Display bus_dsm_mask in sysfs as /sys/bus/nd/devices/ndbusX/nfit/dsm_mask.
Signed-off-by: NJerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add a bus level dsm_mask to nvdimm_bus_descriptor to allow the passthru
calling mechanism to specify a different mask from the cmd_mask.

Populate bus_dsm_mask and use it to filter dsm calls that user can
make through the pass thru interface.
Signed-off-by: NJerry Hoemann <jerry.hoemann@hpe.com>
[djbw: use command number constants instead of a magic mask value]
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Set ND_CMD_CALL in the cmd_mask to enable calling root
functions via the pass thru mechanism.
Signed-off-by: NJerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

File size before:
   text	   data	    bss	    dec	    hex	filename
  20792	   1580	    994	  23366	   5b46	drivers/acpi/nfit/core.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  20968	   1388	    994	  23350	   5b36	drivers/acpi/nfit/core.o
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

ACPI 6.2 defines a new ACPI notification value to NVDIMM Root Device
in Table 5-169.

 0x81 Unconsumed Uncorrectable Memory Error Detected
      Used to pro-actively notify OSPM of uncorrectable memory errors
      detected (for example a memory scrubbing engine that continuously
      scans the NVDIMMs memory). This is an optional notification. Only
      locations that were mapped in to SPA by the platform will generate
      a notification.

Add support of this notification value by initiating an ARS scan. This
will find new error locations and add their badblocks information.

Link: http://www.uefi.org/sites/default/files/resources/ACPI_6_2.pdfSigned-off-by: NToshi Kani <toshi.kani@hpe.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Starting with the v1.2 definition of namespace labels, the isetcookie
field is populated and validated for blk-aperture namespaces. This adds
some safety against inadvertent copying of namespace labels from one
DIMM-device to another.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The type_guid refers to the "Address Range Type GUID" for the region
backing a namespace as defined the ACPI NFIT (NVDIMM Firmware Interface
Table). This 'type' identifier specifies an access mechanism for the
given namespace. This capability replaces the confusing usage of the
'NSLABEL_FLAG_LOCAL' flag to indicate a block-aperture-mode namespace.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The interleave-set-cookie algorithm is extended to incorporate all the
same components that are used to generate an nvdimm unique-id. For
backwards compatibility we still maintain the old v1.1 definition.
Reported-by: NNicholas Moulin <nicholas.w.moulin@intel.com>
Reported-by: NKaushik Kanetkar <kaushik.a.kanetkar@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16
bytes. Instead we convert them to use guid_t type. At the same time we
convert current users.

acpi_str_to_uuid() becomes useless after the conversion and it's safe to
get rid of it.
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Cc: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Acked-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NFelipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: NMathias Nyman <mathias.nyman@linux.intel.com>
Reviewed-by: NHeikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: NMark Brown <broonie@kernel.org>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

There are new types and helpers that are supposed to be used in new code.

As a preparation to get rid of legacy types and API functions do
the conversion here.
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

The check for an MCE being a memory error in the NFIT mce handler was
bogus. Use the new mce_is_memory_error() helper to detect the error
properly.
Reported-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170519093915.15413-3-bp@alien8.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Per the latest version of the "NVDIMM DSM Interface Example" [1], the
label data retrieval routine can report a "locked" status. In this case
all regions associated with that DIMM are disabled until the label area
is unlocked. Provide generic libnvdimm enabling for NVDIMMs with label
data area locking capabilities.

[1]: http://pmem.io/documents/Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This is a preparation patch for handling locked nvdimm label regions, a
new concept as introduced by the latest DSM document on pmem.io [1]. A
future patch will leverage nvdimm_set_locked() at DIMM probe time to
flag regions that can not be enabled. There should be no functional
difference resulting from this change.

[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example-V1.3.pdfSigned-off-by: NDan Williams <dan.j.williams@intel.com>

Inevitably when one actually needs to debug a DSM issue it's on a
distribution kernel that has CONFIG_ACPI_NFIT_DEBUG=n. The config symbol
was only there to avoid the compile error due to the missing fallback for
print_hex_dump_debug in the CONFIG_DYNAMIC_DEBUG=n case. That was fixed
with commit cdf17449 "hexdump: do not print debug dumps for
!CONFIG_DEBUG", so the config symbol can just be dropped.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

memcpy_from_pmem() maps directly to memcpy_mcsafe(). The wrapper
serves no real benefit aside from affording a more generic function name
than the x86-specific 'mcsafe'. However this would not be the first time
that x86 terminology leaked into the global namespace. For lack of
better name, just use memcpy_mcsafe() directly.

