- 18 2月, 2016 40 次提交
-
-
由 Iyappan Subramanian 提交于
Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NKhuong Dinh <kdinh@apm.com> Signed-off-by: NTanmay Inamdar <tinamdar@apm.com> Tested-by: NToan Le <toanle@apm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Shengju 提交于
Since function vlan_proc_rem_dev() will only return 0, it's better to return void instead of int. Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
By packing the structure we can remove a few holes as Jamal suggests. before: struct tc_cls_u32_knode { struct tcf_exts * exts; /* 0 8 */ u8 fshift; /* 8 1 */ /* XXX 3 bytes hole, try to pack */ u32 handle; /* 12 4 */ u32 val; /* 16 4 */ u32 mask; /* 20 4 */ u32 link_handle; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ struct tc_u32_sel * sel; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* sum members: 33, holes: 2, sum holes: 7 */ /* last cacheline: 40 bytes */ }; after: struct tc_cls_u32_knode { struct tcf_exts * exts; /* 0 8 */ struct tc_u32_sel * sel; /* 8 8 */ u32 handle; /* 16 4 */ u32 val; /* 20 4 */ u32 mask; /* 24 4 */ u32 link_handle; /* 28 4 */ u8 fshift; /* 32 1 */ /* size: 40, cachelines: 1, members: 7 */ /* padding: 7 */ /* last cacheline: 40 bytes */ }; Suggested-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
Fixes: 9d35cf06 ("net: ixgbe: add minimal parser details for ixgbe") Reported-by: NMark Rustad <mark.d.rustad@intel.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf06 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ben Hutchings says: ==================== Remove the inet_lro library The old inet_lro library has been deprecated ever since GRO was introduced, but there are still a few drivers using it. Convert them to GRO and remove it. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
There are no longer any in-tree drivers that use it. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
GRO is simpler to use than the old inet_lro library, and is compatible with forwarding and bridging configurations. Compile-tested only. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
GRO is simpler to use than the old inet_lro library, and is compatible with forwarding and bridging configurations. Compile-tested only. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 One Thousand Gnomes 提交于
The timeout is a long, we return it truncated if it is huge. Basically harmless as the only caller does a boolean check, but tidy it up anyway. (64bit build tested this time. Thank you 0day) Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuval Mintz 提交于
This patch moves the qed* driver into utilizing the 8.7.3.0 FW. This new FW is required for a lot of new SW features, including: - Vlan filtering offload - Encapsulation offload support - HW ingress aggregations As well as paving the way for the possibility of adding storage protocols in the future. V2: - Fix kbuild test robot error/warnings. Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Xin Long says: ==================== sctp: some cleanups for sctp There are some unused function and redundant rcu locks should be removed. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Since commit 8b570dc9 ("sctp: only drop the reference on the datamsg after sending a msg") used sctp_datamsg_put in sctp_sendmsg, instead of sctp_datamsg_free, this function has no use in sctp. So we will remove it. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
sctp_seq_dump_remote_addrs is only called by sctp_assocs_seq_show() and it has been protected by rcu_read_lock that is from rhashtable_walk_start(). So we will remove this one. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
__sctp_lookup_association() is only invoked by sctp_v4_err() and sctp_rcv(), both which run on the rx BH, and it has been protected by rcu_read_lock [see ip_local_deliver_finish() / ipv6_rcv()]. So we can move it to sctp_lookup_association, only let sctp_lookup_association use rcu_read_lock. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rosen, Rami 提交于
commit 3ed80a62 (cgroup: drop module support) made including module.h redundant in the net cgroup controllers, netclassid_cgroup.c and netprio_cgroup.c. This patch removes them. Signed-off-by: NRami Rosen <rami.rosen@intel.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sergei Shtylyov says: ==================== Kill useless *switch* defaults in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net-next.git' repo removing often used *default* cases doing nothing. [1/2] ravb: kill useless *switch* defaults [2/2] sh_eth: kill useless *switch* defaults ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver often has the *default* cases doing nothing in the *switch* statements with the integer expressions -- remove them. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The driver has the *default* case doing nothing in the *switch* statement with an integer expression -- remove it. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NSimon Horman <horms+renesas@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue由 David S. Miller 提交于
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-02-17 This series contains updates to i40e/i40evf only. Jesse cleans up a duplicate declaration in probe. Then fixes a bug where the driver was using a offset based off a DMA handle while mapping and unmapping using sync_single_range_for_[cpu|device], when it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Fixed an issue where sync_vsi_filter() was allocating memory in a way that could sleep (GFP_KERNEL) which was causing a problem when called by the team driver under rcu_read_lock(). Shannon adds a check to ensure we do not attempt to do TSO when skb->ip_summed is not set to CHECKSUM_PARTIAL. Kiran add functions related to port mirroring features such as add/delete mirror rule. Jacob assigns the i40e_pf structure directly instead of using a large memcpy, to avoid a sparse warning and lets the compiler optimize the copy since it know the size of the structure in advance. Anjali enables GENEVE capability for XL710/X710 devices with firmware API version higher than 1.4. Added flag for automatic rule eviction feature for X722, which is disabled by default. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2016-02-12 The following updates and fixes are included in this driver update series: - Disable VLAN filtering in promiscuous mode - Change from using napi_complete to napi_complete_done - Use __napi_schedule_irqoff when running in interrupt context - Verify ethtool speed setting is valid for the selected speedset - Enable PFC based on the pfc_en setting - Fix the mapping of priorities to traffic classes - Do traffic class setup when DCB nl callbacks are invoked - Check Rx queue fifos before stopping Rx queue DMA - Switch from disable_irq to masking interrupts for auto-negotiation This patch series is based on net-next. Changes from v1: - Removed #ifndef and #define of CRCPOLY_LE as part of the patch to disable VLAN filtering in promiscuous mode - Reworked changes to xgbe_setup_tc to resolve conflicts with commit 16e5cc64 (net: rework setup_tc ndo op to consume general tc operand) ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Currently the auto-negotiation interrupt handling disables the irq instead of masking off the interrupts. This was done because the phy library was originally used to read and write the PCS registers, which could not be performed in interrupt context. Now that the phy library is no longer used to read and write the PCS registers the interrupts can be masked off in the interrupt service routine eliminating the need to call disable_irq/enable_irq. This also requires changing the protection mutex to a spinlock. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Check to be sure that the Rx queue fifos are empty before stopping the Rx DMA channels. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Currently the netdev traffic class setup is only performed when invoked through the ndo_setup_tc interface. However, the same setup should be performed when the dcbnl interface (ieee_setets) is invoked. Rework the netdev traffic class setup to be invokable through either interface and also provide the priority to traffic class mapping if available. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The driver is checking the pfc_en field of the ieee_pfc structure to determine whether to associate a priority with a traffic class. This is incorrect since the pfc_en field is for determining if PFC is enabled for a traffic class. The association of priority to traffic class does not depend on whether the traffic class is enabled for PFC, so remove that check. Also, the mapping of priorities to traffic classes should be done when configuring the traffic classes and not the PFC support so move the priority to traffic class association from xgbe_config_dcb_pfc to xgbe_config_dcb_tc. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Currently the PFC flow control is enabled on all traffic classes if one or more traffic classes request it. The PFC enable setting of the traffic class should be used to determine whether to enable or disable flow control for the traffic class. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When using ethtool to set the speed for the device, verify that the specified speed is valid within the active speedset. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Change from calling __napi_schedule to __napi_schedule_irqoff when running in interrupt context or when called by netpoll with interrupts already disabled. The Tx timer function will continue to use __napi_schedule. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When the hardware is placed in promiscuous mode it will still perform VLAN filtering and therefore may not pass all packets to the driver. Disable all VLAN filtering when entering promiscuous mode and restore VLAN filtering upon exit from promiscuous mode. In order to avoid adding forward declarations, move the VLAN related functions earlier in the file. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhang Shengju 提交于
Use IFF_NO_QUEUE to indicate that a device can run without a qdisc. Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
This commit converts commit b499ffb0 ("i40e: Look up MAC address in Open Firmware or IDPROM") to use eth_platform_get_mac_address() added by commit c7f5d105 ("net: Add eth_platform_get_mac_address() helper.") Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
The X722 can support automatic rule eviction for automatically added flow director rules. Feature is (should be) disabled by default. Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai 提交于
This patch makes sure we check the GENEVE offload capable flag before we attempt offload. It also enables the Capability for XL710/X710 devices with FW API version higher than 1.4 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Bump driver versions to i40e-1.4.12 and i40evf-1.4.8 Change-ID: I0ad82668c4ded04250391fda396ce191a42ab754 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jacob Keller 提交于
Assign the i40e_pf structure directly instead of using a large memcpy, which avoids a sparse warning and lets the compiler optimize the copy since it knows the size of the structure in advance. Change-ID: I17604e23be2616521eb760290befcb767b52b3f7 Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Reviewed-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Driver already counted allocation errors, so print them as part of the ethtool -S output. Useful for debugging if your system is having trouble making memory available for the driver. Change-ID: I83839fa86e81e6d80f03b917c88dd3ef9a64dde0 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Delete the unused irq_dynamic_disable function. Change-ID: Ia46071066babd121c7c90f141b6210b00078de3f Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: NAnjali Singhai <anjali.singhai@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The PHY interrupt mask bits mask out the events we don't want, so we need to negate the bitmask of events we want. Change-ID: I273244da5a8d285b6abc84fd68a90f1e6fa0393e Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Kiran Patil 提交于
This patch implements necessary functions related to port mirroring features such as add/delete mirror rule, function to set promiscuous VLAN mode for VSI if mirror rule_type is "VLAN Mirroring". Change-ID: Iaf513fd5f188f99dcb977b48f99e73185dfddc40 Signed-off-by: NKiran Patil <kiran.patil@intel.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-