The MSI restore function will become a function pointer in an
x86_msi_ops struct. It defaults to the implementation in the
io_apic.c and msi.c. We piggyback on the indirection mechanism
introduced by "x86: Introduce x86_msi_ops".

Cc: x86@kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This workaround holds a dma32 buffer at early boot to prevent later
bootmem allocations from stealing it in the case of large RAM configs.

Now that x86 is using memblock, and the nobootmem wrapper does top-down
allocation, it's no longer necessary, so remove it.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This patch expands functionality of CONFIG_DEBUG_RODATA to set main
(static) kernel data area as NX.

The following steps are taken to achieve this:

 1. Linker script is adjusted so .text always starts and ends on a page bound
 2. Linker script is adjusted so .rodata always start and end on a page boundary
 3. NX is set for all pages from _etext through _end in mark_rodata_ro.
 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c
 5. bios rom is set to x when pcibios is used.

The results of patch application may be observed in the diff of kernel page
table dumps:

pcibios:

 -- data_nx_pt_before.txt       2009-10-13 07:48:59.000000000 -0400
 ++ data_nx_pt_after.txt        2009-10-13 07:26:46.000000000 -0400
  0x00000000-0xc0000000           3G                           pmd
  ---[ Kernel Mapping ]---
 -0xc0000000-0xc0100000           1M     RW             GLB x  pte
 +0xc0000000-0xc00a0000         640K     RW             GLB NX pte
 +0xc00a0000-0xc0100000         384K     RW             GLB x  pte
 -0xc0100000-0xc03d7000        2908K     ro             GLB x  pte
 +0xc0100000-0xc0318000        2144K     ro             GLB x  pte
 +0xc0318000-0xc03d7000         764K     ro             GLB NX pte
 -0xc03d7000-0xc0600000        2212K     RW             GLB x  pte
 +0xc03d7000-0xc0600000        2212K     RW             GLB NX pte
  0xc0600000-0xf7a00000         884M     RW         PSE GLB NX pmd
  0xf7a00000-0xf7bfe000        2040K     RW             GLB NX pte
  0xf7bfe000-0xf7c00000           8K                           pte

No pcibios:

 -- data_nx_pt_before.txt       2009-10-13 07:48:59.000000000 -0400
 ++ data_nx_pt_after.txt        2009-10-13 07:26:46.000000000 -0400
  0x00000000-0xc0000000           3G                           pmd
  ---[ Kernel Mapping ]---
 -0xc0000000-0xc0100000           1M     RW             GLB x  pte
 +0xc0000000-0xc0100000           1M     RW             GLB NX pte
 -0xc0100000-0xc03d7000        2908K     ro             GLB x  pte
 +0xc0100000-0xc0318000        2144K     ro             GLB x  pte
 +0xc0318000-0xc03d7000         764K     ro             GLB NX pte
 -0xc03d7000-0xc0600000        2212K     RW             GLB x  pte
 +0xc03d7000-0xc0600000        2212K     RW             GLB NX pte
  0xc0600000-0xf7a00000         884M     RW         PSE GLB NX pmd
  0xf7a00000-0xf7bfe000        2040K     RW             GLB NX pte
  0xf7bfe000-0xf7c00000           8K                           pte

The patch has been originally developed for Linux 2.6.34-rc2 x86 by
Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>.

 -v1:  initial patch for 2.6.30
 -v2:  patch for 2.6.31-rc7
 -v3:  moved all code into arch/x86, adjusted credits
 -v4:  fixed ifdef, removed credits from CREDITS
 -v5:  fixed an address calculation bug in mark_nxdata_nx()
 -v6:  added acked-by and PT dump diff to commit log
 -v7:  minor adjustments for -tip
 -v8:  rework with the merge of "Set first MB as RW+NX"
Signed-off-by: NSiarhei Liakh <sliakh.lkml@gmail.com>
Signed-off-by: NXuxian Jiang <jiang@cs.ncsu.edu>
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: James Morris <jmorris@namei.org>
Cc: Andi Kleen <ak@muc.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dave Jones <davej@redhat.com>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4CE2F82E.60601@free.fr>
[ minor cleanliness edits ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce an x86 specific indirect mechanism to setup MSIs.
The MSI setup functions become function pointers in an x86_msi_ops
struct, that defaults to the implementation in io_apic.c and msi.c.

