- 17 1月, 2012 5 次提交
-
-
由 Jesper Juhl 提交于
We may leak the 'fwd_skb' we skb_copy() in ieee80211_rx_h_mesh_fwding() if we take the 'else' branch in the 'if' statement just below. If we take that branch we'll end up returning from the function and since we've not assigned 'fwd_skb' to anything at that point, we leak it when the variable goes out of scope. The simple fix seems to be to just kfree_skb(fwd_skb); just before we return. That is what this patch does. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Felix Fietkau 提交于
Documentation states that the KeyMiss flag is only valid if RxFrameOK is unset, however empirical evidence has shown that this is false. When KeyMiss is set (and RxFrameOK is 1), the hardware passes a valid frame which has not been decrypted. The driver then falsely marks the frame as decrypted, and when using CCMP this corrupts the rx CCMP PN, leading to connection hangs. Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
This clears the currently mapped core when suspending, to force re-mapping after resume. Without that we were touching default core registers believing some other core is mapped. Such a behaviour resulted in lockups on some machines. Cc: stable@vger.kernel.org Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 1月, 2012 4 次提交
-
-
由 Johannes Berg 提交于
When userspace attempts to authorize a station that is already authorized, nothing happens as you'd expect. Similarly, when it unauthorizes a station that is associated, nothing happens. However, when it unauthorizes a station that isn't even associated yet, we erroneously try to move the station to associated. This seems to happen occasionally as a result of a race when wpa_supplicant attempts to unauthorize the port in managed mode. Particularly with my new patches to keep stations, it can then move a station into ASSOCIATED state before we have really associated, which is really confusing. I introduced this bug in "mac80211: refactor station state transitions" Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stanislaw Gruszka 提交于
Same devices can generate interrupt without properly setting bit in INT_SOURCE_CSR register (spurious interrupt), what will cause IRQ line will be disabled by interrupts controller driver. We discovered that clearing INT_MASK_CSR stops such behaviour. We previously first read that register, and then clear all know interrupt sources bits and do not touch reserved bits. After this patch, we write to all register content (I believe writing to reserved bits on that register will not cause any problems, I tested that on my rt2800pci device). This fix very bad performance problem, practically making device unusable (since worked without interrupts), reported in: https://bugzilla.redhat.com/show_bug.cgi?id=658451 We previously tried to workaround that issue in commit 4ba7d999 "rt2800pci: handle spurious interrupts", but it was reverted in commit 82e5fc2a as thing, that will prevent to detect real spurious interrupts. Reported-and-tested-by: NAmir Hedayaty <hedayaty@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NGertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Dan Carpenter 提交于
This is basically just a cleanup. Large positive numbers get counted as negative but then get implicitly cast to positive again for the checks that matter. This does make a small difference in ipw_handle_promiscuous_rx() when we test "if (unlikely((len + IPW_RX_FRAME_SIZE) > skb_tailroom(rxb->skb)))" It should return there, but we don't return until a couple lines later when we test "if (len > IPW_RX_BUF_SIZE - sizeof(struct ipw_rt_hdr)) {". The difference is that in the second test the sizeof() means that there is an implied cast to unsigned. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NStanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Guennadi Liakhovetski 提交于
An Oops has once been observed, when the SDIO card had been ejected during IO. The PC value shows, that the dev pointer in b43_op_stop() was NULL. (I moved the NULL check before the lock, based upon a suggestion from Julian Calaby <julian.calaby@gmail.com>. -- JWL) Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 13 1月, 2012 31 次提交
-
-
由 Linus Torvalds 提交于
Andrew explains: - various misc stuff - Most of the rest of MM: memcg, threaded hugepages, others. - cpumask - kexec - kdump - some direct-io performance tweaking - radix-tree optimisations - new selftests code A note on this: often people will develop a new userspace-visible feature and will develop userspace code to exercise/test that feature. Then they merge the patch and the selftest code dies. Sometimes we paste it into the changelog. Sometimes the code gets thrown into Documentation/(!). This saddens me. So this patch creates a bare-bones framework which will henceforth allow me to ask people to include their test apps in the kernel tree so we can keep them alive. Then when people enhance or fix the feature, I can ask them to update the test app too. The infrastruture is terribly trivial at present - let's see how it evolves. - checkpoint/restart feature work. A note on this: this is a project by various mad Russians to perform c/r mainly from userspace, with various oddball helper code added into the kernel where the need is demonstrated. So rather than some large central lump of code, what we have is little bits and