Use the TCP_USER_TIMEOUT socket option to advertise to the server
how long we will keep the connection open if there is unacknowledged
data. See RFC5482.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This fixes a regression introduced by commit caf4ccd4 ("SUNRPC:
Make xs_tcp_close() do a socket shutdown rather than a sock_release").
Prior to that commit, the autoclose feature would ensure that an
idle connection would result in the socket being both disconnected and
released, whereas now only gets disconnected.

While the current behaviour is harmless, it does leave the port bound
until either RPC traffic resumes or the RPC client is shut down.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the back channel is disconnected, we can and should just fail the
transmission. The expectation is that the NFSv4.1 server will always
retransmit any outstanding callbacks once the connection is
re-established.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Don't opencode sg_init_one()
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

NFS: NFSoRDMA Client Changes

These patches continue to build up for improving the rsize and wsize that the
NFS client uses when talking over RDMA.  In addition, these patches also add
in scalability enhancements and other bugfixes.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

* tag 'nfs-rdma-for-4.2' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (142 commits)
  xprtrdma: Reduce per-transport MR allocation
  xprtrdma: Stack relief in fmr_op_map()
  xprtrdma: Split rb_lock
  xprtrdma: Remove rpcrdma_ia::ri_memreg_strategy
  xprtrdma: Remove ->ro_reset
  xprtrdma: Remove unused LOCAL_INV recovery logic
  xprtrdma: Acquire MRs in rpcrdma_register_external()
  xprtrdma: Introduce an FRMR recovery workqueue
  xprtrdma: Acquire FMRs in rpcrdma_fmr_register_external()
  xprtrdma: Introduce helpers for allocating MWs
  xprtrdma: Use ib_device pointer safely
  xprtrdma: Remove rr_func
  xprtrdma: Replace rpcrdma_rep::rr_buffer with rr_rxprt
  xprtrdma: Warn when there are orphaned IB objects
  ...

Ensure that we fix the non-NULL stateid case as well.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Client can receives stateid-type error (eg., BAD_STATEID) on SETATTR when
delegation stateid was used. When no open state exists, in case of application
calling truncate() on the file, client has no state to recover and fails with
EIO.

Instead, upon such error, return the bad delegation and then resend the
SETATTR with a zero stateid.

Signed-off: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A truncated fsid showing from /proc/fs/nfsfs/volumes as,
NV SERVER   PORT DEV     FSID              FSC
v4 c0a80881  801 0:43    34931f044c2a439b  no

It should be as,
NV SERVER   PORT DEV          FSID                              FSC
v4 c0a80881  801 0:43         34931f044c2a439b:954c5d830fa4be8c no

The max buffer length for storing "%llx:%llx" format should be
 16 + 1 + 16 + 1 = 34 (16 for %llx, 1 for ':', 1 for '\0').

Also, for storing "%u:%u" of MAJOR() and MINOR() should be
 8 + 1 + 3 + 1 = 13 (8 for 2^24, 1 for ':', 3 for 2^8, 1 for '\0').

v2, add comments for dev/fsid buffer and use sizeof in snprintf.
Signed-off-by: NKinglong Mee <kinglongmee@gmail.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Change the uniform client string generator to dynamically allocate the
NFSv4 client name string buffer. With this patch, we can eliminate the
buffers that are embedded within the "args" structs and simply use the
name string that is hanging off the client.

This uniform string case is a little simpler than the nonuniform since
we don't need to deal with RCU, but we do have two different cases,
depending on whether there is a uniquifier or not.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The way the *_client_string functions work is a little goofy. They build
the string in an on-stack buffer and then use kstrdup to copy it. This
is not only stack-heavy but artificially limits the size of the client
name string. Change it so that we determine the length of the string,
allocate it and then scnprintf into it.

Since the contents of the nonuniform string depend on rcu-managed data
structures, it's possible that they'll change between when we allocate
the string and when we go to fill it. If that happens, free the string,
recalculate the length and try again. If it the mismatch isn't resolved
on the second try then just give up and return -EINVAL.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The spec allows for up to NFS4_OPAQUE_LIMIT (1k). While we'll almost
certainly never use that much, these ops are generally the only ones
in the compound so we might as well allow for them to be that large.

Also, the existing code didn't add in a word for the opaque length
field for either name string. Fix that while we're in there.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

...instead of buffers that are part of their arg structs. We already
hold a reference to the client, so we might as well use the allocated
buffer. In the event that we can't allocate the clp->cl_owner_id, then
just return -ENOMEM.

