- 12 7月, 2013 24 次提交
-
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Instead of using legacy suspend/resume methods, using newer dev_pm_ops structure allows better control over power management. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
dev_err()/dev_info() are more preferred than pr_err()/pr_info(). Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_gpio_request_one() to make cleanup paths simpler. Also, GPIOF_DIR_OUT | GPIOF_INIT_LOW is replaced with GPIOF_OUT_INIT_LOW. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_gpio_request_one() to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Sachin Kamat 提交于
'dw_wdt_write' is used only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_clk_get() to make cleanup paths more simple. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_kzalloc() to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_ioremap_nocache() functions to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_ioremap() to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_ioremap_nocache() to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Acked-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 Jingoo Han 提交于
Use devm_*() functions to make cleanup paths simpler. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
- 11 7月, 2013 16 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit d2aae847. It is completely and utterly broken. Module install should not build any files, and adding broken dependencies to "help" it build files is complete and utter sh*t. The kernel should not be built by root, and "make install" and "make module_install" (that for obvious reasons need to be run as root) absolutely must not build any files. They should only ever copy the already-built files over. So having dependencies for the install targets is wrong, wrong, wrong. If you try to install a kernel without building it first, you *should* get errors. The build system shouldn't try to help root build the files. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull more KVM changes from Gleb Natapov: "A fix for a bug that prevents some guests from working on old Intel CPUs and a patch that integrates ARM64 KVM, merged via ARM64 tree, into Kconfig." * tag 'kvm-3.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: mark unusable segment as nonpresent arm64: KVM: Kconfig integration
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull Sparc bugfixes from David Miller: "Four bug fixes: 1) Enable snoop tags properly on Sparc32/LEON, from Andreas Larsson 2) strcpy() length check fix from Chen Gang. 3) Forgotten unregister_netdev() in sunvnet driver, from Dave Kleikamp. 4) Fix broken assembler offsets used in vm_area_struct accesses on sparc32, from Olivier DANET." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: [PATCH] sparc32: vm_area_struct access for old Sun SPARCs. sunvnet: vnet_port_remove must call unregister_netdev sparc32, leon: Require separate snoop tags set to regard snooping to be enabled arch: sparc: kernel: check the memory length before use strcpy().
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
Pull IDE updates from David Miller: "Just a few small things: 1) module_platform_driver_probe() conversions from Jingoo Han. 2) module_pci_driver() conversion from Libo Chen. 3) PIO size calculation fix from Steven J Hill" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: Fix IDE PIO size calculation drivers/ide/delkin_cb: Convert to module_pci_driver ide: gayle: use module_platform_driver_probe() ide: tx4939ide: use module_platform_driver_probe() ide: tx4938ide: use module_platform_driver_probe()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull printk locking fix from Thomas Gleixner: "A single lock ordering fix in the printk code" * 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: printk: Fix rq->lock vs logbuf_lock unlock lock inversion
-
由 Linus Torvalds 提交于
Merge more patches from Andrew Morton: "The rest of MM" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: remove free_area_cache zswap: add documentation zswap: add to mm/ zbud: add to mm/
-
由 Michel Lespinasse 提交于
Since all architectures have been converted to use vm_unmapped_area(), there is no remaining use for the free_area_cache. Signed-off-by: NMichel Lespinasse <walken@google.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
Add the documentation file for the zswap functionality Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
zswap is a thin backend for frontswap that takes pages that are in the process of being swapped out and attempts to compress them and store them in a RAM-based memory pool. This can result in a significant I/O reduction on the swap device and, in the case where decompressing from RAM is faster than reading from the swap device, can also improve workload performance. It also has support for evicting swap pages that are currently compressed in zswap to the swap device on an LRU(ish) basis. This functionality makes zswap a true cache in that, once the cache is full, the oldest pages can be moved out of zswap to the swap device so newer pages can be compressed and stored in zswap. This patch adds the zswap driver to mm/ Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Seth Jennings 提交于