This conversion also catches a place where we should have been using
plain memcpy, acpi_nfit_blk_single_io().

Cc: <x86@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The workqueue may still be running when the devres callbacks start
firing to deallocate an acpi_nfit_desc instance. Stop and flush the
workqueue before letting any other devres de-allocations proceed.
Reported-by: NLinda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The nvdimm probe flushing mechanism gives userspace a sync point where
it knows all asynchronous driver probe sequences have completed.
However, it need not wait for other asynchronous actions, like
on-demand address-range-scrub. Track the init work separately from other
work in the workqueue, and only flush the former.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Be tolerant of cases where the BIOS provided NFIT does not consistently
set the flags in all NVDIMM Region Mapping structures associated with a
given dimm.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Stop requiring dimms be successfully mapped into a
system-physical-address range. For provisioning and hardware remediation
purposes the kernel should account for failed devices in sysfs. If
possible it should still allow management commands to be sent to the
device.
Reported-by: NToshi Kani <toshi.kani@hpe.com>
Tested-by: NToshi Kani <toshi.kani@hpe.com>
Reported-by: NLinda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Add support for the ACPI_NFIT_MEM_MAP_FAILED ("map_fail") and
ACPI_NFIT_MEM_HEALTH_ENABLED ("smart_notify") health state flags. The
"map_fail" flag identifies DIMMs that were not mapped into one or more
physical address ranges. The "health_notify" flag indicates whether
platform firmware will send notifications when there is new SMART health
data to consume.
Acked-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Calls to acpi_get_table() must be paired with acpi_put_table() to undo
the mapping established by acpi_tb_acquire_table().

It turns out this has no effect in practice since the NFIT will already
be mapped to support the /sys/firmware/acpi/tables/NFIT attribute in
sysfs.

Fixes: 6b11d1d6 ("ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users")
Cc: Lv Zheng <lv.zheng@intel.com>
Reported-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The newline in MODULE_PARM_DESC causes modinfo to print the parameter
data type on a separate line, which is different from all the other
module parameters and could potentially cause a problem for someone
parsing the output of modinfo.
Signed-off-by: NLinda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Provide the ability to request a default DSM family. If it is not
supported, then fall back to the normal discovery order.

This is helpful for testing platforms that support multiple DSM
families.  It will also allow administrators to request the DSM family
that their management tools support, which may not be the first one
found using the current discovery order.
Signed-off-by: NLinda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

As it is today, we can't enable or test new NVDIMM management functions
provided by new firmware and tools without changing the kernel.  We also
can't prevent documented DSM functions from being called in the case of
buggy firmware.  This patch provides a module parameter that overrides
the DSM function mask that is built into the kernel.

If the "disable_vendor_specific" module parameter is also used we ignore
the new parameter.
Signed-off-by: NLinda Knippers <linda.knippers@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

While reviewing the -stable patch for commit 86ef58a4 "nfit,
libnvdimm: fix interleave set cookie calculation" Ben noted:

    "This is returning an int, thus it's effectively doing a 32-bit
     comparison and not the 64-bit comparison you say is needed."

Update the compare operation to be immune to this integer demotion problem.

Cc: <stable@vger.kernel.org>
Cc: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Fixes: 86ef58a4 ("nfit, libnvdimm: fix interleave set cookie calculation")
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The interleave-set cookie is a sum that sanity checks the composition of
an interleave set has not changed from when the namespace was initially
created.  The checksum is calculated by sorting the DIMMs by their
location in the interleave-set. The comparison for the sort must be
64-bit wide, not byte-by-byte as performed by memcmp() in the broken
case.

Fix the implementation to accept correct cookie values in addition to
the Linux "memcmp" order cookies, but only allow correct cookies to be
generated going forward. It does mean that namespaces created by
third-party-tooling, or created by newer kernels with this fix, will not
validate on older kernels. However, there are a couple mitigating
conditions:

    1/ platforms with namespace-label capable NVDIMMs are not widely
       available.

    2/ interleave-sets with a single-dimm are by definition not affected
       (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case.

The cookie stored in the namespace label will be fixed by any write the
namespace label, the most straightforward way to achieve this is to
write to the "alt_name" attribute of a namespace in sysfs.

