Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 163
Star 36
Fork 7
cloud-kernel
cloud-kernel
切换分支/标签
  1. 17 5月, 2019 2 次提交
    • D
      PCI: hv: Add hv_pci_remove_slots() when we unload the driver · 76888d13
      由 Dexuan Cui 提交于 
      commit 15becc2b56c6eda3d9bf5ae993bafd5661c1fad1 upstream.

When we unload the pci-hyperv host controller driver, the host does not
send us a PCI_EJECT message.

In this case we also need to make sure the sysfs PCI slot directory is
removed, otherwise a command on a slot file eg:

"cat /sys/bus/pci/slots/2/address"

will trigger a

"BUG: unable to handle kernel paging request"

and, if we unload/reload the driver several times we would end up with
stale slot entries in PCI slot directories in /sys/bus/pci/slots/

root@localhost:~# ls -rtl  /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb  7 10:49 2
drwxr-xr-x 2 root root 0 Feb  7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb  7 10:51 2-2

Add the missing code to remove the PCI slot and fix the current
behaviour.

Fixes: a15f2c08 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: NDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: reformatted the log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NStephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      76888d13
    • D
      PCI: hv: Fix a memory leak in hv_eject_device_work() · a47e0054
      由 Dexuan Cui 提交于 
      commit 05f151a73ec2b23ffbff706e5203e729a995cdc2 upstream.

When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).

When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().

Add one put_pcichild() to fix the memory leak.

The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().

Fixes: 4daace0d ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: NDexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NStephen Hemminger <stephen@networkplumber.org>
Reviewed-by: NMichael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a47e0054
  3. 24 3月, 2019 1 次提交
  5. 13 2月, 2019 1 次提交
  7. 17 1月, 2019 3 次提交
  9. 17 12月, 2018 1 次提交
    • T
      PCI: imx6: Fix link training status detection in link up check · 2a031cab
      由 Trent Piepho 提交于 
      [ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]

This bug was introduced in the interaction for two commits on either
branch of the merge commit 562df5c8 ("Merge branch
'pci/host-designware' into next").

Commit 4d107d3b ("PCI: imx6: Move link up check into
imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll
the link status register directly, checking for link up and not
training, and made imx6_pcie_link_up() only check the link up bit (once,
not a polling loop).

While commit 886bc5ce ("PCI: designware: Add generic
dw_pcie_wait_for_link()"), replaced the loop in
imx6_pcie_wait_for_link() with a call to a new dwc core function, which
polled imx6_pcie_link_up(), which still checked both link up and not
training in a loop.

When these two commits were merged, the version of
imx6_pcie_wait_for_link() from 886bc5ce was kept, which eliminated
the link training check placed there by 4d107d3b. However, the
version of imx6_pcie_link_up() from 4d107d3b was kept, which
eliminated the link training check that had been there and was moved to
imx6_pcie_wait_for_link().

The result was the link training check got lost for the imx6 driver.

Eliminate imx6_pcie_link_up() so that the default handler,
dw_pcie_link_up(), is used instead. The default handler has the correct
code, which checks for link up and also that it still is not training,
fixing the regression.

Fixes: 562df5c8 ("Merge branch 'pci/host-designware' into next")
Signed-off-by: NTrent Piepho <tpiepho@impinj.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: NSasha Levin <sashal@kernel.org>
      2a031cab
  11. 06 12月, 2018 2 次提交
  13. 14 11月, 2018 4 次提交
  15. 06 10月, 2018 1 次提交
    • K
      treewide: Replace more open-coded allocation size multiplications · 329e0989
      由 Kees Cook 提交于 
      As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:

	kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
	kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
	devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)
Signed-off-by: NKees Cook <keescook@chromium.org>
      329e0989
  17. 02 10月, 2018 1 次提交
  19. 22 9月, 2018 1 次提交
  21. 21 9月, 2018 1 次提交
  23. 17 9月, 2018 1 次提交
    • S
      PCI: hv: support reporting serial number as slot information · a15f2c08
      由 Stephen Hemminger 提交于 
      The Hyper-V host API for PCI provides a unique "serial number" which
can be used as basis for sysfs PCI slot table. This can be useful
for cases where userspace wants to find the PCI device based on
serial number.

