ipv6_add_addr_hash() can compute the hash value outside of
locked section and pass it to ipv6_chk_same_addr().
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_chk_same_addr() is only used by ipv6_add_addr_hash(),
so moving it avoids a forward declaration.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: bpf: stack support in offload

This series brings stack support for offload.

We use the LMEM (Local memory) register file as memory to store
the stack.  Since this is a register file we need to do appropriate
shifts on unaligned accesses.  Verifier's state tracking helps us
with that.

LMEM can't be accessed directly, so we add support for setting
pointer registers through which one can read/write LMEM.

This set does not support accessing the stack when the alignment
is not known.  This can be added later (most likely using the byte_align
instructions).  There is also a number of optimizations which have been
left out:
 - in more complex non aligned accesses, double shift and rotation
   can save us a cycle.  This, however, leads to code explosion
   since all access sizes have to be coded separately;
 - since setting LM pointers costs around 5 cycles, we should be
   tracking their values to make sure we don't move them when
   they're already set correctly for earlier access;
 - in case of 8 byte access aligned to 4 bytes and crossing
   32 byte boundary but not crossing a 64 byte boundary we don't
   have to increment the pointer, but this seems like a pretty
   rare case to justify the added complexity.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Loading 64bit constants require up to 4 load immediates, since
we can only load 16 bits at a time.  If the 32bit halves of
the 64bit constant are the same, however, we can save a cycle
by doing a register move instead of two loads of 16 bits.

Note that we don't optimize the normal ALU64 load because even
though it's a 64 bit load the upper half of the register is
a coming from sign extension so we can load it in one cycle
anyway.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If stack pointer has a different value on different paths
but the alignment to words (4B) remains the same, we can
set a new LMEM access pointer to the calculated value and
access whichever word it's pointing to.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To access beyond 64th byte of the stack we need to set a new
stack pointer register (LMEM is accessed indirectly through
those pointers).  Add a function for encoding local CSR access
instruction.  Use stack pointer number 3.

Note that stack pointer registers allow us to index into 32
bytes of LMEM (with shift operations i.e. when operands are
restricted).  This means if access is crossing 32 byte boundary
we must not use offsetting, we have to set the pointer to the
exact address and move it with post-increments.

We depend on the datapath placing the stack base address in
GPR A22 for our use.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As long as the verifier tells us the stack offset exactly we
can render the LMEM reads quite easily.  Simply make sure that
the offset is constant for a given instruction and add it to
the instruction's offset.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we are performing unaligned stack accesses in the 32-64B window
we have to do a read-modify-write cycle.  E.g. for reading 8 bytes
from address 17:

0:  tmp    = stack[16]
1:  gprLo  = tmp >> 8
2:  tmp    = stack[20]
3:  gprLo |= tmp << 24
4:  tmp    = stack[20]
5:  gprHi  = tmp >> 8
6:  tmp    = stack[24]
7:  gprHi |= tmp << 24

The load on line 4 is unnecessary, because tmp already contains data
from stack[20].

For write we can optimize both loads and writebacks away.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add simple stack read support, similar to write in every aspect,
but data flowing the other way.  Note that unlike write which can
be done in smaller than word quantities, if registers are loaded
with less-than-word of stack contents - the values have to be
zero extended.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stack is implemented by the LMEM register file.  Unaligned accesses
to LMEM are not allowed.  Accesses also have to be 4B wide.

To support stack we need to make sure offsets of pointers are known
at translation time (for now) and perform correct load/mask/shift
operations.

Since we can access first 64B of LMEM without much effort support
only stacks not bigger than 64B.  Following commits will extend
the possible sizes beyond that.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

nfp_bpf_check_ptr() mostly looks at the pointer register.
Add a temporary variable to shorten the code.

While at it make sure we print error messages if translation
fails to help users identify the problem (to be carried in
ext_ack in due course).
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The need to emitting a few nops will become more common soon
as we add stack and map support.  Add a helper.  This allows
for code to be shorter but also may be handy for marking the
nops with a "reason" to ease applying optimizations.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
tools: bpftool: Add JSON output to bpftool

Quentin says:

This series introduces support for JSON output to all bpftool commands. It
adds option parsing, and several options are created:

  * -j, --json     Switch to JSON output.
  * -p, --pretty   Switch to JSON and print it in a human-friendly fashion.
  * -h, --help     Print generic help message.
  * -V, --version  Print version number.