Cc: <stable@vger.kernel.org>
Fixes: eaf96153 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure")
Reported-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com>
Tested-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

We queue an on-stack work item to 'nfit_wq' and wait for it to complete
as part of a 'flush_probe' request. However, if the user cancels the
wait we need to make sure the item is flushed from the queue otherwise
we are leaving an out-of-scope stack address on the work list.

 BUG: unable to handle kernel paging request at ffffbcb3c72f7cd0
 IP: [<ffffffffa9413a7b>] __list_add+0x1b/0xb0
 [..]
 RIP: 0010:[<ffffffffa9413a7b>]  [<ffffffffa9413a7b>] __list_add+0x1b/0xb0
 RSP: 0018:ffffbcb3c7ba7c00  EFLAGS: 00010046
 [..]
 Call Trace:
  [<ffffffffa90bb11a>] insert_work+0x3a/0xc0
  [<ffffffffa927fdda>] ? seq_open+0x5a/0xa0
  [<ffffffffa90bb30a>] __queue_work+0x16a/0x460
  [<ffffffffa90bbb08>] queue_work_on+0x38/0x40
  [<ffffffffc0cf2685>] acpi_nfit_flush_probe+0x95/0xc0 [nfit]
  [<ffffffffc0cf25d0>] ? nfit_visible+0x40/0x40 [nfit]
  [<ffffffffa9571495>] wait_probe_show+0x25/0x60
  [<ffffffffa9546b30>] dev_attr_show+0x20/0x50

Fixes: 7ae0fa43 ("nfit, libnvdimm: async region scrub workqueue")
Cc: <stable@vger.kernel.org>
Reviewed-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Assign all notifiers on the MCE decode chain a priority so that they get
called in the correct order.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170123183514.13356-10-bp@alien8.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch removes the users of the deprectated APIs:
 acpi_get_table_with_size()
 early_acpi_os_unmap_memory()
The following APIs should be used instead of:
 acpi_get_table()
 acpi_put_table()

The deprecated APIs are invented to be a replacement of acpi_get_table()
during the early stage so that the early mapped pointer will not be stored
in ACPICA core and thus the late stage acpi_get_table() won't return a
wrong pointer. The mapping size is returned just because it is required by
early_acpi_os_unmap_memory() to unmap the pointer during early stage.

But as the mapping size equals to the acpi_table_header.length
(see acpi_tb_init_table_descriptor() and acpi_tb_validate_table()), when
such a convenient result is returned, driver code will start to use it
instead of accessing acpi_table_header to obtain the length.

Thus this patch cleans up the drivers by replacing returned table size with
acpi_table_header.length, and should be a no-op.
Reported-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

A recent flurry of bug discoveries in the nfit driver's DSM marshalling
routine has highlighted the fact that we do not have unit test coverage
for this routine. Add a self-test of acpi_nfit_ctl() routine before
probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl()
and if any of the tests fail "nfit_test.0" will be unavailable causing
the rest of the tests to not run / fail.

This unit test will also be a place to land reproductions of quirky BIOS
behavior discovered in the field and ensure the kernel does not regress
against implementations it has seen in practice.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Given dimms and bus commands share the same command number space we need
to be careful that we are translating status in the correct context.
Otherwise we can, for example, fail an ND_CMD_GET_CONFIG_SIZE command
because max_xfer is zero. It fails because that condition erroneously
correlates with the 'cleared == 0' failure of ND_CMD_CLEAR_ERROR.

Cc: <stable@vger.kernel.org>
Fixes: aef25338 ("libnvdimm, nfit: centralize command status translation")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

If an ARS Status command returns truncated output, do not process
partial records or otherwise consume non-status fields.

Cc: <stable@vger.kernel.org>
Fixes: 0caeef63 ("libnvdimm: Add a poison list and export badblocks")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Given ambiguities in the ACPI 6.1 definition of the "Output (Size)"
field of the ARS (Address Range Scrub) Status command, a firmware
implementation may in practice return 0, 4, or 8 to indicate that there
is no output payload to process.

The specification states "Size of Output Buffer in bytes, including this
field.". However, 'Output Buffer' is also the name of the entire
payload, and earlier in the specification it states "Max Query ARS
Status Output Buffer Size: Maximum size of buffer (including the Status
and Extended Status fields)".

