- 02 11月, 2017 3 次提交
-
-
由 Jiri Pirko 提交于
Since the only user, mlx5 driver does the check in mlx5e_setup_tc_block_cb, no need to check here. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
This restores the original behaviour before the block callbacks were introduced. Allow the drivers to do binding of block always, no matter if the NETIF_F_HW_TC feature is on or off. Move the check to the block callback which is called for rule insertion. Reported-by: NAlexander Duyck <alexander.duyck@gmail.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Currently the bridge device doesn't generate any notifications upon vlan modifications on itself because it doesn't use the generic bridge notifications. With the recent changes we know if anything was modified in the vlan config thus we can generate a notification when necessary for the bridge device so add support to br_ifinfo_notify() similar to how other combined functions are done - if port is present it takes precedence, otherwise notify about the bridge. I've explicitly marked the locations where the notification should be always for the port by setting bridge to NULL. I've also taken the liberty to rearrange each modified function's local variables in reverse xmas tree as well. Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2017 31 次提交
-
-
由 Egil Hjelmeland 提交于
The chip flood broadcast and unknown multicast frames. On receive set skb->offload_fwd_mark to prevent the SW from flooding to the same ports. One exception: Because the ALR is set up to forward STP BPDUs only to CPU, the SW bridge should flood STP BPDUs if local STP is not enabled. This is archived by not setting skb->offload_fwd_mark on STP BPDUs. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Egil Hjelmeland 提交于
STP BPDUs arriving on user ports must sent to CPU port only, for processing by the SW bridge. Add an ALR entry with STP state override to fix that. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Egil Hjelmeland 提交于
lan9303_xmit_use_arl() introduced in previous patch set is wrong. The chip flood broadcast and unknown multicast frames. The effect is that broadcasts and multicasts are duplicated on egress. It is not possible to configure the chip to direct unknown multicasts to CPU port only. This means that only unicast frames can be transmitted using ALR lookup. Signed-off-by: NEgil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
David reported breakages of VRF scenarios due to the commit 6e617de8 ("net: avoid a full fib lookup when rp_filter is disabled."): the local addresses based test is too strict when VRFs are in place. With this change we fall-back to a full lookup when custom fib rules are in place; so that we address the VRF use case and possibly other similar issues in non trivial setups. v1 -> v2: - fix build breakage when CONFIG_IP_MULTIPLE_TABLES is not defined, reported by the kbuild test robot Reported-by: NDavid Ahern <dsahern@gmail.com> Fixes: 6e617de8 ("net: avoid a full fib lookup when rp_filter is disabled.") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix to returnerror code -ENOMEM from the sctp_make_strreset_addstrm() error handling case instead of 0. 'retval' can be overwritten to 0 after call sctp_stream_alloc_out(). Fixes: e090abd0 ("sctp: factor out stream->out allocation") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Based on SNMP values provided by Roman, Yuchung made the observation that some crashes in tcp_sacktag_walk() might be caused by MTU probing. Looking at tcp_mtu_probe(), I found that when a new skb was placed in front of the write queue, we were not updating tcp highest sack. If one skb is freed because all its content was copied to the new skb (for MTU probing), then tp->highest_sack could point to a now freed skb. Bad things would then happen, including infinite loops. This patch renames tcp_highest_sack_combine() and uses it from tcp_mtu_probe() to fix the bug. Note that I also removed one test against tp->sacked_out, since we want to replace tp->highest_sack regardless of whatever condition, since keeping a stale pointer to freed skb is a recipe for disaster. Fixes: a47e5a98 ("[TCP]: Convert highest_sack to sk_buff to allow direct access") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com> Reported-by: NRoman Gushchin <guro@fb.com> Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name> Acked-by: NAlexei Starovoitov <ast@kernel.org> Acked-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
In the (unlikely) event fixup_permanent_addr() returns a failure, addrconf_permanent_addr() calls ipv6_del_addr() without the mandatory call to in6_ifa_hold(), leading to a refcount error, spotted by syzkaller : WARNING: CPU: 1 PID: 3142 at lib/refcount.c:227 refcount_dec+0x4c/0x50 lib/refcount.c:227 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3142 Comm: ip Not tainted 4.14.0-rc4-next-20171009+ #33 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x41c kernel/panic.c:181 __warn+0x1c4/0x1e0 kernel/panic.c:544 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:refcount_dec+0x4c/0x50 lib/refcount.c:227 RSP: 0018:ffff8801ca49e680 EFLAGS: 00010286 RAX: 000000000000002c RBX: ffff8801d07cfcdc RCX: 0000000000000000 RDX: 000000000000002c RSI: 1ffff10039493c90 RDI: ffffed0039493cc4 