When an SR-IOV NIC is added, the host sends an attach message
with serial number. The kernel doesn't use the serial number, but
it is useful when doing the same thing in a userspace driver such
as the DPDK. By having /sys/bus/pci/slots/N it provides a direct
way to find the matching PCI device.

There maybe some cases where serial number is not unique such
as when using GPU's. But the PCI slot infrastructure will handle
that.

This has a side effect which may also be useful. The common udev
network device naming policy uses the slot information (rather
than PCI address).
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      a15f2c08
  25. 08 8月, 2018 6 次提交
  27. 06 8月, 2018 1 次提交
  29. 05 8月, 2018 1 次提交
    • N
      x86: Don't include linux/irq.h from asm/hardirq.h · 447ae316
      由 Nicolai Stange 提交于 
      The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().

Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like

  asm/smp.h
    asm/apic.h
      asm/hardirq.h
        linux/irq.h
          linux/topology.h
            linux/smp.h
              asm/smp.h

or

  linux/gfp.h
    linux/mmzone.h
      asm/mmzone.h
        asm/mmzone_64.h
          asm/smp.h
            asm/apic.h
              asm/hardirq.h
                linux/irq.h
                  linux/irqdesc.h
                    linux/kobject.h
                      linux/sysfs.h
                        linux/kernfs.h
                          linux/idr.h
                            linux/gfp.h

and others.

This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.

A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.

However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.

Remove the linux/irq.h #include from x86' asm/hardirq.h.

Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.

Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.
Signed-off-by: NNicolai Stange <nstange@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      447ae316
  31. 30 7月, 2018 3 次提交
    • L
      PCI: mobiveil: Add Kconfig/Makefile entries · 6f2c73c1
      由 Lorenzo Pieralisi 提交于 
      commit 9af6bcb1 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver") did not add the configuration and build infrastructure to
configure and build the mobiveil controller driver, so at present the
driver code is in the kernel but cannot be compiled.

Add the mobiveil controller driver Kconfig/Makefile infrastructure.

Fixes: 9af6bcb1 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
      6f2c73c1
    • L
      PCI: mobiveil: Add missing ../pci.h include · d3743012
      由 Lorenzo Pieralisi 提交于 
      PCI mobiveil host controller driver currently fails to compile
with the following error:

drivers/pci/controller/pcie-mobiveil.c: In function
'mobiveil_pcie_probe':
drivers/pci/controller/pcie-mobiveil.c:788:8: error: implicit
declaration of function 'devm_of_pci_get_host_bridge_resources'; did you
mean 'pci_get_host_bridge_device'?
[-Werror=implicit-function-declaration]
  ret = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff,
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        pci_get_host_bridge_device

Add the missing include file to pull in the required function declaration.

Fixes: 9af6bcb1 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
      d3743012
    • L
      PCI: mobiveil: Fix struct mobiveil_pcie.pcie_reg_base address type · af3f606e
      由 Lorenzo Pieralisi 提交于 
      The field pcie_reg_base in struct mobiveil_pcie represents a physical
address so it should be of phys_addr_t type rather than void __iomem*;
this results in the following compilation  warnings:

drivers/pci/controller/pcie-mobiveil.c: In function
'mobiveil_pcie_parse_dt':
drivers/pci/controller/pcie-mobiveil.c:326:22: warning: assignment makes
pointer from integer without a cast [-Wint-conversion]
  pcie->pcie_reg_base = res->start;
                      ^
drivers/pci/controller/pcie-mobiveil.c: In function
'mobiveil_pcie_enable_msi':
drivers/pci/controller/pcie-mobiveil.c:485:25: warning: initialization
makes integer from pointer without a cast [-Wint-conversion]
  phys_addr_t msg_addr = pcie->pcie_reg_base;
                         ^~~~
drivers/pci/controller/pcie-mobiveil.c: In function
'mobiveil_compose_msi_msg':
drivers/pci/controller/pcie-mobiveil.c:640:21: warning: initialization
makes integer from pointer without a cast [-Wint-conversion]
  phys_addr_t addr = pcie->pcie_reg_base + (data->hwirq * sizeof(int));

Fix the type and with it the compilation warnings.

Fixes: 9af6bcb1 ("PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP
driver")
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Subrahmanya Lingappa <l.subrahmanya@mobiveil.co.in>
      af3f606e
  33. 28 7月, 2018 1 次提交
  35. 26 7月, 2018 1 次提交
  37. 19 7月, 2018 8 次提交