Fix the the runtime suspend power management not working issue when system
starts up and before user touches the trackpad device.
TEST=test on Chromebook.
Signed-off-by: NDudley Du <dudl@cypress.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Gen5 and Gen6 trackpad devices are able to detect and report object
proximity data/events, add this function support in the cyapa driver
through the ABS_DISTANCE event.
Signed-off-by: NDudley Du <dudl@cypress.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Based on the cyapa core, add support for basic functionality of the gen6
trackpad devices. The driver can automatically determine what protocol
(gen3, gen5, or gen6) should be used with the attached trackpad device.
Signed-off-by: NDudley Du <dudl@cypress.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Change 'gen5' to 'pip' for all macros, variables and functions that are
shared between gen5 and gen6 modules to make naming more clear and
readable.

Also fix a few spelling errors.
Signed-off-by: NDudley Du <dudl@cypress.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Let's switch the driver to use managed resources, this will simplify
error handling and driver unbinding logic.
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Acked-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Wakeup property of device is not Linux-specific, it describes intended
system behavior regardless of the OS being used. Therefore let's drop
"linux," prefix, and, while at it, use the same name as I2C bus does:
"wakeup-source".

We keep parsing old name to keep compatibility with old DTSes.

Cc: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

On pm8xxx PMICs, shutdown and restart are signaled to the PMIC via a pin
called PS_HOLD. When this pin goes low, the PMIC performs a configurable
power sequence. Add a .shutdown hook so that we can properly configure this
power sequence for shutdown or restart depending on the system state.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

ELAN0600 seems to work just fine in mouse emulation mode through i2c-hid,
but to have full raw touch support we need to register it in elan_i2c.ko
Reported-and-tested-by: NAlessio Treglia <alessio@debian.org>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 2d538095 ("Input: zforce_ts - convert to use the gpiod
interface") converted this driver to use the gpiod functions. These
functions take the active low property into account, so we don't have
to invert the result of gpiod_get_value_cansleep(). This has been
missed in that commit. Fix it.
Signed-off-by: NDirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Switch to my kernel.org alias instead of a badly named gmail address,
which I rarely use.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some modules call config_item_init_type_name() and config_group_init_type_name()
with parameter "name" directly controlled by userspace.  These two
functions call config_item_set_name() with this name used as a format
string, which can be used to leak information such as content of the
stack to userspace.

For example, make_netconsole_target() in netconsole module calls
config_item_init_type_name() with the name of a newly-created directory.
This means that the following commands give some unexpected output, with
configfs mounted in /sys/kernel/config/ and on a system with a
configured eth0 ethernet interface:

    # modprobe netconsole
    # mkdir /sys/kernel/config/netconsole/target_%lx
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # echo 1 > /sys/kernel/config/netconsole/target_%lx/enabled
    # echo eth0 > /sys/kernel/config/netconsole/target_%lx/dev_name
    # dmesg |tail -n1
    [  142.697668] netconsole: target (target_ffffffffc0ae8080) is
    enabled, disable to update parameters

The directory name is correct but %lx has been interpreted in the
internal item name, displayed here in the error message used by
store_dev_name() in drivers/net/netconsole.c.

To fix this, update every caller of config_item_set_name to use "%s"
when operating on untrusted input.

This issue was found using -Wformat-security gcc flag, once a __printf
attribute has been added to config_item_set_name().
Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NFelipe Balbi <balbi@ti.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the 'flags' variable in order to fix the following warning:

drivers/rtc/rtc-armada38x.c:91:22: warning: unused variable 'flags' [-Wunused-variable]
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

rtc_sysfs_add_device checks if device can wakeup before creating the
wakealarm file in sysfs. Thus the driver must set wakeup capability
before registering the rtc device.
Signed-off-by: NWei-Ning Huang <wnhuang@google.com>
Acked-by: NEddie Huang <eddie.huang@mediatek.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The GICv3 ITS architecture allows a given [DevID, EventID] pair to be
translated to a [LPI, Collection] pair, where DevID is the device writing
the MSI, EventID is the payload being written, LPI is the actual
interrupt number, and Collection is roughly equivalent to a target CPU.

Each LPI can be mapped to a separate collection, but the ITS driver
insists on maintaining the collection on a device basis, instead of doing
it on a per interrupt basis.

This is obviously flawed, and this patch fixes it by adding a per interrupt
index that indicates which collection number is in use.
Reported-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org	# 4.1, 4.0
Link: http://lkml.kernel.org/r/1437126402-11677-1-git-send-email-marc.zyngier@arm.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Calls to set_memory_wb() incure heavy TLB flush and IPI cost. To
minimize those wait until pool grow beyond batch size before
draining the pool.
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: NMichel Dänzer <michel@daenzer.net>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Current code never allowed the page pool to actualy fill in anyway.
This fix it, so that we only start freeing page from the pool when
we go over the pool size.

Changed since v1:
  - Move the page batching optimization to its separate patch.

Changed since v2:
  - Do not remove code part of the batching optimization with
    this patch.
  - Better commit message.
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-and-Tested-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If no work was performed then prealloc_data_structs() wasn't ever called
so there isn't any need to call prealloc_free_structs().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Refactor writeback_some_dirty_blocks() to avoid prealloc_data_structs()
if the policy doesn't have any dirty blocks ready for writeback.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

All methods that queue work call wake_worker() as you'd expect.
E.g. cell_defer, defer_bio, quiesce_migration (which is called by
writeback, promote, demote_then_promote, invalidate, discard, etc).
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

The legacy system PM support has long time ago been dropped from the
AMBA bus. Align to that by converting to the modern system PM
callbacks.

Fixes: 26825cfd (ARM: 7914/1: amba: Drop legacy PM support ...)
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

A big problem with the current i8042 debugging option is that it outputs
data going to and from the keyboard by default. As a result, many dmesg
logs uploaded by users will unintentionally contain sensitive information
such as their password, as such it's probably a good idea not to output
data coming from the keyboard unless specifically enabled by the user.
Signed-off-by: NStephen Chandler Paul <cpaul@redhat.com>
Reviewed-by: NAndreas Mohr <andim2@users.sf.net>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK
register while the CRTC is off, which caused e.g. glxgears or
gnome-shell to hang after a modeset.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

This has been a source of confusion.  Make it debug only.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

So the selected forced level shows up properly in sysfs.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is necessary to properly reset the min/max limits before
clamping them otherwise we may get improper clamping depending
on what what was the last forced level.
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Always respect the harvest configuration as is.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

v2: squash in later fix
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If we run into a part with a harvest configuration where the entire
IP block is unusable, just disable the IP block.

v2: fix logic as noted by Christian
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Just to make sure userspace don't send nonsense to the kernel.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>

Port of amdgpu patch 9298e52f.
Signed-off-by: NChristian König <christian.koenig@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This can be the case when the GPU is powered off, e.g. via vgaswitcheroo
or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin
flushes the TLB after setting rdev->gart.ptr to non-NULL.

Fixes panic on powering off R7xx GPUs.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org