- 14 2月, 2014 6 次提交
-
-
由 Kalle Valo 提交于
I modified Michal's commit c930f744 ("ath10k: implement channel switching") to return when vdev_start() fails, but forgot to release conf_mutex. Found by coccinelle: >> drivers/net/wireless/ath/ath10k/mac.c:2745:5-11: preceding lock on line 2663 Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Fixes a checkpatch warning in ath10k: drivers/net/wireless/ath/ath10k/mac.c:1636: WARNING: Avoid CamelCase: <regpair->regDmnEnum> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
Fix a checkpatch warning: drivers/net/wireless/ath/ath10k/debug.h:95: CHECK: Alignment should match open parenthesis Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Alexander Gordeev 提交于
As result deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Alexander Gordeev 提交于
In case IRQ configuration is unknown possibly enabled MSIs are left enabled in ath10k_pci_deinit_irq(). This update fixes the described misbehaviour. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Alexander Gordeev 提交于
The documentation states that pci_enable_msi_block() returns the number of requests 'could have been allocated', not 'could allocate'. IOW, MSIs are *not* enabled if a positive value returned. kvalo: add commit log based on Alexander's email Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 13 2月, 2014 10 次提交
-
-
由 Janusz Dziedzic 提交于
Pass frames with invalid peer status to upper layer. Next mac80211 will validate frames and drop if required. This is required to detect spurious frames and pass this info to user mode (detect CLASS2 CLASS3 frames from nonauthenticated/nonassociated stations). Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Bartosz Markowski 提交于
This is a workaround for HT-enabled STAs which break the spec and have no HT capabilities RX mask (no HT RX MCS map). As per spec, in section 20.3.5 Modulation and coding scheme (MCS), MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. Firmware asserts if such situation occurs. Signed-off-by: NBartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Marek Puzyniak 提交于
In case of warm reset target need to be suspended. Suspend function is extented to handle both cases with disabling interrupts and without disabling interrupts. Warm target reset requires suspend with all interrupts disabled. This patch depends on ath10k: fix device initialization routine Signed-off-by: NMarek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Marek Puzyniak 提交于
Suspend/resume callbacks are not protected by configuration mutex so adding such protection. Also in order to simplify implemetation of suspend function wait queue is replaced by completion. Signed-off-by: NMarek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Michal Kazior 提交于
Hardware CUS232 version 2 has some issues with cold reset that lead to Data Bus Errors or system hangs in some cases. It's safer to use warm reset when possible as it shouldn't trigger the aforementioned issues. Prefer warm reset over cold reset. However since warm reset doesn't work after FW crash make sure to fallback to cold reset when booting up the HW. Signed-off-by: NMichal Kazior <michal.kazior@tieto.com> Signed-off-by: NMarek Puzyniak <marek.puzyniak@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Marek Kwaczynski 提交于
It was found during testing the nss calculation does not cover all corner cases. Station could request eq. only MCS8 and MCS9 (nss=2 specific). Next num_rates=2 so the driver sets nss=(max((2+7)/8, 1))=1. Which is wrong. The in-driver calculation was introduced prior (commit ddcc347b mac80211: fix rx_nss calculation for drivers with hw rc). Since it's fixed, use mac80211 provided value from now. End user will experience lower throuhputs than expected if the nss is wrongly calculated. Signed-off-by: NMarek Kwaczynski <marek.kwaczynski@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Bartosz Markowski 提交于
This throw a lot of pointless warnings in case of DFS (radar detection) and PHYERR events from firmware, when firmware may actually insert more data, than we assume. Besides of being noisy this debug does not protect or check anything usefull currently. It was introduced long time ago while debugging aggregations. So just removing it. Signed-off-by: NBartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Ben Greear 提交于
Make it easier to grep for htt rx errors. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Ben Greear 提交于
Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Ben Greear 提交于
Show message length and expected length. Helps debug firmware mismatch issues. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
- 05 2月, 2014 2 次提交
-
-
由 Ben Greear 提交于
Aids in understanding excactly what a firmware is offering. Signed-off-by: NBen Greear <greearb@candelatech.com> Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
-
由 Kalle Valo 提交于
-
- 03 2月, 2014 16 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: "The three major changes in this patchset is a implementation for flexible userspace memory maps, cache-flushing fixes (again), and a long-discussed ABI change to make EWOULDBLOCK the same value as EAGAIN. parisc has been the only platform where we had EWOULDBLOCK != EAGAIN to keep HP-UX compatibility. Since we will probably never implement full HP-UX support, we prefer to drop this compatibility to make it easier for us with Linux userspace programs which mostly never checked for both values. We don't expect major fall-outs because of this change, and if we face some, we will simply rebuild the necessary applications in the debian archives" * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: add flexible mmap memory layout support parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc parisc: convert uapi/asm/stat.h to use native types only parisc: wire up sched_setattr and sched_getattr parisc: fix cache-flushing parisc/sti_console: prefer Linux fonts over built-in ROM fonts
-
由 Mikulas Patocka 提交于