Without this fix if the BIOS happens to return 0 it causes memory
corruption as evidenced by this result from the acpi_nfit_ctl() unit
test.

 ars_status00000000: 00020000 00000000                    ........
 BUG: stack guard page was hit at ffffc90001750000 (stack is ffffc9000174c000..ffffc9000174ffff)
 kernel stack overflow (page fault): 0000 [#1] SMP DEBUG_PAGEALLOC
 task: ffff8803332d2ec0 task.stack: ffffc9000174c000
 RIP: 0010:[<ffffffff814cfe72>]  [<ffffffff814cfe72>] __memcpy+0x12/0x20
 RSP: 0018:ffffc9000174f9a8  EFLAGS: 00010246
 RAX: ffffc9000174fab8 RBX: 0000000000000000 RCX: 000000001fffff56
 RDX: 0000000000000000 RSI: ffff8803231f5a08 RDI: ffffc90001750000
 RBP: ffffc9000174fa88 R08: ffffc9000174fab0 R09: ffff8803231f54b8
 R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000000
 R13: 0000000000000000 R14: 0000000000000003 R15: ffff8803231f54a0
 FS:  00007f3a611af640(0000) GS:ffff88033ed00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffc90001750000 CR3: 0000000325b20000 CR4: 00000000000406e0
 Stack:
  ffffffffa00bc60d 0000000000000008 ffffc90000000001 ffffc9000174faac
  0000000000000292 ffffffffa00c24e4 ffffffffa00c2914 0000000000000000
  0000000000000000 ffffffff00000003 ffff880331ae8ad0 0000000800000246
 Call Trace:
  [<ffffffffa00bc60d>] ? acpi_nfit_ctl+0x49d/0x750 [nfit]
  [<ffffffffa01f4fe0>] nfit_test_probe+0x670/0xb1b [nfit_test]

Cc: <stable@vger.kernel.org>
Fixes: 747ffe11 ("libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing")
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

ACPI DSMs can have an 'extended' status which can be non-zero to convey
additional information about the command. In the xlat_status routine,
where we translate the command statuses, we were returning an error for
a non-zero extended status, even if the primary status indicated success.

Return from each command's 'case' once we have verified both its status
and extend status are good.

Cc: <stable@vger.kernel.org>
Fixes: 11294d63 ("nfit: fail DSMs that return non-zero status by default")
Signed-off-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Before we add more libnvdimm-private fields to nd_mapping make it clear
which parameters are input vs libnvdimm internals. Use struct
nd_mapping_desc instead of struct nd_mapping in nd_region_desc and make
struct nd_mapping private to libnvdimm.
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Starting a full Address Range Scrub (ARS) on hitting a memory error
machine check exception may not always be desirable. Provide a way
through sysfs to toggle the behavior between just adding the address
(cache line) where the MCE happened to the poison list and doing a full
scrub. The former (selective insertion of the address) is done
unconditionally.

Cc: linux-acpi@vger.kernel.org
Cc: Linda Knippers <linda.knippers@hpe.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

For the DSMs where the kernel knows the format of the output buffer and
originates those DSMs from within the kernel, return -EIO for any
non-zero status.  If the BIOS is indicating a status that we do not know
how to handle, fail the DSM.

Cc: <stable@vger.kernel.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

The check for a 'pmem' type SPA in the MCE handler was inverted due to a
merge/rebase error.

Fixes: 6839a6d9 nfit: do an ARS scrub on hitting a latent media error
Cc: linux-acpi@vger.kernel.org
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Trigger an nmemX/nfit/flags attribute to fire an event whenever a
smart-threshold DSM is received.
Reviewed-by: NVishal Verma <vishal.l.verma@intel.com>
Acked-by: NRafael J. Wysocki <rafael@kernel.org>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Per "ACPI 6.1 Section 9.20.3" NVDIMM devices, children of the ACPI0012
NVDIMM Root device, can receive health event notifications.

Given that these devices are precluded from registering a notification
handler via acpi_driver.acpi_device_ops (due to no _HID), we use
acpi_install_notify_handler() directly.  The registered handler,
acpi_nvdimm_notify(), triggers a poll(2) event on the nmemX/nfit/flags
sysfs attribute when a health event notification is received.

Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: NToshi Kani <toshi.kani@hpe.com>
Reviewed-by: NVishal Verma <vishal.l.verma@intel.com>
Acked-by: NRafael J. Wysocki <rafael@kernel.org>
Reviewed-by: NToshi Kani <toshi.kani@hpe.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>