This code uses a "json_writer", which is a copy of the one written by
Stephen Hemminger in iproute2.
---
I don't know if there is an easy way to share the code for json_write
without copying the file, so I am very open to suggestions on this matter.
====================
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the documentation to provide help about JSON output generation,
and add an example in bpftool-prog manual page.

Also reintroduce an example that was left aside when the tool was moved
from GitHub to the kernel sources, in order to show how to mount the
bpffs file system (to pin programs) inside the bpftool-prog manual page.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the look-and-feel of the manual pages somewhat closer to other
manual pages, such as the ones from the utilities from iproute2, by
highlighting more keywords.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As all commands can now return JSON output (possibly just a "null"
value), output of `bpftool --json batch file FILE` should also be fully
JSON compliant.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Turn err() and info() macros into functions.

In order to avoid naming conflicts with variables in the code, rename
them as p_err() and p_info() respectively.

The behavior of these functions is similar to the one of the macros for
plain output. However, when JSON output is requested, these macros
return a JSON-formatted "error" object instead of printing a message to
stderr.

To handle error messages correctly with JSON, a modification was brought
to their behavior nonetheless: the functions now append a end-of-line
character at the end of the message. This way, we can remove end-of-line
characters at the end of the argument strings, and not have them in the
JSON output.

All error messages are formatted to hold in a single call to p_err(), in
order to produce a single JSON field.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

`bpftool batch file FILE` takes FILE as an argument and executes all the
bpftool commands it finds inside (or stops if an error occurs).

To obtain a consistent JSON output, create a root JSON array, then for
each command create a new object containing two fields: one with the
command arguments, the other with the output (which is the JSON object
that the command would have produced, if called on its own).
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on
`bpftool map { show | dump | lookup | getnext }` commands. Remaining
commands produce no output.

Some functions have been spit into plain-output and JSON versions in
order to remain readable.

Outputs for sample maps have been successfully tested against a JSON
validator.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new printing function to dump translated eBPF instructions as
JSON. As for plain output, opcodes are printed only on request (when
`opcodes` is provided on the command line).

The disassembled output is generated by the same code that is used by
the kernel verifier.

Example output:

    $ bpftool --json --pretty prog dump xlated id 1
    [{
            "disasm": "(bf) r6 = r1"
        },{
            "disasm": "(61) r7 = *(u32 *)(r6 +16)"
        },{
            "disasm": "(95) exit"
        }
    ]

    $ bpftool --json --pretty prog dump xlated id 1 opcodes
    [{
            "disasm": "(bf) r6 = r1",
            "opcodes": {
                "code": "0xbf",
                "src_reg": "0x1",
                "dst_reg": "0x6",
                "off": ["0x00","0x00"
                ],
                "imm": ["0x00","0x00","0x00","0x00"
                ]
            }
        },{
            "disasm": "(61) r7 = *(u32 *)(r6 +16)",
            "opcodes": {
                "code": "0x61",
                "src_reg": "0x6",
                "dst_reg": "0x7",
                "off": ["0x10","0x00"
                ],
                "imm": ["0x00","0x00","0x00","0x00"
                ]
            }
        },{
            "disasm": "(95) exit",
            "opcodes": {
                "code": "0x95",
                "src_reg": "0x0",
                "dst_reg": "0x0",
                "off": ["0x00","0x00"
                ],
                "imm": ["0x00","0x00","0x00","0x00"
                ]
            }
        }
    ]
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on `bpftool prog show *` commands.
A new printing function is created to be passed as an argument to the
disassembler.

Similarly to plain output, opcodes are printed on request.

Outputs from sample programs have been successfully tested against a
JSON validator.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reuse the json_writer API introduced in an earlier commit to make
bpftool able to generate JSON output on `bpftool prog show *` commands.

For readability, the code from show_prog() has been split into two
functions, one for plain output, one for JSON.

Outputs from sample programs have been successfully tested against a
JSON validator.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These two options can be used to ask for a JSON output (--j or -json),
and to make this JSON human-readable (-p or --pretty).

