Merge tag 'drm-intel-next-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel into drm-next

Fixes for 3.20. I did stick the gen3/4 reset work from Ville in because we
have an awful lot of gen4 mesa hangs, and with this reset should also work
on vintage i965g/gm (we already have reset for g4x/gen4.5). So should help
to appease users suffering from these hangs. Otherwise all over.

This is the last 3.20 pull from me, from here on Jani will take over. By Ville Syrjälä (8) and others
* tag 'drm-intel-next-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Reject modeset when the same digital port is used more than once
  drm/i915: mask RPS IRQs properly when disabling RPS
  drm/i915: Tune down spurious CRC interrupt warning
  drm/i915: Fix context object leak for legacy contexts
  drm/i915/skl: Update in Gen9 multi-engine forcewake range
  drm/i915/eDP: When enabling panel VDD cancel pending disable worker
  drm/i915: Handle runtime pm in the CRC setup code
  drm/i915: Disable crtcs gracefully before GPU reset on gen3/4
  drm/i915: Grab modeset locks for GPU rest on pre-ctg
  drm/i915: Implement GPU reset for g33
  drm/i915: Implement GPU reset for 915/945
  drm/i915: Restore the display config after a GPU reset on gen4
  drm/i915: Fix gen4 GPU reset
  drm/i915: Stop gathering error states for CS error interrupts
  drm/i915: Disallow pin ioctl completely for kms drivers
  drm/i915: Only warn the first time we attempt to mmio whilst suspended
  drm/i915/chv: Enable AVI, SPD and HDMI infoframes for CHV.
  drm/i915: Don't clobber crtc->new_config when nothing changes

Just three more fixes for 3.19.
This is the last request until -rc1. I will have our QA team run a full
HSA stack test on 3.19-rc1 and if we find problems, I will send a fixes pull
request.

* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Set *buffer_ptr to NULL in case of error
  amdkfd: use atomic allocations within srcu callbacks
  amdkfd: use sizeof(long) granularity for the pasid bitmask

- More cursor and hotspot handling fixes
- Fix some typos in the new smc fan control code and enable on CI
- VM and CS cleanups

* 'drm-next-3.19-wip' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: enable smc fan control on CI
  drm/radeon: use pointers instead of indexes for CS chunks
  drm/radeon: remove duplicates check
  drm/ttm: optionally move duplicates to a separate list
  drm/radeon: check the right ring in radeon_evict_flags()
  drm/radeon: fix copy paste typos in fan control for si/ci
  drm/radeon: Hide cursor on CRTCs used by fbdev (v2)
  drm/radeon: add spinlock for BO_VA status protection (v2)
  drm/radeon: fence PT updates as shared
  drm/radeon: rename radeon_cs_reloc to radeon_bo_list
  drm/radeon: drop the handle from radeon_cs_reloc
  drm/radeon drop gobj from radeon_cs_reloc
  drm/radeon: fix typo in new fan control registers for SI/CI
  drm/radeon: sync all BOs involved in a CS
  drm/radeon: Move hotspot handling out of radeon_set_cursor
  drm/radeon: Re-show the cursor after a modeset

In function acquire_packet_buffer() we may return -ENOMEM. In that case, we
should set the *buffer_ptr to NULL, so that calling functions which check the
*buffer_ptr value as a criteria for success, will know that
acquire_packet_buffer() failed.
Reviewed-by: NAlexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

This seems to work well on CI boards after fixing the
last few bugs noticed by Chernovsky Oleg.

On boards with a high default fan speed this should
reduce fan noise.  Manual fan control is not enabled
yet.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Nobody is interested at which index the chunk is. What's needed is
a pointer to the chunk. Remove unused chunk_id field as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Completely unnecessary since the ww_mutex used to reserve a buffer
can detect double reservations from the same thread anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch adds an optional list_head parameter to ttm_eu_reserve_buffers.
If specified duplicates in the execbuf list are no longer reported as errors,
but moved to this list instead.
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check the that ring we are using for copies is functional
rather than the GFX ring.  On newer asics we use the DMA
ring for bo moves.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Since we are now preserving the cursor across modesets, the cursor could
be left over in console if e.g. X crashed.

