- 29 4月, 2016 7 次提交
-
-
由 Dean Luick 提交于
The ui device llseek had a mistake with SEEK_END and did not fully follow seek semantics. Correct all this by using a kernel supplied function for fixed size devices. Cc: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mitko Haralanov 提交于
Attempting to free resources which have not been allocated and initialized properly led to the following kernel backtrace: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] PGD 852a43067 PUD 85d4a6067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 2831 Comm: osu_bw Tainted: G IO 3.12.18-wfr+ #1 task: ffff88085b15b540 ti: ffff8808588fe000 task.ti: ffff8808588fe000 RIP: 0010:[<ffffffffa09658fe>] [<ffffffffa09658fe>] unlock_exp_tids.isra.8+0x2e/0x120 [hfi1] RSP: 0018:ffff8808588ffde0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff880858a31800 RCX: 0000000000000000 RDX: ffff88085d971bc0 RSI: ffff880858a318f8 RDI: ffff880858a318c0 RBP: ffff8808588ffe20 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88087ffd6f40 R11: 0000000001100348 R12: ffff880852900000 R13: ffff880858a318c0 R14: 0000000000000000 R15: ffff88085d971be8 FS: 00007f4674e83740(0000) GS:ffff88087f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000085c377000 CR4: 00000000001407f0 Stack: ffffffffa0941a71 ffff880858a318f8 ffff88085d971bc0 ffff880858a31800 ffff880852900000 ffff880858a31800 00000000003ffff7 ffff88085d971bc0 ffff8808588ffe60 ffffffffa09663fc ffff8808588ffe60 ffff880858a31800 Call Trace: [<ffffffffa0941a71>] ? find_mmu_handler+0x51/0x70 [hfi1] [<ffffffffa09663fc>] hfi1_user_exp_rcv_free+0x6c/0x120 [hfi1] [<ffffffffa0932809>] hfi1_file_close+0x1a9/0x340 [hfi1] [<ffffffff8116c189>] __fput+0xe9/0x270 [<ffffffff8116c35e>] ____fput+0xe/0x10 [<ffffffff81065707>] task_work_run+0xa7/0xe0 [<ffffffff81002969>] do_notify_resume+0x59/0x80 [<ffffffff814ffc1a>] int_signal+0x12/0x17 This commit re-arranges the context initialization code in a way that would allow for context event flags to be used to determine whether the context has been successfully initialized. In turn, this can be used to skip the resource de-allocation if they were never allocated in the first place. Fixes: 3abb33ac ("staging/hfi1: Add TID cache receive init and free funcs") Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mike Marciniszyn 提交于
The iowait_sdma_drained() callback lacked locking to protect the qp s_flags field. This causes the s_flags to be out of sync on multiple CPUs, potentially corrupting the s_flags. Fixes: a545f530 ("staging/rdma/hfi: fix CQ completion order issue") Reviewed-by: NSebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jubin John 提交于
call_send is used to determine whether to send immediately or schedule a send for later. The current logic in rdmavt is inverted and has a negative impact on the latency of the hfi1 and qib drivers. Fix this regression by correctly calling send immediately when call_send is set. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: NJubin John <jubin.john@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mitko Haralanov 提交于
The routine used by the SDMA cache to handle already cached nodes can extend an already existing node. In its error handling code, the routine will unpin pages when not all pages of the buffer extension were pinned. There was a bug in that part of the routine, which would mistakenly unpin pages from the original set rather than the newly pinned pages. This commit fixes that bug by offsetting the page array to the proper place pointing at the beginning of the newly pinned pages. Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mitko Haralanov 提交于
The locking around the interval RB tree is designed to prevent access to the tree while it's being modified. The locking in its current form is too overzealous, which is causing a deadlock in certain cases with the following backtrace: Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0 CPU: 0 PID: 5836 Comm: IMB-MPI1 Tainted: G O 3.12.18-wfr+ #1 0000000000000000 ffff88087f206c50 ffffffff814f1caa ffffffff817b53f0 ffff88087f206cc8 ffffffff814ecd56 0000000000000010 ffff88087f206cd8 ffff88087f206c78 0000000000000000 0000000000000000 0000000000001662 Call Trace: <NMI> [<ffffffff814f1caa>] dump_stack+0x45/0x56 [<ffffffff814ecd56>] panic+0xc2/0x1cb [<ffffffff810d4370>] ? restart_watchdog_hrtimer+0x50/0x50 [<ffffffff810d4432>] watchdog_overflow_callback+0xc2/0xd0 [<ffffffff81109b4e>] __perf_event_overflow+0x8e/0x2b0 [<ffffffff8110a714>] perf_event_overflow+0x14/0x20 [<ffffffff8101c906>] intel_pmu_handle_irq+0x1b6/0x390 [<ffffffff814f927b>] perf_event_nmi_handler+0x2b/0x50 [<ffffffff814f8ad8>] nmi_handle.isra.3+0x88/0x180 [<ffffffff814f8d39>] do_nmi+0x169/0x310 [<ffffffff814f8177>] end_repeat_nmi+0x1e/0x2e [<ffffffff81272600>] ? unmap_single+0x30/0x30 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 [<ffffffff814f780d>] ? _raw_spin_lock_irqsave+0x2d/0x40 <<EOE>> <IRQ> [<ffffffffa056c4a8>] hfi1_mmu_rb_search+0x38/0x70 [hfi1] [<ffffffffa05919cb>] user_sdma_free_request+0xcb/0x120 [hfi1] [<ffffffffa0593393>] user_sdma_txreq_cb+0x263/0x350 [hfi1] [<ffffffffa057fad7>] ? sdma_txclean+0x27/0x1c0 [hfi1] [<ffffffffa0593130>] ? user_sdma_send_pkts+0x1710/0x1710 [hfi1] [<ffffffffa057fdd6>] sdma_make_progress+0x166/0x480 [hfi1] [<ffffffff810762c9>] ? ttwu_do_wakeup+0x19/0xd0 [<ffffffffa0581c7e>] sdma_engine_interrupt+0x8e/0x100 [hfi1] [<ffffffffa0546bdd>] sdma_interrupt+0x5d/0xa0 [hfi1] [<ffffffff81097e57>] handle_irq_event_percpu+0x47/0x1d0 [<ffffffff81098017>] handle_irq_event+0x37/0x60 [<ffffffff8109aa5f>] handle_edge_irq+0x6f/0x120 [<ffffffff810044af>] handle_irq+0xbf/0x150 [<ffffffff8104c9b7>] ? irq_enter+0x17/0x80 [<ffffffff8150168d>] do_IRQ+0x4d/0xc0 [<ffffffff814f7c6a>] common_interrupt+0x6a/0x6a <EOI> [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff814f56c6>] __schedule+0x3b6/0x7e0 [<ffffffff810763a6>] __cond_resched+0x26/0x30 [<ffffffff814f5eda>] _cond_resched+0x3a/0x50 [<ffffffff814f4f82>] down_write+0x12/0x30 [<ffffffffa0591619>] hfi1_release_user_pages+0x69/0x90 [hfi1] [<ffffffffa059173a>] sdma_rb_remove+0x9a/0xc0 [hfi1] [<ffffffffa056c00d>] __mmu_rb_remove.isra.5+0x5d/0x70 [hfi1] [<ffffffffa056c536>] hfi1_mmu_rb_remove+0x56/0x70 [hfi1] [<ffffffffa059427b>] hfi1_user_sdma_process_request+0x74b/0x1160 [hfi1] [<ffffffffa055c763>] hfi1_aio_write+0xc3/0x100 [hfi1] [<ffffffff8116a14c>] do_sync_readv_writev+0x4c/0x80 [<ffffffff8116b58b>] do_readv_writev+0xbb/0x230 [<ffffffff811a9da1>] ? fsnotify+0x241/0x320 [<ffffffff81073524>] ? finish_task_switch+0x54/0xe0 [<ffffffff8116b795>] vfs_writev+0x35/0x60 [<ffffffff8116b8c9>] SyS_writev+0x49/0xc0 [<ffffffff810cd876>] ? __audit_syscall_exit+0x1f6/0x2a0 [<ffffffff814ff992>] system_call_fastpath+0x16/0x1b As evident from the backtrace above, the process was being put to sleep while holding the lock. Limiting the scope of the lock only to the RB tree operation fixes the above error allowing for proper locking and the process being put to sleep when needed. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Mitko Haralanov 提交于
There is a potential kernel crash when the MMU notifier calls the invalidation routines in the hfi1 pinned page caching code for sdma. The invalidation routine could call the remove callback for the node, which in turn ends up dereferencing the current task_struct to get a pointer to the mm_struct. However, the mm_struct pointer could be NULL resulting in the following backtrace: BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 IP: [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] 15 task: ffff88085e66e080 ti: ffff88085c244000 task.ti: ffff88085c244000 RIP: 0010:[<ffffffffa041f75a>] [<ffffffffa041f75a>] sdma_rb_remove+0xaa/0x100 [hfi1] RSP: 0000:ffff88085c245878 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88105b9bbd40 RCX: ffffea003931a830 RDX: 0000000000000004 RSI: ffff88105754a9c0 RDI: ffff88105754a9c0 RBP: ffff88085c245890 R08: ffff88105b9bbd70 R09: 00000000fffffffb R10: ffff88105b9bbd58 R11: 0000000000000013 R12: ffff88105754a9c0 R13: 0000000000000001 R14: 0000000000000001 R15: ffff88105b9bbd40 FS: 0000000000000000(0000) GS:ffff88107ef40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a8 CR3: 0000000001a0b000 CR4: 00000000001407e0 Stack: ffff88105b9bbd40 ffff88080ec481a8 ffff88080ec481b8 ffff88085c2458c0 ffffffffa03fa00e ffff88080ec48190 ffff88080ed9cd00 0000000001024000 0000000000000000 ffff88085c245920 ffffffffa03fa0e7 0000000000000282 Call Trace: [<ffffffffa03fa00e>] __mmu_rb_remove.isra.5+0x5e/0x70 [hfi1] [<ffffffffa03fa0e7>] mmu_notifier_mem_invalidate+0xc7/0xf0 [hfi1] [<ffffffffa03fa143>] mmu_notifier_page+0x13/0x20 [hfi1] [<ffffffff81156dd0>] __mmu_notifier_invalidate_page+0x50/0x70 [<ffffffff81140bbb>] try_to_unmap_one+0x20b/0x470 [<ffffffff81141ee7>] try_to_unmap_anon+0xa7/0x120 [<ffffffff81141fad>] try_to_unmap+0x4d/0x60 [<ffffffff8111fd7b>] shrink_page_list+0x2eb/0x9d0 [<ffffffff81120ab3>] shrink_inactive_list+0x243/0x490 [<ffffffff81121491>] shrink_lruvec+0x4c1/0x640 [<ffffffff81121641>] shrink_zone+0x31/0x100 [<ffffffff81121b0f>] kswapd_shrink_zone.constprop.62+0xef/0x1c0 [<ffffffff811229e3>] kswapd+0x403/0x7e0 [<ffffffff811225e0>] ? shrink_all_memory+0xf0/0xf0 [<ffffffff81068ac0>] kthread+0xc0/0xd0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 [<ffffffff814ff8ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81068a00>] ? insert_kthread_work+0x40/0x40 To correct this, the mm_struct passed to us by the MMU notifier is used (which is what should have been done to begin with). This avoids the broken derefences and ensures that the correct mm_struct is used. Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: NDean Luick <dean.luick@intel.com> Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 28 4月, 2016 2 次提交
-
-
由 Sagi Grimberg 提交于
Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Acked-by: NNicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by: NChristoph Hellwig <hch@lst.de> Tested-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSagi Grimberg <sagig@grimberg.me> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 27 4月, 2016 5 次提交
-
-
由 Hariprasad S 提交于
For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Reviewed-by: NLeon Romanovsky <leon@leon.nu> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Steve Wise 提交于
In c4iw_drain_sq/rq(), if the particular queue is already empty then don't block. Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions') Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Steve Wise 提交于
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb3 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: c1340e8a ("iw_cxgb3: support for iWARP port mapping") Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Steve Wise 提交于
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp port map daemon. But iw_cxgb4 did not initialize this field which causes intermittent registration failures based on the contents of the uninitialized memory. Fixes: 170003c8 ("iw_cxgb4: remove port mapper related code") Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
The drain_rq function expects a normal receive qp to drain. A qp can only have either a normal rq or an srq. If there is an srq, there is no rq to drain. Until the API supports draining SRQs, simply skip draining the rq when the qp has an srq attached. Fixes: 765d6774 ("IB: new common API for draining queues") Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 23 4月, 2016 1 次提交
-
-
由 Doug Ledford 提交于
When we fail to find the default gid index, we can't continue processing in this routine or else we will pass a negative index to later routines resulting in invalid memory access attempts and a kernel oops. Fixes: 03db3a2d (IB/core: Add RoCE GID table management) Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 06 4月, 2016 2 次提交
-
-
由 Arnd Bergmann 提交于
gcc finds that the i40iw_make_cm_node() function in the recently added i40iw driver uses an uninitilized variable as an index into an array if CONFIG_IPV6 is disabled and the driver uses IPv6 mode: drivers/infiniband/hw/i40iw/i40iw_cm.c: In function 'i40iw_make_cm_node': drivers/infiniband/hw/i40iw/i40iw_cm.c:2206:52: error: 'arpindex' may be used uninitialized in this function [-Werror=maybe-uninitialized] ether_addr_copy(cm_node->rem_mac, iwdev->arp_table[arpindex].mac_addr); As far as I can tell, this code path can not be used because the ipv4 variable is always set with CONFIG_IPV6 is disabled, but it's better to be sure and prevent the undefined behavior, as well as shut up that warning in a proper way. This adds an 'else' clause for the case we get the warning about, causing the function to return an error in a controlled way. To avoid adding extra mess with combined io()/#ifdef clauses, I'm also converting the existing #ifdef into a more readable if(IS_ENABLED()) check. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: f27b4746 ("i40iw: add connection management code") Acked-by: NMustafa Ismail <Mustafa.ismail@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Arnd Bergmann 提交于