[v2: Use HAVE_DEFAULT_* knobs]
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Otherwise we'll duplicate definitions with the pci.h stubs.
Reported-by: NRandy Dunlap <randy.dunlap@oracle.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

All the architectures properly set NEED_DMA_MAP_STATE now so we can safely
add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h
inclusion in arch's asm/pci.h
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init,
pci_acpi_init, pci_visws_init and pci_legacy_init are called and each
implementation checks and eventually modifies the global variable
pcibios_scanned.

x86_init functions allow us to do this more elegant. The pci.init
function pointer is preset to pci_legacy_init. numaq, acpi and visws
can modify the pointer in their early setup functions. The functions
return 0 when they did the full initialization including bus scan. A
non zero return value indicates that pci_legacy_init needs to be
called either because the selected function failed or wants the
generic bus scan in pci_legacy_init to happen (e.g. visws).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NJacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

64bit NUMA already make enough space under 4G with new early_node_mem.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-16-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The early initialization of the pci bus to node mapping leaves all busses
with a node id of -1 if it lacks memory affinity.  Thus, cpumask_of_pcibus
must return all online cpus for such busses.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatthew Wilcox <willy@linux.intel.com>
Acked-by: NRussell King <linux@arm.linux.org.uk>
Acked-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NKyle McMartin <kyle@mcmartin.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAlex Chiang <achiang@hp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We can run a 32-bit kernel on boxes with an IOMMU, so we need
pci_unmap_addr() etc. to work -- without it, drivers will leak mappings.

To be honest, this whole thing looks like it's more pain than it's
worth; I'm half inclined to remove the no-op #else case altogether.

But this is the minimal fix, which just does the right thing if
CONFIG_DMAR is set.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org  [ for 2.6.30 ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We should not assign 64bit ranges to PCI devices that only take 32bit
prefetchable addresses.

Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge
and make the bus resource only have that bit set when all devices under
it support 64bit prefetchable memory.  Use that flag to allocate
resources from that range.
Reported-by: NYannick <yannick.roehlly@free.fr>
Reviewed-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: unification of pci-dma macros and pci_32.h removal

This patch unifies the definition of the pci_unmap_addr*, pci_unmap_len*
and DECLARE_PCI_UNMAP* macros. This makes sense because the pci_unmap
functions are no longer no-ops anymore when the kernel runs with
CONFIG_DMA_API_DEBUG. Without an iommu or DMA_API_DEBUG it is a no-op on 32 bit
because the dma mapping path returns a physical address and therefore the
dma-api implementation has no internal state which needs to be destroyed with
an unmap call.
This unification also simplifies the port of x86_64 iommu drivers to 32 bit x86
and let us get rid of pci_32.h.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>

Weak functions aren't all they're cracked up to be. They lead to
incorrect binaries with some toolchains, they require us to have empty
functions we otherwise wouldn't, and the unused code is not elided
(as of gcc 4.3.2 anyway).

So replace the weak MSI arch hooks with the #define foo foo idiom. We no
longer need empty versions of arch_setup/teardown_msi_irq().

This is less source (by 1 line!), and results in smaller binaries too:

   text	   data	    bss	    dec	    hex	filename
9354300	1693916	 678424	11726640 b2ef30	build/powerpc/vmlinux-before
9354052	1693852	 678424	11726328 b2edf8	build/powerpc/vmlinux-after

Also smaller on x86_64 and arm (iop13xx).
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Impact: reduce stack usage for large NR_CPUS

cpumask_of_pcibus() is the new version.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: New APIs

The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these
return a pointer to a struct cpumask.  Part of removing cpumasks from
the stack.

