A guest may not be configured to support RDSEED, even when the host
does. If the guest does not support RDSEED, intercept the instruction
and synthesize #UD. Also clear the "allowed-1" bit for RDSEED exiting
in the IA32_VMX_PROCBASED_CTLS2 MSR.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

A guest may not be configured to support RDRAND, even when the host
does. If the guest does not support RDRAND, intercept the instruction
and synthesize #UD. Also clear the "allowed-1" bit for RDRAND exiting
in the IA32_VMX_PROCBASED_CTLS2 MSR.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently, secondary execution controls are divided in three groups:

- static, depending mostly on the module arguments or the processor
  (vmx_secondary_exec_control)

- static, depending on CPUID (vmx_cpuid_update)

- dynamic, depending on nested VMX or local APIC state

Because walking CPUID is expensive, prepare_vmcs02 is using only
the first group.  This however is unnecessarily complicated.  Just
cache the static secondary execution controls, and then prepare_vmcs02
does not need to compute them every time.  Computation of all static
secondary execution controls is now kept in a single function,
vmx_compute_secondary_exec_control.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Enable the Virtual GIF feature. This is done by setting bit 25 at position
60h in the vmcb.

With this feature enabled, the processor uses bit 9 at position 60h as the
virtual GIF when executing STGI/CLGI instructions.

Since the execution of STGI by the L1 hypervisor does not cause a return to
the outermost (L0) hypervisor, the enable_irq_window and enable_nmi_window
are modified.

The IRQ window will be opened even if GIF is not set, under the assumption
that on resuming the L1 hypervisor the IRQ will be held pending until the
processor executes the STGI instruction.

For the NMI window, the STGI intercept is set. This will assist in opening
the window only when GIF=1.
Signed-off-by: NJanakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a new cpufeature definition for Virtual GIF.
Signed-off-by: NJanakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We already always set that type but don't check if it is supported. Also
for nVMX, we only support WB for now. Let's just require it.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Don't use shifts, tag them correctly as EPTP and use better matching
names (PWL vs. GAW).
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

With lightly tweaked defconfig:

    text    data     bss      dec     hex filename
11259661 5109408 2981888 19350957 12745ad vmlinux.before
11259661 5109408  884736 17253805 10745ad vmlinux.after

Only compile-tested.
Signed-off-by: NDenys Vlasenko <dvlasenk@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: pbonzini@redhat.com
Cc: rkrcmar@redhat.com
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

There is currently some confusion between nested and L1 GPAs.  The
assignment to "direct" in kvm_mmu_page_fault tries to fix that, but
it is not enough.  What this patch does is fence off the MMIO cache
completely when using shadow nested page tables, since we have neither
a GVA nor an L1 GPA to put in the cache.  This also allows some
simplifications in kvm_mmu_page_fault and FNAME(page_fault).

The EPT misconfig likewise does not have an L1 GPA to pass to
kvm_io_bus_write, so that must be skipped for guest mode.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
[Changed comment to say "GPAs" instead of "L1's physical addresses", as
 per David's review. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

When a guest causes a page fault which requires emulation, the
vcpu->arch.gpa_available flag is set to indicate that cr2 contains a
valid GPA.

Currently, emulator_read_write_onepage() makes use of gpa_available flag
to avoid a guest page walk for a known MMIO regions. Lets not limit
the gpa_available optimization to just MMIO region. The patch extends
the check to avoid page walk whenever gpa_available flag is set.
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
[Fix EPT=0 according to Wanpeng Li's fix, plus ensure VMX also uses the
 new code. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
[Moved "ret < 0" to the else brach, as per David's review. - Radim]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Calling handle_mmio_page_fault() has been unnecessary since commit
e9ee956e ("KVM: x86: MMU: Move handle_mmio_page_fault() call to
kvm_mmu_page_fault()", 2016-02-22).

handle_mmio_page_fault() can now be made static.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

When PAGE_OFFSET is not a compile-time constant, we run into
warnings from the use of kvm_is_error_hva() that the compiler
cannot optimize out:

arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function '__kvm_gfn_to_hva_cache_init':
arch/arm/kvm/../../../virt/kvm/kvm_main.c:1978:14: error: 'nr_pages_avail' may be used uninitialized in this function [-Werror=maybe-uninitialized]
arch/arm/kvm/../../../virt/kvm/kvm_main.c: In function 'gfn_to_page_many_atomic':
arch/arm/kvm/../../../virt/kvm/kvm_main.c:1660:5: error: 'entry' may be used uninitialized in this function [-Werror=maybe-uninitialized]