v2: add comment about universal plane support
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Stop using the VM mutex for this

v2: fix typo in comment
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The BO_VA contains everything necessary.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better match what it is actually doing.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only used for duplicate check and that
can be done on the original as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only used once after initializing and that
ptr can be calculated from the BO as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not just the userspace relocs, otherwise we won't wait
for a swapped out page tables to be swapped in again.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's only needed in radeon_crtc_cursor_set2.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Setting a mode seems to clear the cursor registers, so we need to
re-program them to make sure the cursor is visible.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

srcu callbacks are running in atomic context, we can't allocate using
__GFP_WAIT.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

All the bit operations (such as find_first_zero_bit()) read sizeof(long) bytes
at a time. If we allocated less than sizeof(long) bytes for the bitmask we
would be accessing invalid memory when working with the bitmask.

Change the allocator to allocate sizeof(long) multiples for the bitmask.
Signed-off-by: NSasha Levin <sasha.levin@oracle.com>
Signed-off-by: NOded Gabbay <oded.gabbay@amd.com>

some vmware fixes.

* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: (Re)bind shaders to MOBs with the correct offset
  drm/vmwgfx: Fix fence event code
  drm/vmwgfx: Don't use memory accounting for kernel-side fence objects
  drm/vmwgfx: Fix error printout on signals pending

This codepath is mostly hit when rebinding after a backup buffer swapout. It's
amazing that this error hasn't been more obvious but probably the shaders are
not reread from guest memory that often..
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

The commit "vmwgfx: Rework fence event action" introduced a number of bugs
that are fixed with this commit:

a) A forgotten return stateemnt.
b) An if statement with identical branches.

Cc: <stable@vger.kernel.org>
Reported-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Kernel side fence objects are used when unbinding resources and may thus be
created as part of a memory reclaim operation. This might trigger recursive
memory reclaims and result in the kernel running out of stack space.

So a simple way out is to avoid accounting of these fence objects.
In principle this is OK since while user-space can trigger the creation of
such objects, it can't really hold on to them. However, their lifetime is
quite long, so some form of accounting should perhaps be implemented in the
future.

Fixes kernel crashes when running, for example viewperf11 ensight-04 test 3
with low system memory settings.

Cc: <stable@vger.kernel.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

The function vmw_master_check() might return -ERESTARTSYS if there is a
signal pending, indicating that the IOCTL should be rerun, potentially from
user-space. At that point we shouldn't print out an error message since that
is not an error condition. In short, avoid bloating the kernel log when a
process refuses to die on SIGTERM.

Cc: <stable@vger.kernel.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

On pre-HSW we have two encoders per digital port: one HDMI, one DP.
However they are the same physical port in hardware and we can't enable
both at the same time. Reject the modeset if the user attempts this.

So far we've been saved by the fact that we never see both HDMI and DP
connectors as connected. But if the user decides to force a mode anyway,
all kinds of funny stuff might happen.

Unfortunately we don't seem to have any way to inform userspace that
such configurations are invalid except by returning an error from
setcrtc. possible_clones only covers real cloning situations, and
looking at the connector names doesn't work either since we don't
always register both connectors for the same port. I suppose the
only way to fix that would be to expose only a single encoder per
digital port like we do on HSW+ but that would be a fairly large
undertaking for little gain.

kms_setmode hits this since it forces modes on non-connected VGA and
HDMI connectors. Previosuly it just resulted in weirdness such as
failed link training. With this patch it will now get an error back
from the kernel and will die with an assert since it thinks that the
configuration should be fine.

v2: Deal with INTEL_OUTPUT_UNKNOWN (Paulo)

Cc: Paulo Zanoni <przanoni@gmail.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Atm, igt/gem_reset_stats can trigger the recently added WARN on
left-over PM_IIR bits in gen6_enable_rps_interrupts(). There are two
reasons for this:
1. we call intel_enable_gt_powersave() without a preceeding
   intel_disable_gt_powersave()
2. gen6_disable_rps_interrupts() doesn't mask interrupts in PM_IMR

1. means RPS interrupts will remain enabled and can be serviced during
the HW initialization after a GPU reset. 2. means even if we called
gen6_disable_rps_interrupts() any new RPS interrupt during RPS
initialization would still propagate to PM_IIR too early (though
wouldn't be serviced).

This patch solves the 2. issue by also masking interrupts in PM_IMR, the
following patch fixes 1. getting rid of the WARN. This also makes
intel_enable_gt_powersave() and intel_disable_gt_powersave() more
symmetric.

