* System call parameter and result access functions
* Add tracehook calls
* Split syscall_trace into two functions do_syscall_trace_enter and
  do_syscall_trace_exit
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

sys32_pause is a useless copy of the generic sys_pause.
(and it's certainly not there for old sparc32 binaries..)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add support for z10 HiperSockets multiwrite SBALs on output
queues. This is used on LPAR with EDDP enabled devices.
Signed-off-by: NKlaus-Dieter Wacker <kdwacker@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Replace the no longer working links and email address in the
documentation and in source code.
Signed-off-by: NMárton Németh <nm127@freemail.hu>
Signed-off-by: NDave Jones <davej@redhat.com>

Symbol name spaghetti which is too complicated to cleanup on this stage
of the release cycle breaks the build on BCM1480 platforms.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Stress-testing KVM's latest NMI support with kgdbts inside an SMP guest,
I came across spurious unhandled NMIs while running the singlestep test.
Looking closer at the code path each NMI takes when KGDB is enabled, I
noticed that kgdb_nmicallback is called twice per event: One time via
DIE_NMI_IPI notification, the second time on DIE_NMI. Removing the first
invocation cures the unhandled NMIs here.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>

There is a bug in the BIOSes of some HP boxes with AMD Turions which
connects IO-APIC pins with ACPI thermal trip points in such a way that
if the state of the IO-APIC is not as expected by the (buggy) BIOS, the
thermal trip points are set to insanely low values (usually all of them
become 16 degrees Celsius).  As a result, thermal throttling kicks in
and knock the system down to its shoes.

Unfortunately some of the recent IO-APIC changes made the bug show up.
To prevent this from happening, blacklist machines that are known to be
affected (nx6115 and 6715b in this particular case).

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=11516 listed as
a regression from 2.6.26.

On my box it was caused by:

commit 691874fa
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date:   Tue May 27 21:19:51 2008 +0100

    x86: I/O APIC: timer through 8259A second-chance
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

and the whole story is described in this (huge) thread:

    http://marc.info/?l=linux-kernel&m=121358440508410&w=4

Matthew Garrett told us about that happening on the nx6125:

    http://marc.info/?l=linux-kernel&m=121396307411930&w=4

and then Maciej analysed the breakage on the basis of a DSDT from the
nx6325:

    http://marc.info/?l=linux-kernel&m=121401068718826&w=4

As far as the Dmitry's and Jason's boxes are concerned, I recognized the
symptoms and asked them to verify that the blacklisting helped.

It appears that the buggy BIOS code has been copy-pasted to the entire
range of machines, for no good reason.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Tested-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: NJason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Because sync-r4k.c doesn't build.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The Swarm IDE driver uses a release method which is defined in the driver
itself thus potentially oopsable.  The simple fix would be to just leak
the device but this patch goes the full length and moves the entire
handling of the platform device in the platform code and retains only
the platform driver code in drivers/ide/mips/swarm.c.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
[bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig]
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

move init_memory_mapping() out of init_k8_gatt.

for: http://bugzilla.kernel.org/show_bug.cgi?id=11676
    2.6.27-rc2 to rc8, apgart fails, iommu=soft works, regression

This is needed because we need to map the GART aperture even
if the GATT is not initialized.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For the purpose of MTRR canonicalization, treat WRPROT as UNCACHEABLE.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The first 1M is don't care when it comes to the variables MTRRs.
Cover it as WB as a heuristic approximation; this is generally what we
want to minimize the number of registers.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Print out the correct type when the Write Protected (WP) type is seen.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Impact: segfault on build of a 32-bit relocatable kernel

When converting arch/x86/boot/compressed/relocs.c to support unlimited
sections, the computation of sym_strtab in walk_relocs() was done
incorrectly.  This causes a segfault for some people when building the
relocatable 32-bit kernel.

Pointed out by Anonymous <pageexec@freemail.hu>.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This fixes a regression that came with 934b2857
("[S390] nohz/sclp: disable timer on synchronous waits.").
If udelay() gets called from a disabled context it sets the clock comparator
to a value where it expects the next interrupt. When the interrupt happens
the clock comparator gets not reset and therefore the interrupt condition
doesn't get cleared. The result is an endless timer interrupt loop.

In addition this patch fixes also the following:

rcutorture reveals that our __udelay implementation is still buggy,
since it might schedule tasklets, but prevents their execution:

NOHZ: local_softirq_pending 42
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 142
NOHZ: local_softirq_pending 02

To fix this we make sure that only the clock comparator interrupt
is enabled when the enabled wait psw is loaded.
Also no code gets called anymore which might schedule tasklets.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Rework of SMTC support to make it work with the new clock event system,
allowing "tickless" operation, and to make it compatible with the use of
the "wait_irqoff" idle loop.  The new clocking scheme means that the
previously optional IPI instant replay mechanism is now required, and has
been made more robust.
Signed-off-by: NKevin D. Kissell <kevink@paralogos.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NKevin D. Kissell <kevink@paralogos.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NKevin D. Kissell <kevink@paralogos.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Though from a hardware perspective it would be sensible to use only a
32-bit unsigned int type Linux defines interrupt flags to be stored in
an unsigned long and nothing else.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

[patch] x86: Trivial printk fix in efi.c

The following line is lacking a space between "memdesc" and "doesn't".