This adds fake initializations to the two instances I ran into.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Host-initiated writes to the IA32_APIC_BASE MSR do not have to follow
local APIC state transition constraints, but the value written must be
valid.
Signed-off-by: NJim Mattson <jmattson@google.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Bailing out immediately if there is no available mmu page to alloc.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

watchdog: BUG: soft lockup - CPU#5 stuck for 22s! [warn_test:3089]
 irq event stamp: 20532
 hardirqs last  enabled at (20531): [<ffffffff8e9b6908>] restore_regs_and_iret+0x0/0x1d
 hardirqs last disabled at (20532): [<ffffffff8e9b7ae8>] apic_timer_interrupt+0x98/0xb0
 softirqs last  enabled at (8266): [<ffffffff8e9badc6>] __do_softirq+0x206/0x4c1
 softirqs last disabled at (8253): [<ffffffff8e083918>] irq_exit+0xf8/0x100
 CPU: 5 PID: 3089 Comm: warn_test Tainted: G           OE   4.13.0-rc3+ #8
 RIP: 0010:kvm_mmu_prepare_zap_page+0x72/0x4b0 [kvm]
 Call Trace:
  make_mmu_pages_available.isra.120+0x71/0xc0 [kvm]
  kvm_mmu_load+0x1cf/0x410 [kvm]
  kvm_arch_vcpu_ioctl_run+0x1316/0x1bf0 [kvm]
  kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
  ? __fget+0xfc/0x210
  do_vfs_ioctl+0xa4/0x6a0
  ? __fget+0x11d/0x210
  SyS_ioctl+0x79/0x90
  entry_SYSCALL_64_fastpath+0x23/0xc2
  ? __this_cpu_preempt_check+0x13/0x20

This can be reproduced readily by ept=N and running syzkaller tests since
many syzkaller testcases don't setup any memory regions. However, if ept=Y
rmode identity map will be created, then kvm_mmu_calculate_mmu_pages() will
extend the number of VM's mmu pages to at least KVM_MIN_ALLOC_MMU_PAGES
which just hide the issue.

I saw the scenario kvm->arch.n_max_mmu_pages == 0 && kvm->arch.n_used_mmu_pages == 1,
so there is one active mmu page on the list, kvm_mmu_prepare_zap_page() fails
to zap any pages, however prepare_zap_oldest_mmu_page() always returns true.
It incurs infinite loop in make_mmu_pages_available() which causes mmu->lock
softlockup.

This patch fixes it by setting the return value of prepare_zap_oldest_mmu_page()
according to whether or not there is mmu page zapped.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Let's reuse the function introduced with eptp switching.

We don't explicitly have to check against enable_ept_ad_bits, as this
is implicitly done when checking against nested_vmx_ept_caps in
valid_ept_address().
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Remove nonexistent files, allow less awkward expressions when
extracting arch-specific information, and only return relevant
information when using arch-specific expressions. Additionally
add include/trace/events/kvm.h, arch/*/include/uapi/asm/kvm*,
and arch/powerpc/kernel/kvm* to appropriate sections. The arch-
specific expressions are now:

 /KVM/                                        -- All KVM
 /\(KVM\)|\(KVM\/x86\)/                       -- X86
 /\(KVM\)|\(KVM\/x86\)|\(KVM\/amd\)/          -- X86 plus AMD
 /\(KVM\)|\(KVM\/arm\)/                       -- ARM
 /\(KVM\)|\(KVM\/arm\)|\(KVM\/arm64\)/        -- ARM plus ARM64
 /\(KVM\)|\(KVM\/powerpc\)/                   -- POWERPC
 /\(KVM\)|\(KVM\/s390\)/                      -- S390
 /\(KVM\)|\(KVM\/mips\)/                      -- MIPS
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Acked-by: NCornelia Huck <cohuck@redhat.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is the same as commit 14727754 ("kvm: svm: Add support for
additional SVM NPF error codes", 2016-11-23), but for Intel processors.
In this case, the exit qualification field's bit 8 says whether the
EPT violation occurred while translating the guest's final physical
address or rather while translating the guest page tables.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 14727754 ("kvm: svm: Add support for additional SVM NPF error
codes", 2016-11-23) added a new error code to aid nested page fault
handling.  The commit unprotects (kvm_mmu_unprotect_page) the page when
we get a NPF due to guest page table walk where the page was marked RO.

However, if an L0->L2 shadow nested page table can also be marked read-only
when a page is read only in L1's nested page table.  If such a page
is accessed by L2 while walking page tables it can cause a nested
page fault (page table walks are write accesses).  However, after
kvm_mmu_unprotect_page we may get another page fault, and again in an
endless stream.

To cover this use case, we qualify the new error_code check with
vcpu->arch.mmu_direct_map so that the error_code check would run on L1
guest, and not the L2 guest.  This avoids hitting the above scenario.