HPFS needs to load 4 consecutive 512-byte sectors when accessing the directory nodes or bitmaps. We can't switch to 2048-byte block size because files are allocated in the units of 512-byte sectors. Previously, the driver would allocate a 2048-byte area using kmalloc, copy the data from four buffers to this area and eventually copy them back if they were modified. In the current implementation of the buffer cache, buffers are allocated in the pagecache. That means that 4 consecutive 512-byte buffers are stored in consecutive areas in the kernel address space. So, we don't need to allocate extra memory and copy the content of the buffers there. This patch optimizes the code to avoid copying the buffers. It checks if the four buffers are stored in contiguous memory - if they are not, it falls back to allocating a 2048-byte area and copying data there. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Previously, hpfs scanned all bitmaps each time the user asked for free space using statfs. This patch changes it so that hpfs scans the bitmaps only once, remembes the free space and on next invocation of statfs it returns the value instantly. New versions of wine are hammering on the statfs syscall very heavily, making some games unplayable when they're stored on hpfs, with load times in minutes. This should be backported to the stable kernels because it fixes user-visible problem (excessive level load times in wine). Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Helge Deller 提交于
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Guy Martin 提交于
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be> Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
This commit: f8dae006: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Helge Deller 提交于
The built-in ROM fonts lack many necessary ASCII characters, which is why it makes sens to prefer the Linux fonts instead if they are available. This makes consoles on STI graphics cards which are not supported by the stifb driver (e.g. Visualize FXe) looks much nicer. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon kconfig fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux由 Linus Torvalds 提交于
Pull SLAB changes from Pekka Enberg: "Random bug fixes that have accumulated in my inbox over the past few months" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: Fix warning on make htmldocs caused by slab.c mm: slub: work around unneeded lockdep warning mm: sl[uo]b: fix misleading comments slub: Fix possible format string bug. slub: use lockdep_assert_held slub: Fix calculation of cpu slabs slab.h: remove duplicate kmalloc declaration and fix kernel-doc warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull turbostat updates from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: introduce -s to dump counters tools/power turbostat: remove unused command line option turbostat: Add option to report joules consumed per sample turbostat: run on HSX turbostat: Add a .gitignore to ignore the compiled turbostat binary turbostat: Clean up error handling; disambiguate error messages; use err and errx turbostat: Factor out common function to open file and exit on failure turbostat: Add a helper to parse a single int out of a file turbostat: Check return value of fscanf turbostat: Use GCC's CPUID functions to support PIC turbostat: Don't attempt to printf an off_t with %zx turbostat: Don't put unprocessed uapi headers in the include path
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
-
由 Jean Delvare 提交于
Similar to what was done for the lm75 driver. Add depends on THERMAL since that is what provides the register/unregister functions above, but only if THERMAL_OF was selected as this is an optional feature of the driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: NEduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Jean Delvare 提交于
Based on an earlier attempt by Randy Dunlap. Fix SENSORS_LM75 dependencies to eliminate build errors: drivers/built-in.o: In function `lm75_remove': lm75.c:(.text+0x12bd8c): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `lm75_probe': lm75.c:(.text+0x12c123): undefined reference to `thermal_zone_of_sensor_register' Add depends on THERMAL since that is what provides the register/unregister functions above, but only if THERMAL_OF was selected as this is an optional feature of the driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: NEduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
-
- 02 2月, 2014 6 次提交
-
-
由 Andy Shevchenko 提交于
The new option allows just run turbostat and get dump of counter values. It's useful when we have something more than one program to test. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Andy Shevchenko 提交于
The -s is not used, let's remove it, and update quick help accordingly. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull misc kbuild changes from Michal Marek: "The non-critical part of kbuild is small this time: - Three fixes for make deb-pkg - A new coccinelle check One of the deb-pkg fixes is a leftover from the last merge window, hence the merge commit" * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: deb-pkg: Fix building for MIPS big-endian or ARM OABI deb-pkg: Fix cross-building linux-headers package scripts: Coccinelle script for pm_runtime_* return checks with IS_ERR_VALUE deb-pkg: Inhibit initramfs builders if CONFIG_BLK_DEV_INITRD is not set
-
由 Pali Rohár 提交于
Both proc files are writeable and used for configuring cells. But there is missing correct mode flag for writeable files. Without this patch both proc files are read only. [ It turns out they aren't really read-only, since root can write to them even if the write bit isn't set due to CAP_DAC_OVERRIDE ] Signed-off-by: NPali Rohár <pali.rohar@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Heiko Carstens 提交于
With commit d8d14bd0 ("fs/compat: fix lookup_dcookie() parameter handling") I changed the type of the len parameter of the lookup_dcookie() syscall. However I missed that there was still a stale declaration in arch/tile/.. which now causes a compile error on tile: In file included from fs/dcookies.c:28:0: include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie' fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie' Simply remove the declaration in the tile architecture, which is only a leftover from before the different compat lookup_dcookie() versions have been merged. The correct declaration is now in include/linux/compat.h The build error was reported by Fenguang's build bot. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fixes from Steve French: "A set of cifs fixes (mostly for symlinks, and SMB2 xattrs) and cleanups" * 'for-linus' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix check for regular file in couldbe_mf_symlink() [CIFS] Fix SMB2 mounts so they don't try to set or get xattrs via cifs CIFS: Cleanup cifs open codepath CIFS: Remove extra indentation in cifs_sfu_type CIFS: Cleanup cifs_mknod CIFS: Cleanup CIFSSMBOpen cifs: Add support for follow_link on dfs shares under posix extensions cifs: move unix extension call to cifs_query_symlink() cifs: Re-order M-F Symlink code cifs: Add create MFSymlinks to protocol ops struct cifs: use protocol specific call for query_mf_symlink() cifs: Rename MF symlink function names cifs: Rename and cleanup open_query_close_cifs_symlink() cifs: Fix memory leak in cifs_hardlink()
-