A json_writer object is created when JSON is required, and will be used
in follow-up commits to produce JSON output.

Note that --pretty implies --json.

Update for the manual pages and interactive help messages comes in a
later patch of the series.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an option parsing facility to bpftool, in prevision of future
options for demanding JSON output. Currently, two options are added:
--help and --version, that act the same as the respective commands
`help` and `version`.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In prevision of following commits, supposed to add JSON output to the
tool, two files are copied from the iproute2 repository (taken at commit
268a9eee985f): lib/json_writer.c and include/json_writer.h.
Signed-off-by: NQuentin Monnet <quentin.monnet@netronome.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Song Liu says:

====================
net: add a set of tracepoints to tcp stack

Changes from v1:

Fix build error (with ipv6 as ko) by adding EXPORT_TRACEPOINT_SYMBOL_GPL
for trace_tcp_send_reset.

These patches add the following tracepoints to tcp stack.

tcp_send_reset
tcp_receive_reset
tcp_destroy_sock
tcp_set_state

These tracepoints can be used to track TCP state changes. Such state
changes include but are not limited to: connection establish,
connection termination, tx and rx of RST, various retransmits.

Currently, we use the following kprobes to trace these events:

int kprobe__tcp_validate_incoming
int kprobe__tcp_send_active_reset
int kprobe__tcp_v4_send_reset
int kprobe__tcp_v6_send_reset
int kprobe__tcp_v4_destroy_sock
int kprobe__tcp_set_state
int kprobe__tcp_retransmit_skb

These tracepoints will help us simplify this work.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds tracepoint trace_tcp_set_state. Besides usual fields
(s/d ports, IP addresses), old and new state of the socket is also
printed with TP_printk, with __print_symbolic().
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds trace event trace_tcp_destroy_sock.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New tracepoint trace_tcp_receive_reset is added and called from
tcp_reset(). This tracepoint is define with a new class tcp_event_sk.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

New tracepoint trace_tcp_send_reset is added and called from
tcp_v4_send_reset(), tcp_v6_send_reset() and tcp_send_active_reset().
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some functions that we plan to add trace points require const sk
and/or skb. So we mark these fields as const in the tracepoint.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce event class tcp_event_sk_skb for tcp tracepoints that
have arguments sk and skb.

Existing tracepoint trace_tcp_retransmit_skb() falls into this class.
This patch rewrites the definition of trace_tcp_retransmit_skb() with
tcp_event_sk_skb.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lipeng says:

====================
net: hns3: bug fixes & code improvements

This patchset introduces various HNS3 bug fixes, optimizations and code
improvements.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The return value of hns3_clean_tx_ring means tx ring clean result.
Return true means clean complete and there is no more pakcet need
clean. Retrun false means there is packets need clean and napi need
poll again. The last return of hns3_clean_tx_ring is
"return !!budget" as budget will decrease when clean a buffer.

If there is no valid BD in TX ring, return 0 for hns3_clean_tx_ring
will cause napi poll again and never complete the napi poll. This
patch fixes the bug.

Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

HW will use packet length to write packets to buffer or read
packets from buffer. There is a redundant memset when alloc buffer,
the memset have no sense and will increase time-consuming.
This patch removes it.

Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interface hns3_ring_get_cfg only update TX ring queue_index,
but do not update RX ring queue_index. This patch fixes it.

Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch gets vf count by standard function pci_sriov_get_totalvfs,
instead of info from NIC HW.
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1# patch: 07d29954 net: hns3: add support for ETHTOOL_GRXFH.
2# patch: 5668abda net: hns3: add support for set_ringparam.

1# patch adds ae_algo->ops->get_rss_tuple to hns3_get_rxnfc
and 2# patch delete ae_algo->ops->get_tc_size
from hns3_get_rxnfc.This patch fix the ops check in hns3_get_rxnfc.
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If one buffer had been recieved to stack, driver will alloc a new buffer,
map the buffer to device and replace the old buffer. When map fail, should
only free the new alloced buffer, but not free all buffers in the ring.

Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When alloce new buffer to HW, should unmap the old buffer first.
This old code map the old buffer but not unmap the old buffer,
this patch fixes it.

Fixes: 76ad4f0e (net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC)
Signed-off-by: NLipeng <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>