Callers of ccw_device_notify could not distinguish between a driver
who has no notifier registered and a driver who doesn't want to keep
a device after a certain event. Change this by adding proper return
codes.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Make the potentially long blocking wait_event's used by the cio
settle mechanism interruptible.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

To fetch a pending channel report word (crw) we use a kernel
thread which triggers stcrw and sleeps on a semaphore. The s390
machine check handler uses crw_handle_channel_report to handle
one crw if needed.

This patch replaces the semaphore with a waitqueue (to block the
kernel thread) and an atomic_t (to count the number of pending
requests).

By this we achieve the ability to force this thread to check for
a pending crw (independent on when it is triggered by the machine
check handler) and wait for this action to finish.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch introduces a proc file cio_settle. A write request to
this file is blocked until all queued cio actions are handled.

This will allow userspace to wait for pending work affecting
device availability after changing cio_ignore or the hardware
configuration.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We used to maintain 2 singlethreaded workqueues for synchronization
and to trigger work from interrupt context. Since our latest cio
changes we only use one of these workqueues. So get rid of the
unused workqueue, rename the remaining one to "cio_work_q" and move
its ownership to the channel subsystem driver.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

cu3088 layer for lcs and ctcm has been removed. Thus the reference
to cu3088 in this text is to be removed as well.
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Same as on x86 and sparc, besides the fact that enabling the option
will just emit compile time warnings instead of errors.
Keeps allyesconfig kernels compiling.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (48 commits)
  x86/PCI: Prevent mmconfig memory corruption
  ACPI: Use GPE reference counting to support shared GPEs
  x86/PCI: use host bridge _CRS info by default on 2008 and newer machines
  PCI: augment bus resource table with a list
  PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
  PCI: read bridge windows before filling in subtractive decode resources
  PCI: split up pci_read_bridge_bases()
  PCIe PME: use pci_pcie_cap()
  PCI PM: Run-time callbacks for PCI bus type
  PCIe PME: use pci_is_pcie()
  PCI / ACPI / PM: Platform support for PCI PME wake-up
  ACPI / ACPICA: Multiple system notify handlers per device
  ACPI / PM: Add more run-time wake-up fields
  ACPI: Use GPE reference counting to support shared GPEs
  PCI PM: Make it possible to force using INTx for PCIe PME signaling
  PCI PM: PCIe PME root port service driver
  PCI PM: Add function for checking PME status of devices
  PCI: mark is_pcie obsolete
  PCI: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges
  PCI: pciehp: second try to get big range for pcie devices
  ...

The five-second delay can be rather annoying, and makes the system
appear much less responsive when you connect a USB drive.

It's also not entirely clear that it is needed - the settling delay has
at least historically been an issue on some Apple iPods, for example,
and some devices have been reported to need even more than the old 5s
delay.

But before we penalize them all, let's see how bad it really is.  Some
of the reasons for long delays seem to be actual historical kernel bugs
that should probably never have been papered over with a delay in the
first place (there's a Ubuntu bug report for 2.6.20 about a NULL pointer
dereference unless 'delay_use' is 8 or more, for example).

It also looks like some distros have already shipped with delay_use=0,
so the five second default may well be totally historical.

In other words: "Let's see if anybody screams".
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (41 commits)
  of: remove undefined request_OF_resource & release_OF_resource
  of/sparc: Remove sparc-local declaration of allnodes and devtree_lock
  of: move definition of of_chosen into common code.
  of: remove unused extern reference to devtree_lock
  of: put default string compare and #a/s-cell values into common header
  of/flattree: Don't assume HAVE_LMB
  of: protect linux/of.h with CONFIG_OF
  proc_devtree: fix THIS_MODULE without module.h
  of: Remove old and misplaced function declarations
  of/flattree: Make the kernel accept ePAPR style phandle information
  of/flattree: endian-convert members of boot_param_header
  of: assume big-endian properties, adding conversions where necessary
  of: use __be32 for cell value accessors
  of/flattree: use OF_ROOT_NODE_{SIZE,ADDR}_CELLS DEFAULT for fdt parsing
  of/flattree: use callback to setup initrd from /chosen
  proc_devtree: include linux/of.h
  of: make set_node_proc_entry private to proc_devtree.c
  of: include linux/proc_fs.h
  of/flattree: merge early_init_dt_scan_memory() common code
  of: add 'of_' prefix to machine_is_compatible()
  ...