Fixes: 14727754
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reported by syzkaller:

The kvm-intel.unrestricted_guest=0

   WARNING: CPU: 5 PID: 1014 at /home/kernel/data/kvm/arch/x86/kvm//x86.c:7227 kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
   CPU: 5 PID: 1014 Comm: warn_test Tainted: G        W  OE   4.13.0-rc3+ #8
   RIP: 0010:kvm_arch_vcpu_ioctl_run+0x38b/0x1be0 [kvm]
   Call Trace:
    ? put_pid+0x3a/0x50
    ? rcu_read_lock_sched_held+0x79/0x80
    ? kmem_cache_free+0x2f2/0x350
    kvm_vcpu_ioctl+0x340/0x700 [kvm]
    ? kvm_vcpu_ioctl+0x340/0x700 [kvm]
    ? __fget+0xfc/0x210
    do_vfs_ioctl+0xa4/0x6a0
    ? __fget+0x11d/0x210
    SyS_ioctl+0x79/0x90
    entry_SYSCALL_64_fastpath+0x23/0xc2
    ? __this_cpu_preempt_check+0x13/0x20

The syszkaller folks reported a residual mmio emulation request to userspace
due to vm86 fails to emulate inject real mode interrupt(fails to read CS) and
incurs a triple fault. The vCPU returns to userspace with vcpu->mmio_needed == true
and KVM_EXIT_SHUTDOWN exit reason. However, the syszkaller testcase constructs
several threads to launch the same vCPU, the thread which lauch this vCPU after
the thread whichs get the vcpu->mmio_needed == true and KVM_EXIT_SHUTDOWN will
trigger the warning.

   #define _GNU_SOURCE
   #include <pthread.h>
   #include <stdio.h>
   #include <stdlib.h>
   #include <string.h>
   #include <sys/wait.h>
   #include <sys/types.h>
   #include <sys/stat.h>
   #include <sys/mman.h>
   #include <fcntl.h>
   #include <unistd.h>
   #include <linux/kvm.h>
   #include <stdio.h>

   int kvmcpu;
   struct kvm_run *run;

   void* thr(void* arg)
   {
     int res;
     res = ioctl(kvmcpu, KVM_RUN, 0);
     printf("ret1=%d exit_reason=%d suberror=%d\n",
         res, run->exit_reason, run->internal.suberror);
     return 0;
   }

   void test()
   {
     int i, kvm, kvmvm;
     pthread_t th[4];

     kvm = open("/dev/kvm", O_RDWR);
     kvmvm = ioctl(kvm, KVM_CREATE_VM, 0);
     kvmcpu = ioctl(kvmvm, KVM_CREATE_VCPU, 0);
     run = (struct kvm_run*)mmap(0, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, kvmcpu, 0);
     srand(getpid());
     for (i = 0; i < 4; i++) {
       pthread_create(&th[i], 0, thr, 0);
       usleep(rand() % 10000);
     }
     for (i = 0; i < 4; i++)
       pthread_join(th[i], 0);
   }

   int main()
   {
     for (;;) {
       int pid = fork();
       if (pid < 0)
         exit(1);
       if (pid == 0) {
         test();
         exit(0);
       }
       int status;
       while (waitpid(pid, &status, __WALL) != pid) {}
     }
     return 0;
   }

This patch fixes it by resetting the vcpu->mmio_needed once we receive
the triple fault to avoid the residue.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This implements the kvm_arch_vcpu_in_kernel() for ARM, and adjusts
the calls to kvm_vcpu_on_spin().
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This implements kvm_arch_vcpu_in_kernel() for s390.  DIAG is a privileged
operation, so it cannot be called from problem state (user mode).
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

get_cpl requires vcpu_load, so we must cache the result (whether the
vcpu was preempted when its cpl=0) in kvm_vcpu_arch.
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If a vcpu exits due to request a user mode spinlock, then
the spinlock-holder may be preempted in user mode or kernel mode.
(Note that not all architectures trap spin loops in user mode,
only AMD x86 and ARM/ARM64 currently do).

But if a vcpu exits in kernel mode, then the holder must be
preempted in kernel mode, so we should choose a vcpu in kernel mode
as a more likely candidate for the lock holder.

This introduces kvm_arch_vcpu_in_kernel() to decide whether the
vcpu is in kernel-mode when it's preempted.  kvm_vcpu_on_spin's
new argument says the same of the spinning VCPU.
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add guest_cpuid_clear() and use it instead of kvm_find_cpuid_entry().
Also replace some uses of kvm_find_cpuid_entry() with guest_cpuid_has().
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch turns guest_cpuid_has_XYZ(cpuid) into guest_cpuid_has(cpuid,
X86_FEATURE_XYZ), which gets rid of many very similar helpers.

