- 10 1月, 2009 1 次提交
-
-
由 Eric Piel 提交于
The sensor can be accessed via various buses. In particular, SPI, I²C and, on HP laptops, via a specific ACPI API (the only one currently supported). Separate this latest platform from the core of the sensor driver to allow support for the other bus type. The second, and more direct goal is actually to be able to merge this part with the hp-disk-leds driver, which has the same ACPI PNP number. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 1月, 2009 1 次提交
-
-
由 Ira Snyder 提交于
Add Linux support for the Linear Technology LTC4245 Multiple Supply Hot Swap controller I2C monitoring interface. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 13 11月, 2008 2 次提交
-
-
由 Darrick J. Wong 提交于
New driver to play with. As Jean mentioned a couple of years ago, this chip is a beast with odd combinations of 8 fans, 4 temperatures, and 13 voltage sensors. This driver has been tested on an IntelliStation Z30. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Machek 提交于
This adds a driver to the accelerometer sensor found in several HP laptops (under the commercial names of "HP Mobile Data Protection System 3D" and "HP 3D driveguard"). It tries to have more or less the same interfaces as the hdaps and other accelerometer drivers: in sysfs and as a joystick. This driver was first written by Yan Burman. Eric Piel has updated it and slimed it up (including the removal of an interface to access to the free-fall feature of the sensor because it is not reliable enough for now). Pavel Machek removed few more features and switched locking from semaphore to mutex. Several people have contributed to the database of the axes. [eric.piel@tremplin-utc.net: LIS3LV02D: Conform to the new ACPI API] Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NYan Burman <burman.yan@gmail.com> Signed-off-by: NPavel Machek <pavel@suse.cz> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 9月, 2008 1 次提交
-
-
由 Eric Miao 提交于
Driver based on corgi_ssp.c and sharpsl_pm.c, previously done by Richard Purdie and many others. Now changed to generic HWMON device and expose all the ADC input value through sysfs. Signed-off-by: NEric Miao <eric.miao@marvell.com> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 25 8月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This is a PIC16F747 based controller that monitors and consolidates the hardware access to various fan and temperature values reported by adr7462 and similar devices behind an I2C bus. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 8月, 2008 1 次提交
-
-
由 Marc Pignat 提交于
SPI driver for analog to digital converters national semiconductor ADC081S101, ADC124S501, ... Code for 8 channels by Tobias Himmer. This driver adds support for National Semiconductor ADC<bb><c>S<sss> chip family, where: * bb is the resolution in number of bits (8, 10, 12) * c is the number of channels (1, 2, 4, 8) * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS and 101 for 1 MSPS) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Cc: Tobias Himmer <tobias@himmer-online.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 8月, 2008 1 次提交
-
-
由 Sean MacLennan 提交于
Driver for the Analog Devices AD7414 temperature monitoring chip. Signed-off-by: NSean MacLennan <smaclennan@pikatech.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 25 5月, 2008 1 次提交
-
-
由 Darrick J. Wong 提交于
This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 2月, 2008 1 次提交
-
-
由 Darrick J. Wong 提交于
This driver reports voltage, temperature and fan sensor readings on an ADT7473 chip. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 2月, 2008 2 次提交
-
-
由 Steve Hardy 提交于
Signed-off-by: NSteve Hardy <steve@linuxrealtime.co.uk> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Kevin Lo 提交于
Signed-off-by: NKevin Lo <kevlo@kevlo.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 08 11月, 2007 1 次提交
-
-
由 Darrick J. Wong 提交于
New driver to read FB-DIMM temperature sensors on systems with the Intel 5000 series chipsets. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 11 10月, 2007 1 次提交
-
-
由 Hans de Goede 提交于
This patch adds a new merged driver for FSC sensor chips, it merges the fscher and fscpos drivers and adds support for the FSC Scylla, Heracles and Heimdall chips. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 10 10月, 2007 4 次提交
-
-
由 Darrick J. Wong 提交于
Add a driver to export IBM PowerExecutive power meter sensors. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Riku Voipio 提交于
Add support for Fintek F75375S/SP and F75373. Signed-off-by: NRiku Voipio <riku.voipio@movial.fi> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Darrick J. Wong 提交于
New driver to expose temperature and fan controls attached to Analog Devices ADT7470 hwmon chips. Signed-off-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Hans de Goede 提交于
This is the second version of a new driver for the hardware monitoring features of the Fintek F71882FG and F71883FG Super-I/O chips. This version has several small fixes for flaws discovered during the review of the first version. This version of the driver does not support the pwm part of these chips (yet). I'll first design a sysfs api for this and post that for discussion, and then implement pwm support as an incremental patch over this one. This driver supports all sensors of this chip, except for the vid inputs. The vid inputs are somewhat documented in the datasheet, but I know nothing about vid/vrm stuff. Help with this would be much appreciated. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Acked-by: NDarrick J. Wong <djwong@us.ibm.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 31 7月, 2007 1 次提交