pieces popping up in various places which either expose something new or which permit something which is normally kernel-private to be modified. The overall project is an ongoing thing. I've judged that the size and scope of the thing means that we're more likely to be successful with it if we integrate the support into mainline piecemeal rather than allowing it all to develop out-of-tree. However I'm less confident than the developers that it will all eventually work! So what I'm asking them to do is to wrap each piece of new code inside CONFIG_CHECKPOINT_RESTORE. So if it all eventually comes to tears and the project as a whole fails, it should be a simple matter to go through and delete all trace of it. This lot pretty much wraps up the -rc1 merge for me. * akpm: (96 commits) unlzo: fix input buffer free ramoops: update parameters only after successful init ramoops: fix use of rounddown_pow_of_two() c/r: prctl: add PR_SET_MM codes to set up mm_struct entries c/r: procfs: add start_data, end_data, start_brk members to /proc/$pid/stat v4 c/r: introduce CHECKPOINT_RESTORE symbol selftests: new x86 breakpoints selftest selftests: new very basic kernel selftests directory radix_tree: take radix_tree_path off stack radix_tree: remove radix_tree_indirect_to_ptr() dio: optimize cache misses in the submission path vfs: cache request_queue in struct block_device fs/direct-io.c: calculate fs_count correctly in get_more_blocks() drivers/parport/parport_pc.c: fix warnings panic: don't print redundant backtraces on oops sysctl: add the kernel.ns_last_pid control kdump: add udev events for memory online/offline include/linux/crash_dump.h needs elf.h kdump: fix crash_kexec()/smp_send_stop() race in panic() kdump: crashk_res init check for /sys/kernel/kexec_crash_size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) pptp: Accept packet with seq zero RDS: Remove some unused iWARP code net: fsl: fec: handle 10Mbps speed in RMII mode drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c: add missing iounmap drivers/net/ethernet/tundra/tsi108_eth.c: add missing iounmap ksz884x: fix mtu for VLAN net_sched: sfq: add optional RED on top of SFQ dp83640: Fix NOHZ local_softirq_pending 08 warning gianfar: Fix invalid TX frames returned on error queue when time stamping gianfar: Fix missing sock reference when processing TX time stamps phylib: introduce mdiobus_alloc_size() net: decrement memcg jump label when limit, not usage, is changed net: reintroduce missing rcu_assign_pointer() calls inet_diag: Rename inet_diag_req_compat into inet_diag_req inet_diag: Rename inet_diag_req into inet_diag_req_v2 bond_alb: don't disable softirq under bond_alb_xmit mac80211: fix rx->key NULL pointer dereference in promiscuous mode nl80211: fix old station flags compatibility mdio-octeon: use an unique MDIO bus name. mdio-gpio: use an unique MDIO bus name. ...
-
由 Sascha Hauer 提交于
unlzo modifies the pointer to in_buf, so we have to free the original buffer, not the modified pointer. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Cc: Lasse Collin <lasse.collin@tukaani.org> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kees Cook 提交于
If a platform device exists on the system, but ramoops fails to attach to it, the module parameters are overridden before ramoops can fall back and try to use passed module parameters. Move update to end of init routine. Signed-off-by: NKees Cook <keescook@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Sergiu Iordache <sergiu@chromium.org> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Marco Stornelli 提交于
The return value of rounddown_pow_of_two wasn't evaluated, so the operation was a no-op. Signed-off-by: NMarco Stornelli <marco.stornelli@gmail.com> Reported-by: NAndrew Morton <akpm@linux-foundation.org> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
When we restore a task we need to set up text, data and data heap sizes from userspace to the values a task had at checkpoint time. This patch adds auxilary prctl codes for that. While most of them have a statistical nature (their values are involved into calculation of /proc/<pid>/statm output) the start_brk and brk values are used to compute an allowed size of program data segment expansion. Which means an arbitrary changes of this values might be dangerous operation. So to restrict access the following requirements applied to prctl calls: - The process has to have CAP_SYS_ADMIN capability granted. - For all opcodes except start_brk/brk members an appropriate VMA area must exist and should fit certain VMA flags, such as: - code segment must be executable but not writable; - data segment must not be executable. start_brk/brk values must not intersect with data segment and must not exceed RLIMIT_DATA resource limit. Still the main guard is CAP_SYS_ADMIN capability check. Note the kernel should be compiled with CONFIG_CHECKPOINT_RESTORE support otherwise these prctl calls will return -EINVAL. [akpm@linux-foundation.org: cache current->mm in a local, saving 200 bytes text] Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: NKees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