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (31 commits)
  spi: Correct SPI clock frequency setting in spi_mpc8xxx
  spi/spi_s3c64xx.c: Fix continuation line formats
  spi/dw_spi: Fix dw_spi_mmio to depend on HAVE_CLK
  spi/dw_spi: Allow dw_spi.c to be a module
  spi/dw_spi: mmio code style fixups
  Memory-mapped dw_spi driver
  spi/dw_spi: fix missing export of dw_spi_remove_host
  spi/dw_spi: conditional transfer mode changes
  spi/dw_spi: remove conditional from 'poll_transfer'.
  spi/dw_spi: fixed a spelling typo in a warning message.
  spi/dw_spi: add return value to empty mrst_spi_debugfs_init()
  spi/dw_spi: enable platform specific chipselect.
  spi/dw_spi: add a FIFO depth detection
  spi/dw_spi: fix __init/__devinit section mismatch
  spi: xilinx_spi: Fix up I/O routine wrapping bogosity.
  spi/spi_imx: add device information by switching pr_debug() to dev_dbg()
  spi: update MSIOF includes
  spi/dw_spi: refine the IRQ mode working flow
  spi/dw_spi: add a missed dw_spi_remove_host() in exit sequence
  spi/dw_spi: bug fix in wait_till_not_busy()
  ...

Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: Simplify LSMOD= handling
  kconfig: Add LSMOD=file to override the lsmod for localmodconfig
  kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl
  kconfig: Check for if conditions in Kconfig for localmodconfig
  kconfig: Create include/generated for localmodconfig

Merge branch 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig

* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: simplification of scripts/extract-ikconfig

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (41 commits)
  HID: usbhid: initialize interface pointers early enough
  HID: extend mask for BUTTON usage page
  HID: hid-ntrig: Single touch mode tap
  HID: hid-ntrig: multitouch cleanup and fix
  HID: n-trig: remove unnecessary tool switching
  HID: hid-ntrig add multi input quirk and clean up
  HID: usbhid: introduce timeout for stuck ctrl/out URBs
  HID: magicmouse: coding style and probe failure fixes
  HID: remove MODULE_VERSION from new drivers
  HID: fix up Kconfig entry for MagicMouse
  HID: add a device driver for the Apple Magic Mouse.
  HID: Export hid_register_report
  HID: Support for MosArt multitouch panel
  HID: add pressure support for the Stantum multitouch panel
  HID: fixed bug in single-touch emulation on the stantum panel
  HID: fix typo in error message
  HID: add mapping for "AL Network Chat" usage
  HID: use multi input quirk for TouchPack touchscreen
  HID: make full-fledged hid-bus drivers properly selectable
  HID: make Wacom modesetting failures non-fatal
  ...

Conflicts:
	drivers/hid/Kconfig

commit ff097ddd (x86/PCI: MMCONFIG: manage pci_mmcfg_region as a
list, not a table) introduced a nasty memory corruption when
pci_mmcfg_list is empty.

pci_mmcfg_check_end_bus_number() dereferences pci_mmcfg_list.prev even
when the list is empty. The following write hits some variable near to
pci_mmcfg_list.

Further down a similar problem exists, where cfg->list.next is
dereferenced unconditionally and a comparison with some variable near
to pci_mmcfg_list happens.

Add a check for the last element into the for_each_entry() loop and
remove all the other crappy logic which is just a leftover of the old
array based code which was replaced by the list conversion.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: stable@kernel.org
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (44 commits)
  Add MAINTAINERS entry for virtio_console
  virtio: console: Fill ports' entire in_vq with buffers
  virtio: console: Error out if we can't allocate buffers for control queue
  virtio: console: Add ability to remove module
  virtio: console: Ensure no memleaks in case of unused buffers
  virtio: console: show error message if hvc_alloc fails for console ports
  virtio: console: Add debugfs files for each port to expose debug info
  virtio: console: Add ability to hot-unplug ports
  virtio: console: Handle port hot-plug
  virtio: console: Remove cached data on port close
  virtio: console: Register with sysfs and create a 'name' attribute for ports
  virtio: console: Ensure only one process can have a port open at a time
  virtio: console: Add file operations to ports for open/read/write/poll
  virtio: console: Associate each port with a char device
  virtio: console: Prepare for writing to userspace buffers
  virtio: console: Add a new MULTIPORT feature, support for generic ports
  virtio: console: Introduce a send_buf function for a common path for sending data to host
  virtio: console: Introduce function to hand off data from host to readers
  virtio: console: Separate out find_vqs operation into a different function
  virtio: console: Separate out console init into a new function
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  netlabel: fix export of SELinux categories > 127