The previous patch that added a couple of callback functions put the declarations inside of an #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING, which causes the build to fail if that option is disabled: drivers/infiniband/hw/mlx5/main.c: In function 'mlx5_ib_add': drivers/infiniband/hw/mlx5/main.c:2358:31: error: 'mlx5_ib_get_vf_config' undeclared (first use in this function) This moves the four declarations below the #ifdef section so they are always available. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: eff901d3 ("IB/mlx5: Implement callbacks for manipulating VFs") Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NEli Cohen <eli@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 03 4月, 2016 9 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Misc kernel side fixes: - fix event leak - fix AMD PMU driver bug - fix core event handling bug - fix build bug on certain randconfigs Plus misc tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/ibs: Fix pmu::stop() nesting perf/core: Don't leak event in the syscall error path perf/core: Fix time tracking bug with multiplexing perf jit: genelf makes assumptions about endian perf hists: Fix determination of a callchain node's childlessness perf tools: Add missing initialization of perf_sample.cpumode in synthesized samples perf tools: Fix build break on powerpc perf/x86: Move events_sysfs_show() outside CPU_SUP_INTEL perf bench: Fix detached tarball building due to missing 'perf bench memcpy' headers perf tests: Fix tarpkg build test error output redirection
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull core kernel fixes from Ingo Molnar: "This contains the nohz/atomic cleanup/fix for the fetch_or() ugliness you noted during the original nohz pull request, plus there's also misc fixes: - fix liblockdep build bug - fix uapi header build bug - print more lockdep hash collision info to help debug recent reports of hash collisions - update MAINTAINERS email address" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Update my email address locking/lockdep: Print chain_key collision information uapi/linux/stddef.h: Provide __always_inline to userspace headers tools/lib/lockdep: Fix unsupported 'basename -s' in run_tests.sh locking/atomic, sched: Unexport fetch_or() timers/nohz: Convert tick dependency mask to atomic_t locking/atomic: Introduce atomic_fetch_or()
-
由 Linus Torvalds 提交于
Commit 840f5b05 ("media: au0828 disable tuner to demod link in au0828_media_device_register()") removed all uses of the 'dtv_demod', but left the variable itself around. Remove it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "This lot contains: - Some fixups for the fallout of the topology consolidation which unearthed AMD/Intel inconsistencies - Documentation for the x86 topology management - Support for AMD advanced power management bits - Two simple cleanups removing duplicated code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add advanced power management bits x86/thread_info: Merge two !__ASSEMBLY__ sections x86/cpufreq: Remove duplicated TDP MSR macro definitions x86/Documentation: Start documenting x86 topology x86/cpu: Get rid of compute_unit_id perf/x86/amd: Cleanup Fam10h NB event constraints x86/topology: Fix AMD core count
-
git://github.com/andersson/remoteproc由 Linus Torvalds 提交于
Pull remoteproc fix from Bjorn Andersson: "Fix incorrect error check in the ST remoteproc driver and advertise the newly created linux-remoteproc mailing list" * tag 'rproc-v4.6-rc1' of git://github.com/andersson/remoteproc: MAINTAINERS: Add mailing list for remote processor subsystems remoteproc: st: fix check of syscon_regmap_lookup_by_phandle() return value
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "This includes fixes from HCH for -rc1 configfs default_groups conversion changes that ended up breaking some iscsi-target default_groups, along with Sagi's ib_drain_qp() conversion for iser-target to use the common caller now available to RDMA kernel consumers in v4.6+ code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: add a new add_wwn_groups fabrics method target: initialize the nacl base CIT begfore init_nodeacl target: remove ->fabric_cleanup_nodeacl iser-target: Use ib_drain_qp
-
由 Linus Torvalds 提交于
