These functions allow the driver core to automatically clean up any
allocation made by backlight drivers.  Thus it simplifies the error
paths.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063 ("device-core: Ensure drvdata
= NULL when no driver is bound").

Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063 ("device-core: Ensure drvdata
= NULL when no driver is bound").

Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063 ("device-core: Ensure drvdata
= NULL when no driver is bound").

Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver core clears the driver data to NULL after device_release or
on probe failure, since commit 0998d063 ("device-core: Ensure drvdata
= NULL when no driver is bound").

Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The masks for the st and osst tape drivers in MAINTAINERS are too
broad and include unrelated files. Make the file list accurate so that
maintainers of these drivers aren't bothered with unrelated work.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Cc: Willem Riede <osst@riede.org>
Cc: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"req.val1 == -1" is valid but it doesn't make sense to check gru_base[-1].
 gru_base[] is a global array.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Robin Holt <holt@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There have never been any real users of MEMSET operations since they
have been introduced in January 2007 by commit 7405f74b ("dmaengine:
refactor dmaengine around dma_async_tx_descriptor").  Therefore remove
support for them for now, it can be always brought back when needed.

[sebastian.hesselbarth@gmail.com: fix drivers/dma/mv_xor]
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Acked-by: NDan Williams <djbw@fb.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Olof Johansson <olof@lixom.net>
Cc: Kevin Hilman <khilman@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.

Addresses https://bugs.freedesktop.org/show_bug.cgi?id=65256Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reported-by: NCornel Panceac <cpanceac@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <annndddrr@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.

Addresses https://bugs.freedesktop.org/show_bug.cgi?id=63860

[jani.nikula@intel.com: use DMI_EXACT_MATCH for board name.]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reported-by: <annndddrr@gmail.com>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dmi_match() considers a substring match to be a successful match.  This is
not always sufficient to distinguish between DMI data for different
systems.  Add support for exact string matching using strcmp() in addition
to the substring matching using strstr().

The specific use case in the i915 driver is to allow us to use an exact
match for D510MO, without also incorrectly matching D510MOV:

  {
	.ident = "Intel D510MO",
	.matches = {
		DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
		DMI_EXACT_MATCH(DMI_BOARD_NAME, "D510MO"),
	},
  }
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Cc: <annndddrr@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Change do_sysinfo() to use get_monotonic_boottime() instead of
do_posix_clock_monotonic_gettime() + monotonic_to_bootbased().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: NJohn Stultz <johnstul@us.ibm.com>
Cc: Tomas Janousek <tjanouse@redhat.com>
Cc: Tomas Smetana <tsmetana@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If LINUX_REBOOT_CMD_HALT for reboot failed, the message "cannot halt" will
stay on the same line with the next message, so append a '\n'.
Signed-off-by: Nliguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add functionality to serialize the output from dump_stack() to avoid
mangling of the output when dump_stack is called simultaneously from
multiple cpus.

[akpm@linux-foundation.org: fix comment indenting, avoid inclusion of <asm/> files - use <linux/> where possiblem fix uniprocessor build (__dump_stack undefined), remove unneeded ifdef around smp.h inclusion]
Signed-off-by: NAlex Thorlton <athorlton@sgi.com>
Reported-by: NRuss Anderson <rja@sgi.com>
Reviewed-by: NRobin Holt <holt@sgi.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Calling kthread_run with a single name parameter causes it to be handled
as a format string. Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For the workqueue creation interfaces that do not expect format strings,
make sure they cannot accidently be parsed that way.  Additionally, clean
up calls made with a single parameter that would be handled as a format
string.  Many callers are passing potentially dynamic string content, so
use "%s" in those cases to avoid any potential accidents.
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Calling dev_set_name with a single paramter causes it to be handled as a
format string.  Many callers are passing potentially dynamic string
content, so use "%s" in those cases to avoid any potential accidents,
including wrappers like device_create*() and bdi_register().
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix various weird constructions of strncpy(dst, src, strlen(src)).

Length limits should be about the space available in the destination,
not repurposed as a method to either always include or always exclude a
trailing NULL byte.  Either the NULL should always be copied (using
strlcpy), or it should not be copied (using something like memcpy).
Readable code should not depend on the weird behavior of strncpy when it
hits the length limit.  Better to avoid the anti-pattern entirely.

[akpm@linux-foundation.org: revert getdelays.c part due to missing bsd/string.h]
Signed-off-by: NKees Cook <keescook@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>	[staging]
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[acpi]
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ursula Braun <ursula.braun@de.ibm.com>
Cc: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Sparse generates a false positive when you pass a __user or __iomem
pointer to the IS_ERR() functions.

  drivers/rtc/rtc-ds1286.c:344:36: sparse: incorrect type in argument 1 (different address spaces)
  drivers/rtc/rtc-ds1286.c:344:36:    expected void const *ptr
  drivers/rtc/rtc-ds1286.c:344:36:    got unsigned int [noderef] [usertype] <asn:2>*rtcregs

We can silence these by adding a __force here and upgrading to Sparse
v0.4.5-rc1 or later.

This change has no effect when using current Sparse releases.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NChristopher Li <sparse@chrisli.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

'cmdline' is a NUL terminated string, when its length < 4, memcmp()
will cause memory access out of boundary.

So use strncmp() instead of memcmp().
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since die_if_kernel() is an extern common used function, better always
check the buffer length to avoid memory overflow by a long 'str'.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_iter() is too hard to follow.  Factor out the lockless reclaim
iterator loading and updating so it's easier to follow the big picture.

Also document the iterator invalidation mechanism a bit more extensively.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NZhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>