zbud is an special purpose allocator for storing compressed pages. It is designed to store up to two compressed pages per physical page. While this design limits storage density, it has simple and deterministic reclaim properties that make it preferable to a higher density approach when reclaim will be used. zbud works by storing compressed pages, or "zpages", together in pairs in a single memory page called a "zbud page". The first buddy is "left justifed" at the beginning of the zbud page, and the last buddy is "right justified" at the end of the zbud page. The benefit is that if either buddy is freed, the freed buddy space, coalesced with whatever slack space that existed between the buddies, results in the largest possible free region within the zbud page. zbud also provides an attractive lower bound on density. The ratio of zpages to zbud pages can not be less than 1. This ensures that zbud can never "do harm" by using more pages to store zpages than the uncompressed zpages would have used on their own. This implementation is a rewrite of the zbud allocator internally used by zcache in the driver/staging tree. The rewrite was necessary to remove some of the zcache specific elements that were ingrained throughout and provide a generic allocation interface that can later be used by zsmalloc and others. This patch adds zbud to mm/ for later use by zswap. Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: NRik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull coccinelle updates from Michal Marek: "The misc branch is reserved for Coccinelle this time: - 'report' is the default mode - MAINTAINERS update for Coccinelle - documentation udate - use new option format for spatch(1) - J=<n> variable to mimic make -j for coccicheck - check for missing pci_free_consistent() calls There are some patches for rpm-pkg and deb-pkg waiting for the 3.12-rc1 merge window" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Coccinelle: Update information about the minimal version required Coccinelle: Update the options used to the new option scheme scripts: Coccinelle script for pci_free_consistent() Coccinelle: Update the documentation Coccinelle: Update section of MAINTAINERS coccicheck: span checks across CPUs scripts/coccinelle: check for field address argument to kfree Coccinelle: Update the Coccinelle section of MAINTAINERS Coccinelle: Make 'report' the default mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kconfig updates from Michal Marek: - dependency solver fix for make defconfig - randconfig fixes, one of which had to be reverted again - more user-friendly sorting of search results - hex and range keywords support longs - fix for [mn]conf not to rely on particular behavior of the LINES and COLS variables - cleanup of magic constants in kconfig/lxdialog - [mn]conf formatting fixes - fix for scripts/config's help text in out-of-tree usage (under a different name) * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: allow "hex" and "range" to support longs Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG" kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG kconfig: loop as long as we changed some symbols in randconfig kconfig/[mn]conf: make it explicit in the search box that a regexp is possible kconfig: sort found symbols by relevance kconfig/conf: print the seed used to initialise the RNG for randconfig kconfig/conf: accept a base-16 seed for randconfig kconfig/conf: fix randconfig setting multiple symbols in a choice scripts/config: replace hard-coded script name by a dynamic value mconf/nconf: mark empty menus/menuconfigs different from non-empty ones nconf: use function calls instead of ncurses' variables LINES and COLS mconf: use function calls instead of ncurses' variables LINES and COLS kconfig/lxdialog: handle newline characters in print_autowrap() kconfig/lxdialog: Use new mininimum resize definitions in conf_choice() kconfig/lxdialog: Add definitions for mininimum (re)size values kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild updates from Michal Marek: - fix for make headers_install argv explosion with too long path - scripts/setlocalversion does not call git update-index needlessly - fix for the src.rpm produced by make rpm-pkg. The new make image_name can be useful also for other packaging tools. - scripts/mod/devicetable-offsets.o is not rebuilt during each make run - make modules_install dependency fix - scripts/sortextable portability fix - fix for kbuild to generate the output directory for all object files in subdirs. - a couple of minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: create directory for dir/file.o tools/include: use stdint types for user-space byteshift headers Makefile: Fix install error with make -j option Fix a build warning in scripts/mod/file2alias.c improve modalias building scripts/mod: Spelling s/DEVICEVTABLE/DEVICETABLE/ kbuild: fix error when building from src rpm scripts/setlocalversion on write-protected source tree Makefile.lib: align DTB quiet_cmd kbuild: fix make headers_install when path is too long
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two small fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix interrupt handler timing harness perf/x86/amd: Do not print an error when the device is not present
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module updates from Rusty Russell: "Nothing interesting. Except the most embarrassing bugfix ever. But let's ignore that" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: cleanup call chain. module: do percpu allocation after uniqueness check. No, really! modules: don't fail to load on unknown parameters. ABI: Clarify when /sys/module/MODULENAME is created There is no /sys/parameters module: don't modify argument of module_kallsyms_lookup_name()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio updates from Rusty Russell: "No real surprises" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: MAINTAINERS: add tools/virtio/ under virtio tools/virtio: move module license stub to module.h virtio: include asm/barrier explicitly virtio: VIRTIO_F_ANY_LAYOUT feature lguest: fix example launcher compilation for broken glibc headers. virtio-net: fix the race between channels setting and refill tools/lguest: real barriers. tools/lguest: fix missing rmb(). virtio_balloon: leak_balloon(): only tell host if we got pages deflated virtio-pci: fix leaks of msix_affinity_masks Fix comment typo "CONFIG_PAE"
-