RBP: ffff8801ca49e688 R08: ffff8801ca49dd70 R09: 0000000000000000 R10: ffff8801ca49df58 R11: 0000000000000000 R12: 1ffff10039493cd9 R13: ffff8801ca49e6e8 R14: ffff8801ca49e7e8 R15: ffff8801d07cfcdc __in6_ifa_put include/net/addrconf.h:369 [inline] ipv6_del_addr+0x42b/0xb60 net/ipv6/addrconf.c:1208 addrconf_permanent_addr net/ipv6/addrconf.c:3327 [inline] addrconf_notify+0x1c66/0x2190 net/ipv6/addrconf.c:3393 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x32/0x60 net/core/dev.c:1697 call_netdevice_notifiers net/core/dev.c:1715 [inline] __dev_notify_flags+0x15d/0x430 net/core/dev.c:6843 dev_change_flags+0xf5/0x140 net/core/dev.c:6879 do_setlink+0xa1b/0x38e0 net/core/rtnetlink.c:2113 rtnl_newlink+0xf0d/0x1a40 net/core/rtnetlink.c:2661 rtnetlink_rcv_msg+0x733/0x1090 net/core/rtnetlink.c:4301 netlink_rcv_skb+0x216/0x440 net/netlink/af_netlink.c:2408 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4313 netlink_unicast_kernel net/netlink/af_netlink.c:1273 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1299 netlink_sendmsg+0xa4a/0xe70 net/netlink/af_netlink.c:1862 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x75b/0x8a0 net/socket.c:2049 __sys_sendmsg+0xe5/0x210 net/socket.c:2083 SYSC_sendmsg net/socket.c:2094 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2090 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7fa9174d3320 RSP: 002b:00007ffe302ae9e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffe302b2ae0 RCX: 00007fa9174d3320 RDX: 0000000000000000 RSI: 00007ffe302aea20 RDI: 0000000000000016 RBP: 0000000000000082 R08: 0000000000000000 R09: 000000000000000f R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffe302b32a0 R13: 0000000000000000 R14: 00007ffe302b2ab8 R15: 00007ffe302b32b8 Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vishwanath Pai 提交于
This patch updates the error messages displayed in kernel log to include hwaddress of the source machine that caused ipv6 duplicate address detection failures. Examples: a) When we receive a NA packet from another machine advertising our address: ICMPv6: NA: 34:ab:cd:56:11:e8 advertised our address 2001:db8:: on eth0! b) When we detect DAD failure during address assignment to an interface: IPv6: eth0: IPv6 duplicate address 2001:db8:: used by 34:ab:cd:56:11:e8 detected! v2: Changed %pI6 to %pI6c in ndisc_recv_na() Chaged the v6 address in the commit message to 2001:db8:: Suggested-by: NIgor Lubashev <ilubashe@akamai.com> Signed-off-by: NVishwanath Pai <vpai@akamai.com> Acked-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Code refactoring in order to make the code easier to read and maintain. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kees Cook 提交于
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: tipc-discussion@lists.sourceforge.net Signed-off-by: NKees Cook <keescook@chromium.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Using SIT tunnels with VRFs works fine if the underlay device is in a VRF and the link parameter is set to the VRF device. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev myvrf Update the device check to allow the link to be the enslaved device as well. e.g., ip tunnel add jtun mode sit remote <addr> local <addr> dev eth4 where eth4 is enslaved to myvrf. Reported-by: NJeff Barnhill <0xeffeff@gmail.com> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
Add an entry for IFLA_BRPORT_NEIGH_SUPPRESS to bridge port policies. Fixes: 821f1b21 ("bridge: add new BR_NEIGH_SUPPRESS port flag to suppress arp and nd flood") Signed-off-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yotam Gigi 提交于
For the time being I will be available in my private mail. Update both the MAINTAINERS file and the individual modules MODULE_AUTHOR directive with the new address. Signed-off-by: NYotam Gigi <yotam.gi@gmail.com> Signed-off-by: NYuval Mintz <yuvalm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
Make use of the swap macro and remove unnecessary variable tmp. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Unlike ipip and gre, ip_vti never uses err_count in vti4_err, so no need to check err_count in vti_xmit, it's value always 0. Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add extack to fib_notifier_info and plumb through stack to call_fib_rule_notifiers, call_fib_entry_notifiers and call_fib6_entry_notifiers. This allows notifer handlers to return messages to user. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
The NLMSGERR API already carries data (eg, a cookie) on the success path. Allow a message string to be returned as well. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Now that slave dsa_port always have their name set, there is no need to pass it to dsa_slave_create() anymore. Remove this argument. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Get the optional "label" property and assign a default one directly at parse time instead of doing it when creating the slave. For legacy, simply assign the port name stored in cd->port_names. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Fetching the master device can be done directly when a port is parsed from device tree or pdata, instead of waiting until dsa_dst_parse. Now that -EPROBE_DEFER is returned before we add the switch to the tree, there is no need to check for this error after dsa_dst_parse. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Assign a port's type at parsed time instead of waiting for the tree to be completed. Because this is now done earlier, we can use the port's type in dsa_port_is_* helpers instead of digging again in topology description. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Add symmetrical DSA port parsing functions for pdata and device tree, used to parse and validate a given port node or platform data. They don't do much for the moment but will be extended later on to assign a port type and get device references. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