Since gen6_disable_rps_interrupts() is called during driver loading with
i915 interrupts disabled add a new version of gen6_disable_pm_irq() that
doesn't WARN for this.

Also while at it, get the irq_lock around the whole PM_IMR/IER/IIR
programming sequence and make sure that any queued PM_IIR bit is also
cleared.

The WARN was caught by PRTS after I sent my previous RPS sanitizing
patchset and I could easily reproduce it on HSW. To actually fix it we
also need the next patch.
Reported-by: NHe, Shuang <shuang.he@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't really synchronously turn them off from debugfs. We try to
avoid hitting them too badly by waiting one vblank, but apparently the
irq handler can still race through that gap.

Since this isn't really all that important for testcases, only for
debugging CRC issues let's tune it down to a debug message.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82602
Cc: Damien Lespiau <damien.lespiau@intel.com>
Acked-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Dynamic context pinning for LRCs introduced a leak in legacy mode.
Reinstate context unreference in i915_gem_free_request for legacy contexts.

Leak reported by i-g-t/drv_module_reload fixed by this patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86507Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Reviewed-by: John Harrison<John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Updates in forcewake range for Render/Media/Common
power wells for Gen9.
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NZhe Wang <zhe1.wang@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Before testing if the panel VDD is enabled on eDP cancel any pending
disable worker. This makes sure the worker will be triggered with a
delay from the last time edp_panel_vdd_schedule_off() is called, not
the first time. This avoids unnecessary overhead.

https://bugs.freedesktop.org/show_bug.cgi?id=86201

v2: use cancel_delayed_work() instead of cancel_delayed_work_sync()
as the pps_mutexes will provide the required serialization with
edp_panel_vdd_work() while the sync variant may deadlock. Suggested
by Ville Syrjälä <ville.syrjala@linux.intel.com>.
Made commit message a bit clearer.
Signed-off-by: NEgbert Eich <eich@suse.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The crc code doesn't handle anything really that could drop the
register state (by design so that we have less complexity). Which
means userspace may only start crc capture once the pipe is fully set
up.

With an i-g-t patch this will be the case, but there's still the
problem that this results in obscure unclaimed register write
failures. Which is a pain to debug.

So instead make sure we don't have the basic unclaimed register write
failure by grabbing runtime pm references. And reject completely
invalid requests with -EIO. This is still racy of course, but for a
test library we don't really care - if userspace shuts down the pipe
right afterwards the entire setup will be lost anyway.

v2: Put instead of get, spotted by Damien. Also explain the runtime pm
dance.

v3: There's really no need for rpm get/put since power_is_enabled only
checks software state (Damien).

References: https://bugs.freedesktop.org/show_bug.cgi?id=86092
Cc: Damien Lespiau <damien.lespiau@intel.com> (v2)
Tested-by: Nlu hua <huax.lu@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

The GPU reset also resets the display on gen3/4. The g33 docs say we
should disable all planes before flipping the reset switch. Just
disable all the crtcs instead. That seems a nicer thing to do anyway.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On gen4 and earlier the GPU reset also resets the display, so we should
protect against concurrent modeset operations. Grab all the modeset locks
around the entire GPU reset dance, remebering first ti dislogde any
pending page flip to make sure we don't deadlock. Any pageflip coming
in between these two steps should fail anyway due to reset_in_progress,
so this should be safe.

This fixes a lot of failed asserts in the modeset code when there's a
modeset racing with the reset. Naturally the asserts aren't happy when
the expected state has disappeared.

v2: Drop UMS checks, complete pending flips after the reset (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

g33 seems to sit somewhere between the 915/945/965 style and the
g4x style. The bits look like g4x, but we still need to do a full
reset including display.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

915/945 have the same reset registers as 965, so share the code.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg GPU reset also resets the display hardware. Force a mode
restore after the GPU reset, and also re-init clock gating.

v2: Use intel_modeset_init_hw() instead of intel_init_clock_gating()
    in case more relevant stuff gets added there at some point
    Restore interrupts after the reset as well
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On pre-ctg the reset bit directly controls the reset signal. We must
assert it for >=20usec and then deassert it. Bit 1 is a RO status bit
which should also go down when the reset is no longer asserted.
Tested-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>