Also makes __pcibus_to_node take a const pointer.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

swiotlb on 32 bit will be used by Xen domain 0 support.
Signed-off-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change header guards named "ASM_X86__*" to "_ASM_X86_*" since:

a. the double underscore is ugly and pointless.
b. no leading underscore violates namespace constraints.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

x86, pci: introduce config option for pci reroute quirks (was: [PATCH 0/3] Boot IRQ quirks for Broadcom and AMD/ATI)

This is against linux-2.6-tip, branch pci-ioapic-boot-irq-quirks.

From: Stefan Assmann <sassmann@suse.de>
Subject: Introduce config option for pci reroute quirks

The config option X86_REROUTE_FOR_BROKEN_BOOT_IRQS is introduced to
enable (or disable) the redirection of the interrupt handler to the boot
interrupt line by default. Depending on the existence of interrupt
masking / threaded interrupt handling in the kernel (vanilla, rt, ...)
and the maturity of the rerouting patch, users can enable or disable the
redirection by default.

This means that the reroute quirk can be applied to any kernel without
changing it.

Interrupt sharing could be increased if this option is enabled. However this
option is vital for threaded interrupt handling, as done by the RT kernel.
It should simplify the consolidation with the RT kernel.

The option can be overridden by either pci=ioapicreroute or
pci=noioapicreroute.
Signed-off-by: NStefan Assmann <sassmann@suse.de>
Signed-off-by: NOlaf Dabrunz <od@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Cc: Ihno Krumreich <ihno@suse.de>
Cc: Sven Dietrich <sdietrich@suse.de>
Cc: Daniel Gollub <dgollub@suse.de>
Cc: Felix Foerster <ffoerster@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce pci=ioapicreroute kernel cmdline option to enable rerouting of boot
interrupts to the primary io-apic.
Signed-off-by: NStefan Assmann <sassmann@suse.de>
Signed-off-by: NOlaf Dabrunz <od@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Introduce pci=noioapicquirk kernel cmdline option to disable all boot
interrupt quirks
Signed-off-by: NStefan Assmann <sassmann@suse.de>
Signed-off-by: NOlaf Dabrunz <od@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Currently, on an amd k8 system with multi ht chains, the numa_node of
pci devices under /sys/devices/pci0000:80/* is always 0, even if that
chain is on node 1 or 2 or 3.

Workaround: pcibus_to_node(bus) is used when we want to get the node that
pci_device is on.

In struct device, we already have numa_node member, and we could use
dev_to_node()/set_dev_node() to get and set numa_node in the device.
set_dev_node is called in pci_device_add() with pcibus_to_node(bus),
and pcibus_to_node uses bus->sysdata for nodeid.

The problem is when pci_add_device is called, bus->sysdata is not assigned
correct nodeid yet. The result is that numa_node will always be 0.

pcibios_scan_root and pci_scan_root could take sysdata. So we need to get
mp_bus_to_node mapping before these two are called, and thus
get_mp_bus_to_node could get correct node for sysdata in root bus.

In scanning of the root bus, all child busses will take parent bus sysdata.
So all pci_device->dev.numa_node will be assigned correctly and automatically.

Later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we
could also could make other bus specific device get the correct numa_node
too.

This is an updated version of pci_sysdata and Jeff's pci_domain patch.

[ mingo@elte.hu: build fix ]
Signed-off-by: NYinghai Lu <yinghai.lu@sun.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Reorder defines and do white space / coding style cleanups
to get a readable diff.

Also convert the macros to inline functions. Move the pci
related inlines to pci.h
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move acpi/pci related declarations to the correct headers
and remove the duplicate.

Build fix from: Andrew Morton
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It was just duplicated code...
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>