The mm->start_code/end_code, mm->start_data/end_data, mm->start_brk are involved into calculation of program text/data segment sizes (which might be seen in /proc/<pid>/statm) and into brk() call final address. For restore we need to know all these values. While mm->start_code/end_code already present in /proc/$pid/stat, the rest members are not, so this patch brings them in. The restore procedure of these members is addressed in another patch using prctl(). Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Acked-by: NSerge Hallyn <serge.hallyn@canonical.com> Reviewed-by: NKees Cook <keescook@chromium.org> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
For checkpoint/restore we need auxilary features being compiled into the kernel, such as additional prctl codes, /proc/<pid>/map_files and etc... but same time these features are not mandatory for a regular kernel so CHECKPOINT_RESTORE config symbol should bring a way to disable them all at once if one wish to get rid of additional functionality. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Reviewed-by: NKees Cook <keescook@chromium.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
Bring a first selftest in the relevant directory. This tests several combinations of breakpoints and watchpoints in x86, as well as icebp traps and int3 traps. Given the amount of breakpoint regressions we raised after we merged the generic breakpoint infrastructure, such selftest became necessary and can still serve today as a basis for new patches that touch the do_debug() path. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Frederic Weisbecker 提交于
Bring a new kernel selftests directory in tools/testing/selftests. To add a new selftest, create a subdirectory with the sources and a makefile that creates a target named "run_test" then add the subdirectory name to the TARGET var in tools/testing/selftests/Makefile and tools/testing/selftests/run_tests script. This can help centralizing and maintaining any useful selftest that developers usually tend to let rust in peace on some random server. Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Down, down in the deepest depths of GFP_NOIO page reclaim, we have shrink_page_list() calling __remove_mapping() calling __delete_from_ swap_cache() or __delete_from_page_cache(). You would not expect those to need much stack, but in fact they call radix_tree_delete(): which declares a 192-byte radix_tree_path array on its stack (to record the node,offsets it visits when descending, in case it needs to ascend to update them). And if any tag is still set [1], that calls radix_tree_tag_clear(), which declares a further such 192-byte radix_tree_path array on the stack. (At least we have interrupts disabled here, so won't then be pushing registers too.) That was probably a good choice when most users were 32-bit (array of half the size), and adding fields to radix_tree_node would have bloated it unnecessarily. But nowadays many are 64-bit, and each radix_tree_node contains a struct rcu_head, which is only used when freeing; whereas the radix_tree_path info is only used for updating the tree (deleting, clearing tags or setting tags if tagged) when a lock must be held, of no interest when accessing the tree locklessly. So add a parent pointer to the radix_tree_node, in union with the rcu_head, and remove all uses of the radix_tree_path. There would be space in that union to save the offset when descending as before (we can argue that a lock must already be held to exclude other users), but recalculating it when ascending is both easy (a constant shift and a constant mask) and uncommon, so it seems better just to do that. Two little optimizations: no need to decrement height when descending, adjusting shift is enough; and once radix_tree_tag_if_tagged() has set tag on a node and its ancestors, it need not ascend from that node again. perf on the radix tree test harness reports radix_tree_insert() as 2% slower (now having to set parent), but radix_tree_delete() 24% faster. Surely that's an exaggeration from rtth's artificially low map shift 3, but forcing it back to 6 still rates radix_tree_delete() 8% faster. [1] Can a pagecache tag (dirty, writeback or towrite) actually still be set at the time of radix_tree_delete()? Perhaps not if the filesystem is well-behaved. But although I've not tracked any stack overflow down to this cause, I have observed a curious case in which a dirty tag is set and left set on tmpfs: page migration's migrate_page_copy() happens to use __set_page_dirty_nobuffers() to set PageDirty on the newpage, and that sets PAGECACHE_TAG_DIRTY as a side-effect - harmless to a filesystem which doesn't use tags, except for this stack depth issue. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Nai Xia <nai.xia@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Xiao Guangrong 提交于
It is not used anymore, remove it Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: NHugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Some investigation of a transaction processing workload showed that a major consumer of cycles in __blockdev_direct_IO is the cache miss while accessing the block size. This is because it has to walk the chain from block_dev to gendisk to queue. The block size is needed early on to check alignment and sizes. It's only done if the check for the inode block size fails. But the costly block device state is unconditionally fetched. - Reorganize the code to only fetch block dev state when actually needed. Then do a prefetch on the block dev early on in the direct IO path. This is worth it, because there is substantial code run before we actually touch the block dev now. - I also added some unlikelies to make it clear the compiler that block device fetch code is not normally executed. This gave a small, but measurable improvement on a large database benchmark (about 0.3%) [akpm@linux-foundation.org: coding-style fixes] [sfr@canb.auug.org.au: using prefetch requires including prefetch.h] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