Note too that we switch from a GFP_KERNEL allocation here to GFP_NOFS.
It's possible we could end up trying to do a SETCLIENTID or EXCHANGE_ID
in order to reclaim some memory, and the GFP_KERNEL allocations in the
existing code could cause recursion back into NFS reclaim.
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The current buffer is much too small if you have a relatively long
hostname. Bring it up to the size of the one that SETCLIENTID has.

Cc: <stable@vger.kernel.org>
Reported-by: NMichael Skralivetsky <michael.skralivetsky@primarydata.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the sending queue has a task without ->rq_cong set at the front,
and then a number of tasks with ->rq_cong set such that they use
the entire congestion window, then the queue deadlocks.  The first
entry cannot be processed until later entries complete.

This scenario has been seen with a client using UDP to access a server,
and the network connection breaking for a period of time - it doesn't
recover.

It never really makes sense for an ->rq_cong request to be on the ->sending
queue, but it can happen when a request is being retried, and finds
the transport if locked (XPRT_LOCKED).  In this case we simple call
__xprt_put_cong() and the deadlock goes away.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Reduce resource consumption per-transport to make way for increasing
the credit limit and maximum r/wsize. Pre-allocate fewer MRs.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

fmr_op_map() declares a 64 element array of u64 in automatic
storage. This is 512 bytes (8 * 64) on the stack.

Instead, when FMR memory registration is in use, pre-allocate a
physaddr array for each rpcrdma_mw.

This is a pre-requisite for increasing the r/wsize maximum for
FMR on platforms with 4KB pages.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

/proc/lock_stat showed contention between rpcrdma_buffer_get/put
and the MR allocation functions during I/O intensive workloads.

Now that MRs are no longer allocated in rpcrdma_buffer_get(),
there's no reason the rb_mws list has to be managed using the
same lock as the send/receive buffers. Split that lock. The
new lock does not need to disable interrupts because buffer
get/put is never called in an interrupt context.

struct rpcrdma_buffer is re-arranged to ensure rb_mwlock and rb_mws
are always in a different cacheline than rb_lock and the buffer
pointers.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: This field is no longer used.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

An RPC can exit at any time. When it does so, xprt_rdma_free() is
called, and it calls ->op_unmap().

If ->ro_reset() is running due to a transport disconnect, the two
methods can race while processing the same rpcrdma_mw. The results
are unpredictable.

Because of this, in previous patches I've altered ->ro_map() to
handle MR reset. ->ro_reset() is no longer needed and can be
removed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: Remove functions no longer used to recover broken FRMRs.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Acquiring 64 MRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because most modern adapters
can transfer 100s of KBs of payload using just a single MR.

Instead, acquire MRs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.

Note: commit 539431a4 ("xprtrdma: Don't invalidate FRMRs if
registration fails") is reverted: There is now a valid case where
registration can fail (with -ENOMEM) but the QP is still in RTS.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

After a transport disconnect, FRMRs can be left in an undetermined
state. In particular, the MR's rkey is no good.

Currently, FRMRs are fixed up by the transport connect worker, but
that can race with ->ro_unmap if an RPC happens to exit while the
transport connect worker is running.

A better way of dealing with broken FRMRs is to detect them before
they are re-used by ->ro_map. Such FRMRs are either already invalid
or are owned by the sending RPC, and thus no race with ->ro_unmap
is possible.

Introduce a mechanism for handing broken FRMRs to a workqueue to be
reset in a context that is appropriate for allocating resources
(ie. an ib_alloc_fast_reg_mr() API call).

This mechanism is not yet used, but will be in subsequent patches.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Acquiring 64 FMRs in rpcrdma_buffer_get() while holding the buffer
pool lock is expensive, and unnecessary because FMR mode can
transfer up to a 1MB payload using just a single ib_fmr.

Instead, acquire ib_fmrs one-at-a-time as chunks are registered, and
return them to rb_mws immediately during deregistration.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

We eventually want to handle allocating MWs one at a time, as
needed, instead of grabbing 64 and throwing them at each RPC in the
pipeline.

Add a helper for grabbing an MW off rb_mws, and a helper for
returning an MW to rb_mws. These will be used in a subsequent patch.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The connect worker can replace ri_id, but prevents ri_id->device
from changing during the lifetime of a transport instance. The old
ID is kept around until a new ID is created and the ->device is
confirmed to be the same.

