- 21 2月, 2007 32 次提交
-
-
由 Christoph Lameter 提交于
highest_possible_node_id() is currently used to calculate the last possible node idso that the network subsystem can figure out how to size per node arrays. I think having the ability to determine the maximum amount of nodes in a system at runtime is useful but then we should name this entry correspondingly, it should return the number of node_ids, and the the value needs to be setup only once on bootup. The node_possible_map does not change after bootup. This patch introduces nr_node_ids and replaces the use of highest_possible_node_id(). nr_node_ids is calculated on bootup when the page allocators pagesets are initialized. [deweerdt@free.fr: fix oops] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
allnoconfig: mm/mincore.c: In function 'do_mincore': mm/mincore.c:122: warning: unused variable 'entry' Yet another entry in the why-macros-are-wrong encyclopedia. Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 KAMEZAWA Hiroyuki 提交于
bind_zonelist() can create zero-length zonelist if there is a memory-less-node. This patch checks the length of zonelist. If length is 0, returns -EINVAL. tested on ia64/NUMA with memory-less-node. Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NAndi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
Several people have reported failures in dynamic major device number handling due to the recent changes in there to avoid handing out the local/experimental majors. Rolf reports that this is due to a gcc-4.1.0 bug. The patch refactors that code a lot in an attempt to provoke the compiler into behaving. Cc: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andries Brouwer 提交于
Somehow we got the layout of the v3 superblock wrong, which causes crashes due to overindexing of the buffer_head array in statfs on large fielsystems. Cc: "Cedric Augonnet" <cedric.augonnet@gmail.com> Cc: "Daniel Aragones" <danarag@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
fs/xfs/linux-2.6/xfs_super.c:903: warning: 'noinline' attribute ignored Cc: David Chinner <dgc@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ralf Baechle 提交于
If one of clear_bit, change_bit or set_bit is defined as a do { } while (0) function usage of these functions in parenthesis like (foo_bit(23, &var)) while be expaned to something like (do { ... } while (0)}). resulting in a build error. This patch removes the useless parenthesis. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4165/1: S3C24XX: Select CONFIG_NO_IOPORT [ARM] Fix s3c2410 ALSA audio for typedef elimination [ARM] Fix ARM AACI ALSA driver [ARM] fix mach-at91 build breakage [ARM] Fix jornada720 build errors [ARM] Fix iop13xx build error [ARM] Fix build error caused by move of apm [ARM] 4223/1: ixdp2351 : Fix for a define error [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx [ARM] 4186/1: iop: remove cp6_enable/disable routines [ARM] 4185/2: entry: introduce get_irqnr_preamble and arch_ret_to_user
-
由 Russell King 提交于
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) natsemi: Support Aculab E1/T1 PMXc cPCI carrier cards natsemi: Add support for using MII port with no PHY skge: race with workq and RTNL Replace local random function with random32() s2io: RTNL and flush_scheduled_work deadlock 8139too: RTNL and flush_scheduled_work deadlock sis190: RTNL and flush_scheduled_work deadlock r8169: RTNL and flush_scheduled_work deadlock [PATCH] ieee80211softmac: Fix setting of initial transmit rates [PATCH] bcm43xx: OFDM fix for rev 1 cards [PATCH] bcm43xx: Fix for 4311 and 02/07/07 specification changes [PATCH] prism54: correct assignment of DOT1XENABLE in WE-19 codepaths [PATCH] zd1211rw: Readd zd_addr_t cast [PATCH] bcm43xx: Fix for oops on resume [PATCH] bcm43xx: Ignore ampdu status reports [PATCH] wavelan: Use ARRAY_SIZE macro when appropriate [PATCH] hostap: Use ARRAY_SIZE macro when appropriate [PATCH] misc-wireless: Use ARRAY_SIZE macro when appropriate [PATCH] ipw2100: Use ARRAY_SIZE macro when appropriate [PATCH] bcm43xx: Janitorial change - remove two unused variables ...
