We need to add "clean-files" in Makfiles to clean up DT blobs, but we
often miss to do so.

Since there are no source files that end with .dtb or .dtb.S, so we
can clean-up those files from the top-level Makefile.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NRob Herring <robh@kernel.org>

Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a
video connector for MIPI-DSI/CSI and eDP adapter.

This dts is for usage with the RK3399-Q7 SoM Puma.
Signed-off-by: NKlaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD
Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral
devices interface for makers to integrate with sensors and devices.

The devicetree currently supports basic peripherals, with more to be
added later on.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Add support for the rk3399 excavator main board.
This board works in a combination with the sapphire SOM.

This board have been sold as the rk3399 evaluation board for commercial customers.
You can get more info from below link:
http://opensource.rock-chips.com/wiki_Excavator_sapphire_boardSigned-off-by: NJacob Chen <jacob-chen@iotwrt.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Firefly-rk3399 is a bord from T-Firefly, you can find detail about
it here:
http://en.t-firefly.com/en/firenow/Firefly_RK3399/

This patch add basic node for the board and make it able to bring
up.

Peripheral works:
- usb hub which connect to ehci controller;
- UART2 debug
- eMMC
- PCIe

Not work:
- USB 3.0 HOST, type-C port
- sdio, sd-card

Not test for other peripheral:
- HDMI
- Ethernet
- OPTICAL
- WiFi/BT
- MIPI CSI/DSI
- IR
- EDP/DP
Signed-off-by: NKever Yang <kever.yang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch add rk3328-evb.dts for RK3328 evaluation board.
Tested on RK3328 evb.
Signed-off-by: NLiang Chen <cl@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

Kevin is part of a family of boards called Gru. As best as possible, the
properties shared by the Gru family are placed in rk3399-gru.dtsi, while
Kevin-specific bits are in rk3399-gru-kevin.dts. This does not add full
support for the base Gru board.

Working and tested (to some extent):
 * EC support -- including keyboard, battery, PWM, and probably more
 * UART / console
 * Thermal
 * Touchscreen
 * Touchpad
 * Digitizer (regulator still WIP)
 * PCIe / Wifi
 * Bluetooth / Webcam
 * SD card
 * eMMC
 * USB2 on TypeC
   - This works much of the time, but USB3 devices may or may not detect
     properly. Waiting on proper extcon support for USB3 over TypeC.
   - Depends on XHCI/DWC3 fixes for ARM64 that still haven't landed
 * Backlight

Not working:
 * CPUFreq -- relies on special OVP support for our PWM regulator
   circuits
 * EC / extcon support -- and with it, USB3/TypeC/DP
 * DRM -- won't even build on ARM64, so all display, eDP, etc. is not
   enabled

Not tested:
 * Audio
Signed-off-by: NBrian Norris <briannorris@chromium.org>
[shared gru/kevin parts on a gru device]
Tested-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
[with a bit of reordering]
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

PX5 EVB is designed by Rockchip for automotive field
with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS
HDMI video input/output interface, audio codec ES8396,
WIFI/BT (on RTL8723BS), Gsensor BMA250E and light&proximity
sensor STK3410.
Signed-off-by: NAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch adds basic support for the Tronsmart orion r86 set-top-box.
Signed-off-by: NMatthias Brugger <mbrugger@suse.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This patch add rk3399-evb.dts for RK3399 evaluation board.
Tested on RK3399 evb.
Signed-off-by: NJianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

The GeekBox contains an MXM3 module with a Rockchip RK3368 SoC.
Some connectors are available directly on the module.

This adds initial support, namely serial, USB, GMAC, eMMC, IR and TSADC.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

This board is similar with the rk3288 evb board but the rk3368 top
board. There exist the act8846 as the pmic.

Moment, add the balight/thermal/emmc/usb.. stuff,
Let the board can happy work.
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>

In terms of peripherals the rk3368 is quite similar to the rk3288, which
makes it possible to have a lot basic components working in the first go.
More to follow once I tracked down all the tiny differences that still
exist in some parts.

With these dts files, the R88 board is able to boot from an attached
usb device and most likely from its emmc too, if the emmc uses a standard
partition table instead of Rockchip's own one - the emmc itself is
detected correctly.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Moving dts files to vendor subdirs.
Acked-by: NRob Herring <robh@kernel.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRobert Richter <rrichter@cavium.com>