This patch changes the output for gfp_flags from being a simple hex value
to the actual names.

  gfp_flags=GFP_ATOMIC  instead of gfp_flags=00000020

And even

  gfp_flags=GFP_KERNEL instead of gfp_flags=000000d0

(Thanks to Frederic Weisbecker for pointing out that the first version
 had a bad order of GFP masks)

[ Impact: more human readable output from tracer ]
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>

Impact: clean up

Create a sub directory in include/trace called events to keep the
trace point headers in their own separate directory. Only headers that
declare trace points should be defined in this directory.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch lowers the number of places a developer must modify to add
new tracepoints. The current method to add a new tracepoint
into an existing system is to write the trace point macro in the
trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or
DECLARE_TRACE, then they must add the same named item into the C file
with the macro DEFINE_TRACE(name) and then add the trace point.

This change cuts out the needing to add the DEFINE_TRACE(name).
Every file that uses the tracepoint must still include the trace/<type>.h
file, but the one C file must also add a define before the including
of that file.

 #define CREATE_TRACE_POINTS
 #include <trace/mytrace.h>

This will cause the trace/mytrace.h file to also produce the C code
necessary to implement the trace point.

Note, if more than one trace/<type>.h is used to create the C code
it is best to list them all together.

 #define CREATE_TRACE_POINTS
 #include <trace/foo.h>
 #include <trace/bar.h>
 #include <trace/fido.h>

Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with
the cleaner solution of the define above the includes over my first
design to have the C code include a "special" header.

This patch converts sched, irq and lockdep and skb to use this new
method.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Impact: clean up

Neil Horman (et. al.) criticized the way the trace events were broken up
into two files. The reason for that was that ftrace needed to separate out
the declarations from where the #include <linux/tracepoint.h> was used.
It then dawned on me that the tracepoint.h header only needs to define the
TRACE_EVENT macro if it is not already defined.

The solution is simply to test if TRACE_EVENT is defined, and if it is not
then the linux/tracepoint.h header can define it. This change consolidates
all the <traces>.h and <traces>_event_types.h into the <traces>.h file.
Reported-by: NNeil Horman <nhorman@tuxdriver.com>
Reported-by: NTheodore Tso <tytso@mit.edu>
Reported-by: NJiaying Zhang <jiayingz@google.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

TRACE_EVENT is a more generic way to define tracepoints.
Doing so adds these new capabilities to this tracepoint:

  - zero-copy and per-cpu splice() tracing
  - binary tracing without printf overhead
  - structured logging records exposed under /debug/tracing/events
  - trace events embedded in function tracer output and other plugins
  - user-defined, per tracepoint filter expressions
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49DEE6DA.80600@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: refactor code for future changes

Current kmemtrace.h is used both as header file of kmemtrace and kmem's
tracepoints definition.

Tracepoints' definition file may be used by other code, and should only have
definition of tracepoint.

We can separate include/trace/kmemtrace.h into 2 files:

  include/linux/kmemtrace.h: header file for kmemtrace
  include/trace/kmem.h:      definition of kmem tracepoints
Signed-off-by: NZhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <49DEE68A.5040902@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

kmemtrace now uses tracepoints instead of markers. We no longer need to
use format specifiers to pass arguments.
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
[ folded: Use the new TP_PROTO and TP_ARGS to fix the build.     ]
[ folded: fix build when CONFIG_KMEMTRACE is disabled.           ]
[ folded: define tracepoints when CONFIG_TRACEPOINTS is enabled. ]
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
LKML-Reference: <ae61c0f37156db8ec8dc0d5778018edde60a92e3.1237813499.git.eduard.munteanu@linux360.ro>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new tracer plugin

This patch adapts kmemtrace raw events tracing to the unified tracing API.

To enable and use this tracer, just do the following:

 echo kmemtrace > /debugfs/tracing/current_tracer
 cat /debugfs/tracing/trace

You will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

type_id 1 call_site 18446744071565527833 ptr 18446612134395152256
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164672 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345164912 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 0 call_site 18446744071565636711 ptr 18446612134345165152 bytes_req 240 bytes_alloc 240 gfp_flags 208 node -1
type_id 0 call_site 18446744071566144042 ptr 18446612134346191680 bytes_req 1304 bytes_alloc 1312 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584
type_id 0 call_site 18446744071565585597 ptr 18446612134405955584 bytes_req 4096 bytes_alloc 4096 gfp_flags 208 node -1
type_id 1 call_site 18446744071565585534 ptr 18446612134405955584

That was to stay backward compatible with the format output produced in
inux/tracepoint.h.

This is the default ouput, but note that I tried something else.

If you change an option:

echo kmem_minimalistic > /debugfs/trace_options

and then cat /debugfs/trace, you will have the following output:

 # tracer: kmemtrace
 #
 #
 # ALLOC  TYPE  REQ   GIVEN  FLAGS           POINTER         NODE    CALLER
 # FREE   |      |     |       |              |   |            |        |
 # |

   -      C                            0xffff88007c088780          file_free_rcu
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc780     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc870     -1   d_alloc
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   +      K    240    240   000000d0   0xffff8800790dc960     -1   d_alloc
   +      K   1304   1312   000000d0   0xffff8800791d7340     -1   reiserfs_alloc_inode
   -      C                            0xffff88007cad6000          putname
   +      K   4096   4096   000000d0   0xffff88007cad6000     -1   getname
   -      C                            0xffff88007cad6000          putname
   +      K    992   1000   000000d0   0xffff880079045b58     -1   alloc_inode
   +      K    768   1024   000080d0   0xffff88007c096400     -1   alloc_pipe_info
   +      K    240    240   000000d0   0xffff8800790dca50     -1   d_alloc
   +      K    272    320   000080d0   0xffff88007c088780     -1   get_empty_filp
   +      K    272    320   000080d0   0xffff88007c088000     -1   get_empty_filp

Yeah I shall confess kmem_minimalistic should be: kmem_alternative.

Whatever, I find it more readable but this a personal opinion of course.
We can drop it if you want.

On the ALLOC/FREE column, + means an allocation and - a free.

On the type column, you have K = kmalloc, C = cache, P = page

I would like the flags to be GFP_* strings but that would not be easy to not
break the column with strings....

About the node...it seems to always be -1. I don't know why but that shouldn't
be difficult to find.

I moved linux/tracepoint.h to trace/tracepoint.h as well. I think that would
be more easy to find the tracer headers if they are all in their common
directory.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix the problem "kmemtrace: fix printk format warnings" attempted to fix,
but resulted in marker-probe format mismatch warnings. Instead of carrying
size_t into probes, we get rid of it by casting to unsigned long, just as
we did with gfp_t.

This way, we don't need to change marker format strings and we don't have
to rely on other format specifiers like "%zu", making for consistent use
of more generic data types (since there are no format specifiers for
gfp_t, for example).
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>

kmemtrace provides tracing for slab allocator functions, such as kmalloc,
kfree, kmem_cache_alloc, kmem_cache_free etc.. Collected data is then fed
to the userspace application in order to analyse allocation hotspots,
internal fragmentation and so on, making it possible to see how well an
allocator performs, as well as debug and profile kernel code.
Signed-off-by: NEduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>