When seeing a X86_FEATURE_*, we can know which cpuid it belongs to, but
this information isn't in common code, so we recreate it for KVM.

Add some BUILD_BUG_ONs to make sure that it runs nicely.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

bit(X86_FEATURE_NRIPS) is 3 since 2ccd71f1 ("x86/cpufeature: Move
some of the scattered feature bits to x86_capability"), so we can
simplify the code.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When L2 uses vmfunc, L0 utilizes the associated vmexit to
emulate a switching of the ept pointer by reloading the
guest MMU.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBandan Das <bsd@redhat.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Expose VMFUNC in MSRs and VMCS fields. No actual VMFUNCs are enabled.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBandan Das <bsd@redhat.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Enable VMFUNC in the secondary execution controls.  This simplifies the
changes necessary to expose it to nested hypervisors.  VMFUNCs still
cause #UD when invoked.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBandan Das <bsd@redhat.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Let's also just use the underlying functions directly here.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
[Rebased on top of 9f744c59 ("KVM: nVMX: do not pin the VMCS12")]
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

nested_get_page() just sounds confusing. All we want is a page from G1.
This is even unrelated to nested.

Let's introduce kvm_vcpu_gpa_to_page() so we don't get too lengthy
lines.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
[Squash pasto fix from Wanpeng Li. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Expose the "Enable INVPCID" secondary execution control to the guest
and properly reflect the exit reason.

In addition, before this patch the guest was always running with
INVPCID enabled, causing pcid.flat's "Test on INVPCID when disabled"
test to fail.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It has been experimentally confirmed that supporting these two MSRs is one
of the necessary conditions for nested Hyper-V to use the TSC page. Modern
Windows guests are noticeably slower when they fall back to reading
timestamps from the HV_X64_MSR_TIME_REF_COUNT MSR instead of using the TSC
page.

The newly supported MSRs are advertised with the AccessFrequencyRegs
partition privilege flag and CPUID.40000003H:EDX[8] "Support for
determining timer frequencies is available" (both outside of the scope of
this KVM patch).
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pull x86 platform driver fix from Darren Hart:
 "Fix loop preventing some platforms from waking up via the power button
  in s2idle:

   - intel-vbtn: match power button on press rather than release"

* tag 'platform-drivers-x86-v4.13-4' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: intel-vbtn: match power button on press rather than release

Pull ext4 fixes from Ted Ts'o:
 "A large number of ext4 bug fixes and cleanups for v4.13"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix copy paste error in ext4_swap_extents()
  ext4: fix overflow caused by missing cast in ext4_resize_fs()
  ext4, project: expand inode extra size if possible
  ext4: cleanup ext4_expand_extra_isize_ea()
  ext4: restructure ext4_expand_extra_isize
  ext4: fix forgetten xattr lock protection in ext4_expand_extra_isize
  ext4: make xattr inode reads faster
  ext4: inplace xattr block update fails to deduplicate blocks
  ext4: remove unused mode parameter
  ext4: fix warning about stack corruption
  ext4: fix dir_nlink behaviour
  ext4: silence array overflow warning
  ext4: fix SEEK_HOLE/SEEK_DATA for blocksize < pagesize
  ext4: release discard bio after sending discard commands
  ext4: convert swap_inode_data() over to use swap() on most of the fields
  ext4: error should be cleared if ea_inode isn't added to the cache
  ext4: Don't clear SGID when inheriting ACLs
  ext4: preserve i_mode if __ext4_set_acl() fails
  ext4: remove unused metadata accounting variables
  ext4: correct comment references to ext4_ext_direct_IO()

Pull MIPS fixes from Ralf Baechle:
 "This fixes two build issues for ralink platforms, both due to missing
  #includes which used to be included indirectly via other headers"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: ralink: mt7620: Add missing header
  MIPS: ralink: Fix build error due to missing header

The latest change of compat_sys_sigpending in commit 8f13621a
("sigpending(): move compat to native") has broken it in two ways.

First, it tries to write 4 bytes more than userspace expects:
sizeof(old_sigset_t) == sizeof(long) == 8 instead of
sizeof(compat_old_sigset_t) == sizeof(u32) == 4.

Second, on big endian architectures these bytes are being written in the
wrong order.

This bug was found by strace test suite.
Reported-by: NAnatoly Pugachev <matorola@gmail.com>
Inspired-by: NEugene Syromyatnikov <evgsyr@gmail.com>
Fixes: 8f13621a ("sigpending(): move compat to native")
Signed-off-by: NDmitry V. Levin <ldv@altlinux.org>
Acked-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This bug was found by a static code checker tool for copy paste
problems.
Signed-off-by: NManinder Singh <maninder1.s@samsung.com>
Signed-off-by: NVaneet Narang <v.narang@samsung.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>