  "Kernel-defined memdescdoesn't match the one from EFI!"

Fixed the printk by adding a space.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: Russ Anderson <rja@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

J.A. Magallón reported:

 >> Also, on a 64 bit box with 4Gb, it gives this:
 >>
 >> cicely:~# cat /proc/mtrr
 >> reg00: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
 >> reg01: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
 >> reg02: base=0x140000000 (5120MB), size= 512MB: write-back, count=1
 >> reg03: base=0x160000000 (5632MB), size= 256MB: write-back, count=1
 >> reg04: base=0x80000000 (2048MB), size=2048MB: uncachable, count=1

boundary handling has a problem ... fix it.
Reported-by: NJ.A. Magallón <jamagallon@ono.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Patch below cleans up formatting, with space for big bases and sizes (64 Gb).
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 00c5372d caused the MPC8544DS
board to hang at boot.  The MPC8544DS is unique in that it doesn't use
the PCI slots on the ULI (unlike the MPC8572DS or MPC8610HPCD).  So
the dummy read at the end of the address space causes us to hang.

We can detect the situation by comparing the bridge's BARs versus
the root complex.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Fix the IRQ handling on the MN10300 arch.

This patch makes a number of significant changes:

 (1) It separates the irq_chip definition for edge-triggered interrupts from
     the one for level-triggered interrupts.

     This is necessary because the MN10300 PIC latches the IRQ channel's
     interrupt request bit (GxICR_REQUEST), even after the device has ceased to
     assert its interrupt line and the interrupt channel has been disabled in
     the PIC.  So for level-triggered interrupts we need to clear this bit when
     we re-enable - which is achieved by setting GxICR_DETECT but not
     GxICR_REQUEST when writing to the register.

     Not doing this results in spurious interrupts occurring because calling
     mask_ack() at the start of handle_level_irq() is insufficient - it fails
     to clear the REQUEST latch because the device that caused the interrupt is
     still asserting its interrupt line at this point.

 (2) IRQ disablement [irq_chip::disable_irq()] shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (3) IRQ unmasking [irq_chip::unmask_irq()] also shouldn't clear the interrupt
     request flag for edge-triggered interrupts lest it lose an interrupt.

 (4) The end() operation is now left to the default (no-operation) as
     __do_IRQ() is compiled out.  This may affect misrouted_irq(), but
     according to Thomas Gleixner it's the correct thing to do.

 (5) handle_level_irq() is used for edge-triggered interrupts rather than
     handle_edge_irq() as the MN10300 PIC latches interrupt events even on
     masked IRQ channels, thus rendering IRQ_PENDING unnecessary.  It is
     sufficient to call mask_ack() at the start and unmask() at the end.

 (6) For level-triggered interrupts, ack() is now NULL as it's not used, and
     there is no effective ACK function on the PIC.  mask_ack() is now the
     same as mask() as the latch continues to latch, even when the channel is
     masked.

Further, the patch discards the disable() op implementation as its now the same
as the mask() op implementation, which is used instead.

It also discards the enable() op implementations as they're now the same as
the unmask() op implementations, which are used instead.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This option has been added in v2.6.26 as a default-disabled
feature and went through several revisions since then.

The feature fixes a wide range of MTRR setup problems that BIOSes
leave us with: slow system, slow Xorg, slow system when adding lots
of RAM, etc., so we want to enable it by default for v2.6.28.

See:

  [Bug 10508] Upgrade to 4GB of RAM messes up MTRRs
  http://bugzilla.kernel.org/show_bug.cgi?id=10508

and the test results in:

   http://lkml.org/lkml/2008/9/29/273

1. hpa
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x13c000000 (5056MB), size=  64MB: uncachable, count=1
reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg04: base=0xbf700000 (3063MB), size=   1MB: uncachable, count=1
reg05: base=0xbf800000 (3064MB), size=   8MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 128M        num_reg: 6      lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
range0: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
hole: 000000013c000000 - 0000000140000000
Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC

2. Dylan Taft
reg00: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1
reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg05: base=0xc7e00000 (3198MB), size=   2MB: uncachable, count=1
reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 4M  num_reg: 6      lose RAM: 0M
range0: 0000000000000000 - 00000000c8000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
hole: 00000000c7e00000 - 00000000c8000000
Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC
rangeX: 0000000100000000 - 0000000130000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB

3. Gabriel
reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0x128000000 (4736MB), size=  64MB: write-back, count=1
reg06: base=0xcf600000 (3318MB), size=   2MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 16M         num_reg: 7      lose RAM: 0M
range0: 0000000000000000 - 00000000d0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
hole: 00000000cf600000 - 00000000cf800000
Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC
rangeX: 0000000100000000 - 000000012c000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB
Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB

4. Mika Fischer
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1

will get
Found optimal setting for mtrr clean up
gran_size: 1M   chunk_size: 16M         num_reg: 5      lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
rangeX: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious.  It got introduced along with
another bug, already fixed, by 75b8bb3e

After investigating a JRE failure, I found this bug was introduced a long time
ago, and had already managed to survive another bugfix which occurred on the
same line.  The result is a total failure of the JRE due to LDT selectors not
working properly.
Signed-off-by: NZachary Amsden <zach@vmware.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NIngo Molnar <mingo@elte.hu>

After investigating a JRE failure, I found this bug was introduced a
long time ago, and had already managed to survive another bugfix which
occurred on the same line.  The result is a total failure of the JRE due
to LDT selectors not working properly.

This one took a long time to rear up because LDT usage is not very
common, but the bug is quite serious.  It got introduced along with
another bug, already fixed, by 75b8bb3eSigned-off-by: NZachary Amsden <zach@vmware.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Glauber de Oliveira Costa <gcosta@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The number of BIOSes that have an option to enable the IOMMU, or fix
anything about its configuration, is vanishingly small.  There's no good
reason to punish quiet boot for this.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Correct typo for 'enable_mtrr_cleanup' early boot param name.
Signed-off-by: NJ.A. Magallon <jamagallon@ono.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Export set_memory_ro() and set_memory_rw() calls for use by drivers that need
to have more debug information about who might be writing to memory space.
this was initially developed for use while debugging a memory corruption
problem with e1000e.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

one have gran < 1M

reg00: base=0xd8000000 (3456MB), size= 128MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 (   0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0xd7f80000 (3455MB), size= 512KB: uncachable, count=1

will get

Found optimal setting for mtrr clean up
gran_size: 512K         chunk_size: 2M  num_reg: 7      lose RAM: 0G
range0: 0000000000000000 - 00000000d8000000
Setting variable MTRR 0, base: 0GB, range: 2GB, type WB
Setting variable MTRR 1, base: 2GB, range: 1GB, type WB
Setting variable MTRR 2, base: 3GB, range: 256MB, type WB
Setting variable MTRR 3, base: 3328MB, range: 128MB, type WB
hole: 00000000d7f00000 - 00000000d7f80000
Setting variable MTRR 4, base: 3455MB, range: 512KB, type UC
rangeX: 0000000100000000 - 0000000128000000
Setting variable MTRR 5, base: 4GB, range: 512MB, type WB
Setting variable MTRR 6, base: 4608MB, range: 128MB, type WB

so start from 64k instead of 1M
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

make the print out right with size < 1M
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

I tracked down the shutdown regression to CPUs not dying
when being shut down during power-off. This turns out to
be due to the system_state being SYSTEM_POWER_OFF, which
this code doesn't take as a valid state for shutting off
CPUs in.

This has never made sense to me, but when I added hotplug
code to implement hibernate I only "made it work" and did
not question the need to check the system_state. Thomas
Gleixner helped me dig, but the only thing we found is
that it was added with the original commit that added CPU
hotplug support.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Acked-by: NJoel Schopp <jschopp@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The PCI bridge on the Holly board is incorrectly represented in the
device tree.  The current device tree node for the PCI bridge sits
under the tsi-bridge node.  That's not obviously wrong, but the PCI
bridge translates some PCI spaces into CPU address ranges which were
not translated by the "ranges" property in tsi-bridge node.

We used to get away with this problem because the PCI bridge discovery
code was also buggy, assuming incorrectly that PCI host bridge nodes
were always directly under the root bus and treating the translated
addresses as raw CPU addresses, rather than parent bus addresses.
This has since been fixed, thus breaking Holly.

This could be fixed by adding extra translations to the tsi-bridge
node, but this patch instead moves the Holly PCI bridge out of the
tsi-bridge node to the root bus.  This makes the tsi-bridge node
represent only the built-in IO devices in the bridge, with a
more-or-less contiguous address range.  This is the same convention
used on Freescale SoC chips, where the "soc" node represents only the
IMMR region, and the PCI and other bus bridges are separate nodes
under the root bus.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Delay exit to make sure we can actually get the optimal result in as
many cases as possible.
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Initial fix for making sure that we can access percpu variables
in all C code (commit: 10617bbe)
inadvertantly allocated the memory in the "percpu" section of
the vmlinux ELF executable.  This confused kexec/dump.
Signed-off-by: NTony Luck <tony.luck@intel.com>

Honour "quiet" boot parameter in early_printk() calls
Signed-off-by: NDiego Calleja <diegocg@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>