There is no point into hiding the -EINVAL error code in ERR_PTR from a dsa_get_ports function, simply get the "ports" node directly from within the dsa_parse_ports_dn function. This also has the effect to make the pdata and device tree handling code symmetrical inside _dsa_register_switch. At the same time, rename dsa_parse_ports_dn to dsa_parse_ports_of because _of is a more common suffix for device tree parsing functions. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
This field has never been used. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
These variables have never been used. Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
With conversion to refcount_t, such manual debugging code doesn't make sense anymore. The tunnel part was already dropped by 54652eb1 ("l2tp: hold tunnel while looking up sessions in l2tp_netlink"). Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
The ->ref() and ->deref() callbacks are unused since PPP stopped using them in ee40fb2e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU"). We can thus remove them from struct l2tp_session and drop the do_ref parameter of l2tp_session_get*(). Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amritha Nambiar 提交于
This patch offloads the classid to hardware and uses the classid reserved in the range :ffe0 - :ffef to identify hardware traffic classes reported via dev->num_tc. tcf_result structure contains the class ID of the class to which the packet belongs and is offloaded to hardware via flower filter. A new helper function is introduced to represent HW traffic classes 0 through 15 using the reserved classid values :ffe0 - :ffef. Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com> Acked-by: NShannon Nelson <shannon.nelson@oracle.com> Tested-by: NAndrew Bowers <andrewx.bowers@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 31 10月, 2017 4 次提交
-
-
由 Steffen Klassert 提交于
We reset the encapsulation field of the skb too early in xfrm_output. As a result, the GRE GSO handler does not segment the packets. This leads to a performance drop down. We fix this by resetting the encapsulation field right before we do the transformation, when the inner headers become invalid. Fixes: f1bd7d65 ("xfrm: Add encapsulation header offsets while SKB is not encrypted") Reported-by: NVicente De Luca <vdeluca@zendesk.com> Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>
-
由 Cong Wang 提交于
In commit 7aa0045d ("net_sched: introduce a workqueue for RCU callbacks of tc filter") I defer tcf_chain_flush() to a workqueue, this causes a use-after-free because qdisc is already destroyed after we queue this work. The tcf_block_put_deferred() is no longer necessary after we get RTNL for each tc filter destroy work, no others could jump in at this point. Same for tcf_chain_hold(), we are fully serialized now. This also reduces one indirection therefore makes the code more readable. Note this brings back a rcu_barrier(), however comparing to the code prior to commit 7aa0045d we still reduced one rcu_barrier(). For net-next, we can consider to refcnt tcf block to avoid it. Fixes: 7aa0045d ("net_sched: introduce a workqueue for RCU callbacks of tc filter") Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Nault 提交于
Use l2tp_tunnel_get() in pppol2tp_connect() to ensure the tunnel isn't going to disappear while processing the rest of the function. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jakub Kicinski 提交于
bpf_getsockopt bpf call sets the ret variable to zero and never changes it. What's worse in case CONFIG_INET is not selected the variable is completely unused generating a warning. Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com> Acked-by: NLawrence Brakmo <brakmo@fb.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2017 2 次提交
-
-
由 Marcel Holtmann 提交于
In case of using BT_ERR and BT_INFO, convert to bt_dev_err and bt_dev_info when possible. This allows for controller specific reporting. Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>
-
Mart reported a deadlock in -RT in the call path: hci_send_monitor_ctrl_event() -> hci_send_to_channel() because both functions acquire the same read lock hci_sk_list.lock. This is also a mainline issue because the qrwlock implementation is writer fair (the traditional rwlock implementation is reader biased). To avoid the deadlock there is now __hci_send_to_channel() which expects the readlock to be held. Fixes: 38ceaa00 ("Bluetooth: Add support for sending MGMT commands and events to monitor") Reported-by: NMart van de Wege <mvdwege@gmail.com> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-