Use recalled range to invalidate particular layout segments in the layout cache.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Add offset and count parameters to pnfs_update_layout and use them to get
the layout in the pageio path.

Order cache layout segments in the following order:
* offset (ascending)
* length (descending)
* iomode (RW before READ)

Test byte range against the layout segment in use in pnfs_{read,write}_pg_test
so not to coalesce pages not using the same layout segment.

[fix lseg ordering]
[clean up pnfs_find_lseg lseg arg]
[remove unnecessary FIXME]
[fix ordering in pnfs_insert_layout]
[clean up pnfs_insert_layout]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

pnfs deviceids are unique per server, per layout type.
struct nfs_client is currently used to distinguish deviceids from
different nfs servers, yet these may clash between different layout
types on the same server.  Therefore, use the layout driver associated
with each deviceid at insertion time to look it up, unhash, or
delete it.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Note: This functionlaity is incomplete as all layout segments referring to
the 'to be removed device id' need to be reaped, and all in flight I/O drained.

[use be32 res in nfs4_callback_devicenotify]
[use nfs_client to qualify deviceid for cb_notify_deviceid]
[use global deviceid cache for CB_NOTIFY_DEVICEID]
[refactor device cache _lookup_deviceid]
[refactor device cache _find_get_deviceid]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[Bug in new global-device-cache code]
[layout_driver MUST set free_deviceid_node if using dev-cache]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Use the pnfs_layoutdriver_type both as a qualifier for the deviceid,
distinguishing deviceid from different layout types on the server,
and for freeing the layout-driver allocated structure containing the
nfs4_deviceid_node.

[BUG in _deviceid_purge_client]
[layout_driver MUST set free_deviceid_node if using dev-cache]
[let ver < 4.1 compile]
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
[removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Move deviceid cache from the pnfs files layout driver to the
generic layer in preparation for the objects layout driver.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Some definitions in the header file depend on nfs_fs.h so pnfs.h can't
be included independently.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>

Currently, writebacks may end up recursing back into the filesystem due to
GFP_KERNEL direct reclaims in the pnfs subsystem.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

changes LAYOUTGET and GETDEVICEINFO XDR parsing to:
 - not use vmap, which doesn't work on incoherent archs
 - use xdr_stream parsing for all xdr
Signed-off-by: NWeston Andros Adamson <dros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to
the data server (as opposed to the MDS) and the data server WRITE
is not NFS_FILE_SYNC.

Only whole file layout support means that there is only one IOMODE_RW layout
segment.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn>
Tested-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We create three major hooks for the pnfs code.

pnfs_mark_request_commit() is called during writeback_done from
nfs_mark_request_commit, which gives the driver an opportunity to
claim it wants control over commiting a particular req.

pnfs_choose_commit_list() is called from nfs_scan_list
to choose which list a given req should be added to, based on
where we intend to send it for COMMIT.  It is up to the driver
to have preallocated list headers for each destination it may need.

pnfs_commit_list() is how the driver actually takes control, it is
used instead of nfs_commit_list().

In order to pass information between the above functions, we create
a union in nfs_page to hold a lseg (which is possible because the req is
not on any list while in transition), and add some flags to indicate
if we need to use the pnfs code.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@fieldses.org>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need for generic cache with only one user.
Keep a simple hash of deviceids in the filelayout driver.
Signed-off-by: NChristoph Hellwig <hch@infradead.org>
Acked-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Separate the rpc run portion of nfs_read_rpcsetup into a new function
nfs_initiate_read that is called for normal NFS I/O.

Add a pNFS read_pagelist function that is called instead of nfs_intitate_read
for pNFS reads.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn>
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the pnfs_update_layout call location to nfs_pageio_do_add_request().
Grab the lseg sent in the doio function to nfs_read_rpcsetup and attach
it to each nfs_read_data so it can be sent to the layout driver.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add a pg_test layout driver hook which is used to avoid coelescing I/O across
layout stripes.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NOleg Drokin <green@linuxhacker.ru>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare put_lseg and get_lseg to be called from the pNFS I/O code.
Pull common code from pnfs_lseg_locked to call from pnfs_lseg.
Inline pnfs_lseg_locked into it's only caller.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A layout can request return-on-close.  How this interacts with the
forgetful model of never sending LAYOUTRETURNS is a bit ambiguous.
We forget any layouts marked roc, and wait for them to be completely
forgotten before continuing with the close.  In addition, to compensate
for races with any inflight LAYOUTGETs, and the fact that we do not get
any layout stateid back from the server, we set the barrier to the worst
case scenario of current_seqid + number of outstanding LAYOUTGETS.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is the heart of the wave 2 submission.  Add the code to trigger
drain and forget of any afected layouts.  In addition, we set a
"barrier", below which any LAYOUTGET reply is ignored.  This is to
compensate for the fact that we do not wait for outstanding LAYOUTGETs
to complete as per section 12.5.5.2.1 of RFC 5661.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This will be required to allow us to grab reference outside of i_lock.
While we are at it, make put_layout_hdr take the same argument as all the
related functions.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs
using the previous stateid are completed.  This requires choosing the
stateid to encode earlier, so we can abort if one is not available (we
want to use the open stateid, but a LAYOUTGET is already out using
it), and adding a count of the number of outstanding rpc calls using
layout state (which for now consist solely of LAYOUTGETs).
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is to prepare the way for sensible io draining.  Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list.  Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This prepares for future changes, where the layout state needs
to change atomically with several other variables.  In particular,
it will need to know if lo->segs is empty, as we test that instead
of manipulating the NFS_LAYOUT_STATEID_SET bit.  Moreover, the
layoutstateid is not really a read-mostly structure, as it is
written almost as often as it is read.

The behavior of pnfs_get_layout_stateid is also slightly changed, so that
it no longer changes the stateid.  Its name is changed to +pnfs_choose_layoutget_stateid.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

While we are renaming all the fields, change lo->state to lo->plh_flags.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The initialize_mountpoint/uninitialise_mountpoint functions are really about
setting or clearing the layout driver to be used on this filesystem. Change
the names to the more descriptive 'set_layoutdriver/clear_layoutdriver'.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add the ability to actually send LAYOUTGET and GETDEVICEINFO.  This also adds
in the machinery to handle layout state and the deviceid cache.  Note that
GETDEVICEINFO is not called directly by the generic layer.  Instead it
is called by the drivers while parsing the LAYOUTGET opaque data in response
to an unknown device id embedded therein.  RFC 5661 only encodes
device ids within the driver-specific opaque data.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NMike Sager <sager@netapp.com>
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In particular, server reboot will invalidate all layouts.

Note that in order to have an active layout, we must get a successful response
from the server.  To avoid adding that machinery, this patch just includes a
stub that fakes up a successful return.  Since the layout is never referenced
for io, this is not a problem.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

At the start of the io paths, try to grab the relevant layout
information.  This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: NRicardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Allow a module implementing a layout type to register, and
have its mount/umount routines called for filesystems that
the server declares support it.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Andy Adamson<andros@netapp.com>
Signed-off-by: NBian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Put in the infrastructure that uses information returned from the
server at mount to select a layout driver module.

In this patch, a stub is used that always returns "no driver found".
Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com>
Signed-off-by: NDean Hildebrand <dhildebz@umich.edu>
Signed-off-by: NMarc Eshel <eshel@almaden.ibm.com>
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>