This makes it possible to get from the inode to the request_queue with one less cache miss. Used in followon optimization. The livetime of the pointer is the same as the gendisk. This assumes that the queue will always stay the same in the gendisk while it's visible to block_devices. I think that's safe correct? Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tao Ma 提交于
In get_more_blocks(), we use dio_count to calcuate fs_count and do some tricky things to increase fs_count if dio_count isn't aligned. But actually it still has some corner cases that can't be coverd. See the following example: dio_write foo -s 1024 -w 4096 (direct write 4096 bytes at offset 1024). The same goes if the offset isn't aligned to fs_blocksize. In this case, the old calculation counts fs_count to be 1, but actually we will write into 2 different blocks (if fs_blocksize=4096). The old code just works, since it will call get_block twice (and may have to allocate and create extents twice for filesystems like ext4). So we'd better call get_block just once with the proper fs_count. Signed-off-by: NTao Ma <boyu.mt@taobao.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
drivers/parport/parport_pc.c: In function '__check_irq': drivers/parport/parport_pc.c:3415: warning: return from incompatible pointer type drivers/parport/parport_pc.c: In function '__check_dma': drivers/parport/parport_pc.c:3417: warning: return from incompatible pointer type Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
When an oops causes a panic and panic prints another backtrace it's pretty common to have the original oops data be scrolled away on a 80x50 screen. The second backtrace is quite redundant and not needed anyways. So don't print the panic backtrace when oops_in_progress is true. [akpm@linux-foundation.org: add comment] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelyanov 提交于
The sysctl works on the current task's pid namespace, getting and setting its last_pid field. Writing is allowed for CAP_SYS_ADMIN-capable tasks thus making it possible to create a task with desired pid value. This ability is required badly for the checkpoint/restore in userspace. This approach suits all the parties for now. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NTejun Heo <tj@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
Currently no udev events for memory hotplug "online" and "offline" are generated: # udevadm monitor # echo offline > /sys/devices/system/memory/memory4/state ==> No event When kdump is loaded, kexec detects the current memory configuration and stores it in the pre-allocated ELF core header. Therefore, for kdump it is necessary to reload the kdump kernel with kexec when the memory configuration changes (e.g. for online/offline hotplug memory). In order to do this automatically, udev rules should be used. This kernel patch adds udev events for "online" and "offline". Together with this kernel patch, the following udev rules for online/offline have to be added to "/etc/udev/rules.d/98-kexec.rules": SUBSYSTEM=="memory", ACTION=="online", PROGRAM="/etc/init.d/kdump restart" SUBSYSTEM=="memory", ACTION=="offline", PROGRAM="/etc/init.d/kdump restart" [sfr@canb.auug.org.au: fixups for class to subsystem conversion] Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Fabio Estevam 提交于
Building an ARM target we get the following warnings: CC arch/arm/kernel/setup.o In file included from arch/arm/kernel/setup.c:39: arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined In file included from arch/arm/kernel/setup.c:24: include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition Quoting Russell King: "linux/crash_dump.h makes no attempt to include asm/elf.h, but it depends on stuff in asm/elf.h to determine how stuff inside this file is defined at parse time. So, if asm/elf.h is included after linux/crash_dump.h or not at all, you get a different result from the situation where asm/elf.h is included before." So add elf.h header to crash_dump.h to avoid this problem. The original discussion about this can be found at: http://www.spinics.net/lists/arm-kernel/msg154113.htmlSigned-off-by: NFabio Estevam <fabio.estevam@freescale.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@vger.kernel.org> [3.2.1] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
When two CPUs call panic at the same time there is a possible race condition that can stop kdump. The first CPU calls crash_kexec() and the second CPU calls smp_send_stop() in panic() before crash_kexec() finished on the first CPU. So the second CPU stops the first CPU and therefore kdump fails: 1st CPU: panic()->crash_kexec()->mutex_trylock(&kexec_mutex)-> do kdump 2nd CPU: panic()->crash_kexec()->kexec_mutex already held by 1st CPU ->smp_send_stop()-> stop 1st CPU (stop kdump) This patch fixes the problem by introducing a spinlock in panic that allows only one CPU to process crash_kexec() and the subsequent panic code. All other CPUs call the weak function panic_smp_self_stop() that stops the CPU itself. This function can be overloaded by architecture code. For example "tile" can use their lower-power "nap" instruction for that. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
