As SPI platform devices are consolidated to plat-samsung, some
corresponding changes are required in the respective machine folder.
Setup files are added for SPI GPIO configurations and platform data
initialization.
Signed-off-by: NPadmavathi Venna <padma.v@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add support for lookup of sdhci-s3c controller clocks using generic names
for s3c2416, s3c64xx, s5pc100, s5pv210 and exynos4 SoC's.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
[kgene.kim@samsung.com: fixed trailing whitespace]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The bus clocks previously sent through platform data to SDHCI controller
are removed.
Signed-off-by: NRajeshwari Shinde <rajeshwari.s@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Add a new EXYNOS4 compatible device tree enabled board file. Boards
based on the EXYNOS4 family of SoC's can use this as the machine/board
file. When using this machine fike, a corresponding device tree blob
which describes the board's properties should be supplied at boot time
to the kernel.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

PDMA controllers when instantiated from device tree are registered using
amba_device_register(). The registration process enables clock to the
controllers to read the peripheral id of the PDMA amba device.

In case of Exynos4, the clocks to the PDMA controllers are named as 'dma'
but amba_device_register() looks up the clock using the name 'apb_pclk'.
Hence, alias clocks with name 'apb_pclk' clock are created for clocks
with name 'dma'.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The pl330 device instances and associated platform data is required only
for non-device-tree builds. With device tree enabled, the data about the
platform is obtained from the device tree. For images that include both
dt and non-dt platforms, an addditional check is added to ensure that
static amba device registrations is applicable to only non-dt platforms.

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With the 'struct dma_pl330_peri' removed, the platfrom data for dma
driver can be simplified to a simple list of peripheral request ids.

Cc: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: NBoojin Kim <boojin.kim@samsung.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Samsung uart driver lookups the clock using the connection id 'clk_uart_baud'.
The uart clocks for all Samsung platforms are reorganized to register them
with the lookup name as required by the uart driver.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With clkdev based clock lookup support, the clock set and get operation
using clock names communicated between the samsung uart driver and the
SoC specific extension can be removed.

In addition to that, for each platform specific extension, add the
default clock selection, number of clock options for uart baud generator,
clock selection bit mask and shift values which is required by the
clkdev support in samsung uart driver.

The default clock selection value 'def_clk_sel' specifies the default clock
to be used as the source clock for baud rate generator in case the platform
code does not specify the same.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

With clkdev based clock lookup added to samsung serial driver, the use
of 'struct s3c24xx_uart_clksrc' to supply clock names in platform
data is removed from all the Samsung platform code.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Ramax Lo <ramaxlo@gmail.com>
Cc: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Enable conversion of device tree interrupt specifier to linux
virq domain for GIC controller.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The timer irqs statically mapped from linux irq numbers 11 to 15 are
moved to the end of the statically mapped linux irq space. The GIC PPI
and SPI interrupts are relocated to start from 16 and 32 of the linux
irq space. This is a required to add device tree support for GIC and
Interrupt combiner for EXYNOS4.

A new macro 'IRQ_TIMER_BASE' specifies a platform specific base of the
linux virq number for the timer interrupts. For exynos4, this base is
set to end of the linux virq space.  For the other S5P platforms, the
existing base '11' is retained.
Signed-off-by: NThomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources':
arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function)
arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once
arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.)
make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1
Reported-by: NKyungmin Park <kyungmin.park@samsung.com>
Acked-by: NChanghwan Youn <chaos.youn@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>

This patch adds remove_irq in place of disable_irq which
is correct equivalent function for setup_irq used in
exynos4_mct_tick_init.
Signed-off-by: NAmit Daniel Kachhap <amit.kachhap@linaro.org>
Tested-by: NInderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

  CC      arch/arm/mach-exynos/cpuidle.o
arch/arm/mach-exynos/cpuidle.c:36: error: 'THIS_MODULE' undeclared here (not in a function)
arch/arm/mach-exynos/cpuidle.c: In function 'exynos4_enter_idle':
arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'before' isn't known
arch/arm/mach-exynos/cpuidle.c:42: error: storage size of 'after' isn't known
arch/arm/mach-exynos/cpuidle.c:46: error: implicit declaration of function 'do_gettimeofday'
arch/arm/mach-exynos/cpuidle.c:52: error: 'USEC_PER_SEC' undeclared (first use in this function)
arch/arm/mach-exynos/cpuidle.c:52: error: (Each undeclared identifier is reported only once
arch/arm/mach-exynos/cpuidle.c:52: error: for each function it appears in.)
arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'after'
arch/arm/mach-exynos/cpuidle.c:42: warning: unused variable 'before'
make[1]: *** [arch/arm/mach-exynos/cpuidle.o] Error 1
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: Fixed as per Stephen's suggestion]
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The arch/arm/mach-exynos4 directory (CONFIG_ARCH_EXYNOS4) has
made for plaforms based on EXYNOS4 SoCs. But since upcoming
Samsung's SoCs such as EXYNOS5 (ARM Cortex A15) can reuse most
codes in current mach-exynos4, one mach-exynos directory will
be used for them.

This patch changes to CONFIG_ARCH_EXYNOS (arch/arm/mach-exynos)
but keeps original CONFIG_ARCH_EXYNOS4 in mach-exynos/Kconfig to
avoid changing in driver side.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>