This fixes corrupted CIPSO packets when SELinux categories greater than 127
are used.  The bug occured on the second (and later) loops through the
while; the inner for loop through the ebitmap->maps array used the same
index as the NetLabel catmap->bitmap array, even though the NetLabel bitmap
is twice as long as the SELinux bitmap.
Signed-off-by: NJoshua Roys <joshua.roys@gtri.gatech.edu>
Acked-by: NPaul Moore <paul.moore@hp.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI

Mike Cui reported that his system with an NVIDIA MCP79 (aka MCP7A)
chipset stopped working with 2.6.32. The problem appears to be that
2.6.32 now enables the FPDMA auto-activate optimization in the ahci
driver. The drive works fine with this enabled on an Intel AHCI so
this appears to be a chipset bug.  Since MCP79 is a fairly recent
NVIDIA chipset and we don't have any info on whether any other NVIDIA
chipsets have this issue, disable FPDMA AA optimization on all NVIDIA
AHCI controllers for now.

Should address http://bugzilla.kernel.org/show_bug.cgi?id=14922Signed-off-by: NRobert Hancock <hancockrwd@gmail.com>
While-we-investigate-issue-this-patch-looks-good-to-me-by: NPrajakta Gudadhe <pgudadhe@nvidia.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org

To fix a bug and address the reviewers' comments regarding the ACPI
GPE refcounting patch, do the following additional changes:

o Remove the second argument of acpi_ev_enable_gpe(),
  'write_to_hardware', because it is not necessary any more.

o Add the "bad parameter" test against 'type' in
  acpi_enable_gpe() and acpi_disable_gpe().

o Make acpi_enable_gpe() only check 'status' for runtime GPEs if
  acpi_ev_enable_gpe() was actually called.

o Make acpi_disable_gpe() return 'status' returned by
  acpi_ev_disable_gpe() and fix a bug where ACPI_GPE_TYPE_WAKE
  and ACPI_GPE_TYPE_RUNTIME were exchanged by mistake.

o Add comments explaining why acpi_set_gpe() is used by the ACPI EC
  driver.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

If radix_tree_preload is failed in ima_inode_alloc, we don't need
radix_tree_preload_end because kernel is alread preempt enabled
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Signed-off-by: NMimi Zohar <zohar@us.ibm.com>
Signed-off-by: NJames Morris <jmorris@namei.org>

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Set PCI CLS early in boot.

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix broken sn2 build

Set the PCI CLS early in the boot process to prevent
device failures. In pcibios_set_master use the new
pci_cache_line_size instead of a hard-coded value.
Signed-off-by: NCarlos O'Donell <carlos@codesourcery.com>
Reviewed-by: NGrant Grundler <grundler@google.com>
Signed-off-by: NKyle McMartin <kyle@redhat.com>

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix out_le32() macro
  microblaze: Fix cache loop function for cache range

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Revert "block: improve queue_should_plug() by looking at IO depths"

Trailing semicolon causes compilation involving out_le32() to fail.
Signed-off-by: NSteven J. Magnani <steve@digidescorp.com>
Signed-off-by: NMichal Simek <monstr@monstr.eu>

I create wrong asm code but none test shows that this part of code is wrong.
I am not convinces that were good idea to create asm optimized macros
for caches. The reason is that there is not optimization with previous code
that's why make sense to add old code and do some benchmarking which
functions are faster.
Signed-off-by: NMichal Simek <monstr@monstr.eu>

I'm taking ownership of the virtio_console module; but I'll continue
feeding patches via Rusty.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Instead of allocating just one buffer for a port's in_vq, fill
the entire in_vq with buffers so the host need not stall while
an application consumes the data and makes the buffer available
again for the host.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

With MULTIPORT support, the control queue is an integral part of the
functioning of the device. If we can't get any buffers allocated, the
host won't be able to relay important information and the device may not
function as intended.

Ensure 'probe' doesn't succeed until the control queue has at least one
buffer allocated for its ivq.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add the ability to remove the virtio_console module.

This aids debugging.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If unused data exists in in_vq, ensure we flush that first and then
detach unused buffers, which will ensure all buffers from the in_vq are
removed.

Also ensure we free the buffers after detaching them.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

This is helpful in examining ports' state.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Remove port data; deregister from the hvc core if it's a console port.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

If the 'nr_ports' variable in the config space is updated to a higher
value, that means new ports have been hotplugged.

Introduce a new workqueue to handle such updates and create new ports.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>