- 07 3月, 2016 1 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 05 3月, 2016 1 次提交
-
-
由 Kuninori Morimoto 提交于
Renesas sound device has CTU (= Channel Transfer Unit), and sound card needs its support. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 10 1月, 2016 1 次提交
-
-
由 Michael Trimarchi 提交于
pcm1792a is compatible with pcm1795 and pcm1796 so it's better to have them under the common name pcm179x Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 23 12月, 2015 5 次提交
-
-
由 Bard Liao 提交于
Add required tables and the binding document for ACPI and OF matching. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NBard Liao <bardliao@realtek.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Adam Thomson 提交于
HW can provide 1.6V micbias level as well the existing levels already provided in the driver. This patch adds support for 1.6V to the DT binding. Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Adam Thomson 提交于
In AB silicon, the internal LDO is not supported so remove DT and driver references to this (digital voltage direct from 'VDD' supply) Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
This patch adds Multi channel support on Renesas R-Car sound. This patch is tested on Salvator-X board, but it can't use Multi channel, because supported format is different between codec chip and R-Car. Thus, it was tested on board which doesn't mount codec chip, with oscilloscope. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Caesar Wang 提交于
Add the description for rt5616 codec. Signed-off-by: NCaesar Wang <wxt@rock-chips.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 18 12月, 2015 4 次提交
-
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Mans Rullgard 提交于
This adds a binding for the Wolfson WM8974 mono audio codec. Signed-off-by: NMans Rullgard <mans@mansr.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Songjun Wu 提交于
DT binding documentation for this new ASoC driver. Signed-off-by: NSongjun Wu <songjun.wu@atmel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 13 12月, 2015 3 次提交
-
-
由 Hans de Goede 提交于
Add support for PA gpio pin for controlling an external amplifier as used on some Allwinner boards. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Pistachio Internal DAC Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Texas Instruments pcm3168a codec Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 10 12月, 2015 2 次提交
-
-
由 Songjun Wu 提交于
Set GCK's parent as audio clock. Signed-off-by: NSongjun Wu <songjun.wu@atmel.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Andrew F. Davis 提交于
Fix the incorrect interrupt documentation file path in binding docs. Signed-off-by: NAndrew F. Davis <afd@ti.com> Acked-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 30 11月, 2015 2 次提交
-
-
由 Simon Horman 提交于
Simply document new compat strings. There appears to be no need for a driver updates. Signed-off-by: NSimon Horman <horms+renesas@verge.net.au> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Adam Thomson 提交于
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 25 11月, 2015 3 次提交
-
-
由 Shengjiu Wang 提交于
ASRC need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to ASRC registers Signed-off-by: NShengjiu Wang <shengjiu.wang@freescale.com> Acked-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Shengjiu Wang 提交于
SPDIF need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to SPDIF registers. Signed-off-by: NShengjiu Wang <shengjiu.wang@freescale.com> Acked-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Shengjiu Wang 提交于
ESAI need to enable the spba clock, when sdma is using share peripheral script. In this case, there is two spba master port is used, if don't enable the clock, the spba bus will have arbitration issue, which may cause read/write wrong data from/to ESAI registers. Signed-off-by: NShengjiu Wang <shengjiu.wang@freescale.com> Acked-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 24 11月, 2015 1 次提交
-
-
由 Andrew F. Davis 提交于
Fix the incorrect interrupt documentation file path in binding docs. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
- 23 11月, 2015 2 次提交
-
-
由 ZhengShunQian 提交于
This patch add the binding document of inno-rk3036 audio codec driver. Signed-off-by: NZhengShunQian <zhengsq@rock-chips.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Songjun Wu 提交于
Set GCK's parent as audio clock. Signed-off-by: NSongjun Wu <songjun.wu@atmel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 11月, 2015 1 次提交
-
-
由 Kuninori Morimoto 提交于
a3af0c65("ASoC: ak4613: add single-end optional property for IN/OUT pins") added IN/OUT pin single-end optional property, but it used "ak4613" as vendor prefix. This patch fixup to asahi-kasei. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 18 11月, 2015 1 次提交
-
-
由 Bard Liao 提交于
This is the initial codec driver for rt5659. Signed-off-by: NBard Liao <bardliao@realtek.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 17 11月, 2015 1 次提交
-
-
由 Sugar Zhang 提交于
rockchip,playback-channels: max playback channels, 8 channels default. Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 16 11月, 2015 9 次提交
-
-
由 Kuninori Morimoto 提交于
ak4613 IN/OUT pin can be selected as differential/single-end. Default is differential, because it is register default settings. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Anatol Pomozov 提交于
According to the datasheet RESET is active low pin, i.e. system goes to reset state when pin signal is low. The previous implementeation was assuming the pin is configured as 'active high' in DTS. Changle the gpio handling code and DTS configuration to 'active low'. Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound driver can output Audio-clkout0/1/2/3, but these are optional properties for each board. Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Geert Uytterhoeven 提交于
The compatible value can be board-specific, not SoC-specific. Add curly braces to indicate that the board type is optional. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Imagination Technologies SPDIF ouput controller Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Imagination Technologies SPDIF input controller Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Imagination Technologies parallel output controller Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add binding document for Imagination Technologies I2S output controller Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Damien.Horsley 提交于
Add a binding document for Imagination Technologies I2S input controller Signed-off-by: NDamien.Horsley <Damien.Horsley@imgtec.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 11 11月, 2015 1 次提交
-
-
由 Raphael Poggi 提交于
Signed-off-by: NRaphaël Poggi <poggi.raph@gmail.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 23 10月, 2015 2 次提交
-
-
由 Sugar Zhang 提交于
rockchip,capture-channels: max capture channels, 2 channels default. Signed-off-by: NSugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Songjun Wu 提交于
DT binding documentation for this new ASoC driver. Signed-off-by: NSongjun Wu <songjun.wu@atmel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-