Commit d4edcf0d ("mm/gup: Switch all callers of get_user_pages() to not pass tsk/mm") switched get_user_pages() callers to the simpler model where they no longer pass in the thread and mm pointer. But since then we've merged changes to a few drivers that re-introduce use of the old interface. Let's fix them up. They continued to work fine (thanks to the truly disgusting macros introduced in commit cde70140: "mm/gup: Overload get_user_pages() functions"), but cause unnecessary build noise. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/configfs由 Linus Torvalds 提交于
Pull configfs fix from Christoph Hellwig: "A trivial fix to the recently introduced binary attribute helper macros" * tag 'configfs-for-linus-2' of git://git.infradead.org/users/hch/configfs: configfs: fix CONFIGFS_BIN_ATTR_[RW]O definitions
-
- 02 4月, 2016 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Missing device reference in IPSEC input path results in crashes during device unregistration. From Subash Abhinov Kasiviswanathan. 2) Per-queue ISR register writes not being done properly in macb driver, from Cyrille Pitchen. 3) Stats accounting bugs in bcmgenet, from Patri Gynther. 4) Lightweight tunnel's TTL and TOS were swapped in netlink dumps, from Quentin Armitage. 5) SXGBE driver has off-by-one in probe error paths, from Rasmus Villemoes. 6) Fix race in save/swap/delete options in netfilter ipset, from Vishwanath Pai. 7) Ageing time of bridge not set properly when not operating over a switchdev device. Fix from Haishuang Yan. 8) Fix GRO regression wrt nested FOU/GUE based tunnels, from Alexander Duyck. 9) IPV6 UDP code bumps wrong stats, from Eric Dumazet. 10) FEC driver should only access registers that actually exist on the given chipset, fix from Fabio Estevam. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) net: mvneta: fix changing MTU when using per-cpu processing stmmac: fix MDIO settings Revert "stmmac: Fix 'eth0: No PHY found' regression" stmmac: fix TX normal DESC net: mvneta: use cache_line_size() to get cacheline size net: mvpp2: use cache_line_size() to get cacheline size net: mvpp2: fix maybe-uninitialized warning tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filter net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband card rtnl: fix msg size calculation in if_nlmsg_size() fec: Do not access unexisting register in Coldfire net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES net: dsa: mv88e6xxx: Clear the PDOWN bit on setup net: dsa: mv88e6xxx: Introduce _mv88e6xxx_phy_page_{read, write} bpf: make padding in bpf_tunnel_key explicit ipv6: udp: fix UDP_MIB_IGNOREDMULTI updates bnxt_en: Fix ethtool -a reporting. bnxt_en: Fix typo in bnxt_hwrm_set_pause_common(). bnxt_en: Implement proper firmware message padding. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "A handful of const updates for reset ops and a couple fixes to the newly introduced IPQ4019 clock driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: ipq4019: add some fixed clocks for ddrppl and fepll clk: qcom: ipq4019: switch remaining defines to enums clk: qcom: Make reset_control_ops const clk: tegra: Make reset_control_ops const clk: sunxi: Make reset_control_ops const clk: atlas7: Make reset_control_ops const clk: rockchip: Make reset_control_ops const clk: mmp: Make reset_control_ops const clk: mediatek: Make reset_control_ops const
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fix from Rafael J. Wysocki: "Just one fix for a nasty boot failure on some systems based on Intel Skylake that shipped with broken firmware where enabling hardware-coordinated P-states management (HWP) causes a faulty interrupt handler in SMM to be invoked and crash the system (Srinivas Pandruvada)" * tag 'pm+acpi-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / processor: Request native thermal interrupt handling via _OSC
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "11 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: .mailmap: add Christophe Ricard Make CONFIG_FHANDLE default y mm/page_isolation.c: fix the function comments oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head mm/page_isolation: fix tracepoint to mirror check function behavior mm/rmap: batched invalidations should use existing api x86/mm: TLB_REMOTE_SEND_IPI should count pages mm: fix invalid node in alloc_migrate_target() include/linux/huge_mm.h: return NULL instead of false for pmd_trans_huge_lock() mm, kasan: fix compilation for CONFIG_SLAB MAINTAINERS: orangefs mailing list is subscribers-only