Cache a copy of ri_id->device in rpcrdma_ia and in rpcrdma_rep.
The cached copy can be used safely in code that does not serialize
with the connect worker.

Other code can use it to save an extra address generation (one
pointer dereference instead of two).
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

A posted rpcrdma_rep never has rr_func set to anything but
rpcrdma_reply_handler.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: Instead of carrying a pointer to the buffer pool and
the rpc_xprt, carry a pointer to the controlling rpcrdma_xprt.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

WARN during transport destruction if ib_dealloc_pd() fails. This is
a sign that xprtrdma orphaned one or more RDMA API objects at some
point, which can pin lower layer kernel modules and cause shutdown
to hang.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NDevesh Sharma <devesh.sharma@avagotech.com>
Tested-By: NDevesh Sharma <devesh.sharma@avagotech.com>
Reviewed-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

A drop should really only be done when the frame is malformed or we have
reason to think that there is some sort of DoS going on. When we get an
RPC with bad auth, we should send back an error instead.

Cc: Andy Adamson <William.Adamson@netapp.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Cross-compile test on ARCH=mn10300:

In file included from include/linux/list.h:8:0,
                 from include/linux/wait.h:6,
                 from include/linux/fs.h:6,
                 from include/linux/debugfs.h:18,
                 from net/sunrpc/debugfs.c:7:
net/sunrpc/debugfs.c: In function 'fault_disconnect_write':
include/linux/kernel.h:723:17: warning: comparison of distinct pointer
types lacks a cast
    (void) (&_min1 == &_min2);  \
                   ^
>> net/sunrpc/debugfs.c:307:8: note: in expansion of macro 'min'
    len = min(len, sizeof(buffer) - 1);

Fixes: ('SUNRPC: Transport fault injection')
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

In little endian cases, the macro htonl unfolds to __swab32 which
provides special case for constants. In big endian cases,
__constant_htonl and htonl expand directly to the same expression.
So, replace __constant_htonl with htonl with the goal of getting
rid of the definition of __constant_htonl completely.

The semantic patch that performs this transformation is as follows:

@@expression x;@@

- __constant_htonl(x)
+ htonl(x)
Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It has been exceptionally useful to exercise the logic that handles
local immediate errors and RDMA connection loss.  To enable
developers to test this regularly and repeatably, add logic to
simulate connection loss every so often.

Fault injection is disabled by default. It is enabled with

  $ sudo echo xxx > /sys/kernel/debug/sunrpc/inject_fault/disconnect

where "xxx" is a large positive number of transport method calls
before a disconnect. A value of several thousand is usually a good
number that allows reasonable forward progress while still causing a
lot of connection drops.

These hooks are disabled when SUNRPC_DEBUG is turned off.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

This was only ever set to nfs_writeback_release_common(), a function
which is completely empty.  Let's just drop this function pointer and
simplify the code a bit.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

nfs4_proc_lookup_common is supposed to return a posix error, we have to
handle any error returned that isn't errno
Reported-by: NOlga Kornievskaia <kolga@netapp.com>
Signed-off-by: NFrank S. Filz <ffilzlnx@mindspring.com>
Signed-off-by: NDominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

RDMA xprts don't have a sock_xprt, but an rdma_xprt, so the
xs_swapper_enable/disable functions will likely oops when fed an RDMA
xprt. Turn these functions into rpc_xprt_ops so that that doesn't
occur. For now the RDMA versions are no-ops that just return -EINVAL
on an attempt to swapon.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It's possible that we could race with a call to xs_reset_transport, in
which case the xprt->inet pointer could be zeroed out while we're
accessing it. Lock the xprt before we try to set memalloc on it.

Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We currently increment the memalloc_socks counter if we have a xprt that
is associated with a swapfile. That socket can be replaced however
during a reconnect event, and the memalloc_socks counter is never
decremented if that occurs.

When tearing down a xprt socket, check to see if the xprt is set up for
swapping and sk_clear_memalloc before releasing the socket if so.
Acked-by: NMel Gorman <mgorman@suse.de>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Split xs_swapper into enable/disable functions and eliminate the
"enable" flag.

Currently, it's racy if you have multiple swapon/swapoff operations
running in parallel over the same xprt. Also fix it so that we only
set it to a memalloc socket on a 0->1 transition and only clear it
on a 1->0 transition.

Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: NJeff Layton <jeff.layton@primarydata.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>