The cx18_stream struct contained a struct cx18_dvb for
every stream object, most of which were for analog capture.
Now we only allocate the cx18_dvb object for the DTV TS stream.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The error messages these drivers emitted for ioremap() failures
were misleading and not helpful for users.  Reworded those messages
to help the user take action to resolve vmalloc address space
exhaustion.
Signed-off-by: NAndy Walls <awalls@md.metrocast.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

While the V4L1 compatibility module has been removed, we still have
two V4L1 drivers that prevent full V4L1 removal.

Those drivers have been moved to staging and will be removed in 2.6.39,
together with the last V4L1 support.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Nobody stepped in to convert these drivers to V4L2, so they are now
removed from the kernel.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The se401 driver is deprecated and is moved to staging. If no one will
convert this driver to V4L2, then it will be removed in 2.6.39.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Move usbvideo to staging and mark it deprecated.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove ibmcam, konicawc and ultracam drivers. There are replaced by
gspca drivers.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

All the functionality is now handled through V4L2.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Tested-by: Njim smyth <jsmyth1969@gmail.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Also, in ov534, don't check the parm type.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When an error is set for an isochronous packet, the length of the packet
may be null. In this case, the error was not detected and the image
was not discarded as it should be.
Reported-by: NFranck Bourdonnec <fbourdonnec@chez.com>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These are OmniVision's OV7660 and OV9630.
Don't register the webcam when they are found.
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds the Vendor:Product number of the Lego Bionicle camera to
the existing gspca/sq905c.c and also a line for the camera in gspca.txt.
The camera works "out of the box" with these small changes. So this is
just in time for Christmas. Think of the children.
Signed-off-by: NTheodore Kilgore <kilgota@auburn.edu>
Signed-off-by: NJean-François Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove BKL ioctl and use unlocked_ioctl with core-assisted locking instead.
Signed-off-by: NPete Eberlein <pete@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove usage of BKL by usign per-device mutex.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is a copy and paste error.  It should be using sizeof(cap->driver)
instead of sizeof(cap->card).
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: Richard Rojförs <richard.rojfors@pelagicore.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi,

release_firmware() just does nothing if passed a NULL pointer. So there's
no reason to test before the call in
saa7164-fw.c::saa7164_downloadfirmware().

Removing the pointless conditional also saves a few bytes.
before:
   text    data     bss     dec     hex filename
   7943     112    2144   10199    27d7 drivers/media/video/saa7164/saa7164-fw.o
after:
   text    data     bss     dec     hex filename
   7931     112    2136   10179    27c3 drivers/media/video/saa7164/saa7164-fw.o
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Adds USB PIDs for the Elgato EyeTV Sat device.
This device is a clone of the Terratec S7.
Signed-off-by: NSam Doshi <sam@metal-fish.co.uk>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Streaming using mmap didn't work in the VIU driver. We need to
start/stop DMA in streamon/streamoff and free the buffers on
release. Add appropriate driver extension now.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

zr->frame_num is a counter and && was intended here instead of &.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

On Fri, 2010-12-03 at 09:32 -0200, Mauro Carvalho Chehab wrote:
> Em 27-11-2010 11:13, Malcolm Priestley escreveu:
> > Driver Version v1.73 - Frontend attach change.
> > To stop double rc registration in multi tuner environment or firmware change.
> >
> > Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
> >
> >
> > +static int lme_name(struct dvb_usb_adapter *adap)
> > +{
> > +	struct lme2510_state *st = adap->dev->priv;
> > +	const char *desc = adap->dev->desc->name;
> > +	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
> > +	char *name = adap->fe->ops.info.name;
> > +
> > +	strcpy(name, desc);
> > +	strcat(name, fe_name[st->tuner_config]);
>
> Please use, instead, strlcpy/strlcat, to avoid writing outside the buffer size.
>

Driver Version v1.74
Amended patch with change to strlcpy/strlcat.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix em28xx build by adding hardirq.h header file:

drivers/media/video/em28xx/em28xx-vbi.c:49: error: implicit declaration of function 'in_interrupt'
Reported-by: NZimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

'n' may be bigger than MAX_INT*sizeof(int), if so checking of truncated
(int)(n/sizeof(int)) for LIRCBUF_SIZE overflow and then using nontruncated 'count'
doesn't make sense.  Also n may be up to sizeof(int)-1 bytes bigger than expected,
so check value of (n % sizeof(int)) too.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Acked-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This module implements V4L2 controls for the Texas Instruments
WL1273 FM Radio and handles the communication with the chip.
Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This is the core of the WL1273 FM radio driver, it connects
the two child modules. The two child drivers are
drivers/media/radio/radio-wl1273.c and sound/soc/codecs/wl1273.c.

The radio-wl1273 driver implements the V4L2 interface and communicates
with the device. The ALSA codec offers digital audio, without it only
analog audio is available.
Signed-off-by: NMatti J. Aaltonen <matti.j.aaltonen@nokia.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for cameras with the HV7131D sensor, such as the 0c45:602a
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Our old start of frame detection code wrongly assumes that the sof
marker always lives at the beginning of the frame. At least for the
0c45:602a camera this is not the case. This patch also improves
the framerate from 28 fps to 30 fps with the 0c45:6005 and 0c45:6007
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I've a 0c45:6007 camera and it works fine with the gspca_sonixb driver,
so make that handle it instead of the deprecated sn9c102 driver.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

At Pixelview SBTVD Hybrid, the bits sent by the IR are inverted. Due to that,
the existing keytables produce wrong codes.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This fixes the following error in PowerPC builds:

drivers/media/video/timblogiw.c: In function 'timblogiw_probe':
drivers/media/video/timblogiw.c:749: error: timblogiw_ioctl_ops causes a section type conflict
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for mt9m001 (mi1300) is broken:
	- Table is incomplete;
	- Only one resolution is currently supported by the driver;
	- Resolution is incomplete;
	- it complains about broken JPEG headers.

Use the same init found on em28xx driver, and properly report the
output format as 8-bits GRAY.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>