-
git://git.o-hand.com/linux-rpurdie-backlight由 Linus Torvalds 提交于
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Remove bogus SYSFS dependency backlight: simplify corgi_bl locking backlight: Separate backlight properties from backlight ops pointers backlight: Clean up pmac_backlight handling backlight: Improve backlight selection for fbdev drivers backlight: Rework backlight/fb interaction simplifying, lots backlight: Remove unneeded backlight update_status calls backlight: Remove uneeded update_status call from chipsfb.c backlight/fbcon: Add FB_EVENT_CONBLANK backlight: Fix Kconfig entries backlight: Remove uneeded nvidia set_power calls backlight: Convert semaphore -> mutex backlight: Fix external uses of backlight internal semaphore backlight: Minor code cleanups for hp680_bl.c backlight: Minor code cleanups for corgi_bl.c backlight: Remove excessive (un)likelys backlight: Remove unneeded owner field backlight: Fix error handling backlight: Add Frontpath ProGear HX1050+ driver backlight: Add maintainer entry
-
由 David Brownell 提交于
The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [NET] Eliminate user-selectable CONFIG_MV643XX_ETH_[012] [MIPS] Drop __init from init_8259A() [MIPS] Fix Kconfig typo bug [MIPS] Fix double signal on trap and break instruction [MIPS] sigset_32 has been made redundand by compat_sigset_t. [MIPS] emma2rh: Remove needless <asm/i8259.h> inclusion. [MIPS] Add MTD device support for Cobalt
-
由 Geert Uytterhoeven 提交于
tty_register_driver: Remove incorrect and superfluous cast (expected and passed types are both const char *) Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dale Farnsworth 提交于
Remove the use of CONFIG_MV643XX_ETH_[012] variables on most platforms. Instead, platform-specific code enables the ports supported by the hardware. After this patch, these config variables are only used in arch/ppc, so also move them from drivers/net/Kconfig to arch/ppc/Kconfig. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NJeff Garzik <jeff@garzik.org> Cc: Paul Mackerras <paulus@samba.org>
-
由 Atsushi Nemoto 提交于
init_8259A() is called from i8259A_resume() so should not be marked as __init. And add some tests for whether 8259A was already initialized or not. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Atsushi Nemoto 提交于
This commit broke gdb, since any BREAK or TRAP instruction cause SIGSEGV. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
This patch has added MTD device support for Cobalt. Moreover, removes old type FlashROM support. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ben Dooks 提交于
On S3C24XX architecture, select CONFIG_NO_IOPORT as we only have memory based IO. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jeff Garzik 提交于
Merge branch 'upstream-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
-
由 Mark Brown 提交于
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI bus with an oversized EEPROM using a direct MII<->MII connection with no PHY. This patch adds a new device table entry supporting these cards. Signed-Off-By: NMark Brown <broonie@sirena.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mark Brown 提交于
This patch provides code paths which allow the natsemi driver to use the external MII port on the chip but ignore any PHYs that may be attached to it. The link state will be left as it was when the driver started and can be configured via ethtool. Any PHYs that are present can be accessed via the MII ioctl()s. This is useful for systems where the device is connected without a PHY or where either information or actions outside the scope of the driver are required in order to use the PHYs. Signed-Off-By: NMark Brown <broonie@sirena.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Stephen Hemminger 提交于
If a workqueue function that needs RTNL is running when skge_down is called then a deadlock is possible. Fix by only clearing the timer, and handling the flush_scheduled_work on removal. This work queue is only ever used for the old fiber based boards. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Mantra: don't use flush_scheduled_work with RTNL held. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Your usual dont-flush_scheduled_work-with-RTNL-held stuff. It is a bit different here since the thread runs permanently or is only occasionally kicked for recovery depending on the hardware revision. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Francois Romieu 提交于
flush_scheduled_work() in net_device->close has a slight tendency to deadlock with tasks on the workqueue that hold RTNL. rtl8169_close/down simply need the recovery tasks to not meddle with the hardware while the device is going down. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 20 2月, 2007 8 次提交
-
-
由 Russell King 提交于
CC [M] sound/arm/aaci.o sound/arm/aaci.c:729: error: parse error before '*' token sound/arm/aaci.c:731: warning: function declaration isn't a prototype ... sound/arm/aaci.c:786: error: parse error before '*' token sound/arm/aaci.c:786: warning: function declaration isn't a prototype ... sound/arm/aaci.c:827: error: parse error before '*' token sound/arm/aaci.c:828: warning: function declaration isn't a prototype ... sound/arm/aaci.c:845: error: parse error before "aaci_capture_ops" sound/arm/aaci.c:845: warning: type defaults to `int' in declaration of `aaci_capture_ops' Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 David Brownell 提交于
The rename of the AT91 subtree from mach-at91rm9200 to mach-at91 (to accomodate at91sam926x processors) was incomplete. It needs this patch to be able to build again. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
kernel/built-in.o: In function `pm_suspend': utsname_sysctl.c:(.text+0x23008): multiple definition of `pm_suspend' arch/arm/mach-sa1100/built-in.o:arch/arm/mach-sa1100/sleep.S:(.text+0xf68): first defined here arm-linux-ld: Warning: size of symbol `pm_suspend' changed from 20 in arch/arm/mach-sa1100/built-in.o to 44 in kernel/built-in.o Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
CC arch/arm/mach-iop13xx/setup.o arch/arm/mach-iop13xx/setup.c: In function 'iq8134x_probe_flash_size': arch/arm/mach-iop13xx/setup.c:210: warning: implicit declaration of function 'ioremap' arch/arm/mach-iop13xx/setup.c:210: warning: initialization makes pointer from integer without a cast arch/arm/mach-iop13xx/setup.c:218: warning: implicit declaration of function 'writew' arch/arm/mach-iop13xx/setup.c:222: warning: implicit declaration of function 'readb' arch/arm/mach-iop13xx/setup.c:231: warning: implicit declaration of function 'iounmap' LD .tmp_vmlinux1 arch/arm/mach-iop13xx/built-in.o: In function `iop13xx_platform_init': iq81340mc.c:(.init.text+0x150): undefined reference to `ioremap' iq81340mc.c:(.init.text+0x21c): undefined reference to `writew' iq81340mc.c:(.init.text+0x24c): undefined reference to `writew' iq81340mc.c:(.init.text+0x254): undefined reference to `iounmap' iq81340mc.c:(.init.text+0x2c4): undefined reference to `readb' iq81340mc.c:(.init.text+0x2e8): undefined reference to `readb' Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
CC arch/arm/common/sharpsl_pm.o arch/arm/common/sharpsl_pm.c:30:31: error: asm/apm-emulation.h: No such file or directory ... Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
Remove a bogus SYSFS dependency from the backlight class Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Ozzy 提交于
Fix syntax error for a define in ixdp2351.h Signed-off-by: Nozzy <linux-ozzy@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Conflicts: include/asm-arm/arch-at91rm9200/entry-macro.S Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-