-
-
由 Krzysztof Helt 提交于
This patch adds support for THMC50 and ADM1022 hardware monitoring chips. Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 20 7月, 2007 3 次提交
-
-
由 Hans-Jürgen Koch 提交于
This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: NHans J. Koch <hjk@linutronix.de> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Hans de Goede 提交于
This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Juerg Haefliger 提交于
Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 09 5月, 2007 1 次提交
-
-
由 Nicolas Boichat 提交于
This driver provides support for the Apple System Management Controller, which provides an accelerometer (Apple Sudden Motion Sensor), light sensors, temperature sensors, keyboard backlight control and fan control. Only Intel-based Apple's computers are supported (MacBook Pro, MacBook, MacMini). [bunk@stusta.de: make drivers/hwmon/applesmc.c:backlight_work stati] [khali@linux-fr.org: fix temperature attribute file names] Signed-off-by: NNicolas Boichat <nicolas@boichat.ch> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2007 3 次提交
-
-
由 Alessandro Zummo 提交于
A driver for the Analog Devices AD7416, AD7417 and AD7418 chips. Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Rudolf Marek 提交于
Add the support for the digital temperature sensor found in recent Intel Core CPUs. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans-Juergen Koch 提交于
This driver supports the Maxim MAX6650 and MAX6651 fan speed monitoring and control chips. Signed-off-by: NHans J. Koch <hjk@linutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Corentin Labbe 提交于
Signed-off-by: NCorentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 13 12月, 2006 3 次提交
-
-
由 Stelian Pop 提交于
This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: NStelian Pop <stelian@popies.net> Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: NRobert Love <rml@novell.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Rudolf Marek 提交于
Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 29 9月, 2006 2 次提交
-
-
由 Juerg Haefliger 提交于
hwmon: New driver for the VIA VT1211 This is a new driver for the VIA VT1211 Super-IO chip. It is a rewrite of the existing vt1211 driver (by Mark D. Studebaker and Lars Ekman) which has been around for a while but never made it into the main kernel tree. It is implemented as a platform driver and therefore requires lm_sensors 2.10.1 to function properly. Signed-off-by: NJuerg Haefliger <juergh@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Rudolf Marek 提交于
Add support for the temperature sensor(s) found in AMD K8 CPUs. Signed-off-by: NRudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 6月, 2006 4 次提交
-
-
由 Kaiwan N Billimoria 提交于
This driver implements support for the National Semiconductor LM70 temperature sensor. The LM70 temperature sensor chip supports a single temperature sensor. It communicates with a host processor (or microcontroller) via an SPI/Microwire Bus interface. Communication with the LM70 is simple: when the temperature is to be sensed, the driver accesses the LM70 using SPI communication: 16 SCLK cycles comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's complement digital temperature (sent via the SIO line), is available in the driver for interpretation. This driver makes use of the kernel's in-core SPI support. Signed-off-by: NKaiwan N Billimoria <kaiwan@designergraphix.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hans de Goede 提交于
New hardware monitoring driver for the Abit uGuru Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Charles Spirakis 提交于
Add support for the w83791d sensor chip. The w83791d hardware is somewhere between the w83781d and the w83792d and this driver code is derived from the code that supports those chips. Signed-off-by: NCharles Spirakis <bezaur@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Hartmut Rick 提交于
New driver (smsc47m192) which supports voltage and temperature measurement features of SMSC LPC47M192 and LPC47M997 chips. Signed-off-by: NHartmut Rick <linux@rick.claranet.de> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 2月, 2006 1 次提交
-
-
由 Jean Delvare 提交于
This is my f71805f hardware monitoring driver ported from lm_sensors to Linux 2.6. This new driver differs from the other hardware monitoring drivers in that it is implemented as a platform driver. This might not be optimal yet (we would probably need a generic infrastructure and bus type for Super-I/O logical devices) but it is certainly much better than the i2c-isa solution. Note that this driver requires lm_sensors CVS. I hope to get it released as 2.10.0 soon. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 1月, 2006 1 次提交
-
-
由 Roger Lucas 提交于
Port the vt8231 hardware monitoring driver from lm_sensors CVS to Linux 2.6. Signed-off-by: NRoger Lucas <roger@planbit.co.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 9月, 2005 1 次提交
-
-
由 Robert Love 提交于
Driver for the IBM Hard Drive Active Protection System (HDAPS), an accelerometer found in most modern ThinkPads. Signed-off-by: NRobert Love <rml@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 06 9月, 2005 1 次提交
-
-
由 Jean Delvare 提交于
The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-