Currently it is possible to set the crash_size via the sysfs /sys/kernel/kexec_crash_size even if no crash kernel memory has been defined with the "crashkernel" parameter. In this case "crashk_res" is not initialized and crashk_res.start = crashk_res.end = 0. Unfortunately resource_size(&crashk_res) returns 1 in this case. This breaks the s390 implementation of crash_(un)map_reserved_pages(). To fix the problem the correct "old_size" is now calculated in crash_shrink_memory(). "old_size is set to "0" if crashk_res is not initialized. With this change crash_shrink_memory() will do nothing, when "crashk_res" is not initialized. It will return "0" for "echo 0 > /sys/kernel/kexec_crash_size" and -EINVAL for "echo [not zero] > /sys/kernel/kexec_crash_size". In addition to that this patch also simplifies the "ret = -EINVAL" vs. "ret = 0" logic as suggested by Simon Horman. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: NDave Young <dyoung@redhat.com> Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael Holzheu 提交于
When shrinking crashkernel memory using /sys/kernel/kexec_crash_size for the newly added memory no RAM resource is created at the moment. Example: $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss c0000000-cfffffff : Crash kernel d0000000-ffffffff : System RAM $ echo 0 > /sys/kernel/kexec_crash_size $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss <<-- here is System RAM missing d0000000-ffffffff : System RAM One result of this bug is that the memory chunk can never be set offline using memory hotplug. With this patch I insert a new "System RAM" resource for the released memory. Then the upper example looks like the following: $ echo 0 > /sys/kernel/kexec_crash_size $ cat /proc/iomem 00000000-bfffffff : System RAM 00000000-005b7ac3 : Kernel code 005b7ac4-009743bf : Kernel data 009bb000-00a85c33 : Kernel bss c0000000-cfffffff : System RAM <<-- new rescoure d0000000-ffffffff : System RAM And now I can set chunk c0000000-cfffffff offline. Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
KMSG_DUMP_KEXEC is useless because we already save kernel messages inside /proc/vmcore, and it is unsafe to allow modules to do other stuffs in a crash dump scenario. [akpm@linux-foundation.org: fix powerpc build] Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com> Reported-by: NVivek Goyal <vgoyal@redhat.com> Acked-by: NVivek Goyal <vgoyal@redhat.com> Acked-by: NJarod Wilson <jarod@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Wanlong Gao 提交于
node_to_cpumask() has been replaced by cpumask_of_node(), and wholly removed since commit 29c337a0 ("cpumask: remove obsolete node_to_cpumask now everyone uses cpumask_of_node"). So update the comments for setup_node_to_cpumask_map(). Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kautuk Consul 提交于
If either of the vas or vms arrays are not properly kzalloced, then the code jumps to the err_free label. The err_free label runs a loop to check and free each of the array members of the vas and vms arrays which is not required for this situation as none of the array members have been allocated till this point. Eliminate the extra loop we have to go through by introducing a new label err_free2 and then jumping to it. [akpm@linux-foundation.org: remove now-unneeded tests] Signed-off-by: NKautuk Consul <consul.kautuk@gmail.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
There is sometimes confusion between the global putback_lru_pages() in migrate.c and the static putback_lru_pages() in vmscan.c: rename the latter putback_inactive_pages(): it helps shrink_inactive_list() rather as move_active_pages_to_lru() helps shrink_active_list(). Remove unused scan_control arg from putback_inactive_pages() and from update_isolated_counts(). Move clear_active_flags() inside update_isolated_counts(). Move NR_ISOLATED accounting up into shrink_inactive_list() itself, so the balance is clearer. Do the spin_lock_irq() before calling putback_inactive_pages() and spin_unlock_irq() after return from it, so that it better matches update_isolated_counts() and move_active_pages_to_lru(). Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
The isolate_pages() level in vmscan.c offers little but indirection: merge it into isolate_lru_pages() as the compiler does, and use the names nr_to_scan and nr_scanned in each case. Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
del_page_from_lru() repeats del_page_from_lru_list(), also working out which LRU the page was on, clearing the relevant bits. Decouple those functions: remove del_page_from_lru() and add page_off_lru(). Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Mostly we use "enum lru_list lru": change those few "l"s to "lru"s. Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
checkpatch rightly protests WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable so fix the five offenders in mm/swap.c. Signed-off-by: NHugh Dickins <hughd@google.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-