-
由 Rafael J. Wysocki 提交于
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "This has a few fixes Dave Sterba had queued up. These are all pretty small, but since they were tested I decided against waiting for more" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: transaction_kthread() is not freezable btrfs: cleaner_kthread() doesn't need explicit freeze btrfs: do not write corrupted metadata blocks to disk btrfs: csum_tree_block: return proper errno value
-
git://github.com/martinbrandenburg/linux由 Linus Torvalds 提交于
Pull OrangeFS fixes from Martin Brandenburg: "Two bugfixes for OrangeFS. One is a reference counting bug and the other is a typo in client minimum version" * tag 'for-linus' of git://github.com/martinbrandenburg/linux: orangefs: minimum userspace version is 2.9.3 orangefs: don't put readdir slot twice
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Will Deacon: - fix oops when patching in alternative sequences on big-endian CPUs - reconcile asm/perf_event.h after merge window fallout with KVM ARM - defconfig updates * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: defconfig: updates for 4.6 arm64: perf: Move PMU register related defines to asm/perf_event.h arm64: opcodes.h: Add arm big-endian config options before including arm header
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes: - a fix in ALSA timer core to avoid possible BUG() trigger - a fix in ALSA timer core 32bit compat layer - a few HD-audio quirks for ASUS and HP machines - AMD HD-audio HDMI controller quirks - fixes of USB-audio double-free at some error paths - a fix for memory leak in DICE driver at hotunplug" * tag 'sound-4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: timer: Use mod_timer() for rearming the system timer ALSA: hda - fix front mic problem for a HP desktop ALSA: usb-audio: Fix double-free in error paths after snd_usb_add_audio_stream() call ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver caps ALSA: dice: fix memory leak when unplugging ALSA: hda - Apply fix for white noise on Asus N550JV, too ALSA: hda - Fix white noise on Asus N750JV headphone ALSA: hda - Asus N750JV external subwoofer fixup ALSA: timer: fix gparams ioctl compatibility for different architectures
-
由 Christophe Ricard 提交于
Different computers had different settings in the mail client. Some contributions appear as Christophe Ricard, others as Christophe RICARD. Signed-off-by: NChristophe Ricard <christophe-h.ricard@st.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Newer Fedora and OpenSUSE didn't boot with my standard configuration. It took me some time to figure out why, in fact I had to write a script to try different config options systematically. The problem is that something (systemd) in dracut depends on CONFIG_FHANDLE, which adds open by file handle syscalls. While it is set in defconfigs it is very easy to miss when updating older configs because it is not default y. Make it default y and also depend on EXPERT, as dracut use is likely widespread. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Neil Zhang 提交于
Commit fea85cff ("mm/page_isolation.c: return last tested pfn rather than failure indicator") changed the meaning of the return value. Let's change the function comments as well. Signed-off-by: NNeil Zhang <neilzhang1123@hotmail.com> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Commit bb29902a ("oom, oom_reaper: protect oom_reaper_list using simpler way") has simplified the check for tasks already enqueued for the oom reaper by checking tsk->oom_reaper_list != NULL. This check is not sufficient because the tsk might be the head of the queue without any other tasks queued and then we would simply lockup looping on the same task. Fix the condition by checking for the head as well. Fixes: bb29902a ("oom, oom_reaper: protect oom_reaper_list using simpler way") Signed-off-by: NMichal Hocko <mhocko@suse.com> Acked-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Lucas Stach 提交于
Page isolation has not failed if the fin pfn extends beyond the end pfn and test_pages_isolated checks this correctly. Fix the tracepoint to report the same result as the actual check function. Signed-off-by: NLucas Stach <l.stach@pengutronix.de> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <js1304@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-